FUNCTIONAL PURPOSE RABBIT MEAT ROLL

2021 ◽  
pp. 132-139
Author(s):  
Zhuldyz Isakovna Satayeva ◽  
Nurbibi Sovetovna Mashanova ◽  
Ainur Bolatbekovna Nurtayeva ◽  
Erzhan Talgatuly Akimzhanov
Keyword(s):  
Nutritional Value ◽  
Meat Product ◽  
Nutritional Supplements ◽  
Physicochemical Analysis ◽  
Raw Material ◽  
Technological Parameters ◽  
New Type ◽  
Rabbit Meat ◽  
High Level ◽  
Functional Purpose

The article presents the results of the development of a new type of rabbit meat product - meatloaf. The consumption of healthy and nutritious foods rich in macro- and micronutrients, low in lipids and cholesterol, as well as various nutritional supplements, is preferable for the modern consumer. One of the promising types of meat as a dietary raw material is rabbit meat. As a result of the studies, a physicochemical analysis was carried out, the amino acid composition of rabbit meat was determined, and an organoleptic and tasting assessment of rabbit meatloaf was given. The technological scheme, the recipe is developed and the technological parameters of the meatloaf preparation are determined. It is recommended to store meatloaf no more than 10 days at a temperature of 0–2 °C with a humidity of 85-90 %. Meatloaf from rabbit meat has functional properties, contains a large number of vitamins PP – 174.3 mg, potassium minerals – 5052.8 mg, magnesium – 382.4 mg, phosphorus – 2875 mg, sodium – 8598.7 mg.The results of the nutritional and biological value of rabbit meatloaf allow us to make an informed conclusion about the high level of their nutritional value, which clearly illustrates the values of quality indicators.

scholarly journals Investigation of organoleptic and functional-technological parameters of meat breads using mechanically deboned poultry meat

2019 ◽  
Vol 21 (91) ◽  
pp. 3-8 ◽  
Author(s):  
V. I. Tischenko ◽  
N. V. Bozhko ◽  
V. M. Pasichnyi ◽  
V. V. Brazhenko
Keyword(s):  
Nutritional Value ◽  
Raw Materials ◽  
Control Sample ◽  
Meat Products ◽  
Nutrient Deficiency ◽  
Raw Material ◽  
Poultry Meat ◽  
Material Base ◽  
Technological Parameters ◽  
Minced Meat

Creation of combined meat products combining traditional consumer properties, as well as the possibility of using non-traditional raw materials in their recipes, is aimed at the expansion and rational use of the raw material base of the meat processing complex and solves the problem of reducing nutrient deficiency in the diet of the population. Therefore, the issue of the use of mechanically deboned poultry meat in meat bread technology and its impact on qualitative indicators and functional and technological properties is relevant. The aim of the research was to study the feasibility of the use of mechanically deboned poultry meat in the technology of combined products. Three model recipes based on the formula-meat analogue “Chainyyi” were developed. The possibility of replacing beef and pork meat with duck meat and mechanically deboned poultry meat of turkey was studied in the bread recipes. The total amount of duck meat and mechanically deboned poultry meat was 63%. As a protein ingredient able to bind moisture and relatively inexpensive compared to meat raw material, 20% of the pig's heart was added to the formulation, as well as 2% XB Fiber. Other components of the analogue formulation have not changed. Combination of duck meat with mechanically deboned poultry meat of turkey and pork hearts in the abovementioned ratios as part of meatcontaining bread stuffing systems allowed to improve the nutritional value of the product and its qualitative indices. The research confirmed the possibility of combining regional and relatively cheap raw materials to increase the nutritional value of meatcontaining products, namely breads. The bulk of proteins in the experimental samples increased by 6.57–10.38% and was within the range of 17.96–17.34%. On average, 4.98% decreased the fat content, the product became less calorie relative to the analogue by 15.98–16.76%. The formulations of model minced meat were distinguished by a higher index of the water-holding capacity, the content of binding moisture and the best indicators of plasticity. This affected the quantity of finished products, which amounted to 120.64–117.3% to the mass of raw materials, while in the control sample this figure was lower by 3.49–7.47%.

Use of the Ural Region Plant Raw Materials in the Public Catering Enterprises Production

Food Industry ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 44-52
Author(s):  
Olga Feofilaktova ◽  
Olga Stoyanova ◽  
Konstantin Motovilov
Keyword(s):  
Nutritional Value ◽  
Consumer Preferences ◽  
Raw Materials ◽  
General Concept ◽  
Ural Region ◽  
Biologically Active ◽  
Raw Material ◽  
Technological Parameters ◽  
Plant Raw Materials ◽  
Public Catering

The article reveals the recipes and technologies development issues of berry sauces with lactulose for catering enterprises differing in functional orientation. Nowadays there is a need of sauces development using berries of the Ural region and lactulose due to the deficiency of many vitamins, minerals and other biologically active nutrients in the human diet, as well as the relevance to maintain the gastrointestinal tract microbiocenosis. The study was based on the assortment analysis results of berry sauces produced by public catering enterprises and the consumer preferences data. The results demonstrated that frozen and dried raw materials of foreign manufacturers were the main raw materials in the berry sauces production at the enterprises. This led to a decrease in nutritional value, organoleptic properties deterioration and an increase in the finished products cost. The researchers developed five recipes of sauces with using berries of the Ural region origin as the main raw material on the comparison basis of real, ideal and simulated consumer properties profiles of berry sauces according to the standard recipes including the main stages of the General concept of berry sauces production. They determined the optimal combinations and ratios of the introduced raw materials components considering the organoleptic quality indicators. The authors developed preparation technologies of new berry sauces types (defined stages of the components introduction and the main operations, and technological parameters); presented its description and technological scheme. A man tailored a point scale for evaluating organoleptic indicators of berry sauces quality to examine the quality of new berry sauces types; calculated nutritional value and mass fraction of dry substances in berry sauces. Obtained results indicate a high level of developed products quality. The researchers concluded that the sauces use of berries growing in the Ural region in the manufacture can reduce the berry sauces cost while increasing its nutritional value.

scholarly journals Justification of parameters of microwave installation for separation of down from skins of rabbits in the continuous mode

2019 ◽  
Vol 81 (1) ◽  
pp. 59-65
Author(s):  
E. A. Shamin ◽  
G. V. Novikova ◽  
M. V. Belova ◽  
O. V. Mikhailova
Keyword(s):  
Raw Materials ◽  
Economic Effect ◽  
Experimental Studies ◽  
Raw Material ◽  
Operating Costs ◽  
Meat Production ◽  
Technological Parameters ◽  
Multicriteria Assessment ◽  
Rabbit Meat ◽  
Nizhny Novgorod Region

Discusses the problem of reducing the operating costs of decontamination and the separation of fluff from the skins of rabbits in rabbit farms. Rabbit meat production amounted to 4.2 thousand tons, of which 70% of the total volume of Russian production falls on farms. In the Nizhny Novgorod region effectively bred rabbits breed "White Giant", which at the age of 560 days reach up to 6.8 kg, but the processing of skins is quite time-consuming. Rabbit down is widely used in the processing industry as a raw material with unsurpassed qualities for the production of knitwear, felt, cloth. The article describes the developed microwave unit with a disk conveyor with a power consumption of 6 kW, a capacity of 16 kg / h. The results of experimental studies to substantiate the complex of structural and technological parameters and modes of operation of microwave installations based on regression models, taking into account the multicriteria assessment of the technological process of separating the disinfected down raw materials from the skin with the sponge-soaked Mezdra. The annual economic effect of the use of microwave installation for collecting hair from the skins of rabbits in rabbit farms is 187 thousand rubles.

scholarly journals Economic significance, nutritional value and application of triticale

2021 ◽  
Vol 68 (4) ◽  
pp. 1089-1107
Author(s):  
Violeta Babić ◽  
Vera Rajičić ◽  
Nenad Đurić
Keyword(s):  
Agricultural Production ◽  
Crop Production ◽  
Nutritional Value ◽  
Global Scale ◽  
Raw Material ◽  
Economic Sustainability ◽  
Economic Significance ◽  
New Type ◽  
Positive Properties ◽  
Selection Of

Triticale is a new type of real grain, which was created by the breeding and selection of a man. This species deserves more and more attention from both domestic producers and producers on a global scale because it encompassed all the positive properties of wheat and rye. The paper clearly presents the knowledge about the importance, nutritional value and application of triticale and the effect of its usage in a diet of monogastric animals. The variety of uses, appropriate chemical composition, acceptable and studied breeding technology, classifies triticale as an irreplaceable source of energy and protein needs of animals. Due to its multiple usages: for grain, fodder and as a raw material for biofuel, contributes to the economic sustainability of crop production. The needs of this plant at the level of agrotechnical investments are less than in other cereals, so triticale is increasingly presented in organic and sustainable agricultural production.

Nutritional Value Research of Spelt Pasta with Vegetable Additives

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 61-70
Author(s):  
Oliya Fazullina ◽  
Stanislav Smirnov
Keyword(s):  
Dietary Fiber ◽  
Nutritional Value ◽  
Raw Materials ◽  
Health Indicators ◽  
Dietary Treatment ◽  
Raw Material ◽  
Whole Wheat ◽  
Healthy Nutrition ◽  
Physiologically Active Substances ◽  
Simple Carbohydrates

Health indicators of the population depend significantly on the food quality and nutritional value. Simple carbohydrates excess of and lack of protein, dietary fiber, vitamins, minerals, antioxidants and other physiologically active substances increase the risk of socially significant disease progress. The development and production of mass-consumed products with high nutritional and biological value, including affordable non-traditional raw materials use, are promising areas of the food industry development aimed at improving the nutritional status of the population. The article presents the research results on the developed Noodle products recipes from non-traditional raw materials that meet modern healthy nutrition requirements, intended for dietary treatment and dietary prevention of people with overweight / obesity. The research aimed at expanding the range of macaroni products with these characteristics. As the main raw material, a man selected whole-wheat flour – new spelt flour, and as additional raw materials – buckwheat flour, broccoli and celery powders. The researchers found that the introduction of macaroni products from buckwheat spelt, broccoli and celery powders into the recipe had a multidirectional effect, reducing or increasing various indicators of its nutritional value. The changes range did not affect the overall characteristics. The satisfaction degree of the average daily need for food substances and energy when consuming a portion of 100 g for each sample of developed Noodle products allows them to be classified as functional products that are protein and dietary fiber sources, according to the requirements of the TR CU 022/2011.

Proximate Chemical Analysis, Fatty Acid Profile and Microstructural Characteristics of Dromedary Camel Fats (Hump, Renal and Mesentery)

2020 ◽  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Profile ◽  
Meat Product ◽  
Oxidation Stability ◽  
Meat Products ◽  
Raw Material ◽  
Dromedary Camel ◽  
Mean Values ◽  
Animal Fat ◽  
Mesenteric Fat

The quality, safety, and suitability of animal fat for processing of a specific meat product is a critical issue. Increasing the human awareness about the health aspects associated with increased intake of animal fat, makes camel fat a suitable raw material for meat processing due to its excellent nutritional contribution. Therefore, the target of this study is examination of the sensory, physicochemical, fat oxidation, fatty acid profile, and other quality parameters of camel fat to evaluate the feasibility for processing of different meat products. To achieve this goal, 30 fat samples each from the hump, renal, and mesentery of Arabian male camels were investigated. The results showed that both the renal and mesenteric fat had honey color and medium-soft texture, while the hump had greyish-white color and hard texture. The sensory panel scores were significantly different between the hump and other fats. Hump fat had significantly (P<0.05) higher moisture, protein, and collagen content, while higher fat content was recorded in mesenteric fat. The fatty acid analysis showed that hump had high SFA and very low PUFA in comparison with both renal and mesenteric fat. Camel fat had high oxidation stability, and the mean values were very low in comparison with the levels of quality and acceptability. The ultrastructural analysis showed that hump fat had high elastin fibers which increase its hardness. The results indicated that both renal and mesenteric fat were more suitable for the production of various meat products than the hump.

Using Histological and Chemical Methods for Detection of Unauthorized Tissues Addition in Emulsion Type Meat Product

2020 ◽  
Keyword(s):  
Vascular Tissue ◽  
Meat Product ◽  
Calcium Content ◽  
Processed Meat ◽  
Low Protein ◽  
Significant Difference ◽  
Different Types ◽  
Plant Stem ◽  
High Level ◽  
Reliable Methods

Total twenty different processed meat plant producing emulsion type sausage were histologically and chemically examined for detection of adulteration with unauthorized tissues. Results revealed that samples were adulterated with different types of animal tissues included; hyaline cartilage, tendon, spongy bone, peripheral nerve trunk, basophilic matrix, lymphatic tissue, fascia, fibrocartilage and vascular tissue. Moreover, these samples were adulterated Also, adulterated with plant tissue included; plant stem, leaves and root. Chemical analysis showed a significant difference in their chemical composition (moisture, fat, protein, ash and calcium) content. Moisture and fat content varied around the permissible limit of E.S.S. while low protein, high ash and calcium content was detected in the examined samples. Therefore, Histological and chemical examinations can be used as reliable methods to detect adultration using unauthorized addition of both animal and plant tissues in processed meat product samples which revealed a high level of falsification.

scholarly journals Sodium Metasilicate Cemented Analogue Material and Its Mechanical Properties

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Songlin Yue ◽  
Yanyu Qiu ◽  
Pengxian Fan ◽  
Pin Zhang ◽  
Ning Zhang
Keyword(s):  
Complex Geometry ◽  
Sodium Metasilicate ◽  
Raw Material ◽  
Fine Aggregate ◽  
Regression Equations ◽  
Deformation And Failure ◽  
Orthogonal Experiments ◽  
Low Modulus ◽  
New Type ◽  
The Relationship

Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand), fine aggregate (barite powder), and cementitious material (anhydrous sodium silicate). The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.

scholarly journals Effect of Inulin on the Physical, Chemical and Sensory Quality Attributes of Polish Chicken Burgers

2012 ◽  
Vol 1 (1) ◽  
pp. 169 ◽  
Author(s):  
Aneta Cegielka ◽  
Krzysztof Tambor
Keyword(s):  
Thermal Processing ◽  
Nutritional Value ◽  
Sensory Quality ◽  
Raw Material ◽  
Font Size ◽  
Control Product ◽  
Physical Chemical ◽  
Sensory Analyses ◽  
Addition Level

<span style="font-family: Times New Roman; font-size: small;"> </span><p>Four formulations of chicken burger were prepared: control product without inulin, and products with 1.0, 2.0 or 3.0 % of inulin (in relation to the weight of meat, fatty raw material, and water), respectively. Physical, chemical and sensory analyses were made to evaluate the effect of inulin on the quality of cooked burgers. The results showed that the application of inulin did not cause significant decrease of the thermal processing yield nor the shear force of the products. However, the addition of inulin resulted in slight, but significant differences (P &lt; 0.05) in chemical composition and energy value of burgers. Burgers of all formulations were acceptable in sensory characteristics. The addition level of inulin not higher than 1.0 %, did not result in deterioration of physical, chemical and sensory quality characteristics of chicken burgers. To improve the nutritional value of chicken burgers, the modification of fatty acid composition is recommended.</p><span style="font-family: Times New Roman; font-size: small;"> </span>

Agglomeration Technologies of Processing Powder Wastes

2015 ◽  
Vol 244 ◽  
pp. 121-129
Author(s):  
Marian Peciar ◽  
Roman Fekete ◽  
Peter Peciar
Keyword(s):  
Research Work ◽  
Operating Conditions ◽  
Airborne Particles ◽  
Raw Material ◽  
Production Cycle ◽  
Shear Forces ◽  
Material Resources ◽  
New Type ◽  
Two Phases ◽  
High Technologies

This article deals with the presentation of modern applications for processing powdered, primarily hazardous, waste to an agglomeration form appropriate for subsequent processing by classical methods, for example in the construction, automotive and consumer goods industries. The aim of the research work was to set appropriate operating conditions in order to appreciate currently non-processable wastes resulting from the intensive production of often extremely expensive materials. Technologies which enable returning powder waste back into the primary production cycle were developed and experimentally tested, thus saving raw material resources. When necessary for the fixing of fine airborne particles with a problematic compacting curve (hard to compress, repulsive due to the surface charge) extrusion processes using a patented technology enabling controlled modification of shear forces in the extrusion zone were successfully applied. A new type of axial extruder allows the elimination of the liquid phase and as a result prevents the clogging of the extrusion chamber. In the case of need for granulation of sensitive materials (for example pharmaceuticals not allowing the addition of any kind of agglomerating fluid or reacting strongly in the contact of the two phases), a process of compaction between rolls with different profiled surface was successfully applied. The developed high technologies and the resulting products thus represent a major contribution to environmental protection in the context of not only the work but also the communal environment.

Sign in / Sign up

Export Citation Format

Share Document