scholarly journals Development of a new type of boiled sausage products with the addition of fish raw material

Vestnik MGTU ◽  
2017 ◽  
Vol 20 (3) ◽  
pp. 572-581
Author(s):  
V. I. Volchenko ◽  
◽  
E. L. Irlitsa ◽  
A. Yu. Glukharev ◽  
◽  
...  
Keyword(s):  
2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Songlin Yue ◽  
Yanyu Qiu ◽  
Pengxian Fan ◽  
Pin Zhang ◽  
Ning Zhang

Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.


2015 ◽  
Vol 244 ◽  
pp. 121-129
Author(s):  
Marian Peciar ◽  
Roman Fekete ◽  
Peter Peciar

This article deals with the presentation of modern applications for processing powdered, primarily hazardous, waste to an agglomeration form appropriate for subsequent processing by classical methods, for example in the construction, automotive and consumer goods industries. The aim of the research work was to set appropriate operating conditions in order to appreciate currently non-processable wastes resulting from the intensive production of often extremely expensive materials. Technologies which enable returning powder waste back into the primary production cycle were developed and experimentally tested, thus saving raw material resources. When necessary for the fixing of fine airborne particles with a problematic compacting curve (hard to compress, repulsive due to the surface charge) extrusion processes using a patented technology enabling controlled modification of shear forces in the extrusion zone were successfully applied. A new type of axial extruder allows the elimination of the liquid phase and as a result prevents the clogging of the extrusion chamber. In the case of need for granulation of sensitive materials (for example pharmaceuticals not allowing the addition of any kind of agglomerating fluid or reacting strongly in the contact of the two phases), a process of compaction between rolls with different profiled surface was successfully applied. The developed high technologies and the resulting products thus represent a major contribution to environmental protection in the context of not only the work but also the communal environment.


2021 ◽  
pp. 132-139
Author(s):  
Zhuldyz Isakovna Satayeva ◽  
Nurbibi Sovetovna Mashanova ◽  
Ainur Bolatbekovna Nurtayeva ◽  
Erzhan Talgatuly Akimzhanov

The article presents the results of the development of a new type of rabbit meat product - meatloaf. The consumption of healthy and nutritious foods rich in macro- and micronutrients, low in lipids and cholesterol, as well as various nutritional supplements, is preferable for the modern consumer. One of the promising types of meat as a dietary raw material is rabbit meat. As a result of the studies, a physicochemical analysis was carried out, the amino acid composition of rabbit meat was determined, and an organoleptic and tasting assessment of rabbit meatloaf was given. The technological scheme, the recipe is developed and the technological parameters of the meatloaf preparation are determined. It is recommended to store meatloaf no more than 10 days at a temperature of 0–2 °C with a humidity of 85-90 %. Meatloaf from rabbit meat has functional properties, contains a large number of vitamins PP – 174.3 mg, potassium minerals – 5052.8 mg, magnesium – 382.4 mg, phosphorus – 2875 mg, sodium – 8598.7 mg.The results of the nutritional and biological value of rabbit meatloaf allow us to make an informed conclusion about the high level of their nutritional value, which clearly illustrates the values of quality indicators.


Author(s):  
Yawei Hong ◽  
Shaobo Li ◽  
Shupei Wu ◽  
Tianhao Huang ◽  
Guang Liu ◽  
...  
Keyword(s):  

2012 ◽  
Vol 724 ◽  
pp. 221-224
Author(s):  
Lei Wu ◽  
Jun Zhou ◽  
Xin Zhe Lan ◽  
Xi Cheng Zhao ◽  
Yong Hui Song ◽  
...  

Bluecoke is a new type carbon product that prepared by low temperature carbonization process, which take lignite, long flame coal, not sticky and weak glue coal as raw material. At the same time tar and coke oven gas as by-products can be obtained. Two new technologies of Bluecoke production were introduced based on summary of way of producing Bluecoke by low metamorphic coal, namely the rich oxygen carbonization and the microwave carbonization. Both ways have their advantages and disadvantages. By contrast, the quality of coke and the content of valid gas are better using microwave carbonization, which to follow-up industry chains development significantly.


2010 ◽  
Vol 160-162 ◽  
pp. 1810-1815
Author(s):  
Jing Xian Li ◽  
Juan Qin Xue ◽  
Ming Wu ◽  
Yu Jie Wang ◽  
Wei Bo Mao

With chitosan as the raw material, a new type of resin material is synthesized through formaldehyde crosslinking. The effects of the reactant ratio, the reaction temperature, the reaction time, the stirring rate and the system pH on the cross-linking rate are studied in detail. The resin material is then characterized by means of IR. The experimental results show that the reaction occurs mainly on the amino and the hydroxyl of chitosan. The chitosan-based resin material with good properties of sphericity and acidresistivity can be prepared under the optimal experimental conditions, which are found to be 1:5 for the ratio of chitosan and formaldehyde, 60°C for the temperature, 1 h for the reaction time, 440r/min for the stirring rate and 10 for the pH.


Author(s):  
Vu Anh Tuan ◽  
Han Ngoc Duc ◽  
Nguyen Dinh Hoa ◽  
Nguyen Tran Hieu ◽  
Nguyen Trung Kien

Recently in Vietnam, steel-concrete composite structures especially composite beams are widely constructed in high-rise buildings. To apply broader in construction field mainly in secondary beam systems, the new type of slim-floor composite beam is proposed to aim at reducing the cost, saving the raw material, and decreasing the overall floor depth for sustainable development orientation. This type of floor beam structure consists of built-up hollow-shallow steel beam mandatory connected with cast in situ concrete slab through the openings at both side of web along the beam. The shear connection level of composite beam is depended on not only the friction at the connected surface between hollow steel section and concrete but also the shear resistance of concrete dowels, which go through the openings. The paper deals with an innovative shape of cross-section and design philosophy of composite beam according to EN 1994-1-1.


2020 ◽  
Vol 71 (9) ◽  
pp. 153-161
Author(s):  
Zhang Junmei ◽  
Zhu Ahui ◽  
Wang Yan ◽  
Hu Linbo ◽  
Xu Wenhui ◽  
...  

Potassium isopropoxide, involved in the cycle reaction of the intermediate dehydroester, is an important coupling agent in the production of drug pipemidic acid tablets. Current production problems of potassium isopropoxide by alkali method are the long period, the low productivity and the high energy consumption. To solve these problems, the reactive distillation production process of potassium isopropoxide was studied by simulation calculation and pilot experiment. The results show that the production process of potassium isopropanol is influenced by the separation efficiency and the reaction rate. The number of suitable theoretical plates for the column of azeotropic distillation is 14. The dissolution of solid potassium hydroxide is promoted and the reaction rate is increased, when a small amount of water is added to the raw material. It is found that the water content in the reflux organic phase can be reduced by lowering the liquid temperature in the condenser. It is also observed that suitable process conditions and the new type phase splitter can greatly reduced the production time of each batch of potassium isopropoxide.


Author(s):  
Olga E. Shtanko ◽  
◽  
Natalya V. Naumenko ◽  
Anastasiya V. Paimulina ◽  
Ekaterina A. Ashmarina ◽  
...  

2021 ◽  
Vol 12 ◽  
Author(s):  
Xin Wang ◽  
Lin Zhang ◽  
Hong Chen ◽  
Pan Wang ◽  
Ying Yin ◽  
...  

In order to improve the capability of Klebsiella pneumoniae to produce an important chemical raw material, 1,3-propanediol (1,3-PDO), a new type of K. pneumoniae x546 was obtained by glycerol acclimation and subsequently was used to produce 1,3-PDO. Under the control of pH value using Na+ pH neutralizer, the 1,3-PDO yield of K. pneumoniae x546 in a 7.5-L fermenter was 69.35 g/L, which was 1.5-fold higher than the original strain (45.91 g/L). After the addition of betaine, the yield of 1,3-PDO reached up to 74.44 g/L at 24 h, which was 40% shorter than the original fermentation time of 40 h. To study the potential mechanism of the production improvement of 1,3-PDO, the Tandem Mass Tags (TMT) technology was applied to investigate the production of 1,3-PDO in K. pneumoniae. Compared with the control group, 170 up-regulated proteins and 291 down-regulated proteins were identified. Through Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis, it was found that some proteins [such as homoserine kinase (ThrB), phosphoribosylglycinamide formyltransferase (PurT), phosphoribosylaminoimidazolesuccinocarboxamide synthase (PurC), etc.] were involved in the fermentation process, whereas some other proteins (such as ProX, ProW, ProV, etc.) played a significant role after the addition of betaine. Moreover, combined with the metabolic network of K. pneumoniae during 1,3-PDO, the proteins in the biosynthesis of 1,3-PDO [such as DhaD, DhaK, lactate dehydrogenase (LDH), BudC, etc.] were analyzed. The process of 1,3-PDO production in K. pneumoniae was explained from the perspective of proteome for the first time, which provided a theoretical basis for genetic engineering modification to improve the yield of 1,3-PDO. Because of the use of Na+ pH neutralizer in the fermentation, the subsequent environmental pollution treatment cost was greatly reduced, showing high potential for industry application in the future.


Sign in / Sign up

Export Citation Format

Share Document