scholarly journals Mitigating nitrogen pollution from global croplands with cost-effective measures

Author(s):  
Baojing Gu ◽  
Xiuming Zhang ◽  
Shu Lam ◽  
Yingliang Yu ◽  
Hans van Grinsven ◽  
...  

Abstract Cropland is one of the major sources of global nitrogen pollution1, 2. Mitigating nitrogen pollution from global croplands is a grand challenge because of the nature of non-point source pollution from millions of farms and the lack of financial resources and scientific knowledge of farmers3. Here we synthesize 683 studies worldwide and identify 11 key measures which can reduce 30-70% of nitrogen pollution while increasing crop yield and nitrogen use efficiency by 10-30% and 20-60%, respectively. Adoption of these measures would produce 14 million tonnes (Tg) more crop nitrogen with 28 Tg less nitrogen fertilizer and 27 Tg less nitrogen pollution to the environment in global croplands in 2015. However, to achieve these potentials, innovative policies such as a nitrogen credit system (NCS) should be implemented to incentivize and subsidize the adoption of these measures given the mismatch between benefits for the whole society while the abatement cost only for farmers. Full implementation of the best-fitted measures could achieve 306 billion USD benefits on ecosystem, human health and climate globally, with net mitigation costs of only 21 billion USD given 35 billion USD fertilizer saving cost has offset 2/3 of the total mitigation cost. The large benefit-to-cost ratio suggests the feasibility and urgency to implement the NCS and Tier approaches could help to implement the most cost-effective measures on regional and local scales.

By continuous and rapid growth in industrialization as well as population, the agricultural lands are also becoming less and less continuously day by day which results in increase in the population of small land holders. In addition to this, because of continuous decreasing production the youth of the villages are also migrating in big cities for the employment, resulting decreasing manpower essential to perform various seedbed operations in the villages. Hence, it is the need of time for small farmers having small agricultural land and having less crop production to introduce the cost-effective farm mechanization so that they can improve production rate. Rotavator is the best option available to achieve this landmark as it is already proved that seedbed prepared by using rotavator gives highest benefit to cost ratio. For this experimental study the whole land of 9 acre area is divided into 18 plots of equal size in area. The combination of method of seedbed preparation and use of fertilizers were the preliminary criteria. The categories of fertilizer according to quantity are discussed earlier which are 50kg, 35kg and 65kg per acre respectively. The quantities of organic fertilizer used are 45kg and 60kg per acre of agricultural land for both seedbeds which are prepared manually and by using rotavator. The highest production of Pigeon Pea was obtained of 814kg was from the plot whose seedbed is prepared by using agricultural machine called rotavator and organic fertilizer; next highest production is obtained of 802 kg from the plot whose seedbed is prepared by using rotavator and the fertilizer used was chemical fertilizer. The minimum production of Pigeon Pea which is 690 kg was obtained in the plot whose seedbed was prepared manually and chemical fertilizer was used.


2021 ◽  
Author(s):  
Sam Jones ◽  
Adam Joyce ◽  
Nikhil Balasubramanian

Abstract Objectives/Scope There are many different views on the Energy Transition. What is agreed is that to achieve current climate change targets, the journey to deep decarbonisation must start now. Scope 3 emissions are clearly the major contributor to total emissions and must be actively reduced. However, if Oil and Gas extraction is to be continued, then operators must understand, measure, and reduce Scope 1 and 2 emissions. This paper examines the constituent parts of typical Scope 1 emissions for O&G assets and discusses a credible pathway and initial steps towards decarbonisation of operations. Methods, Procedures, Process Emissions from typical assets are investigated: data is examined to determine the overall and individual contributions of Scope 1 emissions. A three tiered approach to emissions savings is presented: – Reduce overall energy usage – Seek to Remove environmental losses – Replace energy supply with low carbon alternatives A simple method, used to assess carbon emissions, based on an abatement of carbon from a cost per CO2 tonne averted basis is described. This method, Marginal Abatement Cost Curve (MACC), is based solely on cost efficiency. Other criteria such as safety, weight, footprint and reliability are not considered. Credible pathway for reduction of Scope 1 emissions is presented. Taking appropriate actions as described in the pathway, contributors are eliminated in a strategic order, allowing operators to contribute to deep decarbonisation. Results, Observations, Conclusions A typical offshore installation was modelled with a number of carbon abatement measures implemented. Results are presented as cost effective or non-cost-effective CO2 measures together with the residual CO2 emissions. Based on the data presented, many of the replace measures have a higher cost per tonne of CO2 abated than reduce and remove measure. These findings indicate that additional technological advancement may be needed to make alternative power solutions commercially viable. It also indicates that several CO2 abatement measures are cost effective today. The pathway proposes actions to implement carbon savings for offshore operators, it differentiates actions which can be taken today and those which require further technological advancement before they become commercially viable. The intent of this pathway is to demonstrate that the energy transition is not solely the preserve of the largest operators and every company can take positive steps towards supporting decarbonisation. Novel/Additive Information The world needs security of energy supply. Hydrocarbons are still integral; however, oil and gas operators must contribute to carbon reduction for society to meet the energy transition challenges. As government and societal appetite for decarbonisation heightens, demands are growing for traditional hydrocarbon assets to reduce their carbon footprint if they are to remain part of the energy mix. Society and therefore regulators will demand that more is done to address emissions during this transitional phase, consequently necessitating that direct emissions are reduced as much as possible. The pathway is accessible to all today, we need not wait for novel technologies to act.


2015 ◽  
Vol 1 (1) ◽  
pp. 112-122 ◽  
Author(s):  
Shiva Chandra Dhakal ◽  
Punya Prasad Regmi ◽  
Resham Bahadur Thapa ◽  
Shrawan Kumar Sah ◽  
Dilli Bahadur Khatri-Chhetri

The study was conducted to determine the productivity, profitability and resource use efficiency of maize-pumpkin mix crop production in Chitwan. The study used 53 maize-pumpkin mix crop adopting farmers from among 300 farmers adopting different pollinator friendly practices. Descriptive and statistical tools including Cobb-Douglas production function were used to analyze data, collected from structured interview schedule. The benefit cost ratio (1.58) indicates that maize-pumpkin mix cropping was profitable with productivity of 2.83 ton per ha on maize main product equivalent basis. The magnitude of regression coefficients of maize-pumpkin mix cropping implied that expenditure on seed and fertilizer and irrigation had significant positive effect on gross return with estimated decreasing return to scale (0.85). According to estimated allocative efficiency indices, it is suggested to increase expenditure on seed and fertilizer cum irrigation by about 90% and 55% respectively. Extension of modern technologies with adjustment on resource use is to be encouraged for increase in productivity and profitability of maize-pumpkin mix crop production which indirectly promotes and ensure forage for pollinatorsJournal of Maize Research and Development (2015) 1(1):112-122DOI: http://dx.doi.org/10.5281/zenodo.34290


2020 ◽  
pp. 096228022095817
Author(s):  
Linchen He ◽  
Linqiu Du ◽  
Zoran Antonijevic ◽  
Martin Posch ◽  
Valeriy R Korostyshevskiy ◽  
...  

Previous work has shown that individual randomized “proof-of-concept” (PoC) studies may be designed to maximize cost-effectiveness, subject to an overall PoC budget constraint. Maximizing cost-effectiveness has also been considered for arrays of simultaneously executed PoC studies. Defining Type III error as the opportunity cost of not performing a PoC study, we evaluate the common pharmaceutical practice of allocating PoC study funds in two stages. Stage 1, or the first wave of PoC studies, screens drugs to identify those to be permitted additional PoC studies in Stage 2. We investigate if this strategy significantly improves efficiency, despite slowing development. We quantify the benefit, cost, benefit-cost ratio, and Type III error given the number of Stage 1 PoC studies. Relative to a single stage PoC strategy, significant cost-effective gains are seen when at least one of the drugs has a low probability of success (10%) and especially when there are either few drugs (2) with a large number of indications allowed per drug (10) or a large portfolio of drugs (4). In these cases, the recommended number of Stage 1 PoC studies ranges from 2 to 4, tracking approximately with an inflection point in the minimization curve of Type III error.


Agriculture ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 81
Author(s):  
Franklin B. Martínez ◽  
Francisco Guevara ◽  
Carlos E. Aguilar ◽  
René Pinto ◽  
Manuel A. La O ◽  
...  

Analysis of energy flows and economic dynamics allows the diversity of variables involved in the agroecosystem production to be observed in the same dimension. In this way, efficiency and performance can be analysed integrally to identify critical points to be improved. The objective of this study was to analyse the energy-economic efficiency within three management strategies (Management I, Management II and Management III) of the maize agroecosystem in the Frailesca region of Chiapas (Mexico). The hypothesis was that systemic typologies, defined by modes of production, can lead to different efficiencies for the system performance. The study was descriptive; case studies were selected as representative based on their technological variants. The efficiency analysis was conducted using a balance of inputs and outputs expressed in energy and economic terms. Management III resulted in better energy use efficiency, with 6.47, while Management I and Management II were more economically feasible, with a benefit/cost ratio of 1.56 pesos.


2018 ◽  
Vol 69 (5) ◽  
pp. 479 ◽  
Author(s):  
Nauman Ali ◽  
Muhammad Farooq ◽  
Muhammad Ahmad Hassan ◽  
Muhammad Shakeel Arshad ◽  
Muhammad Kamran Saleem ◽  
...  

Agronomic biofortification by seed treatments is a convenient way to harvest improved yields of micronutrient-enriched grains. This 2-year field study was conducted to evaluate the effects of seed priming with zinc (Zn), boron (B) and manganese (Mn) alone and in combinations on stand establishment, grain yield and biofortification of bread wheat (Triticum aestivum L.). Seeds of wheat cv. Faisalabad-2008 were soaked in aerated solutions of 0.5 m Zn, 0.01 m B and 0.1 m Mn, alone and in different combinations, for 12 h. Seed priming with the micronutrients was quite effective in improving stand establishment, yield-contributing traits, grain yield, and straw and grain micronutrient contents during both years. Best stand establishment was achieved from seed priming with Zn+B, followed by seed priming with Zn+Mn. Grain yield improvement from different seed priming treatments was in the order Zn+B > Zn+Mn > Zn > B > Mn > Zn+B+Mn, with respective increases of 34%, 33%, 21%, 19%, 18% and 8% relative to untreated seeds. Seed priming with Zn, B and Mn alone and in combinations also improved the contents of the respective micronutrients in straw and grain. All seed priming treatments were economically profitable except Zn+B+Mn, which was not cost-effective. The highest benefit : cost ratio accrued from seed priming with Zn+B. In conclusion, seed priming with micronutrients was generally cost-effective in meeting the crop micronutrient requirements, and in improving crop stand, grain yield and grain micronutrient contents in bread wheat. Seed priming with Zn+B was the most effective in this regard.


1970 ◽  
Vol 8 (2) ◽  
pp. 271-276 ◽  
Author(s):  
MA Halim ◽  
MA Kashem ◽  
JU Ahmed ◽  
M Hossain

The study was carried out in 5 Upazilas under Chittagong district with a view to analyze the present socio-economic status of RCC farming practices on 100 RCC rearers (Potiya, Raujan, Chandanaish, Anowara and Satkania Upazila). The study showed that, about 39.00 percent of RCC farm owners were landless, 31.00 percent were small and marginal farmers, 17.00 percent were medium and 13.00 percent were large farmers according to their landholding sizes. The cost of rearing RCC per cattle per year was found to be Tk. 17503.76, Tk. 15540.27, and Tk. 33044.03 as cash cost, non cash cost and total cost respectively. The study also revealed that, average daily milk yield, lactation yield and lactation length of RCC were found to be 2.71 liters, 581.61 liters and 215.41 days, respectively. The average per year per cattle gross return of RCC was found Tk. 25390.41. The gross returns over cash cost and full cost basis of rearing per lactation per cattle of RCC were found at Tk 8058.642 and Tk.-7501.53, respectively. The benefit cost ratio on the basis of cash cost and full costs per year per cattle was found 1.47 and 0.77, respectively. The study also revealed that, the rural farmers prefer RCC farming than other breeds due to high conception rate, each year calving, disease resistance, high milk fat per cent and cost effective farming. Keyword: RCC; Cost; Return; Profitability; Disease Occurrences DOI: 10.3329/jbau.v8i2.7937 J. Bangladesh Agril. Univ. 8(2): 271-276, 2010  


1997 ◽  
Vol 2 (2) ◽  
pp. 81-85 ◽  
Author(s):  
David Torgerson ◽  
Marion Campbell

Objectives: In the majority of clinical trials patients are randomised equally between treatment groups. This approach maximises statistical power for a given total sample size. The objectives of this paper were to determine if, when research costs between treatments differ, it is more economically efficient to randomise additional patients to the cheaper treatment, and how the optimum randomisation ratio can be estimated. Methods: Estimation of the most economically efficient randomisation ratio for four hypothetical clinical trials using cost-effectiveness analysis. Results: When research costs differ between treatments, and there is no constraint on total sample size, it is always more cost-effective to randomise more patients to the cheaper treatment. For example, a cost ratio between the lesser and more expensive treatment of ten, results in a randomisation ratio of 3.2:1. Conclusions: Unequal randomisation ratios should be more widely used as this will achieve optimum statistical power for the lowest expenditure of research resources.


2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Steve J. Merrill ◽  
Alexander Paz ◽  
Victor Molano ◽  
Pramen P. Shrestha ◽  
Pankaj Maheshwari ◽  
...  

This study provides an economic evaluation for a Land Ferry, which is a rail system capable of carrying trucks and all other types of vehicles, passengers, and cargo. The Land Ferry system involves a sliding loading system to roll heavy loads onto a flatbed; as a result, loading and unloading of all vehicles and cargo could be accomplished simultaneously. The evaluation for this system included (1) the design of a new track alignment over which the Land Ferry system would run, (2) evaluation of various sources of power, (3) estimation of how many local jobs the Land Ferry would generate, and (4) a benefit-cost analysis. It was estimated that the Land Ferry would create over 45,788 temporary jobs in Nevada during the three-year construction period and 318 permanent jobs during operation. The majority of the benefits were attributed to savings in travel time ($356.4 M), vehicle operating costs ($1000.4 M), reduction of accidents ($544.6 M), and pavement maintenance ($503.2 M). These benefits would be a consequence of the shift of trucks from the highway, thus resulting in higher speeds, decrease fuel consumption, and decrease vehicle maintenance costs. The overall benefit-cost ratio of 1.7 implies a cost-effective project.


Sign in / Sign up

Export Citation Format

Share Document