scholarly journals TINGKAT KEPUASAN AUDITI INSPEKTORAT JENDERAL KEMENTERIAN PERTANIAN

2016 ◽  
Vol 23 (2) ◽  
pp. 185
Author(s):  
Evy Fachraini Winniasri

Level of Auditee Satisfaction is important for the Inspectorate General of the Ministry of Agriculture, in order to identify the weakness of each dimension in delivering internal controlling activity and to determine the performance of internal controlling system in the Ministry of Agriculture. The objectives of this study are to analyze auditee satisfaction of internal control held by Inspectorate, to determine factors influencing auditee satisfaction, and to formulate strategies in increasing auditee satisfaction. Service Quality model was used to measure the perception of vertical institution under the authority of the Ministry of Agriculture on services received from Inspectorate. There were five dimensions that were measured, i.e tangibility, reliability, assurance, responsiveness, and empathy. Data were collected from 193 respondents. The study used Structural Equation Modelling (SEM) and software LISREL for data processing. The result reflected that all variables were significantly correlated to each dimension of Service Quality instrument and significantly influenced auditee satisfaction. Satisfactions were measured through overall satisfaction, the function of internal control related with non audit activity and the quality of audit report. Tangibility was the most significant factor influencing auditee satisfaction.

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Agus Sriyanto

ABSTRACT:Improving the quality of education becomes very important nowadays to meet the increasing demands of graduates’ future institutions. This research adopts five dimensions of service quality initiated by Parasuraman, Zeithaml and Berry (servqual) to assess the quality of academic services affecting student satisfaction. Once the determinants are known, they can be used by policy makers to improve student satisfaction levels. After identifying the determinant factors, policy makers can use them to improve the level of satisfaction of students. There are 100 respondents who participated in this research. The data was collected using surveys and analyzed using structural equation modeling with Smart PLS 3.0. The results showed that among five hypotheses tested, all variables have the positive influence, however, there are two latent variables which have significant associations, while the others have not. Responsiveness and empathy have positive and significant impact on the student satisfaction, while tangible, reliability and assurance have a positive impact but not significant. Keywords: customs student satisfaction, service quality, servqual, SEM.ABSTRAK:Meningkatkan kualitas pendidikan menjadi sangat penting dewasa ini untuk memenuhi tuntutan kebutuhan unit pengguna yang semakin meningkat. Penelitian ini mengadopsi lima dimensi kualitas jasa yang digagas oleh Parasuraman, Zeithaml dan Berry (Servqual) untuk menilai kualitas layanan akademik yang mempengaruhi kepuasan mahasiswa. Setelah faktor-faktor penentu dari dimensi servqual dapat diketahui maka faktor-faktor tersebut dapat digunakan oleh pembuat kebijakan untuk meningkatkan tingkat kualitas layanan kepada mahasiswa. Ada 100 responden di pilih secara acak dari total populasi yang berpartisipasi dalam penelitian ini. Data dikumpulkan dengan menggunakan survei online dan dianalisis dengan pemodelan persamaan struktural dengan bantuan software Smart PLS 3.0. Hasil penelitian ini menunjukkan bahwa dari kelima dimensi servqual, semua variabel memiliki pengaruh positif terhadap kepuasan mahasiswa, namun dari lima variabel tersebut hanya dua variabel laten yang mempunyai pengaruh signifikan, sementara tiga variabel yang lain tidak signifikan. Daya tanggap dan empati berpengaruh positif dan signifikan terhadap kepuasan siswa, sedangkan bukti fisik, keandalan dan jaminan memiliki dampak positif namun tidak signifikan.Kata Kunci: kepuasan, Mahasiswa Bea dan Cukai, kualitas layanan, Servqual, SEM                  


Author(s):  
Dheeraj P. Sharma ◽  
Shivendra K. Pandey ◽  
Ashish K. Gupta ◽  
Rajat Sharma

The purpose of this paper is to examine the suitability of SERVQUAL for trade shows. Theobjective is to identify the significant SERVQUAL dimensions and their relative importance toincrease the purchase intention of visitors to a trade show. The study uses a survey of 400visitors to a big trade fair. Structural equation modelling was used to determine the relativeimportance of the dimensions. Results suggest that SERVQUAL is well suited for assessing theservice quality of trade shows. The tangibility and assurance are the two most significant factorsinfluencing the purchase intention of trade show visitors. Exhibitors should enhance tangibilityin trade shows by methods such as display of product or product prototypes, brochures, andscreens. Further, they should increase assurance by displaying medals and awards won, qualitycertifications achieved, testimonials of past satisfied consumers, and experienced salespeople atthe trade show counters. Trade show organisers should attract big brands for the exhibition toenhance assurance. The present study contributes to the ongoing debate on the relevance ofSERVQUAL in the trade show context. The study demonstrates that SERVQUAL is a decentmeasure to study service quality in trade shows even though the majority literature claimsotherwise. Further, the present research prioritises the SERVQUAL dimensions, helpingmanagers to design customer-oriented sales strategies.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ayman Abu-Rumman ◽  
Rasha Qawasmeh

PurposeEducation plays a key role in socio-economic development and globalization has increased the numbers of students wanting to study abroad. Attracting international students is therefore an important objective for universities as international students open up opportunities to bring economic, cultural and academic benefits to both the universities themselves and to the countries in which they are located. This study therefore aimed to assess student satisfaction with a Jordanian university using the dimensions of quality contained within the established SERVQUAL model.Design/methodology/approachTo achieve these goals, quantitative data was collected from international students attending one university located in Jordan via a questionnaire survey, using a randomized sample. Structural equation modeling (SEM) was used to analyze the construct validity, and correlations between student satisfaction and the different dimensions of quality were tested.FindingsConsistent with other studies, the findings demonstrated that the five dimensions of service quality, i.e. tangibility, reliability, responsiveness, assurance and empathy, and the university of study, have a strong relationship with student satisfaction. However, there was no statistically significant correlation between country satisfaction and the tangibility and assurance sub-dimensions of quality.Practical implicationsPractical implications – The findings of this study are of interest and practical benefit to university leaders in developing their quality and student acquisition strategies.Originality/valueThis study makes a useful contribution to the growing body of evidence of service quality in higher education set within the context of a developing country.


2014 ◽  
Vol 6 (1) ◽  
pp. 30-42 ◽  
Author(s):  
Seyed Hamid Reza Ghasemian ◽  
Naser Azad ◽  
Hamid Seyedaliakbar

Purpose – The purpose of this research is analyzing the service quality in capital industrial goods sector by developing a model and new view. So the authors studied several models and articles for exploring the effective variables on service quality and tested them in Aras Haitian Machinery Company that is one of the biggest manufacturers of plastic machinery in Iran and China. Design/methodology/approach – The statistics population included all customers of Aras Haitian Company in 2012 that were scattered in whole Iran and all of them are manufacturers of industrial goods. And finally 102 customers chose by using simple random sampling method. The way of SPSS statistical analysis software was used for exploratory factor analysis and LISREL software for structural equation model (SEM). Findings – Results indicated that there were three new factors (customer perception, customer relation and specialized competencies) that affected on perceived service quality of customers in capital industrial goods sector. The findings showed that these three factors were measured by ten subdimensions through a SEM. Originality/value – This study is the first to explore the effective variables on perceived service quality in capital industrial goods sector with viewpoint of service dominant logic in Iran andalso proposed the first SEM under the rubric of industrial service quality model in this section.


MBIA ◽  
2021 ◽  
Vol 20 (2) ◽  
pp. 123-140
Author(s):  
Mardesah Mardesah ◽  
Rabin Ibnu Zainal

This study aims to determine the assessment of the quality of administration staff services at the Education Office of South Sumatra Province (Dinas Pendidikan Provinsi Sumatera Selatan) based on the analysis results of five dimensions of service quality in the SERVQUAL (service quality) model, named Tangible (Physical Evidence), Empathy (Care), Realibility, Responsiveness (Quick Response) and Assurance (Certainty). The collected data was analyzed using a questionnaire in the form of a SERVQUAL scale that describes the gap (GAP) of the expected service quality between expectations and reality (perceptions) received by the Educators and Education Personnel of the South Sumatra Province Education Office. The results of the study indicate that the quality of personnel administration services has not been a satisfactory because of the dimensions that have a minus or negative value, named: Realibility -0.15 and Responsiveness -0.46. Therefore, the South Sumatra Provincial Education Office(Dinas Pendidikan Provinsi Sumatera Selatan) needs to improve the quality of administrative services so that it is optimal and changes the gap to a positive value. Recommendations for improvement are made using the Fishbone Diagram and the Kaizen 5W 1 H method. The fishbone chart is useful for showing the main factors that affect quality and have an impact on service quality. If the problems and causes are known for certain, then the corrective actions and steps will be easier to conduct. To create a Fishbone Diagram, the Kaizen Method Tools are used by asking several questions on the basis of 5W + 1H (what, who, why, where, when and who). Keywords: : SERVQUAL, GAP analysis, Administrative Services Abstrak Penelitian ini bertujuan untuk mengetahui penilaian kualitas pelayanan administrasi kepegawaian Dinas Pendidikan Provinsi Sumatera Selatan didasarkan pada hasil analisa lima dimensi kualitas jasa dalam model SERVQUAL (service quality) yaitu Tangible (Bukti Fisik), Emphaty (Kepedulian), Realibility (Keandalan), Responsiveness (Keandalan/Cepat Tanggap) dan Assurance (Kepastian). Data yang terkumpul dianalisa menggunakan kuesioner berupa skala SERVQUAL yang menggambarkan kesenjangan (GAP) kualitas pelayanan yang diharapkan antara  (ekpetasi) dan kenyataan (persepsi) yang diterima oleh Tenaga Pendidik dan Tenaga Kependidikan Dinas Pendidikan Provinsi Sumatera Selatan. Hasil penelitian menunjukkan bahwa kualitas pelayanan administrasi kepegawaian belum memuaskan karena ada  dimensi  yang bernilai minus atau negative yaitu : Realibility -0,15 dan Responsiveness -0,46. Oleh karena itu Dinas Pendidikan Provinsi Sumatera Selatan perlu meningkatkan kualitas pelayanan administrasi agar optimal dan merubah Gap menjadi bernilai positif. Rekomendasi perbaikan dilakukan dengan Diagram Fishbone dan Metode Kaizen 5W 1 H. Diagram tulang ikan (fishbone chart) berguna untuk memperlihatkan faktor-faktor utama yang berpengaruh pada kualitas dan mempunyai akibat pada kualitas pelayanan. Apabila masalah dan penyebab sudah diketahui secara pasti, maka tindakan dan langkah perbaikan akan lebih mudah dilakukan. Untuk membuat Diagram Fishbone digunakan Tools Metode Kaizen yaitu  dengan teknik bertanya dengan pertanyaan, dengan dasar 5W+1H  yaitu what, who, why, where, when dan who. Kata Kunci: SERVQUAL, GAP analysis, Pelayanan Administrasi.


2014 ◽  
Vol 6 (1) ◽  
pp. 23
Author(s):  
Supriyanto Supriyanto ◽  
Mutia Nur Estri ◽  
Agustini Tripena Br.Sb.

Increasingly strong competition in intercollegiate and students who increasingly selective and knowledgeable require universities to continue to improve his ministry. Matter requires a knowledge of the conditions for this service, that has adapted to student expectations or not . This study aimed to determine the extent to which level the match between the expected service quality and perceived student at Department of Mathematics and Natural Sciences Unsoed and explain the influence of the five dimensions of service quality that is tangibles, reliability, responsiviness, assurance and empathy for student satisfaction and loyalty. Results of the study was assessment of the quality of student services at the Department of Mathematics and Natural Sciences Unsoed is perceived service quality is still below the expected service quality , perceived still not satisfactory. Five dimensions of service quality consisting of tangibles, reliability, responsiveness, assurance, and empathy, positive effect on student satisfaction. Satisfaction indirect influence on student loyalty and there is a direct influence of the five dimensions of service quality on loyalty through student satisfaction. Student loyalty translated in expressing positive things about the Department of Mathematics and Natural Sciences to others , recommending courses at the Department of Mathematics and Natural Sciences to the others, recruiting new employees from alumni, and ready to provide assistance if needed.


Author(s):  
Yogendra Pal Bharadwaj, Mukesh Singh

In modern era of globalization, the services being offered by the public transportation require to gauge sensitivity about the services offered to the common masses. In this context, this study examined the perception of commuters on service quality offered by Delhi Metro Rail Corporation and its impact on the commuter’s satisfaction. Therefore, five dimensions of service quality have been taken (reliability, tangibility, empathy, safety & security, commuters’ friendliness) as predicting variables towards the commuters’ satisfaction of DMRC. This research was carried out on behalf of a convenience sampling approach using basic condition and structural equation modelling with an aggregate of 1045 questionnaires distributed among commuters via electronic form as well as simple form. The results of factual tests show that four out of five predictive variables viz., commuters’ friendliness, tangibility, safety & security, empathy have pragmatic percussion, while reliability and commuter’s friendliness has no remarkable influence on customer’s satisfaction.


2019 ◽  
Vol 74 (3) ◽  
pp. 349-370 ◽  
Author(s):  
Syed Zamberi Ahmad ◽  
Norita Ahmad ◽  
Avraam Papastathopoulos

Purpose This study aims to delve upon customer satisfaction and service quality within small- and medium-sized hotels (SMSHs) by using a modified SERVQUAL model. Design/methodology/approach Data for the study were collected from a sample of 253 guests of varying nationalities who stayed at SMSHs of one-to-three-star ratings in the UAE. Moreover, 15 face-to-face interviews were conducted. The influence of the five dimensions of the SERVQUAL model on visitors’ satisfaction was explored using structural equation modelling. Findings The results indicated that three out of the five dimensions of SERVQUAL, namely, tangible, responsiveness and assurance, have significant positive impact on visitors’ satisfaction of the SMSHs Industry. The remaining two dimensions of SERVQUAL, reliability and empathy, have no significant impact on visitors’ satisfaction. Originality/value This study provides a major contribution in that it offers the potential to examine a vastly under researched area of customer satisfaction and service quality of SMSHs in a developing country.


2018 ◽  
Vol 7 (2.29) ◽  
pp. 865
Author(s):  
Hamza Imhimmed Mohamed Irtema ◽  
Amiruddin Ismail ◽  
Muhamad Nazri Borhan ◽  
Hassan. M Abdelsalam ◽  
Abdurauf. B.Z Alshetwi ◽  
...  

The quality of service is a measurement of the level of service provided against the expectations of customers. This research examines the behaviour of passengers using public transport with respect to the service quality of public transit. A questionnaire was answered by 412 passengers at one of the main railway stations, Kuala Lumpur Sentral. Empirical data were extracted based on the information collected from the survey. Structural equation modelling was used to examine the measurement model. The findings of the study reveal that public transport passengers are significantly influenced by service attributes, for example, vehicle safety, cleanliness of the facility, and management of complaints. These findings identify the important service attributes that public transportation services in Kuala Lumpur need to prioritise. This study will help ascertain whether service quality meets or exceeds the expectations of the passengers. 


2020 ◽  
Vol 1 (1) ◽  
pp. 32-48
Author(s):  
Haries Setiawan ◽  
JFX. Susanto Sukiman

The purpose of this study was to determine the effect of service quality on loyalty through debtor satisfaction. The research was done in the BRI Bank Surabaya Branch of Genteng Kali Surabaya. The method used in this research was quantitative. The variables in this study were classified into three, including service quality as an independent variable, loyalty as a dependent variable, and satisfaction as an intervening variable. Quality of service in this study was divided into five dimensions including tangibles, reliability, responsiveness, assurance, and empathy. The analytical method used was structural equation modeling (SEM) with the help of Smart-PLS software. The results found only two variables found to have a positive and significant effect between variables, including assurance of satisfaction and satisfaction with loyalty. This indicated that companies still need to improve service quality from all dimensions.


Sign in / Sign up

Export Citation Format

Share Document