<p>One-Step Preparation of an AgNP-nHA@RGO Three-Dimensional Porous Scaffold and Its Application in Infected Bone Defect Treatment</p>

AbstractThe development of an effective scaffold for bone defect repair is an urgent clinical need. However, it is challenging to design a scaffold with efficient osteoinduction and antimicrobial activity for regeneration of bone defect. In this study, we successfully prepared a hydroxyapatite (HA) porous scaffold with a surface-specific binding of peptides during osteoinduction and antimicrobial activity using a three-dimensional (3D) printing technology. The HA binding domain (HABD) was introduced to the C-terminal of bone morphogenetic protein 2 mimetic peptide (BMP2-MP) and antimicrobial peptide of PSI10. The binding capability results showed that BMP2-MP and PSI10-containing HABD were firmly bound to the surface of HA scaffolds. After BMP2-MP and PSI10 were bound to the scaffold surface, no negative effect was observed on cell proliferation and adhesion. The gene expression and protein translation levels of type I collagen (COL-I), osteocalcin (OCN) and Runx2 have been significantly improved in the BMP2-MP/HABP group. The level of alkaline phosphatase significantly increased in the BMP2-MP/HABP group. The inhibition zone test against Staphylococcus aureus and Escherichia coli BL21 prove that the PSI10/HABP@HA scaffold has strong antibacterial ability than another group. These findings suggest that 3D-printed HA scaffolds with efficient osteoinduction and antimicrobial activity represent a promising biomaterial for bone defect reconstruction.

Download Full-text

Treatment of massive iliac chondrosarcoma with personalized three-dimensional printed tantalum implant: a case report and literature review

Journal of International Medical Research ◽

10.1177/0300060520959508 ◽

2020 ◽

Vol 48 (10) ◽

pp. 030006052095950

Author(s):

Zhong Li ◽

Ge Chen ◽

Yi Xiang ◽

Aikeremujiang Muheremu ◽

Xianzhe Wu ◽

...

Keyword(s):

Bone Defect ◽

Three Dimensional ◽

Treatment Strategies ◽

Postoperative Recovery ◽

Pelvic Bone ◽

Low Grade ◽

Current Case ◽

History Of ◽

One Step ◽

Instrumentation Failure

Although customized three-dimensional tantalum implants have been used to treat a large variety of diseases, few reports have described the application of such implants to reconstruct large pelvic bone defects after the removal of massive tumors. We herein describe a 30-year-old woman with a 9-year history of a massive low-grade chondrosarcoma in the pelvic bone. After removal of a solid 12- × 8- × 6-cm tumor with clear margins, we used a customized three-dimensional printed tantalum implant to fill the large pelvic bone defect and performed hip arthroplasty in a one-step surgery. The patient’s postoperative recovery was uneventful. She started walking 1 month after surgery, and she developed no tumor recurrence, instrumentation failure, or implant loosening during the 12-month follow-up period. This report describes the successful application of a customized three-dimensional printed implant to reconstruct a massive pelvic bone defect. Satisfactory functional recovery was achieved with no apparent complications. The methodology of the current case may benefit orthopedic and oncologic surgeons in designing treatment strategies for similar cases.

Download Full-text

Computer-guided frontal bone defect reconstruction using customized three dimensional PEEK-PSI

Egyptian Dental Journal ◽

10.21608/edj.2017.76758 ◽

2017 ◽

Vol 63 (3) ◽

pp. 2089-2095

Author(s):

Mostafa Shindy ◽

Khaled Amr ◽

Hussein Hatem

Keyword(s):

Bone Defect ◽

Three Dimensional ◽

Frontal Bone ◽

Defect Reconstruction ◽

Bone Defect Reconstruction

Download Full-text

Controllable Electrochemical Synthesis of Ag Hierarchical Micro/Nanostructures with High SERS-Activity

NANO ◽

10.1142/s1793292020500435 ◽

2020 ◽

Vol 15 (04) ◽

pp. 2050043

Author(s):

Huayu Zhou ◽

Jingjing Wang ◽

Qiong Yang ◽

Menglei Chen ◽

Changsheng Song ◽

...

Keyword(s):

Indium Tin Oxide ◽

Current System ◽

Three Dimensional ◽

Constant Current ◽

Localized Surface Plasmon ◽

Excitation Wavelength ◽

Raman Signal ◽

Mixed Solution ◽

Raman Enhancement ◽

One Step

We report a one-step electrochemical deposition technique to prepare three-dimensional (3D) Ag hierarchical micro/nanostructured film consisting of well-crystallized Ag nanosheets grown on an indium tin oxide (ITO) conductive substrate. The Ag hierarchical micro/nanostructures were fabricated in the mixed solution of AgNO3 and sodium citrate in a constant current system at room temperature. Through reduction of Ag[Formula: see text] electrodeposited on the surface of ITO substrate, nanoparticles were grown to form nanosheets which further combined into 3D sphere-like microstructures. The 3D Ag micro/nanostructures have many sharp edges and nanoscale gaps which can give rise to good Raman-enhanced effect. Due to localized surface plasmon resonance (LSPR) effects, these special Ag micro/nanostructures exhibited good Raman-enhanced performance. Using Rhodamine 6G (R6G) molecules as probe molecule, we studied the influence of excitation wavelength on Raman enhancement. The results showed that the 532[Formula: see text]nm excitation wavelength is the best to obtain the strongest Raman signal and to reduce the influence of other impurity peaks. Using the as-synthesized Ag hierarchical micro/nanostructures, we can detect the 10[Formula: see text][Formula: see text]mol/L R6G aqueous solution, exhibiting great Raman-enhanced effect.

Download Full-text

A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽

10.3390/en14071940 ◽

2021 ◽

Vol 14 (7) ◽

pp. 1940

Author(s):

Muhammad Usman Naseer ◽

Ants Kallaste ◽

Bilal Asad ◽

Toomas Vaimann ◽

Anton Rassõlkin

Keyword(s):

Additive Manufacturing ◽

Large Scale ◽

Three Dimensional ◽

Electrical Machines ◽

Electromagnetic Properties ◽

Scale Production ◽

Performance Parameters ◽

Large Scale Production ◽

One Step ◽

Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Download Full-text

Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

International Journal of Molecular Sciences ◽

10.3390/ijms22073391 ◽

2021 ◽

Vol 22 (7) ◽

pp. 3391

Author(s):

Sylwia Grabska-Zielińska ◽

Alina Sionkowska ◽

Ewa Olewnik-Kruszkowska ◽

Katarzyna Reczyńska ◽

Elżbieta Pamuła

Keyword(s):

Mechanical Properties ◽

Tissue Engineering ◽

Physicochemical Properties ◽

Silk Fibroin ◽

Three Dimensional ◽

Microscopy Imaging ◽

Maximum Deformation ◽

One Step ◽

Chitosan Blends ◽

Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

Download Full-text

Application of subject-specific adaptive mechanical loading for bone healing in a mouse tail vertebral defect

Scientific Reports ◽

10.1038/s41598-021-81132-8 ◽

2021 ◽

Vol 11 (1) ◽

Cited By ~ 1

Author(s):

Angad Malhotra ◽

Matthias Walle ◽

Graeme R. Paul ◽

Gisela A. Kuhn ◽

Ralph Müller

Keyword(s):

Mechanical Loading ◽

Bone Defect ◽

Bone Healing ◽

Three Dimensional ◽

Patient Specific ◽

Dependent Manner ◽

Micro Computed Tomography ◽

Computed Tomography Images ◽

Bone Defect Healing ◽

Subject Specific

AbstractMethods to repair bone defects arising from trauma, resection, or disease, continue to be sought after. Cyclic mechanical loading is well established to influence bone (re)modelling activity, in which bone formation and resorption are correlated to micro-scale strain. Based on this, the application of mechanical stimulation across a bone defect could improve healing. However, if ignoring the mechanical integrity of defected bone, loading regimes have a high potential to either cause damage or be ineffective. This study explores real-time finite element (rtFE) methods that use three-dimensional structural analyses from micro-computed tomography images to estimate effective peak cyclic loads in a subject-specific and time-dependent manner. It demonstrates the concept in a cyclically loaded mouse caudal vertebral bone defect model. Using rtFE analysis combined with adaptive mechanical loading, mouse bone healing was significantly improved over non-loaded controls, with no incidence of vertebral fractures. Such rtFE-driven adaptive loading regimes demonstrated here could be relevant to clinical bone defect healing scenarios, where mechanical loading can become patient-specific and more efficacious. This is achieved by accounting for initial bone defect conditions and spatio-temporal healing, both being factors that are always unique to the patient.

Download Full-text

Effects of Velvet Antler Polypeptide-Collagen/Chitosan Materials on Proliferation of Osteoblast

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.380-384.4295 ◽

2013 ◽

Vol 380-384 ◽

pp. 4295-4298

Author(s):

Wen He Zhu ◽

Jun Jie Xu ◽

Wei Zhang ◽

Yan Li ◽

Xiao Jing Lu ◽

...

Keyword(s):

Drug Treatment ◽

Bone Defect ◽

Three Dimensional ◽

Chitosan Scaffold ◽

Release Drug ◽

Dimensional Network ◽

Velvet Antler ◽

Result Show ◽

Long Time ◽

Velvet Antler Polypeptide

A highly osteogenic hybrid bioabsorbable scaffold was developed for bone reconstruction. Though the use of a bioabsorbable collagen and chitosan scaffold for loading velvet antler polypeptide to repair bone defect and drug treatment. Velvet antler polypeptide and collagen were extracted for developing the compounded material. The SEM results show that the collagen and chitosan scaffold maintain the natural three dimensional network structures. The cell proliferation experiment result show that the can promote the osteoblast proliferation for a long time . These results indicated that this compound scaffold can sustainable to release drug and is a good material in bone defect and drug treatment.

Download Full-text