scholarly journals TECHNOLOGICAL PROPERTIES OF FLOUR AND THEIR EFFECT ON QUALITY INDICATORS OF SUGAR COOKIES

Food systems ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 13-19
Author(s):  
T. V. Savenkova ◽  
E. A. Soldatova ◽  
S. Yu. Misteneva ◽  
M. A. Taleysnik

The main recipe component of most types of flour confectionery is wheat flour, the technological properties of which largely effect not only the quality indicators of the finished product, but also the stability of the technological flow of its production. However, today, in Russia there are no specialized requirements for the quality of wheat flour for confectionery, in contrast to the requirements for the baking wheat flour. The article lists the main problems and features of the quality of Russian wheat flour consisting in the absence of target classifications of grain and a decrease in its qualitative potential, in particular, a decrease in the amount of gluten and improvement of its quality. As part of the work, the influence of the technological properties of wheat flour on the rheological parameters of the dough and the quality of sugar cookies, which are traditionally in high demand of population groups of every age, was studied, while the share of domestic products is more than 85%. The work was performed in the laboratory of flour confectionery products of All-Russian Scientific Research Institute of Confectionery Industry. The determination of organoleptic, physical and chemical, structural and mechanical indicators of raw materials, semi-finished products and finished products was carried out by standard methods.

Author(s):  
Е.Е. Ульянченко

Исследовано влияние приема прорезания средней жилки листа на качественные показатели табачного сырья. Исследования проводили на крупнолистных скелетных сортах табака Вирджиния 202, Юбилейный новый 142, Трапезонд 92. Прорезание жилки осуществляли дисковым прорезателем на инновационном оборудовании – линии подготовки листьев табака к сушке. Сушили листья с прорезанной жилкой и без прорезания в вертикальных гирляндах под навесом естественным способом. Качество табачного сырья определяли по товарным сортам и технологическим свойствам, фракционному составу резаного табака; контролировали уровень значений никотина. Контроль показателей осуществляли по методикам лабораторного контроля ВНИИТТИ (Краснодар). Применение приема прорезания средней жилки на крупнолистных сортах табака выявило положительный технологический результат. Интенсивность сушки увеличилась, сорт: Вирджиния 202 – в 1,54 раза; Юбилейный новый 142 – в 1,93 раза; Трапезонд 92 – в 1,78 раза. Срок сушки сортов составил 13–14 сут. Сырье с прорезанной жилкой незначительно – до 5–7% снизило товарную сортность. Прорезание жилки не ухудшило технологических свойств сырья: выход волокна в целом увеличился на 5% в сравнении с сырьем с не прорезанной жилкой. Объем волокна у сорта Юбилейный новый 142 составил 92,96%, сорт показал хорошую скорость влагоотдачи и наибольшую эффективность применения приема прорезания средней жилки. Прием прорезания средней жилки листа предотвратил снижение уровня значений никотина в процессе сушки у сортов Вирджиния 202 и Трапезонд 92 на 35 и 15% соответственно за счет сокращения сроков сушки. Уровень никотина в листьях табака сорта Юбилейный Новый 142 понизился на 8%. Установлено, что прием прорезания средней жилки эффективен на крупнолистных сортах табака с массивной жилкой, он интенсифицирует сушку, не ухудшает основных показателей качества, сохраняет уровень никотина в табаке и рекомендован для применения в производстве табачного сырья. The influence of the method of cutting the middle vein of the leaf on the quality indicators of tobacco raw materials is studied. Studies were conducted on large-leaved skeletal tobacco varieties Virginia202, Yubileyny Novy 142, Trapezond 92. The vein was cut with a disk cutter using innovative equipment – a line for preparing tobacco leaves for drying. Dried leaves with a cut vein and without cutting in vertical garlands under a canopy in a natural way. The quality of tobacco raw materials was determined by commodity grades and technological properties, fractional composition of cut tobacco; the level of nicotine values was controlled. Monitoring of indicators was carried out according to the methods of laboratory control of All-Russian scientific research institute of tobacco, makhorka and tobacco products (Krasnodar). The use of the method of cutting the middle vein on large-leaf tobacco varieties revealed a positive technological result. The intensity of drying increased, the variety: Virginia 202 – 1,54 times; Yubileyny Novy 142 – 1,93 times; Trapezond 92 – 1,78 times. The drying period of the varieties was 13–14 days. Raw materials with a cut-through vein slightly reduced the commodity grade to 5–7%. The cutting of the vein did not impair the technological properties of the raw material: the yield of the fiber as a whole increased by 5% in comparison with raw materials with a non-cut vein. The volume of fiber in the Yubileyny Novy 142 variety was 92,96%, the variety showed a good rate of moisture loss and the highest efficiency of using the method of cutting the middle vein. The method of cutting through the middle vein of the leaf prevented a decrease in the level of nicotine values in the process of sushi in the varieties Virginia 202 and Trapezond 92 by 35 and 15%, respectively, due to a reduction in the drying time. The level of nicotine in tobacco leaves of the Yubileyny Novy 142 variety decreased by 8%. It was found that the method of cutting the middle vein is effective on large-leaf varieties with a massive vein tobacco leaves, it intensifies drying, does not worsen the main quality indicators, preserves the level of nicotine in tobacco and is recommended for use in the production of tobacco raw materials.


Author(s):  
А.К. СТРЕЛКОВА ◽  
И.Б. КРАСИНА ◽  
К.Н. СТОРЧЕУС ◽  
Е.В. ФИЛИППОВА

Необходимость разработки безглютеновых продуктов обусловлена ростом численности людей страдающих целиакией, распространенность которой составляет 1 случай на 100–200 человек населения. Решение проблем, возникающих при производстве безглютеновых мучных кондитерских изделий, делает актуальным поиск новых видов сырья, не содержащего глютен и способного улучшать потребительские свойства изделий. В качестве источника безглютенового сырья была выбрана гречневая мука (ГМ). Получено безглютеновое печенье из ГМ в сочетании с различными гидроколлоидами – камедями акации, трагаканта, гуаровой и ксантановой, которые по отдельности добавляли в образцы ГМ в количестве 1г/100 г, и исследовано его физико-химические и сенсорные свойства в сравнении с аналогичными свойствами печенья из пшеничной муки (ПМ). Установлено, что образцы ГМ с добавкой камедей имеют более высокое содержание влаги, а печенье, полученное из смеси ГМ с камедью по разработанной нами технологии, – большую толщину, массу и сниженную прочность при разрушении по сравнению с ГМ и печеньем, изготовленным из нее. При сенсорной оценке качества изделий, проведенной по девятибалльной гедонистической шкале, установлено, что самые высокие показатели качества имеет печенье из ПМ, самые низкие – печенье, приготовленное из ГМ. Внесение камедей улучшило сенсорные показатели изделий на основе ГМ. Лучшим признан образец печенья на основе ГМ с добавлением ксантановой камеди. Таким образом, использование гидроколлоидов улучшает водосвязывающую способность муки и сенсорные показатели изделия – цвет, аромат, вкус и дает возможность получить безглютеновое печенье достаточно высокого качества, сопоставимого с качеством печенья из пшеничной муки. The need to develop gluten-free products is due to the growing number of people suffering from celiac disease, the prevalence of which is 1 case per 100–200 people of the population. Solving the problems that arise in the production of gluten-free flour confectionery products makes it relevant to search for new types of raw materials that do not contain gluten and can improve the consumer properties of products. Buckwheat flour (BF) was chosen as a source of gluten-free raw materials. Gluten-free cookies from BF were obtained in combination with various hydrocolloids-acacia, tragacanth, guar and xanthan gums, which were separately added to BF samples in the amount of 1 g/100 g, and its physical and chemical and sensory properties were studied in comparison with similar properties of wheat flour cookies (WF). The purpose of this work is to obtain gluten-free cookies from BF in combination with various hydrocolloids – acacia gum, tragacanth, guar gum and xanthan gum, which were separately added to BF in the amount of 1 g/100 g, and to study its physical, chemical and sensory properties in comparison with similar properties of cookies from WF. It was found that the samples of BF with the addition of gums have higher moisture content, and the cookies obtained from a mixture of BF with gum according to the technology developed by us – a greater thickness, weight and reduced strength at destruction compared to BF and cookies made from it. In the sensory evaluation of the quality of products conducted on a nine-point hedonistic scale, it was found that the highest quality indicators are cookies made from WF, the lowest – cookies made from BF. The introduction of gums improved the sensory performance of BF-based products. A sample of BF-based cookies with the addition of xanthan gum was recognized as the best. Thus, the use of hydrocolloids improves the water-binding ability of flour and the sensory characteristics of the product – color, aroma, taste, and makes it possible to obtain gluten-free cookies of sufficiently high quality, comparable to the quality of cookies made from wheat flour.


2021 ◽  
Vol 14 (2(52)) ◽  
pp. 46-59
Author(s):  
Ksеnia Nikolaevna Gershonchik ◽  
Valentina Nikolaevna Babodey ◽  
Tatsiana Vyacheslavovna Shugaeva ◽  
Svetlana Nikolaevna Vislouhova ◽  
Svetlana Evgenievna Tomashevich

The article presents the main results of fundamental research carried out by specialists of the group for the confectionery industry of the technology confectionery and oil and fat products department in 2008–2020. The chemical composition and technological properties of soluble fibers — inulin and oligofructose, as well as the source of inulin — Jerusalem artichoke, have been studied, their optimal dosages in the manufacture of zephyr have been determined, allowing to achieve technological effects and enrich the finished product with food fibers. Studied the composition of the linen cake and its influence on the quality of biscuits. The optimal dosages of linen cake have been established to increase the nutritional and biological value of the biscuits. The possibility of using durum wheat flour in the manufacture of biscuits has been studied. Influence of proteolytic enzyme, sugar and fat on protein proteolysis in confectionary dough for production of soluble biscuits is studied. It is defined that sugar and fat reduce speed of protein proteolysis, at that sugar has more inactivate ability. Optimal quantity of proteolytic enzyme is 0,15 % to mass of wheat flour. The rheological properties of syrups based on sweeteners for muesli bars have been investigated. Established the ratio of maltitol and maltitol syrup in the recipe for muesli bars for diabetic nutrition.


2021 ◽  
Vol 6 (11 (114)) ◽  
pp. 84-89
Author(s):  
Sultan Sabraly ◽  
Irina Glotova ◽  
Sergey Shakhov ◽  
Alla Kutsova ◽  
Sholpan Abzhanova

Ways to ensure the quality and safety of meat processing products are being devised at an intensive pace. To solve these tasks, various "barriers" are used: chemical, physical, microbiological, as well as their combinations. When performing this research, a critical analysis of existing "barriers" as techniques to stabilize the quality of meat products with long shelf life was carried out. It has been revealed that the main preferences of consumers are associated with natural additives that ensure the safety of products. The introduction of modern barrier technologies is a relevant issue as it could ensure the stability of quality indicators during storage. An important task is to use natural raw materials as barriers. To this end, an analysis of the antioxidant activity of extracts from various plant-based raw materials was carried out. The results make it possible to devise technologies for creating film coatings with bioprotective properties. The dynamics of changes in the microbiological contamination of large-piece semi-finished products from beef in the process of storage at different temperatures were studied. It was found that the use of film barrier coatings leads to a restraining of the growth of microflora and has a bacteriostatic effect, which helps extend the shelf life of semi-finished products compared to control samples. The implementation of this study's results could significantly prolong the shelf life of meat semi-finished products, including at positive temperatures, without the risk of microbiological spoilage and loss of quality and functional-technological characteristics.


2019 ◽  
pp. 3-8
Author(s):  
N.Yu. Bobrovskaya ◽  
M.F. Danilov

The criteria of the coordinate measurements quality at pilot-experimental production based on contemporary methods of quality management system and traditional methods of the measurements quality in Metrology are considered. As an additional criterion for quality of measurements, their duration is proposed. Analyzing the problem of assessing the quality of measurements, the authors pay particular attention to the role of technological heredity in the analysis of the sources of uncertainty of coordinate measurements, including not only the process of manufacturing the part, but all stages of the development of design and technological documentation. Along with such criteria as the degree of confidence in the results of measurements; the accuracy, convergence, reproducibility and speed of the results must take into account the correctness of technical specification, and such characteristics of the shape of the geometric elements to be controlled, such as flatness, roundness, cylindrical. It is noted that one of the main methods to reduce the uncertainty of coordinate measurements is to reduce the uncertainty in the initial data and measurement conditions, as well as to increase the stability of the tasks due to the reasonable choice of the basic geometric elements (measuring bases) of the part. A prerequisite for obtaining reliable quality indicators is a quantitative assessment of the conditions and organization of the measurement process. To plan and normalize the time of measurements, the authors propose to use analytical formulas, on the basis of which it is possible to perform quantitative analysis and optimization of quality indicators, including the speed of measurements.


2020 ◽  
Vol 29 (12) ◽  
pp. 52-58
Author(s):  
E.P. Meleshkina ◽  
◽  
S.N. Kolomiets ◽  
A.S. Cheskidova ◽  
◽  
...  

Objectively and reliably determined indicators of rheological properties of the dough were identified using the alveograph device to create a system of classifications of wheat and flour from it for the intended purpose in the future. The analysis of the relationship of standardized quality indicators, as well as newly developed indicators for identifying them, differentiating the quality of wheat flour for the intended purpose, i.e. for finished products. To do this, we use mathematical statistics methods.


Author(s):  
Е.Е. Ульянченко

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.


2021 ◽  
pp. 104-113
Author(s):  
O. P. Deryugina ◽  
E. A. Trapeznikov

The article discusses the issue of industrial compounding, which improves the quality of the raw materials supplied to the main pipelines. Compounding from "to compound" (English) - to mix. When mixing different types of oil obtained, "incompatibility" is possible, which is expressed in the precipitation of a solid sediment and violation of the stability of the colloidal system and due to the differing properties of oils. Attention to this problem is due to the tightening of requirements for the quality of raw materials that must comply with modern standards. The article discusses the causes of the problem of "incompatibility" of oil during compounding and effective ways of solving it, substantiates the need for a preliminary study of the properties of mixed oil in order to identify possible incompatibility of various types of oil. The standard tests for determination of incompatibility indices characterizing the ability of raw materials to mix are considered. The article substantiates the need to develop methods for diagnosing the incompatibility of oils as the most important task of modern chemical science, the solution of which will improve the quality of the raw material obtained and solve many technological problems in the compounding process.


Author(s):  
Ю.Н. НИКОНОВИЧ ◽  
Н.А. ТАРАСЕНКО

Исследовано влияние гидратированных пшеничных волокон Камецель FW 200 и апельсиновых волокон Citri-Fi 200, внесенных в тесто взамен части кондитерского жира для повышения пищевой и биологической ценности продукта, на свойства мягких вафель. Готовили образцы вафельного теста: контрольный – тесто без добавок, образцы теста с заменой 10, 15 и 20% кондитерского жира на пшеничные волокна Камецель FW 200, образцы теста с заменой 10, 15 и 20% кондитерского жира на апельсиновые волокна Citri-Fi 200 – и определяли технологические свойства изготовленных образцов теста – влажность, плотность и количество оттеков вафельного листа. Установлено, что внесение пищевых волокон Citri-Fi 200 в исследованных дозировках 10, 15 и 20% от массы жира в рецептуру вафельного теста увеличивает количество оттеков выше допустимого уровня, т. е. увеличивает потери сырья. Оптимальные качественные показатели имеет образец вафельного теста с добавкой 15% гидратированных пищевых волокон Камецель FW 200, внесение которых позволит увеличить пищевую ценность кондитерского изделия. The influence of hydrated wheat fibers Kametsel FW 200 and orange fibers Citri-Fi 200, introduced into the dough instead of the confectionery fat to improve the nutritional and biological value of the product on the properties of soft waffles was investigated. Wafer dough samples: control - dough without additives, dough samples with replacement of 10, 15 and 20% confectionery fat by wheat fibers Kametsel FW 200, dough samples with replacement of 10, 15 and 20% confectionery fat by orange fibers Citri-Fi 200 – prepared and determined their technological properties – humidity, density and the number of flows of the wafer sheet. It is established that the introduction of Citri-Fi 200 dietary fibers in the studied dosages of 10, 15 and 20% by weight of fat in the formulation of wafer dough increases the number of flows the dough above the permissible level, i.e. increases the loss of raw materials. A sample of wafer dough with the addition of 15% hydrated dietary fiber Kametsel FW 200 has optimal quality indicators.


Author(s):  
Е.Е. УЛЬЯНЧЕНКО

При производстве табачного сырья важную роль играет сокращение продолжительности сушки табачных листьев. Одним из способов интенсификации сушки свежеубранных табачных листьев является прием прорезания средней жилки (ПСЖ) листьев вдоль волокон. По результатам исследований 2019–2020 гг. была создана база данных табачного сырья, полученного при естественном способе сушки с применением приема ПСЖ, которая может служить информационным материалом для производителей табака. Проведена оптимизация процесса сушки табачного листа ПСЖ по показателям качества табачного сырья для расширенного диапазона сортотипов табака. Объектом исследований были сорта отечественной селекции, включенные в Государственный реестр селекционных достижений, допущенные к использованию: Самсун 85, Вирджиния 202, Юбилейный новый 142, Трапезонд 92, Трапезонд 204, Дюбек 33, Американ 287 и Крупнолистный Ильский (находится в стадии государственных испытаний). Критерием оценки эффективности применения приема ПСЖ на исследованных сортах табака являлся совокупный сравнительный анализ следующих показателей контрольных (без ПСЖ листа) и опытных образцов: уровень интенсификации сушки, показатели товарного качества, технологических свойств и химического состава полученного сырья. Установлено, что ПСЖ позволяет интенсифицировать процесс сушки в 1,3–2,46 раза в зависимости от сорта табака и положительно влияет на технологические свойства сырья, у большинства сортов увеличивается выход волокна и сохраняются объемно-упругие свойства. Динамика сушки оказывает влияние на изменение химического состава сырья. В процессе сушки за счет гидролизации солей никотина и его освобождения путем окисления кислородом воздуха уровень никотина в ряде образцов снижается в пределах 10–30%. Чем выше содержание никотина, тем выше крепость табака, грубее его вкус. Изменения углеводно-белкового соотношения в сторону повышения углеводов улучшают вкусовые характеристики сырья. По каждому исследованному сорту не удалось выявить закономерной зависимости его структуры и характера процесса сушки при ПСЖ с преобразованиями химического состава сырья. На основе анализа технологических и качественных показателей табачного сырья, представленных в разработанной базе данных по интенсификации сушки различных сортов табака с применением приема ПСЖ табачных листьев, можно планировать выбор оптимального способа сушки для каждого сорта табака, позволяющего повысить эффективность использования сырья и улучшить его качественные характеристики. In the production of tobacco raw materials, reducing the drying time of tobacco leaves plays an important role. One of the ways to intensify the drying of freshly harvested tobacco leaves is the method of cutting the middle vein (CMV) of the leaves along the fibers. Based on the results of research in 2019–2020, a database of tobacco raw materials obtained by a natural drying method using CMV reception was created, which can serve as information material for tobacco producers. The optimization of the process of drying the CMV tobacco leaf according to the quality indicators of tobacco raw materials for an expanded range of tobacco variety types was carried out. The object of research was the varieties of domestic selection included in the State Register of Breeding Achievements, approved for use: Samsun 85, Virginia 202, Yubileyny novy 142, Trapezond 92, Trapezond 204, Dubek 33, American 287 and Krupnolistnyy Ilskiy (under state testing). The criterion for evaluating the effectiveness of the use of CMV intake on the studied tobacco varieties was a cumulative comparative analysis of the following indicators of control (without CMV sheet) and experimental samples: the level of drying intensification, indicators of commercial quality, technological properties and chemical composition of the obtained raw materials. It is established that CMV allows to intensify the drying process by 1,3–2,46 times, depending on the tobacco variety and has a positive effect on the technological properties of raw materials, most varieties increase the yield of fiber and retain volume-elastic properties. The dynamics of drying affects the change in the chemical composition of raw materials. During the drying process, due to the hydrolysis of nicotine salts and its release by oxidation with air oxygen, the nicotine level in a number of samples decreases within 10–30%. The higher the nicotine content, the higher the strength of tobacco, it is coarser in taste. Changes in the carbohydrate-protein ratio in the direction of increasing carbohydrates improve the taste characteristics of raw materials. For each studied variety, it was not possible to identify a regular dependence of its structure and the nature of the drying process at CMV with transformations of the chemical composition of raw materials. Based on the analysis of technological and qualitative indicators of tobacco raw materials presented in the developed database on the intensification of drying of various varieties of tobacco using the use of CMV of tobacco leaves, it is possible to plan the choice of the optimal drying method for each variety of tobacco, which allows to increase the efficiency of using raw materials and improve its quality characteristics.


Sign in / Sign up

Export Citation Format

Share Document