scholarly journals Quality Determination of Red Radish by Nondestructive Root Color Measurement

2003 ◽  
Vol 128 (3) ◽  
pp. 397-402 ◽  
Author(s):  
Monika Schreiner ◽  
Angelika Krumbein ◽  
Ilona Schonhof ◽  
Stefanie Widell ◽  
Susanne Huyskens-Keil
Keyword(s):  
Quality Assessment ◽  
Raphanus Sativus ◽  
Reliable Indicator ◽  
Color Measurement ◽  
New Approach ◽  
Textural Characteristics ◽  
Hue Angle ◽  
Nondestructive Quality ◽  
Red Radish

A new approach for nondestructive quality assessment based on color measurement was developed for red radishes (Raphanus sativus L.). Postharvest changes in hue angle corresponded with changes in soluble and insoluble pectic substances linked to textural characteristics in `Nevadar' radishes. Changes in glucosinolates were related to changes in chroma and were associated with radish flavor. However, monosaccharides were not related to root color during the 4 days of postharvest period. Nevertheless, the data suggest that root color may be used as a rapid, inexpensive and reliable indicator of quality during the postharvest distribution of radish.

The Dudley Lee Case: A new approach to factual causation and its implications for transformative jurisprudence

2017 ◽  
Vol 30 (1) ◽  
pp. 273-289
Author(s):  
Anmari Meerkotter
Keyword(s):  
Case Note ◽  
Constitutional Court ◽  
Recent Contribution ◽  
New Approach ◽  
State Accountability ◽  
The Law ◽  
Transformative Impact ◽  
Constitutional Jurisprudence ◽  
Law Of Delict

The Constitutional Court (CC) judgment of Lee v Minister of Correction Services 2013 2SA 144 (CC) is a recent contribution to transformative constitutional jurisprudence in the field of the law of delict. This matter turned on the issue of factual causation in the context of wrongful and negligent systemic omissions by the state. In this case note, I explore the law relating to this element of delictual liability with specific regard to the traditional test for factual causation – the conditio sine qua non (‘but-for’) test. In particular, I note the problems occasioned by formalistic adherence to this test in the context of systemic state omissions as evidenced by the SCA judgment in the same matter. I also consider the manner in which English courts have addressed this problem. Thereafter, I analyse the CC’s broader approach to the determination of factual causation as one based on common sense and justice. I argue that this approach endorses a break from a formalistic application of the test and constitutes a step towards an approach which resonates with the foundational constitutional values of freedom, dignity and equality. Furthermore, it presents an appropriate solution to the problems associated with factual causation where systemic omissions are concerned. I then consider the transformative impact of the Lee judgment. In particular, I argue that the broader enquiry favoured by the CC facilitates the realisation of constitutionally guaranteed state accountability, and amounts to an extension of the existing norm of accountability jurisprudence. Hence, I contend that the judgment presents a further effort by the Constitutional Court to effect wholesale the constitutionalisation of the law of delict, as well as a vindicatory tool to be used by litigants who have been adversely affected by systemic state omissions.

Automatic Determination of Optimal FIB Operations for Improved Circuit Probing and Fast Reconfiguration

2000 ◽  
Author(s):  
Romain Desplats ◽  
Timothee Dargnies ◽  
Jean-Christophe Courrege ◽  
Philippe Perdu ◽  
Jean-Louis Noullet
Keyword(s):  
Integrated Circuit ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Semiconductor Devices ◽  
Front Side ◽  
Automatic Determination ◽  
Metal Line ◽  
New Approach ◽  
Metal Layers

Abstract Focused Ion Beam (FIB) tools are widely used for Integrated Circuit (IC) debug and repair. With the increasing density of recent semiconductor devices, FIB operations are increasingly challenged, requiring access through 4 or more metal layers to reach a metal line of interest. In some cases, accessibility from the front side, through these metal layers, is so limited that backside FIB operations appear to be the most appropriate approach. The questions to be resolved before starting frontside or backside FIB operations on a device are: 1. Is it do-able, are the metal lines accessible? 2. What is the optimal positioning (e.g. accessing a metal 2 line is much faster and easier than digging down to a metal 6 line)? (for the backside) 3. What risk, time and cost are involved in FIB operations? In this paper, we will present a new approach, which allows the FIB user or designer to calculate the optimal FIB operation for debug and IC repair. It automatically selects the fastest and easiest milling and deposition FIB operations.

The Development of a Turbidimetric Method for the Quantitative Determination of Antibiotics of the Aminoglycoside Group in Medications

2020 ◽  
Vol 65 (7-8) ◽  
pp. 37-41
Author(s):  
E. N. Semenova ◽  
S. I. Kuleshova ◽  
E. I. Sakanyan
Keyword(s):  
Quantitative Determination ◽  
Quality Assessment ◽  
Aminoglycoside Antibiotics ◽  
Metrological Characteristics ◽  
Streptomycin Sulfate ◽  
Turbidimetric Method ◽  
Validation Criteria ◽  
Validation Parameters ◽  
Validation Tests

A method for the quantitative determination of streptomycin sulfate in medicines by the turbidimetric method has been developedand validated. Based on the results of the experiments, it was found that the metrological characteristics of such validation parameters of the method as linearity, precision, and correctness do not exceed the validation criteria. Linearity was noted in the range of streptomycin concentrations from 3.75 to 8.43 μg/ml. The results of validation tests of the method for the quantitative determination of streptomycin indicate the prospects and feasibility of introducing the turbidimetric method into the domestic system for standardization and quality assessment of aminoglycoside antibiotics.

scholarly journals New Method for Analysis of the Temporomandibular Joint Using Cone Beam Computed Tomography

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cross Section ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Section Plane ◽  
New Approach ◽  
Volume Of Interest ◽  
Gap Width

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.

scholarly journals Development of Molecular Markers for Predicting Radish (Raphanus sativus) Flesh Color Based on Polymorphisms in the RsTT8 Gene

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1386
Author(s):  
Soyun Kim ◽  
Keunho Yun ◽  
Han Yong Park ◽  
Ju Young Ahn ◽  
Ju Yeon Yang ◽  
...  
Keyword(s):  
Molecular Markers ◽  
Raphanus Sativus ◽  
Nucleotide Polymorphisms ◽  
Single Nucleotide ◽  
Cosmetic Industry ◽  
Natural Colorants ◽  
Health Promoting ◽  
Primer Sets ◽  
Red Radish ◽  
Simple Sequence

Red radish (Raphanus sativus L.) cultivars are a rich source of health-promoting anthocyanins and are considered a potential source of natural colorants used in the cosmetic industry. However, the development of red radish cultivars via conventional breeding is very difficult, given the unusual inheritance of the anthocyanin accumulation trait in radishes. Therefore, molecular markers linked with radish color are needed to facilitate radish breeding. Here, we characterized the RsTT8 gene isolated from four radish genotypes with different skin and flesh colors. Sequence analysis of RsTT8 revealed a large number of polymorphisms, including insertion/deletions (InDels), single nucleotide polymorphisms (SNPs), and simple sequence repeats (SSRs), between the red-fleshed and white-fleshed radish cultivars. To develop molecular markers on the basis of these polymorphisms for discriminating between radish genotypes with different colored flesh tissues, we designed four primer sets specific to the RsTT8 promoter, InDel, SSR, and WD40/acidic domain (WD/AD), and tested these primers on a diverse collection of radish lines. Except for the SSR-specific primer set, all primer sets successfully discriminated between red-fleshed and white-fleshed radish lines. Thus, we developed three molecular markers that can be efficiently used for breeding red-fleshed radish cultivars.

scholarly journals External Quality Assessment for the Determination of Diphtheria Antitoxin in Human Serum

2010 ◽  
Vol 17 (8) ◽  
pp. 1282-1290 ◽  
Author(s):  
Paolo Di Giovine ◽  
Antonella Pinto ◽  
Rose-Marie Ölander ◽  
Dorothea Sesardic ◽  
Paul Stickings ◽  
...  
Keyword(s):  
Quality Assessment ◽  
External Quality Assessment ◽  
Accurate Determination ◽  
Enzyme Linked Immunosorbent Assay ◽  
Reference Laboratory ◽  
Routine Method ◽  
External Quality ◽  
Passive Hemagglutination

ABSTRACT Accurate determination of diphtheria toxin antibodies is of value in determining the rates of immunity within broad populations or the immune status of individuals who may be at risk of infection, by assessing responses to vaccination and immunization schedule efficacy. Here we report the results of an external quality assessment (EQA) study for diphtheria serology, performed within the dedicated surveillance network DIPNET. Twelve national laboratories from 11 European countries participated by testing a standard panel of 150 sera using their current routine method: Vero cell neutralization test (NT), double-antigen enzyme-linked immunosorbent assay (ELISA; DAE), dual double-antigen time-resolved fluorescence immunoassay (dDA-DELFIA), passive hemagglutination assay (PHA), toxin binding inhibition assay (ToBI), and in-house or commercial ELISAs. The objective of the study was not to identify the best assay, as the advantages and drawbacks of methods used were known, but to verify if laboratories using their routine method would have categorized (as negative, equivocal, or positive) a serum sample in the same way. The performance of each laboratory was determined by comparing its results on a quantitative and qualitative basis to NT results from a single reference laboratory, as this test is considered the in vitro “gold standard.” The performance of laboratories using NT was generally very good, while the laboratories’ performance using other in vitro methods was variable. Laboratories using ELISA and PHA performed less well than those using DAE, dDA-DELFIA, or ToBI. EQA is important for both laboratories that use in vitro nonstandardized methods and those that use commercial ELISA kits.

Sign in / Sign up

Export Citation Format

Share Document