scholarly journals Design of Shrewd Underwater Routing Synergy using Porous Energy Shells

2020 ◽  
Author(s):  
Shahzad Ashraf ◽  
Tauqeer Ahmed ◽  
Asif Raza ◽  
Hamad Naeem
Keyword(s):  
Cost Effective ◽  
Research Direction ◽  
Residual Energy ◽  
Data Packet ◽  
Energy Utilization ◽  
Quality Inspection ◽  
Energy Status ◽  
Active Devices ◽  
Packet Delivery ◽  
Selection Of

Abstract Underwater sensors link establishment and quality inspection challenges are blurt out during ubiquitous data monitoring. The energy utilization has a direct impact because all active devices are battery dependents and no charging or replacement actions could be made when cost- effective data packet delivery has been set as a benchmark. The hop link inspection and the selection of a Shrewd link through resurrecting link factor was a nothing short of bleak challenge which could only be made possible after going through meticulous research by developing a shrewd underwater routing synergy using extra porous energy shells (SURS-PES) which might never have conducted of before. After broadcasting packets the sensor node conducts a link inspection phase thereby, if any link is found to be less than or equal to 50% shaky; the destination receiving node puts in own residual energy status and return back to the source node which in result adds some unusable energy porous shell to strengthen the link from 50 to 90% at most and send it only to the targeted node and an unaltered data packet delivery is anticipated. Performance evaluation has been carried out using NS2 simulator and obtained results have been compared with DBR and EEDBR to observe the distinguish outcomes thereon results in vouches for the statement that has been made earlier for this research direction.

scholarly journals Design of Shrewd Underwater Routing Synergy Using Porous Energy Shells

Smart Cities ◽  
2020 ◽  
Vol 3 (1) ◽  
pp. 74-92 ◽  
Author(s):  
Shahzad Ashraf ◽  
Tauqeer Ahmed ◽  
Asif Raza ◽  
Hamad Naeem
Keyword(s):  
Cost Effective ◽  
Residual Energy ◽  
Data Packet ◽  
Link Quality ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Energy Status ◽  
Active Devices ◽  
Packet Delivery ◽  
Communication Links

During the course of ubiquitous data monitoring in the underwater environment, achieving sustainable communication links among the sensor nodes with astute link quality seems an ordeal challenge. Energy utilization has a direct impact because all active devices are battery dependent and no charging or replacement actions can be made when cost- effective data packet delivery has been set as the benchmark. Hop link inspection and the selection of a Shrewd link through a resurrecting link factor have been nothing short of a bleak challenge, and only possible after meticulous research to develop a shrewd underwater routing synergy using extra porous energy shells (SURS-PES) which has never been conducted before. After broadcasting packets, the sensor node conducts a link inspection phase, thereby, if any link is found to be less than or equal to 50% shaky, the destination receiving node adds its residual energy status and returns it to the source node which adds some unusable energy porous shell to strengthen the link from 5% to a maximum of 90% and sends it only to the targeted node, therefore, an unaltered data packet delivery is anticipated. Performance evaluation was carried out using an NS2 simulator and the obtained results were compared with depth-based routing (DBR) and energy efficient DBR (EEDBR) to observe the outcomes with results that confirmed the previously mentioned direction for research in this area.

Medical Literature Searches -How Many Bibliographic Databases are Needed for Sufficient Retrieval in Medical Topics?

1985 ◽  
Vol 24 (03) ◽  
pp. 163-165 ◽  
Author(s):  
K. John
Keyword(s):  
Medical Literature ◽  
Cost Effective ◽  
Medical Faculty ◽  
Bibliographic Databases ◽  
Literature Searches ◽  
Selection Of

SummaryAs many bibliographic services in medicine are offered, literature searches in eight databases at DIMDI were performed to find out which database is most important in medicine. The distribution of publications from members of the medical faculty of Frankfurt University was examined. No save prediction is possible as to which database will yield most articles. Overlapping from different databases is often rather low. The selection of an appropriate database mix for sufficient recall and in a cost-effective manner.is a task for an experienced searcher.

Distributed Entropy Energy-Efficient Clustering algorithm for cluster head selection (DEEEC)

2020 ◽  
Vol 39 (6) ◽  
pp. 8139-8147
Author(s):  
Ranganathan Arun ◽  
Rangaswamy Balamurugan
Keyword(s):  
Energy Efficient ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Residual Energy ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Second Stage ◽  
Energy Efficient Clustering ◽  
Two Stages ◽  
Ch Selection

In Wireless Sensor Networks (WSN) the energy of Sensor nodes is not certainly sufficient. In order to optimize the endurance of WSN, it is essential to minimize the utilization of energy. Head of group or Cluster Head (CH) is an eminent method to develop the endurance of WSN that aggregates the WSN with higher energy. CH for intra-cluster and inter-cluster communication becomes dependent. For complete, in WSN, the Energy level of CH extends its life of cluster. While evolving cluster algorithms, the complicated job is to identify the energy utilization amount of heterogeneous WSNs. Based on Chaotic Firefly Algorithm CH (CFACH) selection, the formulated work is named “Novel Distributed Entropy Energy-Efficient Clustering Algorithm”, in short, DEEEC for HWSNs. The formulated DEEEC Algorithm, which is a CH, has two main stages. In the first stage, the identification of temporary CHs along with its entropy value is found using the correlative measure of residual and original energy. Along with this, in the clustering algorithm, the rotating epoch and its entropy value must be predicted automatically by its sensor nodes. In the second stage, if any member in the cluster having larger residual energy, shall modify the temporary CHs in the direction of the deciding set. The target of the nodes with large energy has the probability to be CHs which is determined by the above two stages meant for CH selection. The MATLAB is required to simulate the DEEEC Algorithm. The simulated results of the formulated DEEEC Algorithm produce good results with respect to the energy and increased lifetime when it is correlated with the current traditional clustering protocols being used in the Heterogeneous WSNs.

Teknologi Esktrasi dan Cara Pemisahannya untuk Mendapatkan Kembali Karotenoid dari Minyak Sawit : Suatu Tinjauan

2016 ◽  
Vol 9 (1) ◽  
pp. 80-95
Author(s):  
Agus Sudibyo ◽  
Sardjono Sardjono
Keyword(s):  
Vitamin A ◽  
Palm Oil ◽  
Beta Carotene ◽  
Cost Effective ◽  
Raw Material ◽  
Extraction And Separation ◽  
Molecular Product ◽  
Industrial Use ◽  
Palm Oil Mill ◽  
Selection Of

Crude palm oil (CPO)is the richest natural plant source of carotenoids in terms of retinol (pro-vitamin A) equivalent, whereas palm oil mill effluent (POME) is generated from palm oil industry that contains oil and carotenes that used to be treated before discharge. Carotenoids are importance in animals and humans for the purpose of the enhancement of immune response, conversion of vitamin A and scavenging of oxygen radicals. This component has different nutritional  functions and benefits to humaan health. The growing interest in the other natural sources of beta-carotene and growing awareness to prevent pollution has stimulated the industrial use of CPO and POME as a raw material for carotenoids extraction. Various technologies of extraction and separation have been developed in order to recover of carotenoids.This article reports on various technologies that have been developed in order to recover of carotenoids from being destroyed in commercial refining of palm oil and effects of some various treatments on the extraction end separation for carotenoid from palm oil and carotenoids concentration. Principally, there are different technologies, and there is one some future which is the use of solvent. Solvent plays important role  in the most technologiest, however the problem of solvents which are used is that they posses potentiaal fire health and environmental hazards. Hence selection of the  most safe, environmentally friendly and cost effective solvent is important to design of alternative extraction methods.Chemical molecular product design is one of the methods that are becoming more popular nowadays for finding solvent with the desired properties prior to experimental testing.ABSTRAKMinyak sawit kasar merupakan sumber karotenoid terkaya yang berasal dari tanaman sawit sebagai senyawa yang sama dengan retinol atau pro-vitamin A; sedangkan limbah pengolahan minyak sawit dihasilkan dari industri pengolahan minyak sawit yang berisi minyak dan karotene yang perlu diberi perlakuan terlebih dahulu sebelum dibuang. Karotenoid merupakan bahan penting yang diperlukan pada hewan dan manusia guna memperkuat tanggapan terhadap kekebalan, konversi ke vitamin A dan penangkapan gugus oksigen radikal. Dengan berkembangnya ketertarikan dalam mencari beta-karotene yang bersumber dari alam lain dan meningkatnya kesadaran untuk mencegah adanya pencemaran lingkungan, maka mendorong suatu industri untuk menggunakan CPO dan POME sebagai bahan baku untuk diekstrak karotenoidnya. Berbagai macam teknologi guna mengekstrak dan memisahkan karotenoid telah dikembangkan untuk mendapatkan kembali karotenoidnya. Makalah ini melaporkan dan membahas berbagai jenis teknologi yang telah dikembangkan guna mendapatkan kembali senyawa karotenoid dari kerusakan di dalam proses pemurnian minyak sawit secara komersial dan pengaruh beberapa perlakuan terhadap ekstrasi dan pemisahan karotenoid dari minyak sawit dan konsentrasi karotenoidnya. Pada prinsipnya, berbagai teknologi yang digunakan untuk mengekstrak dan memisahkan karotenoid terdapat perbedaan, dan terdapat salah satu teknologi yang digunakan untuk esktrasi dan pemisahan karotenoid adalah menggunakan bahan pelarut. Pelarut yang digunakan mempunyai peranan yang penting dalam teknologi ekstrasi; namun pelarut yang digunakan untuk mengekstrak tersebut mempunyai persoalan karena berpotensi mengganggu kesehatan dan membahayakan cemaran lingkungan. Oleh karena itu, pemilihan jenis teknologi yang aman, ramah terhadap lingkungan dan biaya yang efektif untuk penggunaan pelarut merupakan hal penting sebelum dilakukan desain metode/teknologi alternatif untuk esktrasi karotenoid. Pola produk molekuler kimia merupakan salah satu metode yang saat ini menjadi lebih populer untuk mencari pelarut dengan sifat-sifat yang dikehendaki sebelum diujicobakan. Kata kunci :    karotenoid, ekstrasi, pemisahan, teknologi, minyak sawit kasar, limbah industri pengolahan sawit.

scholarly journals Design Considerations and Selection of Cost-Effective Switched Reluctance Drive for Radiator Cooling Fans

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 917
Author(s):  
Ickjin Son ◽  
Grace Firsta Lukman ◽  
Mazahir Hussain Shah ◽  
Kwang-Il Jeong ◽  
Jin-Woo Ahn
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Magnetic Characteristics ◽  
Switched Reluctance Motors ◽  
Switched Reluctance ◽  
Design Considerations ◽  
Cooling Fan ◽  
Cooling Fans ◽  
Power Switches ◽  
Selection Of

Switched reluctance motors (SRMs) are simple in structure, easy to manufacture, magnet-less, brushless, and highly robust compared to other AC motors which makes them a good option for applications that operate in harsh environment. However, the motor has non-linear magnetic characteristics, and it comes with various pole-phase combinations and circuit topologies that causes many difficulties in deciding on which type to choose. In this paper, the viability of SRM as a low-cost, rugged machine for vehicle radiator cooling fan is considered. First, necessary design considerations are presented, then three commonly use types of SRM are analyzed: A 3-phase 6/4, 3-phase 12/8, and a 4-phase 8/6 to find their static and dynamic characteristics so the most suitable type can be selected. Simulation results show that the 8/6 SRM produces the highest efficiency with less phase current which reduces the converter burden. However, with asymmetric half bridge converter, eight power switches are required for 8/6 SRM and thus put a burden on the overall drive cost. As a solution, the Miller converter with only six switches for four phase SRM. To verify the proposed idea, the 8/6 SRM was manufactured and tested. The results show that Miller converter can be used for the proposed SRM with slightly reduced efficiency at 80.4%.

Selecting Sanitation Solutions for Peri-urban Areas: A Case Study of Can Tho, Vietnam

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
Naomi Carrard ◽  
Juliet Willetts ◽  
Cynthia Mitchell ◽  
Mick Paddon ◽  
Monique Retamal
Keyword(s):  
Urban Areas ◽  
Cost Effective ◽  
Asset Replacement ◽  
Fit For Purpose ◽  
Infrastructure Investments ◽  
Sanitation Systems ◽  
Can Tho City ◽  
Sustainable Futures ◽  
Sanitation Infrastructure ◽  
Selection Of

In peri-urban areas where infrastructure investments have not yet been made, there is a need to determine the most context-appropriate, fit for purpose and sustainable sanitation solutions. Decision makers must identify the optimal system scale (on the spectrum from centralized to community to cluster scale) and assess the long-term costs and socio-economic/environmental impacts associated with different options. Addressing both cost-effectiveness and sustainability are essential to ensure that institutions and communities are able to continue to bear the costs and management burden of infrastructure operation, maintenance and asset replacement. This paper describes an approach to sanitation planning currently being undertaken as a research study in Can Tho City in southern Vietnam, by the Institute for Sustainable Futures and Can Tho University in collaboration with Can Tho Water Supply and Sewerage Company. The aim of the study is to facilitate selection of the most context-appropriate, fit for purpose, cost effective and sustainable sanitation infrastructure solution. As such, the study compares a range of sanitation alternatives including centralized, decentralized (at household or cluster scale) and resource recovery options. This paper provides an overview of the study and considers aspects of the Can Tho and Vietnamese regulatory, development and institutional context that present drivers and challenges for comparison of options and selection of fit for purpose sanitation systems.

Quantitative Selection of Variation Reduction Plans

1998 ◽  
Author(s):  
Anna C. Thornton
Keyword(s):  
Risk Mitigation ◽  
Cost Effective ◽  
Variation Reduction ◽  
Multiple Quality Characteristics ◽  
Cost Effective Approach ◽  
Manufacturing Performance ◽  
The Impact ◽  
Manufacturing Variation ◽  
Selection Of

Abstract Quality has been a rallying call in the design and manufacturing world for the last two decades. One way to improve quality is to reduce the impact of manufacturing variation. Variation risk mitigation is challenging especially when a product has multiple quality characteristics and complex production and assembly. It is common wisdom that companies should identify and mitigate the risk associated with variation throughout the design process. As yield problems are identified, they should be mitigated using the most cost effective approach. One approach to variation risk mitigation is variation reduction (VR). VR targets reduction of variation introduced by existing manufacturing processes using tools such as Design of Experiments (DOE) and robust design. Many companies have specialized groups that specialize in these methods. VR teams have the role of improving manufacturing performance; however, these teams are limited in their resources. In addition, no tools exist to quantitatively determine where a VR team’s efforts are most effectively deployed. This paper provides a mathematical and optimization model to best allocate VR resources in a complex product.

An Efficient and Stable Routing Algorithm in Mobile Ad Hoc Network

2021 ◽  
Vol 13 (04) ◽  
pp. 21-37
Author(s):  
Priyanka Pandey ◽  
Raghuraj Singh
Keyword(s):  
Ad Hoc Network ◽  
Ad Hoc ◽  
Mobile Ad Hoc Network ◽  
Residual Energy ◽  
Packet Delivery ◽  
Control Message ◽  
Mobile Ad Hoc ◽  
And Control ◽  
Route Request ◽  
Message Overhead

Mobile Ad hoc Network (MANET) is mainly designed to set up communication among devices in infrastructure-less wireless communication network. Routing in this kind of communication network is highly affected by its restricted characteristics such as frequent topological changes and limited battery power. Several research works have been carried out to improve routing performance in MANET. However, the overall performance enhancement in terms of packet delivery, delay and control message overhead is still not come into the wrapping up. In order to overcome the addressed issues, an Efficient and Stable-AODV (EFST-AODV) routing scheme has been proposed which is an improvement over AODV to establish a better quality route between source and destination. In this method, we have modified the route request and route reply phase. During the route request phase, cost metric of a route is calculated on the basis of parameters such as residual energy, delay and distance. In a route reply phase, average residual energy and average delay of overall path is calculated and the data forwarding decision is taken at the source node accordingly. Simulation outcomes reveal that the proposed approach gives better results in terms of packet delivery ratio, delay, throughput, normalized routing load and control message overhead as compared to AODV.

Sign in / Sign up

Export Citation Format

Share Document