scholarly journals Designing a Microstrip Patch Antenna in Part of Ultra-Wideband Applications

2020 ◽  
Vol 17 (4) ◽  
pp. 1216
Author(s):  
Wa'il A. Godaymi Al-Tumah ◽  
Raed Shaaban ◽  
Zeki Ahmed
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Frequency Range ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Rectangular Microstrip Antenna

In this work, a simulated study was carried out for designing a novel spiral rectangular patch of microstrip antenna that is used in ultra-wideband applications by using a high frequency structure simulator software (HFSS). A substrate with dielectric constant of 4.4 and height 2.10 mm (commercial substrate height available is about 0.8-1.575 mm) has been used for the design of the proposed antenna. The design basis for enhancing bandwidth in the frequency range 6.63 - 10.93 GHz is based on increasing the edge areas that positively affect the antenna's efficiency. This design makes the designed antenna cost less by reducing the area of the patch. It has been noticed that the bandwidth of the antenna under this study is increasing to 4.30 GHz or 61% compared with 3.6% for the standard rectangular microstrip antenna with the same dimensions of the proposed antenna. The antenna also maintains the voltage standing wave ratio of 1.09 at resonant frequency 7.07 GHz, return loss -27.07 dB, and the amount of impedance in real and imaginary parts 51.5Ω and 3.3Ω, respectively.

scholarly journals Effects of the Feedline Position on Microstrip Patch Antenna Performance

2021 ◽  
Vol 06 (12) ◽  
Author(s):  
Ali Recai Celik ◽  
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Line Position ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Performance ◽  
Basic Characteristics

Abstract In this study, it is aimed to demonstrate the effects of the feed line position on the operating frequency, return loss and bandwidth of the rectangular patch microstrip antenna. For this purpose, a compact-sized antenna that can operate at 2.4-2.45 GHz frequencies is designed in High Frequency Structure Simulator (HFSS) program. Then, the position of the feedline is changed horizontally and vertically, and its effects are observed. The results obtained after the modificaions are given and discussed. It is stated that the feed line position is a very important parameter that affects the basic characteristics of the antenna.

scholarly journals Design of a Dual Band Rectangular Microstrip Antenna

2018 ◽  
Vol 3 (4) ◽  
pp. 438-443
Author(s):  
Ranjan Mishra ◽  
Raj Gaurav Mishra ◽  
R. K. Chaurasia
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Geometrical Parameters ◽  
Microstrip Patch ◽  
Ansoft Hfss ◽  
Rectangular Microstrip Antenna

The objective of the paper is to design and investigate a rectangular microstrip antenna that covers the band from 2.4 to 3.6 GHz. The proposition consolidates investigation of fundamentals of microstrip patch antenna. A progression of simulation in Ansoft HFSS (High Frequency System Simulation) has been carried out to discover the dual operating frequency. The qualities of the patch antenna rely on its different geometrical parameters. The investigation is carried in terms of two prime factors: Return loss and radiation pattern.

scholarly journals esign of a 24GHz Rectangular Microstrip Patch Antenna for Wireless Application

2021 ◽  
Vol 9 (VI) ◽  
pp. 23-27
Author(s):  
Dr. N. Srinivasa Rao
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Software Tool ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Wireless Application ◽  
Rectangular Microstrip Patch Antenna ◽  
Rectangular Microstrip Antenna ◽  
Ku Band

The microstrip antenna required for higher frequency application is to be light in weight, easy to fabricate and small in size. As the applications in S-band and Ku-band are increasing with the increase in technology the requirement for higher data rate so the proposed work is to design a 24GHz (ka band) rectangular microstrip antenna with stripline feeding, return loss to be less than -20dB and VSWR less than 0.5. The substrate is chosen to be RT/duroid 5880 with relative permeability 2.2. it is capable of covering satellite application, telemetry. HFSS software tool is used to design the antenna.

scholarly journals E SHAPE MICROSTRIP PATCH ANTENNA WITH RECTANGULAR AND CIRCULAR SLOT

2020 ◽  
Vol 5 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Priyanka Jain ◽  
Raghavendra Sharma ◽  
Vandana Vikas Thakre
Keyword(s):  
Loss Tangent ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Microstrip Patch ◽  
Rectangular Patch

In this proposed design a Rectangular E shaped micro-strip patch antenna is present with rectangular and circular slot within the Rectangular patch which operate at frequency 2.4 GHz. By proposed antenna design and coaxial feeding at suitable place  the resultant return loss, VSWR and bandwidth will be find out. For the propose microstrip antenna we have use FR-4 substrate which contain permittivity of 4.4 and thickness 1.5, loss tangent is 0.02. HFSS simulation software is used for designing and analysis.

scholarly journals A Compact Inverted Y Slot Rectangular Microstrip Patch Antenna for Bluetooth Applications

2018 ◽  
Vol 11 (2) ◽  
pp. 413 ◽  
Author(s):  
Ramesh Kumar Verma ◽  
D K Srivastava
Keyword(s):  
Frequency Band ◽  
Method Of Moments ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Rectangular Microstrip Antenna

<p>In this paper a compact and slotted rectangular microstrip antenna is designed at 3.00GHz frequency and it is loaded by inverted Y slot so that the bandwidth of microstrip antenna is improved upto 36.30%. The area of radiating patch for 3.00GHz frequency is 711.36mm<sup>2</sup>.The proposed antenna design has frequency band in the frequency range 2.097GHz to 3.030GHz. The proposed antenna is resonating at 2.45GHz and area of radiating patch at this frequency is 1077.97mm<sup>2</sup>. Hence the size of antenna is reduced by 34% corresponding to resonance frequency 2.45GHz. This frequency band is suitable for Bluetooth and other wireless communication applications. The proposed slotted microstrip antenna is directly feed by 50Ω microstrip line feed. The proposed antenna is simulated by IE3D simulation software based on method of moments.<em></em></p>

Study of the Feeding Techniques of Microstrip Antenna at 28 GHz for 5G Applications

2015 ◽  
Vol 781 ◽  
pp. 49-52 ◽  
Author(s):  
Noor Ainniesafina Zainal ◽  
Muhammad Ramlee Kamarudin ◽  
Nor Hidayu Shahadan ◽  
Jamal Nasir ◽  
Mohsen Khalily ◽  
...  
Keyword(s):  
Reflection Coefficient ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Frequency Structure ◽  
Feeding Techniques

This work presents a simulation of two different feeding techniques of microstrip patch antenna for 28GHz, 5G applications. The antenna fed by inset feed line and coplanar feed line. The simulated results using High Frequency Structure Simulator (HFSS) shows that both the reflection coefficient of less than-10dB have been achieved over a frequency of 28GHz; demonstrate a gain of 7.96dBi and 5.72dBi for the inset feed line and coplanar feed line, respectively.

scholarly journals Optimized Bandwidth Enhanced Wideband Microstrip Antenna for 5G Applications

2021 ◽  
Vol 11 (2) ◽  
pp. 43-47
Author(s):  
Navneet Singh ◽  
◽  
Dr. Amit Jain ◽  
Dr. Dinesh Kumar Singh ◽  
◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Single Port ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Fractional Bandwidth ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Rectangular Patch

In this article, a single port with truncated corner and common T-shaped notch loaded microstrip patch antenna for bandwidth enhancement is presented which is useable for mid band of 5G applications. The design of this prototyped antenna is obtained by loading truncated corner and T-shaped notch on rectangular patch antenna having 50 Ω microstrip line feed. The optimized antenna 5 is selected as proposed antenna at design frequency 3 GHz among antenna 1- antenna 5after study of simulated results through IE3D Mentor Graphics simulation software. Proposed antenna covers a wide bandwidth from 2.39 to 4.04 GHz and fractional bandwidth of 51.3% with pair of resonance frequency having return loss of -23.38 dB and -29.65 dB respectively.

scholarly journals Design and simulation of UWB microstrip patch antenna for Ku/K bands applications

2019 ◽  
Vol 9 (6) ◽  
pp. 4845
Author(s):  
Mohammed El Jourmi ◽  
Hassan Ouahmane ◽  
Fouad Kharroubi
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Design System ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Large Bandwidth ◽  
Rectangular Microstrip Patch Antenna ◽  
Mobile Satellite

<span>In this paper, a compact Rectangular Microstrip Patch Antenna (RMPA) fed by microstrip line has been designed to operate for Ku/K bands applications. The proposed antenna is slotted and optimized to reach a large bandwidth and cover various applications such as 5G communication (in frequency range 24.25-27.5 GHz), fixed and mobile satellite, radionavigation, space research, radiolocation etc. In this design, the substrate used is FR4 with a relative permittivity of 4.4 and a thickness of 1.6 mm. The slotted RMPA has been simulated using Advanced Design System (ADS) software and the obtained results are presented and discussed. The proposed antenna achieves a return loss less than -10 dB and VSWR (voltage standing wave ratio) &lt; 2 in frequency range from 16.58 to 25.29 GHz. The percentage bandwidth provided by the proposed microstrip antenna is 41.61%.</span>

scholarly journals Band notched self complementaryultra wideband antenna for wireless applications

2018 ◽  
Vol 7 (2.8) ◽  
pp. 529 ◽  
Author(s):  
Ch Ramakrishna ◽  
G A.E.Satish Kumar ◽  
P Chandra Sekhar Reddy
Keyword(s):  
High Frequency ◽  
Return Loss ◽  
Wide Band ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Relative Dielectric Permittivity ◽  
Frequency Range ◽  
Ground Structure ◽  
Wireless Applications ◽  
Patch Edge

This paper presents a band notched WLAN self complementaryultra wide band antenna for wireless applications. The proposed antenna encounters a return loss (RL) less than -10dB for entire ultra wideband frequency range except band notched frequency. This paper proposes a hexagon shape patch, edge feeding, self complementary technique and defective ground structure. The antenna has an overall dimensionof 28.3mm × 40mm × 2mm, builton  substrate FR4 with a relative dielectric permittivity 4.4. And framework is simulated finite element method with help of high frequency structured simulator HFSSv17.2.the proposed antenna achieves a impedance bandwidth of 8.6GHz,  band rejected WLAN frequency range 5.6-6.5 GHz with  vswr is less than 2.

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

Sign in / Sign up

Export Citation Format

Share Document