scholarly journals (3-Aminopropyl) Triethoxysilane (APTES) Functionalized Magnetic Nanosilica Graphene Oxide (MGO) Nanocomposite for the Comparative Adsorption of the Heavy Metal (Pb(II), Cd(II) and Ni(II)) ions from Aqueous Solution

2021 ◽  
Author(s):  
C Donga ◽  
S Mishra ◽  
A Aziz ◽  
L Ndlovu ◽  
A Kuvarega ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Solution Ph ◽  
Magnetic Graphene Oxide ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Equilibrium Data

Abstract (3-aminopropyl) triethoxysilane (APTES) modified magnetic graphene oxide was synthesized and applied in the adsorption of three heavy metals, Pb(II), Cd(II) and Ni(II) from aqueous solution. An approach to prepare magnetic GO was adopted by using (3-aminopropyl) triethoxysilane (APTES) as a functionalizing agent on magnetic nanosilica coupled with GO to form the Fe3O4@SiO2-NH2/GO nanocomposite. FT-IR, XRD, BET, UV, VSM, SAXS, SEM and TEM were used to characterize the synthesized nanoadsorbents. Batch adsorption studies were conducted to investigate the effect of solution pH, initial metal ion concentration, adsorbent dosage and contact time. The maximum equilibrium time was found to be 30 min for Pb(II), Cd(II) and 60 min for Ni(II). The kinetics studies showed that the adsorption of Pb(II), Cd(II) and Ni(II) onto Fe3O4@SiO2-NH2/GO followed the pseudo-second-order kinetics. All the adsorption equilibrium data were well fitted to Langmuir isotherm model and maximum monolayer adsorption capacity for Pb(II), Cd(II) and Ni(II) were 13.46, 18.58 and 13.52 mgg-1, respectively. The Fe3O4@SiO2-NH2/GO adsorbents were reused for at least 7 cycles without the leaching of mineral core, showing the enhanced stability and potential application of Fe3O4@SiO2-NH2/GO adsorbents in water/wastewater treatment.

scholarly journals Thermodynamic Study on the Adsorption of Pb2+and Zn2+From Aqueous Solution by Human Hair

2010 ◽  
Vol 7 (4) ◽  
pp. 1296-1303 ◽  
Author(s):  
A. S. Ekop ◽  
N. O. Eddy
Keyword(s):  
Aqueous Solution ◽  
Human Hair ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Optimum Conditions ◽  
Batch System ◽  
Freundlich Adsorption Isotherm ◽  
Equilibrium Data ◽  
Adsorption Equilibrium Data

Adsorption of Pb(II) and Zn(II) ions from aqueous solutions was studied in a batch system using modified human hair. The optimum conditions for the adsorption of Pb(II) and Zn(II) ions from aqueous solution by human hair were investigated by considering the extent of adsorption with respect to contact time, initial metal ion concentration and temperature. The results obtained indicates that the extent of metal ions removed decreases with increasing contact time but increased with increase in the initial metal ion concentration. The adsorption equilibrium data best fitted Freundlich adsorption isotherm. The adsorption of Pb(II) and Zn(II) ions onto human hair is endothermic, spontaneous and is characterised by increasing degree of orderliness.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Adsorption of Nickel and Chromium Ions by Amine-Functionalized Silica Aerogel

2018 ◽  
Vol 156 ◽  
pp. 03014
Author(s):  
Sudarat Sertsing ◽  
Thanaphat Chukeaw ◽  
Sitthiphong Pengpanich ◽  
Bawornpong Pornchuti
Keyword(s):  
Silica Aerogel ◽  
Solution Concentration ◽  
Functionalized Silica ◽  
Solution Ph ◽  
Chromium Ions ◽  
Amine Functionalized ◽  
Adsorption Capacities ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Equilibrium Data

In this study, silica aerogel was synthesized by drying at atmospheric pressure and modified further with aminopropyl triethoxysilane (APTES). The amine-functionalized silica aerogel was investigated as an adsorbent for removal of nickel and chromium ions. The effect of contact time, solution pH, and initial solution concentration were studied. The equilibrium was achieved within 60 min. The optimum pH was found to be 4. Adsorption equilibrium data were agreed fairly well with Langmuir isotherm model. Adsorption capacities for nickel and chromium ions were found to be 40.32 mg/g and 46.08 mg/g, respectively.

scholarly journals Removal of phenol from aqueous solution by adsorption onto seashells: equilibrium, kinetic and thermodynamic studies

2013 ◽  
Vol 3 (2) ◽  
pp. 119-127 ◽  
Author(s):  
Papita Das Saha ◽  
Jaya Srivastava ◽  
Shamik Chowdhury
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Phenol Concentration ◽  
Phenol Removal ◽  
Solution Ph ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Initial Phenol Concentration ◽  
Adsorption Equilibrium Data ◽  
Adsorbent Dose

The efficacy of seashells as a new adsorbent for removal of phenol from aqueous solutions was studied by performing batch equilibrium tests under different operating parameters such as solution pH, adsorbent dose, initial phenol concentration, and temperature. The phenol removal efficiency remained unaffected when the initial pH of the phenol solution was in the range of 3–8. The amount of phenol adsorbed increased with increasing initial phenol concentration while it decreased with increasing temperature. The adsorption equilibrium data showed excellent fit to the Langmuir isotherm model with maximum monolayer adsorption capacity of 175.27 mg g−1 at pH 4.0, initial phenol concentration = 50 mg L−1, adsorbent dose = 2 g and temperature = 293 K. Analysis of kinetic data showed that the adsorption process followed pseudo-second-order kinetics. Activation energy of the adsorption process, calculated using the Arrhenius equation, was found to be 51.38 kJ mol−1, suggesting that adsorption of phenol onto seashells involved chemical ion-exchange. The numerical value of the thermodynamic parameters (ΔG0, ΔH0 and ΔS0) indicated that adsorption of phenol onto seashells was feasible, spontaneous and endothermic under the examined conditions. The study shows that seashells can be used as an economic adsorbent for removal of phenol from aqueous solution.

scholarly journals SYNTHESIS AND APPLICATION OF CHITOSAN/GRAPHENE OXIDE/MAGNETITE NANOSTRUCTURED COMPOSITE FOR Fe(III) REMOVAL FROM AQUEOUS SOLUTION

2018 ◽  
Vol 56 (2) ◽  
pp. 158
Author(s):  
Truong Dang Le ◽  
Hoang Vinh Tran ◽  
Le Dieu Thu ◽  
Tran Ngoc Quang ◽  
Nguyen Thi Minh Hang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Adsorption Equilibrium ◽  
Efficient Removal ◽  
Nanostructured Composite ◽  
Equilibrium Data ◽  
Adsorption Equilibrium Data ◽  
Efficient Adsorbent

In this research, the potential of chitosan/Fe3O4/graphene oxide (CS/Fe3O4/GO) nanocomposite for efficient removal of Fe(III) a cationic metal ion from aqueous solutions was investigated. The synthesized CS/Fe3O4/GO was characterized by XRD, VSM and SEM techniques. Also, the various parameters affecting Fe3+ removal were investigated. Fe(III) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum monolayer capacity (qmax), was calculated from the Langmuir as 6.5 mg.g-1. The results show that, CS/Fe3O4/GO nanocomposite, can be used as a cheap and efficient adsorbent for removal of heavy metal ions from aqueous solutions.

scholarly journals Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 962
Author(s):  
Kuo-Yu Chen ◽  
Wei-Yu Zeng
Keyword(s):  
Adsorption Capacity ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Gravimetric Analysis ◽  
Solution Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Initial Adsorption ◽  
Adsorption Equilibrium Data

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

scholarly journals Removal of Cd (II) ions from Aqueous Solution by Adsorption on Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2016 ◽  
Vol 11 (1) ◽  
pp. 140-150 ◽  
Author(s):  
Rajeshwar Man Shrestha
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Metal Ion ◽  
Activated Carbons ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Metal Ion Removal ◽  
Ion Removal ◽  
Equilibrium Data ◽  
Methylene Blue Number

Batch adsorption experiments were conducted for the adsorption of Cd (II) ions from aqueous solution by activated carbon prepared from Lapsi seed stone. The activated carbon was characterized by Iodine number, Methylene blue number, SEM and FTIR. Adsorption experiments were carried out to describe the effect of pH ,contact time and  adsorbent dose on the metal ion removal process .The results showed that the adsorption of Cd (II) ions was very fast initially and the equilibrium time was 3 hrs.The pH of 6.0 was an optimal pH for adsorption  of Cd(II) ions. Langmuir and Freundlich adsorption isotherms were used to explain the equilibrium data. Langmuir model best described the data with higher value of coeffcient of determination as −1 compared to that of Freundlich isotherm showing a maximum uptake of 37.0 mgg . This study demonstrated that the activated carbons prepared from Lapsi seed stone could be used for the removal of Cd (II) ions in water treatment. Journal of the Institute of Engineering, 2015, 11(1): 140-150

scholarly journals Isothermal, kinetics and thermodynamics studies of the biosorption of Pb(II) ion from aqueous solution using the scale of croaker fish (Genyonemus lineatus)

2013 ◽  
Vol 3 (3) ◽  
pp. 239-248
Author(s):  
Mojisola O. Nkiko ◽  
Abideen I. Adeogun ◽  
N. A. Adesola Babarinde ◽  
Oluwabunmi J. Sharaibi
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Sorption Process ◽  
Ion Concentration ◽  
Isothermal Kinetics ◽  
Fish Scale ◽  
Biosorption Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Biomass Dosage

Biosorbent prepared from the scale of croaker fish (Genyonemus lineatus) has been used for the removal of Pb(II) ion from aqueous solution in a batch system. The effects of some important parameters such as pH, initial metal concentration, temperature and biosorbent dosage on biosorption capacity were investigated. Equilibrium time for the biosorption process is 20 and 30 min at lower and higher concentrations, respectively. The process at 28 °C is in agreement with a pseudo-second-order kinetics model. The equilibrium data obeyed the Langmuir adsorption isotherm with a maximum monolayer adsorption capacity of 14.58 mg g−1. The study showed that the sorption process depends on biomass dosage, temperature, pH and initial metal ion concentration. The calculated thermodynamics parameters (ΔGo, ΔHo and ΔSo) indicated that the biosorption of the metal ion onto fish scale is feasible, spontaneous and exothermic in nature.

Improved Study on the Performance of Polyacrylamide/Attapulgite Clay Composite Material Removing Copper (II) Ions from Aqueous Solution

2014 ◽  
Vol 609-610 ◽  
pp. 26-31
Author(s):  
Chun Lei Li ◽  
Hui Xu ◽  
Jun Long Zhang ◽  
Wei Wang ◽  
Jing Tang ◽  
...  
Keyword(s):  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Freundlich Isotherms ◽  
Thermodynamics And Kinetics ◽  
Equilibrium Data ◽  
Ft Ir ◽  
Adsorption Desorption ◽  
Ft Ir Spectroscopy

A removal of Cu (II) ions from aqueous solutions onto PAM/ATP has been investigated using batch adsorption technique, including the effect of pH, contact time, initial metal ion concentration, adsorption thermodynamics and kinetics. PAM/ATP was characterized with Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The equilibrium data were analyzed using Langmuir and Freundlich isotherms and the best interpretation was given by Langmuir. The maximum adsorption capacity was found to be 212 mg/g after 60 min when pH =3. Regeneration experiments showed that the investigated PAM/ATP could be reused without significant adsorption losses even after five adsorption-desorption cycles.

scholarly journals Studying Ni(II) Adsorption of Magnetite/Graphene Oxide/Chitosan Nanocomposite

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Luyen T. Tran ◽  
Hoang V. Tran ◽  
Thu D. Le ◽  
Giang L. Bach ◽  
Lam D. Tran
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Entropy Change ◽  
Enthalpy Change ◽  
Nickel Ion ◽  
Adsorbent Dosage ◽  
Equilibrium Data ◽  
Adsorption Equilibrium Data

In this paper, Fe3O4/graphene oxide/chitosan (FGC) nanocomposite was synthesized using coprecipitation method for application to removal of nickel ion (Ni(II)) from aqueous solution by adsorption process. To determine residue Ni(II) ions concentration in aqueous solution after adsorption process, we have used UV-Vis spectrophotometric method, which is an effective and exact method for Ni(II) monitoring at low level by using dimethylglyoxime (DMG) as a complex reagent with Ni(II), which has a specific adsorption peak at the wavelength of 550 nm on UV-Vis spectra. A number of factors that influence Ni(II) ions adsorption capacity of FGC nanocomposite such as contact time, adsorption temperature, and adsorbent dosage were investigated. Results showed that the adsorption equilibrium is established after 70 minutes with the adsorbent dosage of 0.01 g.mL−1 at 30°C (the room temperature). The thermodynamic and kinetic parameters of this adsorption including free enthalpy change (∆G0), enthalpy change (∆H0), entropy change (∆S0), and reaction order with respect to Ni(II) ions were also determined. The Ni(II) ions adsorption equilibrium data are fitted well to the Langmuir isotherm and the maximum monolayer capacity (qmax) is 12.24 mg.g−1. Moreover, the FGC adsorbent can be recovered by an external magnet; in addition, it can be regenerated. The reusability of FGC was tested and results showed that 83.08% of removal efficiency was obtained after 3 cycles. The synthesized FGC nanocomposite with many advantages is a promising material for removal of heavy metal ions from aqueous solution to clean up the environment.

Sign in / Sign up

Export Citation Format

Share Document