scholarly journals Removal of lead ions from water by capacitive deionization electrode materials derived from chicken feathers

2019 ◽  
Vol 9 (3) ◽  
pp. 282-291 ◽  
Author(s):  
T. Alfredy ◽  
Y. A. C. Jande ◽  
T. Pogrebnaya
Keyword(s):  
Electrode Materials ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
Capacitive Deionization ◽  
Activation Temperature ◽  
Variable Parameters ◽  
Chicken Feathers ◽  
Bet Method ◽  
Removal Of Heavy Metals

Abstract Capacitive deionization (CDI) is a promising and rapidly growing technology for water treatment and the electrode materials play a key role in improving CDI performance. In this study, high surface area activated carbon was prepared from chicken feather (CF) bio-waste through pyrolysis and KOH activation; the KOH:CF ratio (R) and activation temperature (Ta) were variable parameters. The material was characterized by using the Brunauer, Emmett and Teller (BET) method, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The lead (Pb2+) removal test was performed with a CDI cell containing the fabricated carbon electrode and 100 mg L−1 Pb(NO3)2 solution; the sample prepared with the ratio R of 1:1 and Ta = 800 °C exhibited higher Pb2+ removal efficiency of 81% and electro sorption capacity of 4.1 mg g−1 at the electrode potential 1.2 V and flow rate 5 mL min−1. Therefore, CF-derived carbon is considered as a promising CDI electrode material for removal of heavy metals from waste water.

scholarly journals Carbon-Based Electric Double Layer Capacitors for Water Desalination

2010 ◽  
Author(s):  
Batya A. Fellman ◽  
Muataz Atieh ◽  
Evelyn N. Wang
Keyword(s):  
Electrode Materials ◽  
Salt Water ◽  
High Surface ◽  
High Surface Area ◽  
Water Desalination ◽  
Electrode Geometry ◽  
Capacitive Deionization ◽  
Water Stream ◽  
Carbon Based Nanomaterials ◽  
Carbon Based

In capacitive deionization (CDI), salt water is passed through two polarized electrodes, whereby the salt is adsorbed onto the electrode surface and removed from the water stream. This approach has received renewed interest for water desalination due to the development of new high-surface area carbon-based nanomaterials. However, there is currently limited understanding as to how electrode geometry, surface properties, and capacitance affect ion capture. In this work, we experimentally investigate various standard carbon-based electrode materials, including activated carbon and carbon cloths, as well as microfabricated silicon structures for CDI. Electrochemical characterization through cyclic voltammetry was used to determine the electrochemical properties of each material. In addition, a mini-channel test cell was fabricated to perform parametric studies on ion capture. By controlling electrode geometry and chemistry in these studies, the work helps elucidate transport mechanisms and provide insight into the design of optimal materials for capacitive deionization.

scholarly journals Capacitive deionization: a promising technology for water defluoridation: a review

2021 ◽  
Author(s):  
Tusekile Alfredy ◽  
Joyce Elisadiki ◽  
Yusufu Abeid Chande Jande
Keyword(s):  
Metal Oxides ◽  
High Selectivity ◽  
Electrode Materials ◽  
Review Paper ◽  
High Surface ◽  
High Surface Area ◽  
Ionic Species ◽  
Ion Adsorption ◽  
Capacitive Deionization ◽  
Commercial Scale

Abstract Capacitive deionization (CDI) is among the promising technologies employed for water purification. CDI has been studied for the removal of various ionic species from water including fluoride ion (F−) with promising results. However, there is no comprehensive literature that summarizes the use of CDI for water defluoridation applications. Therefore, this review paper critically analyzes different electrode materials that have been studied for water defluoridation, their electrosorption capacities and F− removal efficiencies. It further discussed the parameters that influence CDI efficiency during defluoridation and point out the issues of F− selectivity when coexisting with other ions in the solution. We can conclude that different electrode materials have shown different abilities in electrosorption of F−. The carbon-based materials possess high surface area and good electrical conductivity which is paramount for ion adsorption but lack selectivity for F− removal. Metal oxides and hydroxides have been reported with improved electrosorption capacity and high selectivity to F− due to the ion exchange between the F− and the hydroxyls surface of the metal oxides/hydroxides. Apart from the good performance of these materials for defluoridation, the discovery of actual practicability use of the electrode materials for defluoridation for commercial scale is still a need.

scholarly journals Rambutan peel derived porous carbons for lithium sulfur battery

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
Arenst Andreas Arie ◽  
Hans Kristianto ◽  
Ratna Frida Susanti ◽  
Joong Kee Lee
Keyword(s):  
High Surface ◽  
Specific Capacity ◽  
High Surface Area ◽  
Hydrothermal Carbonization ◽  
Koh Activation ◽  
Activation Process ◽  
Porous Carbons ◽  
Biomass Waste ◽  
Activation Temperature ◽  
Lithium Sulfur

AbstractPorous carbons were prepared from the biomass waste rambutan peels using hydrothermal carbonization followed by the KOH activation process. Rambutan peel derived porous carbons (RPC) with high surface area of 2104 m2 g−1 and large pore volume of 1.2 cm3 g−1 were obtained at KOH/carbon ratio of 4 and activation temperature of 900 °C. The as-obtained porous carbons were capable of encapsulating sulfur with a high loading of 68.2 wt% to form RPC/S composite cathode for lithium sulfur (Li–S) battery. High specific discharge capacities of about 1275 mAh g−1 were demonstrated by the RPC/S composites at 0.1 C. After 200 cycles at 0.1 C, a high specific capacity of 936 mAh g−1 was maintained, showing an excellent capacity retention of about 73%.

scholarly journals Adsorption of Hexavalent Chromium and Divalent Lead Ions on the Nitrogen-Enriched Chitosan-Based Activated Carbon

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1907
Author(s):  
Fatma Hussain Emamy ◽  
Ali Bumajdad ◽  
Jerzy P. Lukaszewicz
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Metal Removal ◽  
High Surface ◽  
Heavy Metal Removal ◽  
High Surface Area ◽  
Kinetics Of Adsorption ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order

Optimizing the physicochemical properties of the chitosan-based activated carbon (Ch-ACs) can greatly enhance its performance toward heavy metal removal from contaminated water. Herein, Ch was converted into a high surface area (1556 m2/g) and porous (0.69 cm3/g) ACs with large content of nitrogen (~16 wt%) using K2CO3 activator and urea as nitrogen-enrichment agents. The prepared Ch-ACs were tested for the removal of Cr(VI) and Pb(II) at different pH, initial metal ions concentration, time, activated carbon dosage, and temperature. For Cr(VI), the best removal was at pH = 2, while for Pb(II) the best pH for its removal was in the range of 4–6. At 25 °C, the Temkin model gives the best fit for the adsorption of Cr(VI), while the Langmuir model was found to be better for Pb(II) ions. The kinetics of adsorption of both heavy metal ions were found to be well-fitted by a pseudo-second-order model. The findings show that the efficiency and the green properties (availability, recyclability, and cost effectiveness) of the developed adsorbent made it a good candidate for wastewaters treatment. As preliminary work, the prepared sorbent was also tested regarding the removal of heavy metals and other contaminations from real wastewater and the obtained results were found to be promising.

High Cr(VI) Adsorption Performance of Coal-Based Activated Carbon in Aqueous Solution

2013 ◽  
Vol 798-799 ◽  
pp. 1123-1127
Author(s):  
Hua Lei Zhou ◽  
Qiong Qiong Zhu ◽  
Dong Hua Huang
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Pore Structure ◽  
Ph Value ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
Transmission Electron ◽  
Mesoporous Adsorbent ◽  
Initial Ph

The activated carbon with high surface area was prepared by KOH activation from anthracite and used as adsorbent for removal of Cr (VI) from aqueous solution. The pore structure and surface properties were characterized by N2 adsorption at 77K, transmission electron microscope (TEM) and Fourier transform infrared spectroscopy ( FTIR). Effect of pH and isotherms at different temperature were investigated. Results show that the prepared carbon is a microporous-and mesoporous-adsorbent with developed pore structure and abundant surface oxygen-containing groups. PH value of the solution plays key function on the adsorption. The chemical adsorption dominates the adsorption process. The activated carbon exhibits much higher Cr adsorption capacity than the commercial activated carbon at initial pH of ~3. The equilibrium adsorption data are fitted by both Freundlich model and Langmuir model well.

Rich N/O/S co-doped porous carbon with a high surface area from silkworm cocoons for superior supercapacitors

2019 ◽  
Vol 43 (48) ◽  
pp. 19372-19378 ◽  
Author(s):  
Jianyu Huang ◽  
Simin Liu ◽  
Zifang Peng ◽  
Zhuoxian Shao ◽  
Yuanyuan Zhang ◽  
...  
Keyword(s):  
Surface Area ◽  
Porous Carbon ◽  
Electrode Materials ◽  
Synergistic Effects ◽  
High Surface ◽  
High Surface Area ◽  
Porous Carbons ◽  
Co Doped

The synergistic effects of high surface area and abundant heteroatoms make porous carbons superior electrode materials.

scholarly journals Synthesis of Hierarchical Graphene-MnO2 Nanowire Composites with Enhanced Specific Capacitance

2019 ◽  
Vol 31 (8) ◽  
pp. 1709-1718
Author(s):  
T. Veldevi ◽  
K. Thileep Kumar ◽  
R.A. Kalaivani ◽  
S. Raghu ◽  
A.M. Shanmugharaj
Keyword(s):  
Surface Area ◽  
Electrode Materials ◽  
High Surface ◽  
Specific Capacity ◽  
High Surface Area ◽  
Rate Capability ◽  
Sulfate Solution ◽  
High Rate ◽  
Chemical Compositions ◽  
Structure Morphology

Hierarchical nanostructured graphene–manganese dioxide nanowire (G-MnO2-NW) composites have been prepared by hydrothermal synthesis route using water/1-decanol as the medium. Synthesized materials were analyzed using various characterization tools to corroborate their chemical compositions, structure/morphology and surface area. Electrochemical measurements of the synthesized G-MnO2-NW electrode materials delivered the highest specific capacity (255 Fg-1), high rate capability and improved cycling stability at 0.5 Ag–1 in 1M sodium sulfate solution and this fact may be attributed to its high surface area and porosity. Moreover, synthesized G-MnO2-NW electrodes displayed better energy and power density, when compared to the MnO2-NW based electrodes.

Sign in / Sign up

Export Citation Format

Share Document