scholarly journals Application of modified green algae Nannochloropsis sp. as adsorbent in the simultaneous adsorption of methylene blue and Cu(II) cations in solution

2021 ◽  
Author(s):  
Buhani ◽  
Tri Agus Wijayanti ◽  
Suharso ◽  
Sumadi ◽  
Muslim Ansori
Keyword(s):  
Heavy Metals ◽  
Methylene Blue ◽  
Green Algae ◽  
Contact Time ◽  
Organic Dyes ◽  
Liquid Waste ◽  
Silica Matrix ◽  
Particle Coating ◽  
Magnetite Particles ◽  
Simultaneous Sorption

Abstract Biomass of algae is a very potent adsorbent for absorbing liquid waste containing heavy metals and organic dyes. This study purposes to confirm the ability of adsorbents from green algae Nannochloropsis sp. modified with silica (ASN) and followed by coating magnetite particles (ASN-MPs) to absorb simultaneously the mixture of methylene blue (ME) and Cu(II) cations in aqueous solution. Simultaneous sorption of ME and Cu(II) cations to ASN and ASN-MPs was carried out by the Batch method with the interaction pH condition 7, contact time 90 minutes, and initial concentrations of ME and Cu(II) cations (0.1 - 1.0 mmol L-1). Based on adsorption data, Cu(II) cations have a greater adsorption rate and capacity (qm) compared to ME at the same contact time and initial concentration. The adsorption capacity (qm) values of the bi-component ME and Cu(II) cation mixture in ASN and ASN-MPs were 1.385 x 10-1 and 5,319 x 10-1 mmolequiv g-1, respectively, with the binary Langmuir adsorption isotherm constant for Cu(II) cations greater than ME. Modified adsorbent from algae Nannochloropsis sp. with silica matrix and magnetite particle coating, is an adsorbent that has a high effectiveness in the collective sorption of ME and Cu(II) cations. Therefore, these adsorbents can be used for the adsorption of cation mixtures of heavy metals and organic dyes that are cationic in solution.

scholarly journals Application of modified green algae Nannochloropsis sp. as adsorbent in the simultaneous adsorption of Methylene Blue and Cu(II) cations in solution

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Buhani ◽  
Tri Agus Wijayanti ◽  
Suharso ◽  
Sumadi ◽  
Muslim Ansori
Keyword(s):  
Heavy Metals ◽  
Methylene Blue ◽  
Green Algae ◽  
Contact Time ◽  
Organic Dyes ◽  
Silica Matrix ◽  
Particle Coating ◽  
Adsorption Data ◽  
Magnetite Particles ◽  
Simultaneous Sorption

AbstractBiomass of algae is a very potent adsorbent for absorbing aqueous waste containing heavy metals and organic dyes. This study purposes to confirm the ability of adsorbents from green algae Nannochloropsis sp. modified with silica (ASN) and followed by coating magnetite particles (ASN-MPs) to absorb simultaneously the mixture of Methylene Blue (ME) and Cu(II) cations in aqueous solution. Simultaneous sorption of ME and Cu(II) cations to ASN and ASN-MPs was carried out by the batch method with the interaction pH condition 7, contact time 90 min, and initial concentrations of ME and Cu(II) cations (0.1–1.0 mM). Based on adsorption data, Cu(II) cations have a greater adsorption rate and capacity (qm) compared to ME at the same contact time and initial concentration. The adsorption capacity (qm) values of the bi-component ME and Cu(II) cation mixture in ASN and ASN-MPs were 1.39 × 10− 1 and 5.32 × 10− 1 mmol g− 1, respectively, with the binary Langmuir adsorption isotherm constant for Cu(II) cations greater than ME. Modified adsorbent from algae Nannochloropsis sp. with silica matrix and magnetite particle coating is an adsorbent that has a high effectiveness in the collective sorption of ME and Cu(II) cations. Therefore, these adsorbents can be used for the adsorption of cation mixtures of heavy metals and organic dyes that are cationic in solution.

scholarly journals Application of Modified Green Algae Nannochloropsis sp. as Adsorbent in the Sequential Adsorption of Methylene Blue and Cu(II) Cations in Solution

2020 ◽  
Author(s):  
Buhani ◽  
Tri Agus Wijayanti ◽  
Suharso ◽  
Sumadi
Keyword(s):  
Heavy Metals ◽  
Methylene Blue ◽  
Green Algae ◽  
Contact Time ◽  
Organic Dyes ◽  
Liquid Waste ◽  
Silica Matrix ◽  
Second Order ◽  
Pseudo Second Order ◽  
Simultaneous Sorption

Abstract Biomass of algae is a very potent adsorbent for absorbing liquid waste containing heavy metals and organic dyes. This study purposes to confirm the ability of adsorbents from green algae Nannochloropsis sp. modified with silica (ASN) and followed by coating magnetite particles (ASN-MPs) to absorb simultaneously the mixture of methylene blue (ME) and Cu(II) cations in aqueous solution. Simultaneous sorption of ME and Cu(II) cations to ASN and ASN-MPs was carried out by the Batch method with the interaction pH condition 7, contact time (15–120 minutes), and initial concentrations of ME and Cu(II) cations (0.1–1.0 mmol·L− 1). The simultaneous sorption parameters of ME and Cu(II) cations by ASN-MPs trend to comply the pseudo-second-order kinetics model by rate constant values for pseudo-second-order (k2), respectively 8.98 × 10− 3 and 9.78 × 10− 3 (g·mmol− 1·min− 1). The ME adsorption pattern and Cu(II) cations in the competition on ASN-MPs adsorbents, each tends to follow the Freundlich and Langmuir adsorption isotherms. Based on adsorption data, Cu(II) cations have a greater adsorption rate and capacity (qexp) compared to ME at the same contact time and initial concentration. Modified adsorbent from algae Nannochloropsis sp. with silica matrix and magnetite particle coating, is an adsorbent that has a high effectiveness in the collective sorption of ME and Cu(II) cations. Therefore, these adsorbents can be used for the adsorption of cation mixtures of heavy metals and organic dyes that are cationic in solution.

Parameters Affecting Dye Adsorption - Using Graphene Coated Sand (GSC)

2018 ◽  
Vol 4 (02) ◽  
Author(s):  
Seroor Atalah Khaleefa Alia ◽  
Dr. Mohammed Ibrahimb ◽  
Hussein Ali Hussein
Keyword(s):  
Heavy Metals ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Dye Adsorption ◽  
Contaminated Water ◽  
Maximum Adsorption Capacity ◽  
Engineering Designs ◽  
Heavy Metals Ions ◽  
Coated Sand

Adsorption is most commonly applied process for the removal of pollutants such as dyes and heavy metals ions from wastewater. The present work talks about preparing graphenic material attached sand grains called graphene sand composite (GSC) by using ordinary sugar as a carbon source. Physical morphology and chemical composition of GSC was examined by using (FTIR, SEM, EDAX and XRD). Efficiency of GSC in the adsorption of organic dyes from water was investigated using reactive green dye with different parameters such as (ph, temperature, contact time and dose). Adsorption isotherm was also studied and the results showed that the maximum adsorption capacity of dye is 28.98 mg/g. This fast, low-cost process can be used to manufacture commercial filters to treat contaminated water using appropriate engineering designs.

scholarly journals Optimization of Methylene Blue Adsorption on Agricultural Solid Waste Using Box–Behnken Design (BBD) Combined with Response Surface Methodology (RSM) Modeling

2021 ◽  
Vol 12 (4) ◽  
pp. 4567-4583
Keyword(s):  
Methylene Blue ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Sem Analysis ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Mb Adsorption

Tunics corm saffron (TCS) is a low-cost adsorbent that removes methylene blue (MB) from an aqueous solution. The TCS was characterized using FTIR and SEM analysis. The influence of MB adsorption variables such as TCS dose (0.4–2.4 g L−1), contact time (0–120 min), MB dye concentration (100–500 mg L−1) was optimized Box–Behnken design (BBD) combined with response surface methodology (RSM) modeling. All three variables among the main parameters significantly affected the removal efficiency by applying the quadratic regression analysis. The results showed that the predicted values for MB adsorption were close to the experimental values and were in good agreement. Besides, the r2 value (r2=0.970) indicates that the regression can predict response for the adsorption process in the studied range. The optimum BBD-RSM for MB removal of 89.48 % was recorded at a TCS dose of 1.78 g L−1, contact time of 56 min, MB dye concentration of 176 mg L–1 at solution pH of 5.4 temperature 21 °C. Excellent regeneration of TCS to remove MB in sixth consecutive adsorption-desorption cycles. This work highlights that TCS offers tremendous potential as a low-cost for organic dyes removal from wastewaters.

scholarly journals Biosorpsi Kromium (Cr) Pada Limbah Cair Industri Elektroplating Menggunakan Biomassa Ragi Roti (Saccharomyces cerevisiae)

Jurnal Dampak ◽  
2018 ◽  
Vol 15 (1) ◽  
pp. 1
Author(s):  
Shinta Elystia ◽  
Resna Rauda Putri ◽  
Sri Rezeki Muria
Keyword(s):  
Heavy Metals ◽  
Saccharomyces Cerevisiae ◽  
Contact Time ◽  
Liquid Waste ◽  
Mesh Size ◽  
Sample Surface ◽  
Sem Analysis ◽  
Biosorption Process ◽  
Before And After ◽  
The Difference

Electroplating industry is one of the industries producing liquid waste containing heavy metals. Among the heavy metals contained in the liquid waste is Chromium (Cr) which has a high toxicity. One technology that can be applied to eliminate Cr metal in liquid waste is by the method Biosorption using biomass derived from yeast bread (Saccharomyces cerevisiae). This study aimed to study the ability of bread yeast biomass (saccharomyces cerevisiae) in removing Cr metal on variations in biosorbent weight of 0.25; 0.5 and 0.75 grams, mesh size 80; 100 and 140 and contact time 1; 2; 3 and 4 hours. The results showed that the highest Cr removing efficiency occurred at 0.75 g biosorbent weight at 80 mesh and 4 hours contact time with efficiency of 54.7%. The biosorption process indicates that the adsorption isotherm type obtained is Langmuir isotherms assumed that the layer formed is monolayer with R2 value of 0.8819. The SEM analysis results show the difference of the morphological shape on the sample surface before and after the biosorption process

Exhibition of novel photocatalytic activity and photoluminescence properties with high inhibition towards bacterial growth by hydrothermally grown ZnO nanorods

2020 ◽  
Vol 16 ◽  
Author(s):  
Nihar Ranjan Panda ◽  
Dojalisa Sahu
Keyword(s):  
Methylene Blue ◽  
Bacterial Growth ◽  
Organic Dyes ◽  
Zno Nanorods ◽  
Antibacterial Properties ◽  
Crystallographic Structure ◽  
Inhibition Activity ◽  
Electron Microscopic ◽  
Skin Bacteria ◽  
High Inhibition

Background: Metal oxide nanomaterial such as; ZnO shows novel structural, optical, electrical and antibacterial properties due to wide band gap (3.37 eV) and high excitonic binding energy (60 meV). Probing these inherent properties of nanosized ZnO with different morphology has generated new interest among researchers Objective: To investigate the size dependent functional attributes, ZnO nanorods were prepared by hydrothermal method and the photocatalytic (PC) efficiency was studied. The photoluminescence (PL) property of ZnO nanorods was also studied by recording the emission spectrum under photo-excitation. These nanorods (NRs) were coated on cotton fabric to study the effectiveness of these NRs in defending and inhibiting the growth of different bacteria Methods: The crystallographic structure and morphology of the ZnO samples were investigated by X-ray diffraction (XRD) and field emission scanning electron microscopic (FESEM) measurements. PL measurement at room temperature was undertaken by exciting the sample with light of wavelength 350 nm. The PC property of ZnO NRs was studied in degrading organic dyes like methylene blue. Bacteria like Staphylococcus aureus, Escherichia coli and Bacillus subtilis were cultured and the inhibition of growth of these bacteria was studied by the application of ZnO. To enhance the microbe defence mechanism of fabric, we coated these NRs on fabric test samples and investigated the bacterial growth on it. Results: XRD and FESEM studies reveal the dimension of the synthesized products in nano range. These nanorods are of high density and surface roughness as per the FESEM study. PL measurement shows the presence of strong UV emission at 382 nm with defect emissions in the blue-green region opening up the path for ZnO to be used in fabrication of optoelectronic devices. PC study reveals that 89% degradation of methylene blue (MB) dye is achievable in 180 min using these ZnO catalysts. The anti-bacterial study shows that the minimum inhibitory concentration (MIC) of ZnO nanorods coated on the fabric against S. aureus is found to be 3.5 mg/ml which is the minimum as compared to E. coli (7.5 mg/ml) and B. subtilis (5.5 mg/ml). The study further enunciates that fabric coated with ZnO samples exhibited considerably high inhibition activity toward S. aureus. Conclusion: The study shows that ZnO NRs can be effectively used for fabrication of UV-LASER/LED. Photocatalytic efficiency of ZnO will be useful for degradation of organic dyes controlling environment pollution. It further enunciates that fabric coated with ZnO samples exhibited considerably high inhibition activity toward S. aureus (skin bacteria) which will be helpful in defending microbes if used in surgical cotton bandages

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

Sorption of Water Soluble Organic Dyes on Magnetic Poly(oxy-2,6-dimethyl-1,4-phenylene)

1995 ◽  
Vol 60 (9) ◽  
pp. 1448-1456 ◽  
Author(s):  
Ivo Šafařík ◽  
Miroslava Šafaříková ◽  
Vlasta Buřičová
Keyword(s):  
Organic Compounds ◽  
Azo Dye ◽  
Organic Dyes ◽  
Water Soluble ◽  
Magnetic Composite ◽  
Water Solutions ◽  
Magnetite Particles

Magnetic composite based on poly(oxy-2,6-dimethyl-1,4-phenylene) (PODMP) was prepared by melting the polymer with ε-caprolactam in a presence of fine magnetite particles. Magnetic PODMP was used for sorption of water soluble organic compounds (dyes belonging to triphenylmethane, heteropolycyclic and azo dye groups) from water solutions. There were considerable differences in the binding of the dyes tested. In general, heteropolycyclic dyes exhibited the lowest sorption.

scholarly journals Polyelectrolyte Functionalisation of Track Etched Membranes: Towards Charge-Tuneable Adsorber Materials

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 509
Author(s):  
Lisa Wiedenhöft ◽  
Mohamed M. A. Elleithy ◽  
Mathias Ulbricht ◽  
Felix H. Schacher
Keyword(s):  
Methylene Blue ◽  
Heavy Metal Ions ◽  
Glycolic Acid ◽  
Organic Dyes ◽  
Langmuir Model ◽  
Surface Grafting ◽  
Hydraulic Permeability ◽  
Cylindrical Pores ◽  
Model Substances ◽  
External Stimuli

Porous adsorber membranes are promising materials for the removal of charged pollutants, such as heavy metal ions or organic dyes as model substances for pharmaceuticals from water. Here, we present the surface grafting of polyethylene terephthalate (PET) track-etched membranes having well defined cylindrical pores of 0.2 or 1 µm diameter with two polyelectrolytes, poly(2-acrylamido glycolic acid) (PAGA) and poly(N-acetyl dehydroalanine) (PNADha). The polyelectrolyte functionalised membranes were characterised by changes in wettability and hydraulic permeability in response to the external stimuli pH and the presence of Cu2+ ions. The response of the membranes proved to be consistent with functionalisation inside the pores, and the change of grafted polyelectrolyte macro-conformation was due to the reversible protonation or binding of Cu2+ ions. Moreover, the adsorption of the model dye methylene blue was studied and quantified. PAGA-grafted membranes showed an adsorption behavior following the Langmuir model for methylene blue.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document