Production of Bioethanol from Rice Straw Assisted by Cellulosic Enzyme Oyster Mushroom Stem Using Simultaneous Saccharification and Fermentation (SSF)

2019 ◽  
pp. 193-199
Author(s):  
Tatang Shabur Julianto ◽  
M. Arsyik Kurniawan S ◽  
Ikhwan Arifin

Bioethanol is an alternative energy source to replace fossil fuels that can be produced from agricultural waste such as rice straw. The fermentation process can help hydrolyze lignocellulosic compounds in rice straw into simple sugars and convert them into bioethanol. This study aims to determine the effect of fermentation time and the amount of intracellular cellulase enzyme extract from oyster mushroom stem on the levels of biethanol produced. The method used in making bioethanol is Simultaneous Saccharification and Fermentation (SSF). The bioethanol produced was then analyzed by gas chromatography and UV-Vis spectrophotometer. The result showed that the highest level of bioethanol was 14.52% obtained at 10 days fermentation time and the amount  of cellulase enzyme extract was 25 mL.

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shannon M. Hoffman ◽  
Maria Alvarez ◽  
Gilad Alfassi ◽  
Dmitry M. Rein ◽  
Sergio Garcia-Echauri ◽  
...  

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae, O. polymorpha, and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha, as well as Saccharomyces cerevisiae, and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.


2016 ◽  
Vol 27 (1) ◽  
pp. 22-35 ◽  
Author(s):  
Elsa Cherian ◽  
M. Dharmendira Kumar ◽  
G. Baskar

Purpose – The purpose of this paper is to optimize production of cellulase enzyme from agricultural waste by using Aspergillus fumigatus JCF. The study also aims at the production of bioethanol using cellulase and yeast. Design/methodology/approach – Cellulase production was carried out using modified Mandel’s medium. The optimization of the cellulase production was carried out using Plackett-Burman and Response surface methodology. Bioethanol production was carried out using simultaneous saccharification and fermentation. Findings – Maximum cellulase production at optimized conditions was found to be 2.08 IU/ml. Cellulase was used for the saccharification of three different feed stocks, i.e. sugar cane leaves, corn cob and water hyacinth. Highest amount of reducing sugar was released was 29.1 gm/l from sugarcane leaves. Sugarcane leaves produced maximum bioethanol concentration of 9.43 g/l out of the three substrates studied for bioethanol production. Originality/value – The present study reveals that by using the agricultural wastes, cellulase production can be economically increased thereby bioethanol production.


2020 ◽  
Author(s):  
Rehab Metwally ◽  
hassan Abu Hashish ◽  
Haitham Abd El-Samad ◽  
Mostafa Awad ◽  
Ghada Kadry

Abstract Background: The world depends almost on fossil fuels. This leads to depletion of oil and an increase in environmental pollution. Therefore, the researchers search to find alternative fuels. Waste cooking oil (WCO) was selected as feedstock for biodiesel production to eliminates the pollution problems. The agricultural waste is very big and without cost, this leads to the use of the rice straw in preparing a catalyst for biodiesel production. Results: The reusability of the acidic catalyst confirmed that the conversion efficiency was high until after 8 cycles of the production. The highest conversion efficiency of the converting WCO extended to 90.38% with 92.5% maximum mass yield and methyl ester content 97.7% wt. at the optimized conditions. The result was indicating that B15 is the best blend for thermal efficiency and specific fuel consumption. All emission concentrations decrease with increasing the engine load, especially for B15 fuels compared to the diesel oil.Conclusion: The novelty of this paper is assessing the methyl esters from the local WCO as an alternative fuel for diesel engines using a heterogeneous catalyst based on the agricultural waste. The performance of the diesel engines and its exhaust emissions have been experimentally investigated with the produced biodiesel of WCO as a blend (B10, B15, and B20) compared to the diesel.


Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 908 ◽  
Author(s):  
Tran Giang ◽  
Siriporn Lunprom ◽  
Qiang Liao ◽  
Alissara Reungsang ◽  
Apilak Salakkam

Simultaneous saccharification and fermentation (SSF) and pre-hydrolysis with SSF (PSSF) were used to produce hydrogen from the biomass of Chlorella sp. SSF was conducted using an enzyme mixture consisting of 80 filter paper unit (FPU) g-biomass−1 of cellulase, 92 U g-biomass−1 of amylase, and 120 U g-biomass−1 of glucoamylase at 35 °C for 108 h. This yielded 170 mL-H2 g-volatile-solids−1 (VS), with a productivity of 1.6 mL-H2 g-VS−1 h−1. Pre-hydrolyzing the biomass at 50 °C for 12 h resulted in the production of 1.8 g/L of reducing sugars, leading to a hydrogen yield (HY) of 172 mL-H2 g-VS−1. Using PSSF, the fermentation time was shortened by 36 h in which a productivity of 2.4 mL-H2 g-VS−1 h−1 was attained. To the best of our knowledge, the present study is the first report on the use of SSF and PSSF for hydrogen production from microalgal biomass, and the HY obtained in the study is by far the highest yield reported. Our results indicate that PSSF is a promising process for hydrogen production from microalgal biomass.


2012 ◽  
Vol 06 ◽  
pp. 715-720
Author(s):  
Maki Takano ◽  
Kazuhiro Hoshino

To develop biofuel production from waste lignocellulosic biomass materials the rice straw was selected one of renewable material and the degradation condition about pretreatment and enzymatic hydrolysis to obtain effectively fermentable sugars was investigated. Rice straw was pretreated by five kinds of methods and then the components ratio of rice straw was examined. First, the steam explosion was selected based on the degradability and the requirement energy. In addition, the best suitable combination of two cellulases to effective and economical hydrolyze was determined from the degradability of these pretreated rice straws. In the simultaneous saccharification and fermentation of the steam explosion rice straw by combining cellulase cocktail and a novel fermenting fungus, 13.2 g/L ethanol was able to product for 96 h.


2018 ◽  
Vol 156 ◽  
pp. 01010 ◽  
Author(s):  
Siti Maftukhah ◽  
Abdullah Abdullah

Rice straw is one of very abundant waste of agricultural and has not utilized maximally. This waste contain cellulose and potential in the manufacture of cellulase enzymes. Research on the production of cellulase enzyme from lignocellulose has been done a lot of enzyme activity is still low. This research using cellulose is 71.95% and conducted with 6 stages. First, the preparation of raw material. Second, the decrease of lignin content with alkali pretreatment. Third, the breeding of fungi Aspergillus niger ITBCC L74 . Fourth, incubation in the inoculum. Fifth, the production of cellulase enzyme by solid fermentation method. Finally, the analysis includes protein content, enzyme activity, enzyme characterization and kinetics of enzymatic reactions. The highest enzyme activity of this study is 3.12 U/ml and protein content is 0.34 mg/ml with fermentation time is 4 day and water content is 75%. In enzyme characterization obtained optimum pH and temperature are 4 and 60°C, respectively. And obtained paramatic kinetic are Vmax and Km for 40, 50, 60 and 70°C temperature are Vmax: 6.42; 4.7; 5.82 and 4.46 U/ml and Km : 1.32; 0.38; 0.32; and 0.12%, respectively.


Sign in / Sign up

Export Citation Format

Share Document