scholarly journals The Creation Process of The First Particle from the Absolute Void

Author(s):  
Shivan Jumaa

In this study, we discuss the properties of absolute vacuum space and how these properties can play a vital role in creating a mechanism in which the very first particle gets created simultaneously everywhere and we find the limit in which when the absolute vacuum volume reaches will lead to the collapse that leads to the creation of the first particle. This discussion is made following to the elementary dimensions theory study that was peer-reviewed at the end of 2020, everything in the universe is made from four elementary dimensions, these dimensions are the three spatial dimensions (X, Y, and Z) and the Vacuum resistant as the factor of change among the four, time itself wasn’t considered as the fourth dimension, rather time corresponds to a factor of change, and during the research it was found out that the Vacuum resistant is the factor of change in the Absolute Vacuum space, where time is a hypothetical concept, that represents changes during certain events compared to a constant change rate event.Therefore, time does exist, but as a factor of change, and as the Vacuum resistant in the absolute vacuum space, Time= factor of change= Vacuum resistant. In the study, the internal and external vacuum resistant volume equivalent is found, External Vacuum resistant=3.2857602*10^15 *mass. This equation is used to identify the amount of Free external vacuum resistant created during nuclear fission and fusion: Initial mass of the excited nucleuses mass of the created new nucleuses+ 3.2857602*10^15 * the lost Mass. In elementary dimensions, the energy created during nuclear reactions is equivalent to the free External vacuum resistant created through nuclear reactions, and mass is equivalent to the internal Vacuum resistant.

Author(s):  
Shivan Jumaa

In this study, we discuss the properties of absolute void space or the universe at zero seconds, and how these properties play a vital role in creating a mechanism in which the very first particle gets created simultaneously everywhere and we find the limit in which when the absolute void volume reaches will lead to the collapse that leads to the creation of the first particle. This discussion is made following the elementary dimensions theory study that was peer-reviewed at the end of 2020, everything in the universe is made from four elementary dimensions, these dimensions are the three spatial dimensions (X, Y, and Z) and the Void resistant as the factor of change among the four, time itself wasn’t considered as the fourth dimension, rather time corresponds to a factor of change, and during the research, it was found out that the Void resistant is the factor of change in the Absolute Void space, where time is a hypothetical concept, that represents changes during certain events compared to a constant change rate event. Therefore, time does exist, but as a factor of change, and as the Void resistant in the absolute void space, Time= factor of change= Void resistant. In the study, the internal and external void resistant volume equivalent is found, External Void resistant=3.2857602*10^15 *mass. This equation is used to identify to amount of Free external void resistant created during nuclear fission and fusion: The initial mass of the excited nucleuses → mass of the created new nucleuses+ 3.2857602*10^15 * the lost Mass. In elementary dimensions, the energy created during nuclear reactions is equivalent to the free External void resistant created through nuclear reactions, and mass is equivalent to the internal Void resistant.


Author(s):  
Shivan Jumaa

In this study, we discuss the dimensions of absolute void space or the universe at zero seconds, and how these dimensions play a vital role in creating a mechanism in which the very first particle gets created simultaneously everywhere and we find the limit in which when the absolute void volume reaches will lead to the collapse that leads to the creation of the first particle. These dimensions are four, three spatial dimensions (X, Y, and Z) and the Void resistant. This discussion is made following the elementary dimensions theory study that was peer-reviewed at the end of 2020, everything in the universe is made from four elementary dimensions.


Author(s):  
Shivan Jumaa

In this study, we discuss the properties of absolute void space or the universe at zero seconds, and how these properties play a vital role in creating a mechanism in which the very first particle gets created and we find the limit in which when the absolute void volume reaches will lead to the collapse that leads to the creation of the first particle. Later we discuss the standard model explanation through the elementary dimensions theory, as according to the elementary dimensions theory study that was peer-reviewed at the end of 2020, everything in the universe is made from four elementary dimensions, these dimensions are the three spatial dimensions (X, Y, and Z) and the force equivalent.


Author(s):  
Malgorzata Szczesniak

This paper concerns the main physical, philosophical and existential aspects of the ‘pre-physical’ stage in the evolution of the universe. I will discuss the ways that contemporary cosmology tries to: (1) solve the problem about the time period of the ‘pre-physical’ state; (2) answer the question whether the beginning of time was at the same time as the beginning of the existence of the Universe; (3) answer another whether the Big Bang was an absolute beginning of the existence of the Universe or only a beginning of some stage of its evolution; (4) respond to another question whether the absolute beginning of the Universe inevitably implies its creation by God or whether it allows for the possibility of the creation of the Universe in a natural way; and (5) discuss the issue of the ‘singular’ moment. All of these questions, in particular the last one, will be discussed with reference to the latest achievements in the fields of physics and cosmology.


2020 ◽  
Vol 3 (1) ◽  
pp. 156-160
Author(s):  
Khurshida Salimovna Safarova ◽  
Shakhnoza Islomovna Vosiyeva

Every great fiction book is a book that portrays the uniqueness of the universe and man, the difficulty of breaking that bond, or the weakening of its bond and the increase in human. The creation of such a book is beyond the reach of all creators, and not all works can illuminate the cultural, spiritual and moral status of any nation in the world by unraveling the underlying foundations of humanity. With the birth of Hoja Ahmad Yassawi's “Devoni Hikmat”, the Turkic nations were recognized as a nation with its own book of teaching, literally, the encyclopedia of enlightenment, truth and spirituality.


2020 ◽  
Author(s):  
Deep Bhattacharjee

Gravity has been leaking in higher dimensions in the bulk. Gravity being a closed string is not attached or does not have any endpoints unlike photons to any Dirichlet (p)-Branes and therefore can travel inter-dimensional without any hindrance. In LHC, CERN, Gravitons are difficult to detect as they last for such a short span of time and in most of the cases invisible as because they can escape to higher spatial dimensions to the maximum of 10, as per 'M'-Theory. Gravity being one of the 4-Fundamental forces is weaker than all 3 (strong and weak nuclear force, electromagnetism) and therefore a famous problem has been made in particle physics called the 'hierarchy problem'. Through comprehensive analysis and research I have come to the conclusion that if dimension is 5 (or 4 if we neglect the temporal dimensions) then an old approach is there for the compactification of the dimensions as per Kaluza-Klein theory and the most important implications of this theory is that an unification of electromagnetism with gravitation occurs in the fifth dimensions, therefore we can conclude that both the charge (electric as well as magnetic and gravity) are dependent of each other in case of Dimensions greater than 4 (5 if time is added). Now, basic principles of electromagnetic theory states that the field-flux density through a closed surface like a T 2 Torus when integrated over the surface area leads to a zero flux. That means there is no flux outside this closed surface integral. However, if the surface is open then the field flux density is not zero and this preserves the concept of magnetic monopoles. However, in a paper in 1931,[1] Dirac approaches monopole theory of magnetism through a different perspectives that, if all the electrical charges of the universe is quantized[2] then there is a suitable (not yet proved though) existence of monopoles; however this are not well understood as of today's scenario. In condensed matter physics, plasma physics and magneto hydrodynamics, there are flux tubes and as the both ends of the flux tubes are independent of each other then the net flux through the cylinder is zero as the amount of field lines entering the tube on one side is equal to the amount of field lines exit from the other end. And in the sides of the cylinder or the flux tube there is no escape of field lines, hence, net flux is conserved. There also exists a type of 'Quasiparticles' that can act as a monopole.[3][4][5] Now, from the perspectives of the Guess law of electromagnetism, if there exists a magnetic monopole then the net charge or flux density over a surface is not zero rather the divergence of the flux density B is 4 [6]and an alternative approach of the 'monopole' can be achieved by increasing the spatial dimensions by a factor of 1 or more. The Gravity has no such poles and therefore can be considered as a unipolar flux density existing throughout the universe and is applicable to the inverse square law of decreasing magnitude via distance as 1/r 2. However, a magnet is always of bipolar with a north and South Pole. If a magnet can be broken then also the broken parts develop the other poles and become bipolar. However, there are tiny domains inside a magnet and if a magnet can be heated to approx. 700℃ then all the poles disappeared and if its cooled quickly, rather very quickly then the tiny domains inside the magnet would not get enough time to rearrange themselves and multipolar magnet is developed therefore to preserve the bipolar properties, the magnet should be cooled slowly allowing the time given to the tiny domains top rearrange themselves. Therefore, even multipole can be achieved quite easily but not the monopoles. So, the equation for a closed surface integral of a flux density without monopole is ∯(S) B dS = 0 or ∇ • B = 0 and that closed surface can be considered as 2 types namely (we will discuss about torus) as because in string theory compactification of higher spatial dimensions occurs in torus.


2019 ◽  
Vol 24 (2) ◽  
pp. 343-367
Author(s):  
Roberto Paura

Transhumanism is one of the main “ideologies of the future” that has emerged in recent decades. Its program for the enhancement of the human species during this century pursues the ultimate goal of immortality, through the creation of human brain emulations. Therefore, transhumanism offers its fol- lowers an explicit eschatology, a vision of the ultimate future of our civilization that in some cases coincides with the ultimate future of the universe, as in Frank Tipler’s Omega Point theory. The essay aims to analyze the points of comparison and opposition between transhumanist and Christian eschatologies, in particular considering the “incarnationist” view of Parousia. After an introduction concern- ing the problems posed by new scientific and cosmological theories to traditional Christian eschatology, causing the debate between “incarnationists” and “escha- tologists,” the article analyzes the transhumanist idea of mind-uploading through the possibility of making emulations of the human brain and perfect simulations of the reality we live in. In the last section the problems raised by these theories are analyzed from the point of Christian theology, in particular the proposal of a transhuman species through the emulation of the body and mind of human beings. The possibility of a transhumanist eschatology in line with the incarnationist view of Parousia is refused.


Engevista ◽  
2017 ◽  
Vol 19 (5) ◽  
pp. 1496
Author(s):  
Relly Victoria Virgil Petrescu ◽  
Raffaella Aversa ◽  
Antonio Apicella ◽  
Florian Ion Petrescu

Despite research carried out around the world since the 1950s, no industrial application of fusion to energy production has yet succeeded, apart from nuclear weapons with the H-bomb, since this application does not aims at containing and controlling the reaction produced. There are, however, some other less mediated uses, such as neutron generators. The fusion of light nuclei releases enormous amounts of energy from the attraction between the nucleons due to the strong interaction (nuclear binding energy). Fusion it is with nuclear fission one of the two main types of nuclear reactions applied. The mass of the new atom obtained by the fusion is less than the sum of the masses of the two light atoms. In the process of fusion, part of the mass is transformed into energy in its simplest form: heat. This loss is explained by the Einstein known formula E=mc2. Unlike nuclear fission, the fusion products themselves (mainly helium 4) are not radioactive, but when the reaction is used to emit fast neutrons, they can transform the nuclei that capture them into isotopes that some of them can be radioactive. In order to be able to start and to be maintained with the success the nuclear fusion reactions, it is first necessary to know all this reactions very well. This means that it is necessary to know both the main reactions that may take place in a nuclear reactor and their sense and effects. The main aim is to choose and coupling the most convenient reactions, forcing by technical means for their production in the reactor. Taking into account that there are a multitude of possible variants, it is necessary to consider in advance the solutions that we consider them optimal. The paper takes into account both variants of nuclear fusion, and cold and hot. For each variant will be mentioned the minimum necessary specifications.


Author(s):  
Roger H. Stuewer

Nuclear physics emerged as the dominant field in experimental and theoretical physics between 1919 and 1939, the two decades between the First and Second World Wars. Milestones were Ernest Rutherford’s discovery of artificial nuclear disintegration (1919), George Gamow’s and Ronald Gurney and Edward Condon’s simultaneous quantum-mechanical theory of alpha decay (1928), Harold Urey’s discovery of deuterium (the deuteron), James Chadwick’s discovery of the neutron, Carl Anderson’s discovery of the positron, John Cockcroft and Ernest Walton’s invention of their eponymous linear accelerator, and Ernest Lawrence’s invention of the cyclotron (1931–2), Frédéric and Irène Joliot-Curie’s discovery and confirmation of artificial radioactivity (1934), Enrico Fermi’s theory of beta decay based on Wolfgang Pauli’s neutrino hypothesis and Fermi’s discovery of the efficacy of slow neutrons in nuclear reactions (1934), Niels Bohr’s theory of the compound nucleus and Gregory Breit and Eugene Wigner’s theory of nucleus+neutron resonances (1936), and Lise Meitner and Otto Robert Frisch’s interpretation of nuclear fission, based on Gamow’s liquid-drop model of the nucleus (1938), which Frisch confirmed experimentally (1939). These achievements reflected the idiosyncratic personalities of the physicists who made them; they were shaped by the physical and intellectual environments of the countries and institutions in which they worked; and they were buffeted by the profound social and political upheavals after the Great War: the punitive postwar treaties, the runaway inflation in Germany and Austria, the Great Depression, and the greatest intellectual migration in history, which encompassed some of the most gifted experimental and theoretical nuclear physicists in the world.


Sign in / Sign up

Export Citation Format

Share Document