scholarly journals UseDa - a new database tool on ethnobotanical uses of West African plant species

2014 ◽  
Vol 17 ◽  
pp. 42-48
Author(s):  
Karen Hahn ◽  
Marco Schmidt ◽  
Anne Mette Lykke ◽  
Adjima Thiombiano
Keyword(s):  
Large Scale ◽  
Local Level ◽  
Grey Literature ◽  
Data Sets ◽  
Practical Applications ◽  
Online Databases ◽  
User Groups ◽  
Funded Project ◽  
Ethnobotanical Uses ◽  
Set Up

Knowledge about useful plants and their various applications in West Africa is scattered over many publications and often in form of grey literature difficult to access. Several online-databases compile large scale information from these sources and provide comprehensive summarized descriptions of plant usages. Our aim is to additionally build up a database (UseDa) for primary ethnobotanical interview data. Thus, quantitative data can be extracted and synthesized and data sets can be treated according to different research questions analyzing for example uses in specific areas, of different ethnic groups or user groups, which is essential for practical applications on a local level. In this article we give an overview on the technical structure and the content of the database and discuss at the end the possible output for practical application. The database was set up in the frame of the EU-funded Project UNDESERT.

scholarly journals Secure Privacy Preserving Record Linkage of Large Databases by Modified Bloom Filter Encodings

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Rainer Schnell ◽  
Christian Borgs
Keyword(s):  
Record Linkage ◽  
Large Scale ◽  
Bloom Filter ◽  
Privacy Preserving ◽  
Error Rates ◽  
Bloom Filters ◽  
Data Sets ◽  
Research Subjects ◽  
Practical Applications ◽  
Large Databases

ABSTRACTObjectiveIn most European settings, record linkage across different institutions has to be based on personal identifiers such as names, birthday or place of birth. To protect the privacy of research subjects, the identifiers have to be encrypted. In practice, these identifiers show error rates up to 20% per identifier, therefore linking on encrypted identifiers usually implies the loss of large subsets of the databases. In many applications, this loss of cases is related to variables of interest for the subject matter of the study. Therefore, this kind of record-linkage will generate biased estimates. These problems gave rise to techniques of Privacy Preserving Record Linkage (PPRL). Many different PPRL techniques have been suggested within the last 10 years, very few of them are suitable for practical applications with large database containing millions of records as they are typical for administrative or medical databases. One proven technique for PPRL for large scale applications is PPRL based on Bloom filters.MethodUsing appropriate parameter settings, Bloom filter approaches show linkage results comparable to linkage based on unencrypted identifiers. Furthermore, this approach has been used in real-world settings with data sets containing up to 100 Million records. By the application of suitable blocking strategies, linking can be done in reasonable time.ResultHowever, Bloom filters have been subject of cryptographic attacks. Previous research has shown that the straight application of Bloom filters has a nonzero re-identification risk. We will present new results on recently developed techniques to defy all known attacks on PPRL Bloom filters. These computationally simple algorithms modify the identifiers by different cryptographic diffusion techniques. The presentation will demonstrate these new algorithms and show their performance concerning precision, recall and re-identification risk on large databases.

scholarly journals Community health workers at the dawn of a new era: 9. CHWs’ relationships with the health system and communities

2021 ◽  
Vol 19 (S3) ◽  
Author(s):  
Karen LeBan ◽  
Maryse Kok ◽  
Henry B. Perry
Keyword(s):  
Health System ◽  
Community Health ◽  
Community Health Workers ◽  
Large Scale ◽  
Health Workers ◽  
Local Level ◽  
Grey Literature ◽  
Community Context ◽  
New Era

Abstract Background This is the ninth paper in our series, “Community Health Workers at the Dawn of a New Era”. Community health workers (CHWs) are in an intermediary position between the health system and the community. While this position provides CHWs with a good platform to improve community health, a major challenge in large-scale CHW programmes is the need for CHWs to establish and maintain beneficial relationships with both sets of actors, who may have different expectations and needs. This paper focuses on the quality of CHW relationships with actors at the local level of the national health system and with communities. Methods The authors conducted a selective review of journal articles and the grey literature, including case study findings in the 2020 book Health for the People: National CHW Programs from Afghanistan to Zimbabwe. They also drew upon their experience working with CHW programmes. Results The space where CHWs form relationships with the health system and the community has various inherent strengths and tensions that can enable or constrain the quality of these relationships. Important elements are role clarity for all actors, working referral systems, and functioning supply chains. CHWs need good interpersonal communication skills, good community engagement skills, and the opportunity to participate in community-based organizations. Communities need to have a realistic understanding of the CHW programme, to be involved in a transparent process for selecting CHWs, and to have the opportunity to participate in the CHW programme. Support and interaction between CHWs and other health workers are essential, as is positive engagement with community members, groups, and leaders. Conclusion To be successful, large-scale CHW programmes need well-designed, effective support from the health system, productive interactions between CHWs and health system staff, and support and engagement of the community. This requires health sector leadership from national to local levels, support from local government, and partnerships with community organizations. Large-scale CHW programmes should be designed to enable local flexibility in adjusting to the local community context.

scholarly journals SKILLING INDIA: NO TIME TO LOSE

2020 ◽  
pp. 1-4
Author(s):  
Suryakant Ratan Chaugule
Keyword(s):  
Large Scale ◽  
Policy Research ◽  
Economic Research ◽  
Data Sets ◽  
National Council ◽  
State Governments ◽  
Think Tank ◽  
Policy Choices ◽  
The Media ◽  
Set Up

The National Council of Applied Economic Research is India's oldest and largest independent economic think-tank, set up in 1956 to inform policy choices for both governments and industry. For more than six decades, NCAER has served the nation with its rich offering of applied policy research, unique data sets, evaluations and policy inputs to central and state governments, corporate India, the media and informed citizens. It is one of a few think-tanks world-wide that combine rigorous analysis and policy outreach with deep data collection capabilities, especially for large-scale household surveys.

scholarly journals Material patterning on substrates by manipulation of fluidic behavior

2019 ◽  
Vol 6 (4) ◽  
pp. 758-766 ◽  
Author(s):  
Yitan Li ◽  
Hao Wang ◽  
Henglu Xu ◽  
Shiting Wu ◽  
Xuemei Li ◽  
...  
Keyword(s):  
Large Scale ◽  
Flow Behavior ◽  
Functional Materials ◽  
General Strategy ◽  
Practical Applications ◽  
Substrate Heating ◽  
Organic Hybrid ◽  
Bottom Cooling ◽  
Set Up ◽  
Patterned Materials

ABSTRACT Patterned materials on substrates are of great importance for a wide variety of applications. In solution-based approaches to material patterning, fluidic flow is inevitable. Here we demonstrate not only the importance of fluidic behavior but also the methodology of engineering the flow pattern to guide the material crystallization and assembly. We show by both experiment and simulation that substrate heating, which is generally used to accelerate evaporation, produces irregular complex vortexes. Instead, a top-heating–bottom-cooling (THBC) set-up offers an inverse temperature gradient and results in a single Marangoni vortex, which is desired for ordered nanomaterial patterning near the contact line. We then realize the fabrication of large-scale patterns of iodide perovskite crystals on different substrates under THBC conditions. We further demonstrate that harnessing the flow behavior is a general strategy with great feasibility to pattern various functional materials ranging from inorganic, organic, hybrid to biological categories on different substrates, presenting great potential for practical applications.

Platelet Anti-Aggregating Activity and Tolerance of Clopidogrel in Atherosclerotic Patients

1996 ◽  
Vol 76 (06) ◽  
pp. 0939-0943 ◽  
Author(s):  
B Boneu ◽  
G Destelle ◽  
Keyword(s):  
Platelet Aggregation ◽  
Large Scale ◽  
Bleeding Time ◽  
Antithrombotic Activity ◽  
Ambulatory Patients ◽  
Patients At Risk ◽  
Set Up ◽  
Ischemic Events ◽  
Large Scale Clinical Trial ◽  
Selection Of

SummaryThe anti-aggregating activity of five rising doses of clopidogrel has been compared to that of ticlopidine in atherosclerotic patients. The aim of this study was to determine the dose of clopidogrel which should be tested in a large scale clinical trial of secondary prevention of ischemic events in patients suffering from vascular manifestations of atherosclerosis [CAPRIE (Clopidogrel vs Aspirin in Patients at Risk of Ischemic Events) trial]. A multicenter study involving 9 haematological laboratories and 29 clinical centers was set up. One hundred and fifty ambulatory patients were randomized into one of the seven following groups: clopidogrel at doses of 10, 25, 50,75 or 100 mg OD, ticlopidine 250 mg BID or placebo. ADP and collagen-induced platelet aggregation tests were performed before starting treatment and after 7 and 28 days. Bleeding time was performed on days 0 and 28. Patients were seen on days 0, 7 and 28 to check the clinical and biological tolerability of the treatment. Clopidogrel exerted a dose-related inhibition of ADP-induced platelet aggregation and bleeding time prolongation. In the presence of ADP (5 \lM) this inhibition ranged between 29% and 44% in comparison to pretreatment values. The bleeding times were prolonged by 1.5 to 1.7 times. These effects were non significantly different from those produced by ticlopidine. The clinical tolerability was good or fair in 97.5% of the patients. No haematological adverse events were recorded. These results allowed the selection of 75 mg once a day to evaluate and compare the antithrombotic activity of clopidogrel to that of aspirin in the CAPRIE trial.

Characterization of seawater reverse osmosis fouled membranes from large scale commercial desalination plant

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Reverse Osmosis ◽  
Large Scale ◽  
Retention Rate ◽  
Local Level ◽  
Microscopic Analysis ◽  
Transmembrane Pressure ◽  
Hydraulic Permeability ◽  
Seawater Reverse Osmosis ◽  
A Chain

The objective of this work is to study the ageing state of a used reverse osmosis (RO) membrane taken in Algeria from the Benisaf Water Company seawater desalination unit. The study consists of an autopsy procedure used to perform a chain of analyses on a membrane sheet. Wear of the membrane is characterized by a degradation of its performance due to a significant increase in hydraulic permeability (25%) and pressure drop as well as a decrease in salt retention (10% to 30%). In most cases the effects of ageing are little or poorly known at the local level and global measurements such as (flux, transmembrane pressure, permeate flow, retention rate, etc.) do not allow characterization. Therefore, a used RO (reverse osmosis) membrane was selected at the site to perform the membrane autopsy tests. These tests make it possible to analyze and identify the cause as well as to understand the links between performance degradation observed at the macroscopic scale and at the scale at which ageing takes place. External and internal visual observations allow seeing the state of degradation. Microscopic analysis of the used membranes surface shows the importance of fouling. In addition, quantification and identification analyses determine a high fouling rate in the used membrane whose foulants is of inorganic and organic nature. Moreover, the analyses proved the presence of a biofilm composed of protein.

MODELING THE SOUTH ATLANTIC OCEAN FROM MEDIUM TO HIGH RESOLUTION

2014 ◽  
Vol 31 (2) ◽  
Author(s):  
Mariela Gabioux ◽  
Vladimir Santos da Costa ◽  
Joao Marcos Azevedo Correia de Souza ◽  
Bruna Faria de Oliveira ◽  
Afonso De Moraes Paiva
Keyword(s):  
High Resolution ◽  
Atlantic Ocean ◽  
Large Scale ◽  
South Atlantic ◽  
Surface Relaxation ◽  
The South ◽  
Small Surface ◽  
Basic Model ◽  
Basic Set ◽  
Set Up

Results of the basic model configuration of the REMO project, a Brazilian approach towards operational oceanography, are discussed. This configuration consists basically of a high-resolution eddy-resolving, 1/12 degree model for the Metarea V, nested in a medium-resolution eddy-permitting, 1/4 degree model of the Atlantic Ocean. These simulations performed with HYCOM model, aim for: a) creating a basic set-up for implementation of assimilation techniques leading to ocean prediction; b) the development of hydrodynamics bases for environmental studies; c) providing boundary conditions for regional domains with increased resolution. The 1/4 degree simulation was able to simulate realistic equatorial and south Atlantic large scale circulation, both the wind-driven and the thermohaline components. The high resolution simulation was able to generate mesoscale and represent well the variability pattern within the Metarea V domain. The BC mean transport values were well represented in the southwestern region (between Vitória-Trinidade sea mount and 29S), in contrast to higher latitudes (higher than 30S) where it was slightly underestimated. Important issues for the simulation of the South Atlantic with high resolution are discussed, like the ideal place for boundaries, improvements in the bathymetric representation and the control of bias SST, by the introducing of a small surface relaxation. In order to make a preliminary assessment of the model behavior when submitted to data assimilation, the Cooper & Haines (1996) method was used to extrapolate SSH anomalies fields to deeper layers every 7 days, with encouraging results.

Bullying, School Violence, and Climate in Evolving Contexts

2018 ◽  
Author(s):  
Ron Avi Astor ◽  
Rami Benbenisthty
Keyword(s):  
School Violence ◽  
School Safety ◽  
Media Coverage ◽  
Large Scale ◽  
Ecological Model ◽  
Empirical Studies ◽  
Practical Applications ◽  
Teacher Student ◽  
Area Of Interest ◽  
New Research

Since 2005, the bullying, school violence, and school safety literatures have expanded dramatically in content, disciplines, and empirical studies. However, with this massive expansion of research, there is also a surprising lack of theoretical and empirical direction to guide efforts on how to advance our basic science and practical applications of this growing scientific area of interest. Parallel to this surge in interest, cultural norms, media coverage, and policies to address school safety and bullying have evolved at a remarkably quick pace over the past 13 years. For example, behaviors and populations that just a decade ago were not included in the school violence, bullying, and school safety discourse are now accepted areas of inquiry. These include, for instance, cyberbullying, sexting, social media shaming, teacher–student and student–teacher bullying, sexual harassment and assault, homicide, and suicide. Populations in schools not previously explored, such as lesbian, gay, bisexual, transgender, and queer students and educators and military- and veteran-connected students, become the foci of new research, policies, and programs. As a result, all US states and most industrialized countries now have a complex quilt of new school safety and bullying legislation and policies. Large-scale research and intervention funding programs are often linked to these policies. This book suggests an empirically driven unifying model that brings together these previously distinct literatures. This book presents an ecological model of school violence, bullying, and safety in evolving contexts that integrates all we have learned in the 13 years, and suggests ways to move forward.

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

Sign in / Sign up

Export Citation Format

Share Document