scholarly journals Omnidirectional Transfer for Quasilinear Lifelong Learning

Author(s):  
Jayanta Dey ◽  
Joshua Vogelstein ◽  
Hayden Helm ◽  
Will Levine ◽  
Ronak Mehta ◽  
...  

Abstract In biological learning, data are used to improve performance not only on the current task, but also on previously encountered and as yet unencountered tasks. In contrast, classical machine learning starts from a blank slate, or tabula rasa, using data only for the single task at hand. While typical transfer learning algorithms can improve performance on future tasks, their performance on prior tasks degrades upon learning new tasks (called catastrophic forgetting). Many recent approaches for continual or lifelong learning have attempted to maintain performance given new tasks. But striving to avoid forgetting sets the goal unnecessarily low: the goal of lifelong learning, whether biological or artificial, should be to improve performance on all tasks (including past and future) with any new data. We propose omnidirectional transfer learning algorithms, which includes two special cases of interest: decision forests and deep networks. Our key insight is the development of the omni-voter layer, which ensembles representations learned independently on all tasks to jointly decide how to proceed on any given new data point, thereby improving performance on both past and future tasks. Our algorithms demonstrate omnidirectional transfer in a variety of simulated and real data scenarios, including tabular data, image data, spoken data, and adversarial tasks. Moreover, they do so with quasilinear space and time complexity.

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2650
Author(s):  
Daegyun Choi ◽  
William Bell ◽  
Donghoon Kim ◽  
Jichul Kim

Structural cracks are a vital feature in evaluating the health of aging structures. Inspectors regularly monitor structures’ health using visual information because early detection of cracks on highly trafficked structures is critical for maintaining the public’s safety. In this work, a framework for detecting cracks along with their locations is proposed. Image data provided by an unmanned aerial vehicle (UAV) is stitched using image processing techniques to overcome limitations in the resolution of cameras. This stitched image is analyzed to identify cracks using a deep learning model that makes judgements regarding the presence of cracks in the image. Moreover, cracks’ locations are determined using data from UAV sensors. To validate the system, cracks forming on an actual building are captured by a UAV, and these images are analyzed to detect and locate cracks. The proposed framework is proven as an effective way to detect cracks and to represent the cracks’ locations.


2021 ◽  
Vol 29 (1) ◽  
pp. 19-36
Author(s):  
Çağín Polat ◽  
Onur Karaman ◽  
Ceren Karaman ◽  
Güney Korkmaz ◽  
Mehmet Can Balcı ◽  
...  

BACKGROUND: Chest X-ray imaging has been proved as a powerful diagnostic method to detect and diagnose COVID-19 cases due to its easy accessibility, lower cost and rapid imaging time. OBJECTIVE: This study aims to improve efficacy of screening COVID-19 infected patients using chest X-ray images with the help of a developed deep convolutional neural network model (CNN) entitled nCoV-NET. METHODS: To train and to evaluate the performance of the developed model, three datasets were collected from resources of “ChestX-ray14”, “COVID-19 image data collection”, and “Chest X-ray collection from Indiana University,” respectively. Overall, 299 COVID-19 pneumonia cases and 1,522 non-COVID 19 cases are involved in this study. To overcome the probable bias due to the unbalanced cases in two classes of the datasets, ResNet, DenseNet, and VGG architectures were re-trained in the fine-tuning stage of the process to distinguish COVID-19 classes using a transfer learning method. Lastly, the optimized final nCoV-NET model was applied to the testing dataset to verify the performance of the proposed model. RESULTS: Although the performance parameters of all re-trained architectures were determined close to each other, the final nCOV-NET model optimized by using DenseNet-161 architecture in the transfer learning stage exhibits the highest performance for classification of COVID-19 cases with the accuracy of 97.1 %. The Activation Mapping method was used to create activation maps that highlights the crucial areas of the radiograph to improve causality and intelligibility. CONCLUSION: This study demonstrated that the proposed CNN model called nCoV-NET can be utilized for reliably detecting COVID-19 cases using chest X-ray images to accelerate the triaging and save critical time for disease control as well as assisting the radiologist to validate their initial diagnosis.


Author(s):  
Sharmad Joshi ◽  
Jessie Ann Owens ◽  
Shlok Shah ◽  
Thilanka Munasinghe
Keyword(s):  

2021 ◽  
Vol 17 (3) ◽  
pp. e1008256
Author(s):  
Shuonan Chen ◽  
Jackson Loper ◽  
Xiaoyin Chen ◽  
Alex Vaughan ◽  
Anthony M. Zador ◽  
...  

Modern spatial transcriptomics methods can target thousands of different types of RNA transcripts in a single slice of tissue. Many biological applications demand a high spatial density of transcripts relative to the imaging resolution, leading to partial mixing of transcript rolonies in many voxels; unfortunately, current analysis methods do not perform robustly in this highly-mixed setting. Here we develop a new analysis approach, BARcode DEmixing through Non-negative Spatial Regression (BarDensr): we start with a generative model of the physical process that leads to the observed image data and then apply sparse convex optimization methods to estimate the underlying (demixed) rolony densities. We apply BarDensr to simulated and real data and find that it achieves state of the art signal recovery, particularly in densely-labeled regions or data with low spatial resolution. Finally, BarDensr is fast and parallelizable. We provide open-source code as well as an implementation for the ‘NeuroCAAS’ cloud platform.


2021 ◽  
Vol 8 ◽  
Author(s):  
Tianshu Gu ◽  
Lishi Wang ◽  
Ning Xie ◽  
Xia Meng ◽  
Zhijun Li ◽  
...  

The complexity of COVID-19 and variations in control measures and containment efforts in different countries have caused difficulties in the prediction and modeling of the COVID-19 pandemic. We attempted to predict the scale of the latter half of the pandemic based on real data using the ratio between the early and latter halves from countries where the pandemic is largely over. We collected daily pandemic data from China, South Korea, and Switzerland and subtracted the ratio of pandemic days before and after the disease apex day of COVID-19. We obtained the ratio of pandemic data and created multiple regression models for the relationship between before and after the apex day. We then tested our models using data from the first wave of the disease from 14 countries in Europe and the US. We then tested the models using data from these countries from the entire pandemic up to March 30, 2021. Results indicate that the actual number of cases from these countries during the first wave mostly fall in the predicted ranges of liniar regression, excepting Spain and Russia. Similarly, the actual deaths in these countries mostly fall into the range of predicted data. Using the accumulated data up to the day of apex and total accumulated data up to March 30, 2021, the data of case numbers in these countries are falling into the range of predicted data, except for data from Brazil. The actual number of deaths in all the countries are at or below the predicted data. In conclusion, a linear regression model built with real data from countries or regions from early pandemics can predict pandemic scales of the countries where the pandemics occur late. Such a prediction with a high degree of accuracy provides valuable information for governments and the public.


Author(s):  
Aditya Rajbongshi ◽  
Thaharim Khan ◽  
Md. Mahbubur Rahman ◽  
Anik Pramanik ◽  
Shah Md Tanvir Siddiquee ◽  
...  

<p>The acknowledgment of plant diseases assumes an indispensable part in taking infectious prevention measures to improve the quality and amount of harvest yield. Mechanization of plant diseases is a lot advantageous as it decreases the checking work in an enormous cultivated area where mango is planted to a huge extend. Leaves being the food hotspot for plants, the early and precise recognition of leaf diseases is significant. This work focused on grouping and distinguishing the diseases of mango leaves through the process of CNN. DenseNet201, InceptionResNetV2, InceptionV3, ResNet50, ResNet152V2, and Xception all these models of CNN with transfer learning techniques are used here for getting better accuracy from the targeted data set. Image acquisition, image segmentation, and features extraction are the steps involved in disease detection. Different kinds of leaf diseases which are considered as the class for this work such as anthracnose, gall machi, powdery mildew, red rust are used in the dataset consisting of 1500 images of diseased and also healthy mango leaves image data another class is also added in the dataset. We have also evaluated the overall performance matrices and found that the DenseNet201 outperforms by obtaining the highest accuracy as 98.00% than other models.</p>


2014 ◽  
Vol 8 (2) ◽  
Author(s):  
Ahmed El-Mowafy ◽  
Congwei Hu

AbstractThis study presents validation of BeiDou measurements in un-differenced standalone mode and experimental results of its application for real data. A reparameterized form of the unknowns in a geometry-free observation model was used. Observations from each satellite are independently screened using a local modeling approach. Main advantages include that there is no need for computation of inter-system biases and no satellite navigation information are needed. Validation of the triple-frequency BeiDou data was performed in static and kinematic modes, the former at two continuously operating reference stations in Australia using data that span two consecutive days and the later in a walking mode for three hours. The use of the validation method parameters for numerical and graphical diagnostics of the multi-frequency BeiDou observations are discussed. The precision of the system’s observations was estimated using an empirical method that utilizes the characteristics of the validation statistics. The capability of the proposed method is demonstrated in detection and identification of artificial errors inserted in the static BeiDou data and when implemented in a single point positioning processing of the kinematic test.


2013 ◽  
pp. 437-455
Author(s):  
E. Antúnez ◽  
Y. Haxhimusa ◽  
R. Marfil ◽  
W. G. Kropatsch ◽  
A. Bandera

Computer vision systems have to deal with thousands, sometimes millions of pixel values from each frame, and the computational complexity of many problems related to the interpretation of image data is very high. The task becomes especially difficult if a system has to operate in real-time. Within the Combinatorial Pyramid framework, the proposed computational model of attention integrates bottom-up and top-down factors for attention. Neurophysiologic studies have shown that, in humans, these two factors are the main responsible ones to drive attention. Bottom-up factors emanate from the scene and focus attention on regions whose features are sufficiently discriminative with respect to the features of their surroundings. On the other hand, top-down factors are derived from cognitive issues, such as knowledge about the current task. Specifically, the authors only consider in this model the knowledge of a given target to drive attention to specific regions of the image. With respect to previous approaches, their model takes into consideration not only geometrical properties and appearance information, but also internal topological layout. Once the focus of attention has been fixed to a region of the scene, the model evaluates if the focus is correctly located over the desired target. This recognition algorithm considers topological features provided by the pre-attentive stage. Thus, attention and recognition are tied together, sharing the same image descriptors.


Author(s):  
R. Suganya ◽  
Rajaram S. ◽  
Kameswari M.

Currently, thyroid disorders are more common and widespread among women worldwide. In India, seven out of ten women are suffering from thyroid problems. Various research literature studies predict that about 35% of Indian women are examined with prevalent goiter. It is very necessary to take preventive measures at its early stages, otherwise it causes infertility problem among women. The recent review discusses various analytics models that are used to handle different types of thyroid problems in women. This chapter is planned to analyze and compare different classification models, both machine learning algorithms and deep leaning algorithms, to classify different thyroid problems. Literature from both machine learning and deep learning algorithms is considered. This literature review on thyroid problems will help to analyze the reason and characteristics of thyroid disorder. The dataset used to build and to validate the algorithms was provided by UCI machine learning repository.


Sign in / Sign up

Export Citation Format

Share Document