Characterization of Sand Production for Clayey-Silt Sediments Conditioned to Openhole Gravel-Packing: Experimental Observations

SPE Journal ◽  
2021 ◽  
pp. 1-18
Author(s):  
Yurong Jin ◽  
Yanlong Li ◽  
Nengyou Wu ◽  
Daoyong Yang
Keyword(s):  
Large Scale ◽  
Early Stage ◽  
Tensile Failure ◽  
Inlet Pressure ◽  
Sand Production ◽  
Failure Patterns ◽  
Sand Control ◽  
Clayey Silt ◽  
Fracture Development ◽  
Gravel Packing

Summary As one of the geotechnical risks, sanding has been one of the main constraints for safely and sustainably developing marine natural gas hydrate. In this study, a cylindrical vessel that is packed with the clayey-silt sediment collected from the Shenhu area of the northern South China Sea is used to microscopically observe sand detachment, migration within matrix, invasion to gravel packing, and production for openhole gravel packing. More specifically, by injecting water from the vessel boundary, the seepage and stress-strain field for sediment near the wellbore after hydrate dissociation is simulated, and the sand failure characteristics [i.e., the produced sand volume and particle size distributions (PSDs)] are quantified. The sand failure pattern is found to largely differ from that of a sandstone reservoir, whereas fractures, wormholes, and fluidized channels are successively developed along with a large scale of sand production and inlet pressure variation. Followed is a steady flow state with a stable inlet pressure without noticeable sand failure. Correspondingly, the fracture is induced and propagated by the combinational effort of shear and tensile failure, whereas wormholes and fluidized channels are associated with the liquid dragging force. At the end of each test, foraminifera are found to accumulate near the external side of the gravel-packing region, which is beneficial to sand control. In the meantime, a compact mudcake, as an infiltration medium, is observed outside the gravel-packing layer. The 30/50 mesh gravel packing is able to control grain size up to 30.0 µm in diameter with a median of 5.0 µm, whereas the produced grains account for less than 1.0 vol% of the total sediment. By performing sensitivity analysis on sand production, depressurization shall be conducted at a small rate to not only control sand production, but also to induce flow paths at the early stage. Moreover, the sand production rate associated with fracture development is larger than those of wormholes and fluidized channels. This study focuses on the experimental observations on sand failure patterns, and the theoretical formulations and modeling will be presented and explained in a future work.3

scholarly journals A Solution to Sand Production from Natural Gas Hydrate Deposits with Radial Wells: Combined Gravel Packing and Sand Screen

2022 ◽  
Vol 10 (1) ◽  
pp. 71
Author(s):  
Yiqun Zhang ◽  
Wei Wang ◽  
Panpan Zhang ◽  
Gensheng Li ◽  
Shouceng Tian ◽  
...  
Keyword(s):  
Natural Gas ◽  
Gas Hydrate ◽  
Control Method ◽  
Gas Production ◽  
Sand Production ◽  
Natural Gas Hydrate ◽  
Vertical Well ◽  
Sand Control ◽  
Gravel Packing ◽  
Radial Well

Sand production is one of the main problems restricting the safe, efficient and sustainable exploitation of marine natural gas hydrate. To explore the sand-control effects of gravel packing, experiments that simulate hydrate extraction in the water-rich environment were conducted with designed hydrate synthesis and exploitation devices. Three sand control completion methods, including 120 mesh sand screen, 400 mesh sand screen, 120 mesh sand screen combined with gravel packing, are adopted. Sand and gas production rates were compared under different well types and sand control completion methods. Results show that the gas production modes of radial wells and vertical wells are almost the same at the same time due to the small experimental scale and high permeability. The sand production of the vertical well with gravel packing combined with a sand-control screen is 50% lower than that of the vertical well with sand-control screens only. Radial well with gravel packing combined with sand-control screens produced 87% less sand than screen mesh alone. The cumulative gas production and recovery rates of a radial well with the composite sand control method are better than those without gravel packing in the same development time.

The Role of Elasto-Plasticity in Cavity Shape and Sand Production in Oil and Gas Wells

SPE Journal ◽  
2018 ◽  
Vol 24 (02) ◽  
pp. 744-756 ◽  
Author(s):  
Haotian Wang ◽  
Mukul M. Sharma
Keyword(s):  
Shear Failure ◽  
Oil And Gas ◽  
Shear Bands ◽  
Failure Criteria ◽  
Tensile Failure ◽  
Production Model ◽  
Sand Production ◽  
Plastic Properties ◽  
Cavity Shape ◽  
Failure Patterns

Summary Previous experimental observations have shown the formation of distinct failure patterns and cavity shapes under different stress and flow conditions. With isotropic stress, spiral failure patterns with localized shear bands are likely to form. On the other hand, under anisotropic stress, V-shaped cavities, dog-ear cavities, or slit-mode cavities are usually observed. However, the mechanisms for the development of these sanding cavities have not been fully articulated. In addition, to accurately predict the onset of sanding and to predict the sand-production rate, it is crucial to capture the physics of the formation of these cavities during sand production. This paper presents a fully coupled poro-elasto-plastic, 3D sand-production model for sand-production prediction around openhole and perforated wellbores in a weakly consolidated formation. Sanding criteria are based on a combination of shear failure, tensile failure, and compressive failure from the Mohr-Coulomb theory and strain-hardening/softening. After the failure criteria are met, an algorithm for the entrainment of the sand based on the calculation of hydrodynamic forces is implemented to predict sand erosion and transport. Dynamic mesh refinement has been implemented to effectively capture the strain-localization regions. The model has been validated with multiple analytical solutions. In addition, it is applied to compare with previous sand-production experiments that have explored the different cavity shapes formed under different conditions. The model is capable of not only explaining the mechanisms responsible for each type of cavity shape but also predicting the cavity shape that will be formed under a specific set of conditions. Parametric studies for these cases provide an additional insight into the important role that the post-yield, poro-elasto-plastic properties of the sand play in controlling the sanding mechanisms and cavity development. This allows us to predict, much more accurately, the onset of sanding and the sanding rate.

scholarly journals Effect of Slot Width and Density on Slotted Liner Performance in SAGD Operations

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 268
Author(s):  
Yujia Guo ◽  
Alireza Nouri ◽  
Siavash Nejadi
Keyword(s):  
Large Scale ◽  
Control Method ◽  
Slot Width ◽  
Control Technique ◽  
Sand Production ◽  
Fines Migration ◽  
Pressure Drops ◽  
Sand Control ◽  
Mechanical Methods ◽  
Triaxial Cell

Sand production from a poorly consolidated reservoir could give rise to some severe problems during production. Holding the load bearing solids in place is the main goal of any sand control technique. The only sand control techniques that have found applications in steam assisted gravity drainage (SAGD) are some of the mechanical methods, including wire wrapped screens, slotted liners and more recently, punched screens. Slotted liner is one of the most effective mechanical sand control methods in the unconsolidated reservoir exploitation, which has proven to be the preferred sand control method in the SAGD operations. The main advantage of the slotted liners that makes them suitable for SAGD operations is their superior mechanical integrity for the completion of long horizontal wells. This study is an attempt to increase the existing understanding of the fines migration, sand production, and plugging tendency for slotted liners by using a novel large-scale scaled completion test (SCT) facility. A triaxial cell assembly was used to load sand-packs with specified and controlled grain size distribution, shape and mineralogy, on multi-slot sand control coupons. Different stress levels were applied parallel and perpendicular to different combinations of slot width and density in multi-slot coupons, while brine was injected from the top of the sand-pack towards the coupon. At each stress level, the mass of produced sand was measured, and the pressure drops along the sand-pack and coupon were recorded. Fines migration was also investigated by measuring fines/clay concentration along the sand-pack. The current study employed multi-slot coupons to investigate flow interactions among slots and its effect on the flow performance of liner under typically encountered stresses in SAGD wells. According to the experimental observations, increasing slot width generally reduces the possibility of pore plugging caused by fines migration. However, there is a limit for slot aperture beyond which the plugging is not reduced any further, and only a higher level of sanding occurs. Test measurements also indicated that besides the slot width, the slot density also influences the level of plugging and sand production and must be included in the design criteria.

ISCA: Quick Real-Time Sand Potential Prediction Simulator based on Critical Drawdown Failure and Machine Learning Model

2021 ◽  
Author(s):  
A. I. Biladi
Keyword(s):  
Machine Learning ◽  
Oil And Gas ◽  
High Efficiency ◽  
Early Stage ◽  
Gas Production ◽  
Control Analysis ◽  
Sand Production ◽  
Oil And Gas Production ◽  
Sand Control ◽  
Prediction Techniques

Sand production is almost an inevitable problem in oil and gas production facilities. As the reservoir depletes, sand grains from the reservoir begin to flow into the wellbore, this can cause serious problems to the wellbore. Excessive sand production can eventually plug and erode tubing, casing, flowlines, and surface equipment or even lead to formation collapse. In general, once sand production has occurred and if it is not handled properly it can end the production life of a reservoir and wells. This problem mostly occurs in mature fields with marginal economics for workover. The more reasonable option is to predict or mitigate the sand production, which can help identify the most economical way of sand control methods at the early stage. Many conventional sand prediction techniques have been developed which are based on field observation and experience, laboratory sand production experiments, and theoretical or numerical modeling. These conventional techniques have proven their effectiveness, but to achieve them can be time-consuming and costly. In this paper, we try to predict sand production with high efficiency and accuracy by using a quick simulator. Integrated Sand Control Analysis or ISCA is a simple simulator to help predict early sand production based on critical borehole and calculate critical drawdown pressure prediction. ISCA is supported by several mathematical models that function to predict various types of formation. Integrated with Machine Learning makes ISCA also compatible with big data analysis. The results in this study show that the combination of Machine Learning and analytical model can achieve accuracy above 90% based on the comparison of laboratory results with software predictions. With a high level of accuracy results this software can be considered as a reliable tool to predict and analyze sand production.

scholarly journals Experimental Study of Sand Production during Depressurization Exploitation in Hydrate Silty-Clay Sediments

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4268 ◽  
Author(s):  
Jingsheng Lu ◽  
Dongliang Li ◽  
Yong He ◽  
Lingli Shi ◽  
Deqing Liang ◽  
...  
Keyword(s):  
Large Scale ◽  
Silty Clay ◽  
Sand Production ◽  
Fracture Permeability ◽  
Vertical Wells ◽  
Mud Cake ◽  
Water Rates ◽  
Sand Control ◽  
Production Temperature ◽  
Clay Sediment

Silty-clay reservoirs are a weak point in sand production and sand control studies due to their low economy. However, China’s marine natural gas hydrates (NGH) mostly exist in silty-clay sediments, which restrict the sustainable and efficient development of NGH. In order to study the sand production of hydrate silty-clay sediments, hydrate production experiments in vertical wells and horizontal wells were carried out using a self-developed hydrate sand production and sand control simulation device. The results showed a great difference between the hydrate silty-clay sediments and hydrate sand sediments. The significant differences in production pressure and production temperature between the different layers indicated the low permeability and low heterogeneity of the hydrate silty-clay sediments. The sliding settlement of the overall depression in the horizontal well and overall subsidence in the vertical well of the hydrate silty-clay reservoir would easily lead to silty-clay flow and large-scale sand production. When water rates decreased, the property of “silty-clay sediment filtration and wall building” was found, which formed a “mud cake” around the wellbore. The good strength of adhesion and fracture permeability of the “mud cake” provided ideas for reservoir reformation. This study further discusses sand production and sediment reformation in hydrate silty-clay sediments.

Konkurrenz zwischen Stieleiche und Buche auf Lothar-Sturmflächen | Competition between pedunculate oak and European beech on Lothar windthrow areas

2009 ◽  
Vol 160 (5) ◽  
pp. 114-123 ◽  
Author(s):  
Daniel Otto ◽  
Sven Wagner ◽  
Peter Brang
Keyword(s):  
Large Scale ◽  
Early Stage ◽  
Tree Height ◽  
European Beech ◽  
Threshold Value ◽  
Test Methods ◽  
Permanent Plots ◽  
Pedunculate Oak ◽  
Competitive Pressure ◽  
Competition Index

The competitive pressure of naturally regenerated European beech (Fagus sylvatica) saplings on planted pedunculate oak (Quercus robur) was investigated on two 1.8 ha permanent plots near Habsburg and Murten (Switzerland). The plots were established with the aim to test methods of artificial oak regeneration after large-scale windthrow. On both plots, 80 oaks exposed to varying levels of competitive pressure from at most 10 neighbouring beech trees were selected. The height of each oak as well as stem and branch diameters were measured. The competitive pressure was assessed using Schütz's competition index, which is based on relative tree height, crown overlap and distance from competing neighbours. Oak trees growing without or with only slight competition from beech were equally tall, while oaks exposed to moderate to strong competition were smaller. A threshold value for the competition index was found above which oak height decreased strongly. The stem and branch diameters of the oaks started to decrease even if the competition from beech was slight, and decreased much further with more competition. The oak stems started to become more slender even with only slight competition from beech. On the moderately acid beech sites studied here, beech grow taller faster than oak. Thus where beech is competing with oak and the aim is to maintain the oak, competitive pressure on the oak must be reduced at an early stage. The degree of the intervention should, however, take the individual competitive interaction into account, with more intervention if the competition is strong.

scholarly journals Favorable Effects of GLP-1 Receptor Agonist against Pancreatic β-Cell Glucose Toxicity and the Development of Arteriosclerosis: “The Earlier, the Better” in Therapy with Incretin-Based Medicine

2021 ◽  
Vol 22 (15) ◽  
pp. 7917
Author(s):  
Hideaki Kaneto ◽  
Tomohiko Kimura ◽  
Masashi Shimoda ◽  
Atsushi Obata ◽  
Junpei Sanada ◽  
...  
Keyword(s):  
Large Scale ◽  
Cell Function ◽  
Apoptotic Cell ◽  
Early Stage ◽  
Insulin Biosynthesis ◽  
Protective Effects ◽  
Pancreatic Β Cell ◽  
Β Cells ◽  
Β Cell ◽  
Glucose Toxicity

Fundamental pancreatic β-cell function is to produce and secrete insulin in response to blood glucose levels. However, when β-cells are chronically exposed to hyperglycemia in type 2 diabetes mellitus (T2DM), insulin biosynthesis and secretion are decreased together with reduced expression of insulin transcription factors. Glucagon-like peptide-1 (GLP-1) plays a crucial role in pancreatic β-cells; GLP-1 binds to the GLP-1 receptor (GLP-1R) in the β-cell membrane and thereby enhances insulin secretion, suppresses apoptotic cell death and increase proliferation of β-cells. However, GLP-1R expression in β-cells is reduced under diabetic conditions and thus the GLP-1R activator (GLP-1RA) shows more favorable effects on β-cells at an early stage of T2DM compared to an advanced stage. On the other hand, it has been drawing much attention to the idea that GLP-1 signaling is important in arterial cells; GLP-1 increases nitric oxide, which leads to facilitation of vascular relaxation and suppression of arteriosclerosis. However, GLP-1R expression in arterial cells is also reduced under diabetic conditions and thus GLP-1RA shows more protective effects on arteriosclerosis at an early stage of T2DM. Furthermore, it has been reported recently that administration of GLP-1RA leads to the reduction of cardiovascular events in various large-scale clinical trials. Therefore, we think that it would be better to start GLP-1RA at an early stage of T2DM for the prevention of arteriosclerosis and protection of β-cells against glucose toxicity in routine medical care.

scholarly journals Understanding the Processes Causing the Early Intensification of Hurricane Dorian through an Ensemble of the Hurricane Analysis and Forecast System (HAFS)

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 93
Author(s):  
Andrew Hazelton ◽  
Ghassan J. Alaka ◽  
Levi Cowan ◽  
Michael Fischer ◽  
Sundararaman Gopalakrishnan
Keyword(s):  
Tropical Cyclone ◽  
Large Scale ◽  
Early Stage ◽  
Early Period ◽  
Storm Track ◽  
Key Factors ◽  
Complex Interplay ◽  
Forecast System ◽  
Model Initialization

The early stages of a tropical cyclone can be a challenge to forecast, as a storm consolidates and begins to grow based on the local and environmental conditions. A high-resolution ensemble of the Hurricane Analysis and Forecast System (HAFS) is used to study the early intensification of Hurricane Dorian, a catastrophic 2019 storm in which the early period proved challenging for forecasters. There was a clear connection in the ensemble between early storm track and intensity: stronger members moved more northeast initially, although this result did not have much impact on the long-term track. The ensemble results show several key factors determining the early evolution of Dorian. Large-scale divergence northeast of the tropical cyclone (TC) appeared to favor intensification, and this structure was present at model initialization. There was also greater moisture northeast of the TC for stronger members at initialization, favoring more intensification and downshear development of the circulation as these members evolved. This study highlights the complex interplay between synoptic and storm scale processes in the development and intensification of early-stage tropical cyclones.

scholarly journals Cytotoxic Profiling of Annotated and Diverse Chemical Libraries Using Quantitative High-Throughput Screening

2019 ◽  
Vol 25 (1) ◽  
pp. 9-20 ◽  
Author(s):  
Olivia W. Lee ◽  
Shelley Austin ◽  
Madison Gamma ◽  
Dorian M. Cheff ◽  
Tobie D. Lee ◽  
...  
Keyword(s):  
Cell Lines ◽  
Cancer Cell ◽  
High Throughput ◽  
High Throughput Screening ◽  
Drug Targets ◽  
Large Scale ◽  
Early Stage ◽  
Cancer Cell Line ◽  
Hek 293 ◽  
Cytotoxic Compounds

Cell-based phenotypic screening is a commonly used approach to discover biological pathways, novel drug targets, chemical probes, and high-quality hit-to-lead molecules. Many hits identified from high-throughput screening campaigns are ruled out through a series of follow-up potency, selectivity/specificity, and cytotoxicity assays. Prioritization of molecules with little or no cytotoxicity for downstream evaluation can influence the future direction of projects, so cytotoxicity profiling of screening libraries at an early stage is essential for increasing the likelihood of candidate success. In this study, we assessed the cell-based cytotoxicity of nearly 10,000 compounds in the National Institutes of Health, National Center for Advancing Translational Sciences annotated libraries and more than 100,000 compounds in a diversity library against four normal cell lines (HEK 293, NIH 3T3, CRL-7250, and HaCat) and one cancer cell line (KB 3-1, a HeLa subline). This large-scale library profiling was analyzed for overall screening outcomes, hit rates, pan-activity, and selectivity. For the annotated library, we also examined the primary targets and mechanistic pathways regularly associated with cell death. To our knowledge, this is the first study to use high-throughput screening to profile a large screening collection (>100,000 compounds) for cytotoxicity in both normal and cancer cell lines. The results generated here constitute a valuable resource for the scientific community and provide insight into the extent of cytotoxic compounds in screening libraries, allowing for the identification and avoidance of compounds with cytotoxicity during high-throughput screening campaigns.

Sign in / Sign up

Export Citation Format

Share Document