scholarly journals Adapting the Pour-through Medium Extraction Method to Phalaenopsis Grown in Sphagnum Moss

HortScience ◽  
2008 ◽  
Vol 43 (7) ◽  
pp. 2167-2170 ◽  
Author(s):  
Huan-Ying Yao ◽  
Ren-Shih Chung ◽  
Sheng-Bin Ho ◽  
Yao-Chien Alex Chang
Keyword(s):  
Electrical Conductivity ◽  
Extraction Method ◽  
Standard Procedure ◽  
Physical Characteristics ◽  
Sphagnum Moss ◽  
Distilled Water ◽  
The Press ◽  
Press Method ◽  
Highly Correlated ◽  
Set Up

Sphagnum moss, which has very different chemical and physical characteristics compared with other soilless media, is commonly used as a substrate to grow Phalaenopsis in countries such as Japan and Taiwan. Pour-through (PT) is a nondestructive, effective, and convenient medium extraction method developed for peat-based media. To know if PT can be applied to sphagnum moss and to set up a standard procedure, experiments were conducted to test the effects of volume and electrical conductivity (EC) of the displacing solution and the timing of leachate collection on leachate properties. Results demonstrated that applying distilled water with a volume less than 70 mL to 10.5-cm pots 1 h after fertigation did not influence leachate EC and pH. Applying displacing solution with EC between 0.001 and 0.93 dS·m−1 1 h after fertigation did not affect leachate EC or pH. Thus, in theory, a variety of solutions may be used for displacement. Leachate properties were found to remain consistent when collected between 20 and 160 min after fertigation. These results demonstrated that PT can be successfully used in Phalaenopsis cultivation with sphagnum moss. Furthermore, substrate EC obtained by PT extraction was highly correlated with that by the press method, confirming that PT is a feasible medium extraction method for sphagnum moss in Phalaenopsis cultivation.

scholarly journals Leachate Volume Effects on pH and Electrical Conductivity Measurements in Containers Obtained Using the Pour-through Method

2010 ◽  
Vol 20 (3) ◽  
pp. 608-611 ◽  
Author(s):  
Ariana P. Torres ◽  
Michael V. Mickelbart ◽  
Roberto G. Lopez
Keyword(s):  
Electrical Conductivity ◽  
Extraction Method ◽  
Distilled Water ◽  
Conductivity Measurements ◽  
Ph Values ◽  
Small Root ◽  
The Media ◽  
The Difference ◽  
Substrate Ph ◽  
Media Volume

Well-established protocols exist for using the pour-through extraction method to estimate substrate pH and electrical conductivity (EC) values for small root volumes. However, little work has been done to test the accuracy and consistency of these measurements in large containers. Our objective was to determine if the amount of distilled water applied to #1, #3, #5, and #10 (2-, 8-, 11-, and 27-L media volume, respectively) containers would affect leachate pH and EC values or consistency of measurements. Boxwood (Buxus ×koreana ‘Green Velvet’) was selected for this study because it is a common container-grown nursery crop. Distilled water was poured evenly over the media surface in each container 1 h after irrigation to obtain a leachate volume of either 50 mL or 2.5% of media volume and leachate EC and pH were measured. Media pH values were 0.1 to 0.3 points higher when 50 mL leachate was collected, but the difference was only significant during the first 2 weeks of measurements. There were no consistent differences in pH over container sizes or leachate volume. Leachate EC values were similar when measured in leachate collected as 50 mL total volume or 2.5% of media volume in 8- and 11-L containers. However, in 27-L containers, obtaining 50 mL leachate resulted in higher EC values than when 2.5% media volume was obtained. Both pH and EC values obtained from 50-mL leachate fractions over container sizes were more consistent than when 2.5% of the media volume was collected. Growers should collect 50 mL of leachate to test media pH and EC regardless of container size.

scholarly journals Development of the Press Extraction Method for Plug Substrate Analysis: Effects of Variable Extraction Force on pH, Electrical Conductivity, and Nutrient Analysis

2000 ◽  
Vol 10 (2) ◽  
pp. 367-369 ◽  
Author(s):  
Holly L. Scoggins ◽  
Paul V. Nelson ◽  
Douglas A. Bailey
Keyword(s):  
Electrical Conductivity ◽  
Extraction Method ◽  
Management Tool ◽  
State University ◽  
Solution Ph ◽  
Nutrient Analysis ◽  
North Carolina State University ◽  
The Press ◽  
Method Of Solution ◽  
Fertilizer Rates

Substrate solution testing is an essential management tool for greenhouse plug production. Current methods of plug solution extraction and testing can be confounded by subjective aspects of their techniques. The press extraction method (PEM) developed at North Carolina State University offers a convenient and timely method of solution extraction. The rooting substrate is brought to container capacity and after a period of one hour, pressing the plug surface with a finger or thumb is sufficient to expel the solution. This series of experiments serves to quantify possible variation that may occur in pH, Electrical conductivity (EC), and nutrient analysis from differing manual extraction forces. A modified press was designed to apply a range of force [53, 71, 89, 106, and 124 N (5.0, 6.7, 8.3, 10.0, and 11.6 lb/inch2)], and sampling protocol consistency was verified. For all three experiments, the range of extraction forces within a single fertilizer rate did not significantly affect solution pH or EC. When testing included a range of fertilizer rates, results were significantly different among the fertilizer rates, demonstrating the method's ability to detect changes in pH and EC resulting from increases in fertility levels. Nutrient analysis (NO3-, NH4+, P, K, Ca, Mg, Na, B, Cu, Fe, Mn, and Zn) of solution extracted from two different rooting substrates (peat-based and coir-based) showed no differences within substrates for the range of force treatments.

Epilogue

2017 ◽  
Author(s):  
Christopher Hilliard
Keyword(s):  
Borderline Personality Disorder ◽  
Personality Disorder ◽  
Borderline Personality ◽  
The Press ◽  
Set Up

The epilogue considers the mystery of Edith Swan and her wider significance. It begins by examining the press commentary on her and moves down into questions of motive and agency. After Swan’s conviction, newspapers were quick to diagnose her with a form of ‘sex mania’, applying the second-hand Freudianism that was becoming current in early 1920s Britain (one that assumed that repression led to outbursts of sexualized behaviour, rather than displacement into other areas). Yet Swan’s actions were at least as consistent with what is now known as borderline personality disorder. Many of Swan’s letters needled members of her own family about homely grievances. And while the letters accusing her of being promiscuous may have been fantasies of a sort, they also set up dramas in which she played the starring role.

scholarly journals Identification of Risk Factors for Lameness Detection with Help of Biosensors

Agriculture ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 610
Author(s):  
Ramūnas Antanaitis ◽  
Vida Juozaitienė ◽  
Gediminas Urbonavičius ◽  
Dovilė Malašauskienė ◽  
Mindaugas Televičius ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Milk Fat ◽  
Milk Protein ◽  
Standard Procedure ◽  
Clinical Signs ◽  
Experimental Period ◽  
Early Lactation ◽  
Protein Ratio ◽  
Walking Activity ◽  
Protein Milk

In this study we hypothesized that the lameness of early lactation dairy cows would have an impact on inline biomarkers, such as rumination time (RT), milk fat (%), milk protein (%), milk fat/protein ratio (F/P), milk lactose (L, %), milk electrical conductivity of all udder quarters, body weight (BW), temperature of reticulorumen content (TRR), pH of reticulorumen content (pH), and walking activity (activity). All 30 lame cows (LCs) used in this experiment had a score of 3–4, identified according to the standard procedure of Sprecher et al.. The 30 healthy cows (HC) showed a lameness score of one. RT, milk fat, MY, milk protein, F/P, L, milk electrical conductivity of all udder quarters, and BW were registered using Lely Astronaut® A3 milking robots each time the cow was being milked. The TRR, cow activity, and pH of the contents of each cow’s reticulorumen were registered using specific smaXtec boluses. The study lasted a total of 28 days. Days “−14” to “−1” denote the days of the experimental period before the onset of clinical signs of lameness (day “0”), and days “1” to “13” indicate the period after the start of treatment. We found that from the ninth day before the diagnosis of laminitis until the end of our study, LCs had higher milk electrical conductivity in all udder quarters, and higher milk fat to protein ratios. On the 3rd day before the onset of clinical signs of the disease until the day of diagnosis, the milk fat of the LC group was reduced. The activity of the LCs decreased sharply from the second day to the first day after treatment. RT in the HC group tended to decrease during the experiment. pH in LCs also increased on the day of the appearance of clinical signs.

EXTRACTION OF BORON FROM CSSC REFERENCE SOILS BY HOT WATER, DILUTE CaCl2 AND MANNITOL-CaCl2 SOLUTIONS

1986 ◽  
Vol 66 (2) ◽  
pp. 377-381 ◽  
Author(s):  
P. A. SCHUPPLI
Keyword(s):  
Key Words ◽  
Soil Samples ◽  
Water Soluble ◽  
Hot Water ◽  
Distilled Water ◽  
Background Color ◽  
Color Development ◽  
Reference Soil ◽  
Highly Correlated

Soils were extracted by hot water, dilute CaCl2, and by mannitol-CaCl2 solutions and boron was determined by either azomethine-H or the curcumin method. Results were strongly method dependent; in particular results by the simplest method, mannitol-CaCl2, were generally lower and not highly correlated (r = 0.64) with those by the recommended procedure. This procedure involves extraction with hot distilled H2O (2:1 solution:soil), centrifugation, filtration, color development with azomethine-H and correction for background color. Extractable boron values by this procedure ranged from 0.1 to 1.4 mg kg−1. Background color can be further reduced by the substitution of 0.02 M CaCl2 for distilled water. Key words: CSSC reference soil samples, hot-water-soluble boron

scholarly journals In vivo total body water assessment by total body electrical conductivity in rats suffering perturbations of water compartment equilibrium

1993 ◽  
Vol 70 (2) ◽  
pp. 433-438 ◽  
Author(s):  
N. Battistini ◽  
F. Virgili ◽  
G. Bedogni ◽  
G. R. Gambella ◽  
A. Bini
Keyword(s):  
Electrical Conductivity ◽  
Total Body Water ◽  
Body Water ◽  
Biliary Cirrhosis ◽  
Least Squares Regression ◽  
Water Compartment ◽  
Invasive Method ◽  
Total Body ◽  
Highly Correlated

Total body electrical conductivity (TOBEC) is a simple and non-invasive method for the assessment of body composition in vivo. Information regarding the applicability of TOBEC in the condition of abnormal fluid balance is scarce. In the present paper we give the results of the comparison between TOBEC and total body water (TBW; assessed by the tritium dilution technique) in three groups of animals: (1) healthy (n 17), (2) expanded fluid volume by secondary biliary cirrhosis (SBC; n 9) and (3) Fiirosemide®-treated rats (n 9). The TOBEC score and TBW by tritium dilution were found to be highly correlated in the pooled sample (r 0·90) and in normal (r 0.·87), SBC (r 0·73) and Furosemide-treated (r 0·89) rats. However, the relationship between TOBEC and TBW, described by least-squares regression analysis, was found to be similar for SBC and normal rats but was significantly different for Furosemide-treated and normal rats. These findings suggest that TOBEC is unable to track TBW accurately when the ratio between intracellular and extracellular water is chronically or acutely altered.

scholarly journals The Effect of Steam and Glycerol Pretreatment on Chemical Contents of Oil Palm Empty Fruit Bunch (EFB)

2018 ◽  
pp. 61-67
Author(s):  
Ornjira Choopakar ◽  
Chongchin Polprasert ◽  
Panagiotis Elefsiniotis ◽  
Supawadee Polprasert
Keyword(s):  
Reaction Time ◽  
Reaction Times ◽  
Steam Pretreatment ◽  
Chemical Components ◽  
Distilled Water ◽  
Waste Glycerol ◽  
Empty Fruit Bunches ◽  
Pretreatment Conditions ◽  
Set Up ◽  
Water Waste

This research aimed to evaluate the effect of the type of solvent, pH, substrate loading, and reaction time on the chemical components of palm empty fruit bunches (EFB). Steam pretreatment was set up at a temperature of 121 °C and pressure of 1.18 bar, using an autoclave with substrate loading of 5, 10, 15 and 20 % w/v at reaction times of 15 and 60 min. Distilled water, waste glycerol, alkaline glycerol and acidic glycerol were compared as solvents during steam pretreatment. The results showed that with distilled water, better pretreatment was achieved at 5 % and 10 % loading for 60 min. During the pretreatment with waste glycerol at 5 % loading an increase on the reaction time from 15 to 60 min reaction resulted in a remarkable increase in reducing sugar in the liquid phase. Overall, the best steam pretreatment conditions were observed using alkaline glycerol at 5 % w/v and 15 min reaction time, resulting in holocellulose (cellulose plus hemicellulose) increase to 87.98 % and a lignin decrease to 9.17 %. However, pretreatment with glycerol for 15 min was better than those for 60 min using either glycerol or distilled water. The results suggest that waste glycerol during steam pretreatment of EFB can be utilized effectively at short reaction times and at an increased pH to achieve a high output of cellulose and hemicellulose for sugar conversion in the bioethanol fermentation process.

scholarly journals Performance improvement of the heat recovery unit with sequential type heat pipes using TiO2 nanofluid

2019 ◽  
Vol 23 (3 Part B) ◽  
pp. 1755-1764 ◽  
Author(s):  
Ahmet Ozturk ◽  
Mehmet Ozalp ◽  
Adnan Sozen ◽  
Metin Guru
Keyword(s):  
Thermal Performance ◽  
Heat Recovery ◽  
Experimental Studies ◽  
Heat Pipes ◽  
Outer Diameter ◽  
Distilled Water ◽  
Condenser Section ◽  
Recovery System ◽  
Heat Recovery System ◽  
Set Up

This paper deals with the improvement of thermal performance of the heat recovery system in air-to-air unit by using a nanofluid of TiO particles and distilled water. The 2 experimental set-up equipped with 15 copper pipes of a 1000 mm length, 10.5 mm inner diameter, and 12 mm outer diameter was used. The evaporator section consists of 450 mm of heat pipes, the condenser section is 400 mm, and the adiabatic section is 150 mm. In experimental studies, 33% of the evaporator volumes of heat pipes were filled with working fluids. Experiments were carried out at temperatures between 25?C and 90?C by using five different cooling air-flows (40, 42, 45, 61, and 84 g/s), and two different heating powers (3 kW and 6 kW) for the evaporation section, to determine heat removed from the condensation section. Trials were performed for distilled water and nanofluid respectively, and the results were compared with each other. Results revealed that a 50% recovery in the thermal performance of the heat pipe heat recovery system was achieved in the design using TiO nanofluid as the working liquid, at a heating power of 3 kW, air 2 velocity of 2.03 m/s and air-flow of 84 g/s.

Corruption and the Public Service Ethos in Mid-Victorian Administration: The Case of Leonard Horner and the Factory Office*

2020 ◽  
Vol 135 (575) ◽  
pp. 860-891
Author(s):  
Ian Cawood
Keyword(s):  
Public Opinion ◽  
Public Service ◽  
Public Support ◽  
Political Corruption ◽  
The Public ◽  
Victorian Britain ◽  
The Press ◽  
The Government ◽  
Set Up ◽  
Changing Attitudes

Abstract While the problem of political corruption in mid-nineteenth century Britain has been much studied, the experience of corrupt behaviour in public bodies, both new and long established, is comparatively neglected. This article takes the example of one of the first inspectorates set up after the Great Reform Act, the Factory Office, to examine the extent of corrupt practices in the British civic state and the means whereby it was addressed. It examines the changing processes of appointment, discipline and promotion, the issues of remuneration and venality, and the relationships between inspectors, workers, factory owners, the government and the wider civil service, and the press and public opinion. The article argues that the changing attitudes of the inspectors, especially those of Leonard Horner, were indicative of a developing ‘public service ethos’ in both bureaucratic and cultural settings and that the work of such unsung administrators was one of the agencies through which corrupt behaviour in the civic structures of Victorian Britain was, with public support, challenged. The article concludes that the endogenous reform of bureaucratic practice achieved by the factory inspectorate may even be of equal significance as that which resulted from the celebrated Northcote–Trevelyan Report of 1854.

Sign in / Sign up

Export Citation Format

Share Document