scholarly journals Life Cycle Assessment of Methyl Bromide Production and Utilization: Cradle to Grave Analysis

2021 ◽  
Author(s):  
Sampatrao Manjare ◽  
Amit Shanbag
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Methyl Bromide ◽  
Substantial Effect ◽  
Environmental Damage ◽  
Methanol Production ◽  
Health Related ◽  
Cradle To Gate ◽  
Ozone Depleting Substances ◽  
The Impact

Abstract Methyl bromide is an effective and useful insecticide. It has ability to enter rapidly into materials at room temperature & pressure. Nowadays, it is primarily used for container fumigation purposes. However, exposure to it causes serious health-related issues. It is also one of the ozone-depleting substances. In this work, “cradle to gate” and “cradle to grave” approaches are considered to carry out a life cycle assessment of methyl bromide production. SimaPro software with the IMPACT 2002+ method is used to compute the results. From the results of cradle to gate approach, it is inferred that major emissions are due to usage of plant utilities and methanol production process which have a substantial effect on the atmosphere. From the results of cradle to grave approach, it is noted that application of methyl bromide causes significant environmental damage particularly to ozone layer followed by non-carcinogen.

scholarly journals Environmental impact of tofu production in West Jakarta using a life cycle assessment approach

2021 ◽  
Vol 896 (1) ◽  
pp. 012050
Author(s):  
I P Sari ◽  
W Kuniawan ◽  
F L Sia
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Ozone Depletion ◽  
Impact Analysis ◽  
Whole Process ◽  
Assessment Approach ◽  
Cradle To Gate ◽  
The Impact

Abstract Tofu is one of the processed soybean foods that are very popular with Indonesian society. Despite the popularity of Tofu, Tofu production in Indonesia is generally small and medium, reaching 500 kg per day, as in the tofu factory in Semanan, West Jakarta. The purpose of this study is to analyze the environmental impact of tofu production in West Jakarta. The life cycle assessment (LCA) approach was used to achieve this goal with SimaPro software for impact calculations. This research applies the LCA cradle to gate, which consists of soybean cultivation, transportation, and tofu production processes. The environmental impacts of tofu production analyzed in this study include global warming, ozone depletion, acidification, and eutrophication. The impact analysis showed that the acquisition of soybeans, which consisted of soybean cultivation and transportation, had the most significant environmental impact with a global warming potential value of 0.882 kg CO2 eq out of a total of 0.978 CO2 eq for the whole process.

scholarly journals A Comparative Life Cycle Assessment of Different Production Processes for Waterborne Polyurethane Dispersions

2021 ◽  
Author(s):  
Valentin Klug ◽  
Josef-Peter Schöggl ◽  
Doris Dallinger ◽  
Clemens Stueckler ◽  
Andreas Steiner ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Impact Category ◽  
Waterborne Polyurethane ◽  
Flow Process ◽  
Production Processes ◽  
Cradle To Gate ◽  
Polyurethane Dispersions ◽  
The Impact ◽  
Comparative Life Cycle Assessment

This study provides a comparative life cycle assessment (LCA) of four different polyurethane dispersion production processes from cradle-to-gate. The environmental performances of the NMP process, the acetone process, the melt process, and a conceptualized continuous flow process were evaluated and compared following the CML 2001 methodology. The LCA revealed that the conceptualized flow process exhibits the lowest environmental impact in all investigated impact categories. Depending on the impact category, the melt process or the acetone process rank second. The NMP process was observed to have the highest impact in all categories. Consequently, the flow process has the lowest carbon footprint (1.13 kg CO2-eq), according to the global warming potential (100 years), followed by the melt (1.45 kg CO2-eq), the acetone (1.95 kg CO2-eq) and the NMP process (3.11 kg CO2-eq).

scholarly journals Life Cycle Assessment of Environmental Impact of Steelmaking Process

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Huimin Liu ◽  
Qiqiang Li ◽  
Guanguan Li ◽  
Ran Ding
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Human Health ◽  
Molten Iron ◽  
Utilization Efficiency ◽  
Environmental Damage ◽  
High Resource ◽  
The Impact

The steel industry is facing problems such as serious environmental pollution and high resource consumption. At the same time, it lacks effective methods to quantify potential environmental impacts. The purpose of this work is to conduct a specific environmental analysis of steelmaking production in steel plants. The ultimate goal is to discover the main pollution of steelmaking and identify potential options for improving the environment. This paper uses life cycle assessment method to carry out inventory and quantitative analysis on the environmental impact of steelmaking system. Through analysis, the hazards are divided into four major categories, which are human health, climate change, ecosystem quality, and resources. The results show that molten iron has the greatest impact on human health, followed by the greatest impact on resources. The impact of scrap steel on human health ranks third. Molten iron is a key process that affects human health, climate change, ecosystems quality, and resources. In addition, processes such as fuels, working fluids, and auxiliary materials also cause certain environmental damage, accounting for a relatively small proportion. Optimizing the utilization of scrap steel and molten iron resources and improving the utilization efficiency of resources and energy are helpful to reduce the environmental hazards of steelmaking system.

scholarly journals Case study of life cycle assessment on battery container

2018 ◽  
Vol 74 ◽  
pp. 05005
Author(s):  
Laurence ◽  
Josephine Kasena
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impact ◽  
Production Process ◽  
Environmental Damage ◽  
Positive Effects ◽  
Potential Environmental Impact ◽  
The Impact

Every year, the total of plastic industry in Indonesia grows rapidly. Not only giving positive effects on economic, but industrial development also causing a negative impact on the environment. Those negative impacts are caused by inefficiently using of resources and industrial waste which could pollute the environment. Therefore, it is necessary to calculate the impact itself by using the Life Cycle Assessment (LCA) method. The LCA could help us to take better decision to improve the production process and products which could minimize the energy consumption and resources. PT XYZ is a plastic injection company. This company hasn't collected, calculated and analysed their products and production process which may contribute to environmental damage. Therefore, this study will collect the data about the potential environmental impact which caused by the product of PT XYZ. LCA was performed at plastic car battery container type "X" and type "Y" using IMPACT 2002+ method in SimaPro8 software. The result of data calculation showing that the potential environmental impact is more dominant in these categories: respiratory inorganics, non-renewable energy, and global warming. The component which caused the greatest potential for respiratory inorganics and global warming is coming from electrical energy consumption (lignite).

scholarly journals A Comparative Life Cycle Assessment of Different Production Processes for Waterborne Polyurethane Dispersions

2021 ◽  
Author(s):  
Valentin Klug ◽  
Josef-Peter Schöggl ◽  
Doris Dallinger ◽  
Clemens Stueckler ◽  
Andreas Steiner ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Impact Category ◽  
Waterborne Polyurethane ◽  
Flow Process ◽  
Production Processes ◽  
Cradle To Gate ◽  
Polyurethane Dispersions ◽  
The Impact ◽  
Comparative Life Cycle Assessment

This study provides a comparative life cycle assessment (LCA) of four different polyurethane dispersion production processes from cradle-to-gate. The environmental performances of the NMP process, the acetone process, the melt process, and a conceptualized continuous flow process were evaluated and compared following the CML 2001 methodology. The LCA revealed that the conceptualized flow process exhibits the lowest environmental impact in all investigated impact categories. Depending on the impact category, the melt process or the acetone process rank second. The NMP process was observed to have the highest impact in all categories. Consequently, the flow process has the lowest carbon footprint (1.13 kg CO2-eq), according to the global warming potential (100 years), followed by the melt (1.45 kg CO2-eq), the acetone (1.95 kg CO2-eq) and the NMP process (3.11 kg CO2-eq).

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

scholarly journals Case study of a water bioengineering construction site in Austria. Ecological aspects and application of an environmental life cycle assessment model

2021 ◽  
Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Assessment Model ◽  
Construction Site ◽  
Negative Effects ◽  
Environmental Life Cycle Assessment ◽  
The Impact ◽  
Soil And Water

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.

scholarly journals Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

2021 ◽  
Vol 11 (9) ◽  
pp. 3820
Author(s):  
Noelia Llantoy ◽  
Gabriel Zsembinszki ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Innovative System ◽  
The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

Sign in / Sign up

Export Citation Format

Share Document