scholarly journals Effects of the Feedline Position on Microstrip Patch Antenna Performance

2021 ◽  
Vol 06 (12) ◽  
Author(s):  
Ali Recai Celik ◽  
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Line Position ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Performance ◽  
Basic Characteristics

Abstract In this study, it is aimed to demonstrate the effects of the feed line position on the operating frequency, return loss and bandwidth of the rectangular patch microstrip antenna. For this purpose, a compact-sized antenna that can operate at 2.4-2.45 GHz frequencies is designed in High Frequency Structure Simulator (HFSS) program. Then, the position of the feedline is changed horizontally and vertically, and its effects are observed. The results obtained after the modificaions are given and discussed. It is stated that the feed line position is a very important parameter that affects the basic characteristics of the antenna.

scholarly journals Designing a Microstrip Patch Antenna in Part of Ultra-Wideband Applications

2020 ◽  
Vol 17 (4) ◽  
pp. 1216
Author(s):  
Wa'il A. Godaymi Al-Tumah ◽  
Raed Shaaban ◽  
Zeki Ahmed
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Frequency Range ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Rectangular Microstrip Antenna

In this work, a simulated study was carried out for designing a novel spiral rectangular patch of microstrip antenna that is used in ultra-wideband applications by using a high frequency structure simulator software (HFSS). A substrate with dielectric constant of 4.4 and height 2.10 mm (commercial substrate height available is about 0.8-1.575 mm) has been used for the design of the proposed antenna. The design basis for enhancing bandwidth in the frequency range 6.63 - 10.93 GHz is based on increasing the edge areas that positively affect the antenna's efficiency. This design makes the designed antenna cost less by reducing the area of the patch. It has been noticed that the bandwidth of the antenna under this study is increasing to 4.30 GHz or 61% compared with 3.6% for the standard rectangular microstrip antenna with the same dimensions of the proposed antenna. The antenna also maintains the voltage standing wave ratio of 1.09 at resonant frequency 7.07 GHz, return loss -27.07 dB, and the amount of impedance in real and imaginary parts 51.5Ω and 3.3Ω, respectively.

Study of the Feeding Techniques of Microstrip Antenna at 28 GHz for 5G Applications

2015 ◽  
Vol 781 ◽  
pp. 49-52 ◽  
Author(s):  
Noor Ainniesafina Zainal ◽  
Muhammad Ramlee Kamarudin ◽  
Nor Hidayu Shahadan ◽  
Jamal Nasir ◽  
Mohsen Khalily ◽  
...  
Keyword(s):  
Reflection Coefficient ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Frequency Structure ◽  
Feeding Techniques

This work presents a simulation of two different feeding techniques of microstrip patch antenna for 28GHz, 5G applications. The antenna fed by inset feed line and coplanar feed line. The simulated results using High Frequency Structure Simulator (HFSS) shows that both the reflection coefficient of less than-10dB have been achieved over a frequency of 28GHz; demonstrate a gain of 7.96dBi and 5.72dBi for the inset feed line and coplanar feed line, respectively.

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna

2013 ◽  
Vol 684 ◽  
pp. 303-306
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Impedance Matching ◽  
Feeding Method ◽  
High Frequency Structure Simulator ◽  
Feeding Methods ◽  
Coaxial Probe ◽  
Dimension Ratio

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

Design and Optimization of Rectangular Patch Antenna Based on FR4, Teflon and Ceramic Substrates

2019 ◽  
Vol 12 (4) ◽  
pp. 368-373
Author(s):  
Manickam Karthigai Pandian ◽  
Thangam Chinnadurai
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ceramic Substrates ◽  
Design And Optimization ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Low Profile ◽  
Low Profile Antennas ◽  
Communication Devices

Background: Modern communication devices are very much dependent on the operation of low profile antennas. The objective of this paper is to perform the design and simulation of a rectangular microstrip patch antenna at a resonant frequency of 9.5 GHz. Methods: Design of the antenna is given with various substrates like FR4, Teflon and Ceramic substrates at the desired frequency. For each substrate, the performance of the antenna is measured in terms of its return loss and Voltage Standing Wave Ratio (VSWR). Results: Ansoft High-Frequency Structure Simulator is used to simulate the antenna characteristics. Conclusion: Performance characteristics of the antenna with three different substrates are compared to identify the substrate that provides the accurate return loss and VSWR.

scholarly journals Simulation of Rectangular Microstrip Patch Antenna using ANSYS

2019 ◽  
Vol 8 (6) ◽  
pp. 5145-5149
Keyword(s):  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Satellite Communication ◽  
Microstrip Patch Antenna ◽  
Head Model ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Rectangular Microstrip Patch Antenna

This paper presents the design and simulation of a rectangular microstrip patch antenna with enhanced results. Antennas are playing the most important key role in wireless communication systems and especially microstrip patch antenna is the simplest and best form for mobile communication systems. Therefore, the design of antenna for mobile satellite communication and space to earth communication is described in this proposed work. The working of rectangular micro strip patch antenna is studied and the effect of height of the substrate on antenna performance is analyzed and the results are plotted. It has been noticed that the height of substrate should be neither small nor large. The effect of inserting a slot in the patch is also observed in this paper. Return Loss results are plotted for the designed structure and it is noticed that return loss is almost doubled by inserting a slot. Further two symmetrical slots are inserted in the patch and the respective results are plotted. Insertion of two slots gave multiple operating frequencies to the antenna with a compromise of s11. The simulation of proposed structures of antennas is done using ANSYS HFSS (high-frequency structure simulator) which is commercially used as a finite element method solver for electromagnetic structures. A sphere with human brain characteristics is created and average SAR (specific absorption ratio) is plotted on the head model. The proposed antenna has enhanced return loss of -52dB and VSWR of 1.005 at 2.24GHz. This work also introduces multiple operating frequencies using two slots of same size.

scholarly journals E SHAPE MICROSTRIP PATCH ANTENNA WITH RECTANGULAR AND CIRCULAR SLOT

2020 ◽  
Vol 5 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Priyanka Jain ◽  
Raghavendra Sharma ◽  
Vandana Vikas Thakre
Keyword(s):  
Loss Tangent ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Microstrip Patch ◽  
Rectangular Patch

In this proposed design a Rectangular E shaped micro-strip patch antenna is present with rectangular and circular slot within the Rectangular patch which operate at frequency 2.4 GHz. By proposed antenna design and coaxial feeding at suitable place  the resultant return loss, VSWR and bandwidth will be find out. For the propose microstrip antenna we have use FR-4 substrate which contain permittivity of 4.4 and thickness 1.5, loss tangent is 0.02. HFSS simulation software is used for designing and analysis.

scholarly journals Bandwidth and Efficiency Enhancement of Rectangular Patch Antenna for SHF Applications

2019 ◽  
Vol 9 (6) ◽  
pp. 4962-4967
Author(s):  
M. M. Nahas ◽  
M. Nahas
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Low Cost ◽  
Ground Plane ◽  
Cost Effective ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Performance

The microstrip patch antenna is used in various communication applications including cellular phones, satellites, missiles, and radars, due to its several attractive features such as small size and weight, low cost, and easy fabrication. The microstrip patch antenna consists of a top radiating patch, a bottom ground plane, and a dielectric substrate in between. The patch can have different shapes, the rectangular patch being the most commonly used. In practice, the microstrip antenna suffers from narrow bandwidth and low gain efficiency. This paper aims to enhance the bandwidth and efficiency of a rectangular-patch antenna using the High-Frequency Structure Simulator (HFSS). Initially different patch sizes and substrate materials are investigated and optimal antenna parameters are achieved. Then, the antenna performance is further enhanced by inserting single and double slot designs into the patch. Two cost-effective feeding methods are involved in the investigation. The antenna is designed to operate in the Super High Frequency (SHF) band.

scholarly journals Design of a Dual Band Rectangular Microstrip Antenna

2018 ◽  
Vol 3 (4) ◽  
pp. 438-443
Author(s):  
Ranjan Mishra ◽  
Raj Gaurav Mishra ◽  
R. K. Chaurasia
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Geometrical Parameters ◽  
Microstrip Patch ◽  
Ansoft Hfss ◽  
Rectangular Microstrip Antenna

The objective of the paper is to design and investigate a rectangular microstrip antenna that covers the band from 2.4 to 3.6 GHz. The proposition consolidates investigation of fundamentals of microstrip patch antenna. A progression of simulation in Ansoft HFSS (High Frequency System Simulation) has been carried out to discover the dual operating frequency. The qualities of the patch antenna rely on its different geometrical parameters. The investigation is carried in terms of two prime factors: Return loss and radiation pattern.

scholarly journals Microstrip Patch Antenna Array Design Anaylsis for 5G Communication Applications

2020 ◽  
Vol 6 (5) ◽  
pp. 1-5
Author(s):  
Rovin Tiwari ◽  
Raghavendra Sharma ◽  
Rahul Dubey
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Basic Element ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Array Design ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Considerable Range

A research on Antenna design and simulation is a emerging area among researchers. Antenna is a basic element for wireless communication. There are various shaps and types of antenna, which uses in different allpication. Now a days Microstrip patch anteena is very useful in advance electronics devices applications. This paper focused on study based various types of microstrip antenna. Return loss, VSWR, bandwidth, resonant frequency and gain is key parameters to judge antenna performance. Good value of return loss is less than -10dB. Considerable range of VSWR is 1-2. CST microwave studio is a advance software to design and simulation of all types of antenna, filter etc.

Sign in / Sign up

Export Citation Format

Share Document