Evaluation of the mechanical resistance of rheophores of the means of initiation for explosive’s materials, on the basis of the resistance to abrasion determined with the OPVA 10 specialized equipment

The scientific paper presents the synthesis of research results undertaken to develop the technical and methodological infrastructure for assessing the safety of means of initiating explosives, on the abrasion resistance of rheophores of electric detonators, in order to increase the safety of their use. The state-of-the-art OPVA 10 equipment is used to test the ability of rheophores insulation to withstand the abrasion forces that may occur during normal use. This equipment with a programmable automatic ensures the testing of the rheophores of the electric detonating staples to determine the abrasion resistance under the operating conditions provided by the harmonized European standard EN 13763-4 and the technical specification of the manufacturer, the operating temperature of this equipment being between 10 ÷ 30 °C ensuring at the highest level the fulfillment of the technical requirements imposed by the European and international regulations in the field.

Multi-HAPS Network Implementation within 3GPP’s NTN framework for 5G and beyond

High Altitude Platform Station (HAPS) is part of the 3GPP defined non-terrestrial network (NTN) infrastructure for 5G networks. Various technical studies by 3GPP have addressed NTN-based implementations and have significantly studied satellite-based scenarios. However, the study does not sufficiently address HAPS or multi-HAPS based scenarios specifically. Though HAPS, is captured under Unmanned Aerial Systems (UAS), it has unique operational realities that set it apart from other NTN platforms. For instance, HAPS come in different variants of fixed-wing, balloons and airships. This paper highlights the need for expanded studies specifically aimed at HAPS for more seamless integration. The work also analyses the Doppler effect associated with fixed-wing HAPS systems to further demonstrate how operational scenarios may differ for these platforms and the need for targeted studies. HAPS is expected to contribute significantly to the NTN-based implementations and may require more specialised considerations within the 3GPP NTN technical specification process, especially for 5G and beyond 5G (B5G) networks.

Structural and parametric synthesis of a document management system

The structures representing the document flow processes in an organization are considered by synthesizing them from the simplest structures. Presented in the form of graphs the processes of movement of documents become formalized and unambiguously defined. Using classification of typical structures of information flows and available mathematical model of management system, it is possible to formalize processes of movement of documents and their interaction in the form of management model, and also to make technical specification for development of information system and finished formalized statement of the problem of structure-parametric synthesis

Comprehensive analysis and assessment of prospective gold-ore zones using modern geophysical methods

В статье рассматривается комплексный анализ геологической и геофизической информации по проводимым исследованиям с целью выделения перспективных участков для проведения дальнейших геологоразведочных работ. Цель работы. Провести комплексный анализ и оценку перспективных золоторудных зон с применением современных геофизических методов. Методы работы. Вертикальное электрическое зондирование методом вызванной поляризации, метод вызванной поляризации в модификации срединного градиента, геоэлектрические разрезы по профилям, аномалии поляризуемости поля электрических сопротивлений, метод ТЗ электротомографии. Результаты работы. Авторами в 2019 г. в северной части участка на площади 2,87 кв. км были выполнены работы СГ-ВП по сети 50×10м с MN – 10 м. и АВ – 2000 м. Измерения DU и φвппроводились на частоте 1.22 Гц измерителями МЭРИ – 24 и ЭИН – 209 (режим измерения частотный). Использовался генератор ГЭР – 5000 – 25 (мощность 5 кВт). По результатам измерений построены карты изолиний поляризуемости и кажущегося сопротивления. Следует отметить, что при определении сдвига фаз φвп в частотном режиме сигнал, используемый для измерения сдвига фаз при равных DU с импульсным режимом измерений в 30-100 раз выше. Это основное преимущество фазовых измерений над импульсными. Как видно из приведенного сравнения уменьшение длины приемной линии и шага наблюдений позволило увеличить детальность исследований СГ-ВП и выйти на уровень рудных тел, заданных в техническом задании. По результатам ТЗ электротомографии и ВЭЗ-ВП получены близкие результаты, хотя методически и теоретически ТЗ обладает в данных условиях большей детальностью и информативностью. По результатам геофизических работ построены карты изолиний и графиков ρк и φвп, выявлена их связь с рудовмещающими структурами и отдельными рудными телами. Всего выявлено 14 локальных аномалий поляризуемости связанных с золото-кварц-сульфидными и сульфидными рудными телами. Выявлены площадные аномалии повышенной поляризуемости и низких значений электрического сопротивления СГ-ВП вдоль Западной рудно-тектонической зоны. Они связаны с метасоматическими процессами в пределах Западной зоны сбросо-сдвигов. На площади работ отмечены слабоконтрастные аномалии магнитного поля в северо-западной части Северной зоны. Отмечено сильное влияние рельефа на характер магнитного поля, вследствие чего наблюдается корреляция хребтов с минимумами магнитного поля. The article discusses a comprehensive analysis of geological and geophysical information on ongoing research in order to identify promising areas for further exploration. Aim. Conduct a comprehensive analysis and assessment of promising gold ore zones using modern geophysical methods. Methods. Vertical electrical sounding by the induced polarization method, the induced polarization method in the modification of the median gradient, geoelectric sections along the profiles, anomalies of the polarizability of the electrical resistance field, TK method of electrotomography. Results. The authors in 2019 in the northern part of the site on an area of 2.87 sq. km SG-VP works were performed on a network of 50 × 10m with MN -10m. and AB - 2000 m. Measurements of DU and φvp were carried out at a frequency of 1.22 Hz with meters MARI - 24 and EIN - 209 (frequency measurement mode). Used generator GER - 5000 - 25 (power 5 kW). Based on the measurement results, maps of isolines of polarizability and apparent resistivity were constructed. It should be noted that when determining the phase shift φvp in the frequency mode, the signal used to measure the phase shift at equal DU with the pulse measurement mode is 30-100 times higher. This is the main advantage of phase measurements over pulsed ones. As can be seen from the above comparison, a decrease in the length of the receiving line and the step of observations made it possible to increase the detail of SG-VP studies and to reach the level of ore bodies specified in the terms of reference. Based on the results of the technical specification for electrotomography and VES-IP, similar results were obtained, although methodologically and theoretically, the technical specification has greater detail and information content under these conditions. Based on the results of geophysical work, maps of isolines and graphs of ρк and φвп were constructed, their relationship with ore-bearing structures and individual ore bodies was revealed. In total, 14 local anomalies of polarizability associated with gold-quartz-sulfide and sulfide ore bodies have been identified. Areal anomalies of increased polarizability and low values of electrical resistance of SG-VP were revealed along the Western ore-tectonic zone. They are associated with metasomatic processes within the Western fault-strike zone. Low-contrast magnetic field anomalies in the northwestern part of the Northern Zone were noted in the survey area. A strong influence of the relief on the nature of the magnetic field was noted, as a result of which a correlation of the ridges with the minima of the magnetic field is observed

Using Decagon EC-5sensors for monitoring soil moisture

The aim of the study. To assess the possibilities of using the Decagon EC-5 sensor in research practice, especially under the conditions of its stationary installation; and to study with its help the dynamics of soil profile moistening and moisture migration under different weather conditions. Location and time of the study. The study was carried out on the territory of the Ust-Kamensky (forest-steppe) research station of the Institute of Soil Science and Agrochemistry of the Siberian Branch of the Russian Academy of Sciences (55.005507 N, 83.858635 E). The object of the study was the dark gray forest soil (Luvic Greyzemic Phaeozem). Five Decagon EC-5 sensors were installed at 9, 13, 18, 22 and 27cm depths in a small (30cm deep) soil pit and connected to the Em50 recorder. The necessary calibration was carried out beforehand. The sensors functioned from June 13 to July 7, 2017. Main results. The study showed that this device is suitable for a wide range of applications. According to the sensor readings, it was possible to trace the migration of moisture within the soil profile, as well as to differentiate it into gravitational and capillary water, as well as to establish the fact of precipitation with an accuracy of an hour and to calculate the precipitated amount. Statistical analysis of the obtained data showed low values of data variance and the coefficient of variation, which indicated high data homogeneity. The use of these sensors can improve the traditional flood method for determining the maximum soil water holding capacity. Moreover, detailed recording of soil moisture, provided by Decagon EC-5 sensors, in combination with Thermochron sensors for soil temperature recording, allows to study quantitative indicators of thermal gradient moisture flux at a new level. Conclusions. The study showed that Decagon EC-5 sensors comply with their technical specification and have good prospects for usage both in research and agricultural production. Provided its preliminary calibration and producing the calibration curves for the studied soils, the sensors allow quick and accurate measurement of the soil volumetric moisture content. The frequency and rate of sensor readings takes research on the dynamics and migration of moisture in soils to an entirely new level.

Pengembangan spesifikasi teknis sistem pemantau radiasi lingkungan berbasis spektrometer gama untuk pengawasan ketenaganukliran di Indonesia

THE INDONESIAN RADIATION DATA MONITORING SYSTEM (IRDMS) IS A NETWORK CATEGORIZED AS COMPLEX PROBLEMS WITH INFLUENCING FACTORS INTO A SINGLE UNIT AS MULTIPLE PROBLEMS THAT MUST SOLVE THROUGH VARIOUS APPROACHES OPTIMALLY. One of the approaches required is the application of optimization. For example, optimization is needed between the detection sensitivity of the radiation source and the number of false alarms due to the permissible background radiation by determining the operating parameters of the monitor. In addition, optimization is needed between costs and data (information) obtained through determining the influencing factors in establishing a monitoring base, namely the purpose of installation at the location (safety and security), demographics, legal subjects, resources, type (technology) detectors, and environmental radioactivity. To increase the national content for the use of the product, the problem statement of this paper focuses on developing technical specifications for the type of low-resolution gamma spectrometer-based monitor (detector) following the analytical method developed by the authors for the determination of alarms triggered by radiation from facilities and equipment. This study aims to develop IRDMS technical specifications following the needs of nuclear control and bridge the gap (transition) of acceptance of national content before the parties can accept it as SNI. This proposed technical specification was adopted from the international standard IEC 61017:2016 and modified to suit the proposed alarm determination analysis method and Indonesian conditions, including consultation with interested parties. The content of this technical specification is relatively broad in scope. It is hoped that it can be adopted by parties who must carry out environmental monitoring following regulatory criteria and with the ability to provide alarms by increasing radiation doses equivalent to natural events (especially by rain). Keywords: environmental monitoring, gamma spectrometer, regulatory oversight, early warning

Standardization Lead to Potential Cost Saving in the One of the Clusters in Southern of Sultanate of Oman

This paper is for people to realize a strategic way of continuous improvement though optimization and standardization process with a minimum of 10% target cost reduction while developing capability in the organization in the south of Oman. BN area is one of the main production areas in PDO (Petroleum Development of Oman) and is being operated under BR cluster from 1980s. Approximately eleven fields in the BN area are contributing to the success today. Continuous improvement through optimization and cost reduction has always been a top priority, where long term production and safety has been fulfilled. In 2020, this team has been put together to look into the overall cost saving potential with the clear management steering of "Do not Leave any Stone Unturned". A mixture of experience and young team members are retained to ensure capability development in the organization. One of the key items that this team looked at is to standardize of upcoming Oil Producers and Water Injectors well design. The well design in at least 7 fields in the BN area has been reviewed and realized the value and risk through competitive scoping exercise. By avoiding looking at the fields in isolation, the team has considered a similarity of well functionality and had identified where the standard well design can be applied. Minimum functional requirements lead to minimum technical specification and building into a staircase of option with clear associated risk for each option. Through the analysis, a potential optimization of an existing well design has been discovered and is currently undergone further maturation toward design endorsement. With the maturation of the uniformity of well design in the area, it is foreseeing as an opportunity to ensure improvement can be sustained in the long run. Minimum 10% saving of well cost through standardization and efficiency in project management is a target set, aiming to provide stability in planning. In addition, the team are looking into even more than 10% cost saving through innovative contracting strategy. It could potentially help to speed up the delivery of the project, accelerate production with less waiting time i.e. improve material stock management, simplify procurement process, ensure that the experience remains in the organization and will allow for replication in the future. The approach involves a combination of integrating team from subsurface, surface, wells, contract, and procurement to enhance cost saving to the company. This has proven to be effective and aligned with the company's focus to consolidate a commercial mind-set thinking in each development.

Software-Defined NB-IoT Uplink Framework—The Design, Implementation and Use Cases

In the radiocommunication area, we may observe a rapid growth of new technology, such as 5G. Moreover, all the newly introduced radio interfaces, e.g., narrowband Internet of Things (NB-IoT), are strongly dependent on the software. Hence, the radiocommunication software development and optimization, as well as the 3GPP technical specification, should be introduced at the academic level of education. In this paper, a software-defined NB-IoT uplink framework in the field of design is presented, as well as its realization and potential use cases. The framework may be used as an academic tool for developing, investigating, and optimizing the digital transmitter paths. The proposed realization is focused on the key elements in the physical layer of the NB-IoT interface used in the sensor devices. Furthermore, the paper also highlights the need of the data processing optimization to minimize the power consumption and usage of the resources of the NB-IoT node during transmitting gathered telemetric data.

Ontology-Enriched Specifications Enabling Findable, Accessible, Interoperable, and Reusable Marine Metagenomic Datasets in Cyberinfrastructure Systems

Marine microbial ecology requires the systematic comparison of biogeochemical and sequence data to analyze environmental influences on the distribution and variability of microbial communities. With ever-increasing quantities of metagenomic data, there is a growing need to make datasets Findable, Accessible, Interoperable, and Reusable (FAIR) across diverse ecosystems. FAIR data is essential to developing analytical frameworks that integrate microbiological, genomic, ecological, oceanographic, and computational methods. Although community standards defining the minimal metadata required to accompany sequence data exist, they haven’t been consistently used across projects, precluding interoperability. Moreover, these data are not machine-actionable or discoverable by cyberinfrastructure systems. By making ‘omic and physicochemical datasets FAIR to machine systems, we can enable sequence data discovery and reuse based on machine-readable descriptions of environments or physicochemical gradients. In this work, we developed a novel technical specification for dataset encapsulation for the FAIR reuse of marine metagenomic and physicochemical datasets within cyberinfrastructure systems. This includes using Frictionless Data Packages enriched with terminology from environmental and life-science ontologies to annotate measured variables, their units, and the measurement devices used. This approach was implemented in Planet Microbe, a cyberinfrastructure platform and marine metagenomic web-portal. Here, we discuss the data properties built into the specification to make global ocean datasets FAIR within the Planet Microbe portal. We additionally discuss the selection of, and contributions to marine-science ontologies used within the specification. Finally, we use the system to discover data by which to answer various biological questions about environments, physicochemical gradients, and microbial communities in meta-analyses. This work represents a future direction in marine metagenomic research by proposing a specification for FAIR dataset encapsulation that, if adopted within cyberinfrastructure systems, would automate the discovery, exchange, and re-use of data needed to answer broader reaching questions than originally intended.