scholarly journals Hydrodynamics and bed morphological characteristics around a boulder in a gravel stream

2019 ◽  
Vol 20 (2) ◽  
pp. 395-407 ◽  
Author(s):  
Xu Zexing ◽  
Zhang Chenling ◽  
Yao Qiang ◽  
Wang Xiekang ◽  
Yan Xufeng
Keyword(s):  
Froude Number ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Morphological Characteristics ◽  
Steep Slope ◽  
Mean Flow ◽  
Transect Line ◽  
Water And Sediment ◽  
The Mean ◽  
Erosion Volume

Abstract This paper presents experimental studies on hydrodynamics and bed morphological characteristics under varying water and sediment discharges over a gravel channel bed with a boulder. Firstly, flow characteristics over a non-eroded bed with a mild slope were investigated. Results show that along the transect line located one diameter away from the boulder centerline, the existence of the boulder has negligible impact on the mean flow characteristics, which are similar to flows over a flat bed. At the boulder centerline, the flow is largely deflected by the boulder and turbulence characteristics in the horizontal plane are largely enhanced in the wake of the boulder. Secondly, water scour experiments were carried out over a steep slope. It could be observed that scour occurred around the boulder and bedloads were deposited downstream, forming a typical pool–riffle sequence. An analysis shows that the length scale (L/D) of geometric features associated with pool depth, riffle height and pool–riffle distance (S/D) are positively related to the boulder-related Froude number (Frb): L/D = 1.18Frb − 0.11 and S/D = 12.5Frb + 0.6; and the erosion volume (Ve) for flat bed and boulder bed is positively and negatively related to the averaged Froude number (Fr): Ve/D3 = 37.1Fr − 21.3 and Ve/D3 = −44.8Fr − 38.6, where D is the boulder diameter.

scholarly journals Experimental study on the mean flow characteristics of a supersonic multiple jet configuration

2021 ◽  
Vol 108 ◽  
pp. 106377
Author(s):  
Mohammed Faheem ◽  
Aqib Khan ◽  
Rakesh Kumar ◽  
Sher Afghan Khan ◽  
Waqar Asrar ◽  
...  
Keyword(s):  
Experimental Study ◽  
Flow Characteristics ◽  
Mean Flow ◽  
The Mean

scholarly journals Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

2021 ◽  
Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Ebrahim Karimi-Sibaki ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Lorentz Force ◽  
Applied Magnetic Field ◽  
Numerical Study ◽  
Flow Direction ◽  
Experimental Studies ◽  
Submerged Entry Nozzle ◽  
Mean Flow ◽  
Slab Caster ◽  
The Mean

AbstractA numerical study is presented that deals with the flow in the mold of a continuous slab caster under the influence of a DC magnetic field (electromagnetic brakes (EMBrs)). The arrangement and geometry investigated here is based on a series of previous experimental studies carried out at the mini-LIMMCAST facility at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The magnetic field models a ruler-type EMBr and is installed in the region of the ports of the submerged entry nozzle (SEN). The current article considers magnet field strengths up to 441 mT, corresponding to a Hartmann number of about 600, and takes the electrical conductivity of the solidified shell into account. The numerical model of the turbulent flow under the applied magnetic field is implemented using the open-source CFD package OpenFOAM®. Our numerical results reveal that a growing magnitude of the applied magnetic field may cause a reversal of the flow direction at the meniscus surface, which is related the formation of a “multiroll” flow pattern in the mold. This phenomenon can be explained as a classical magnetohydrodynamics (MHD) effect: (1) the closure of the induced electric current results not primarily in a braking Lorentz force inside the jet but in an acceleration in regions of previously weak velocities, which initiates the formation of an opposite vortex (OV) close to the mean jet; (2) this vortex develops in size at the expense of the main vortex until it reaches the meniscus surface, where it becomes clearly visible. We also show that an acceleration of the meniscus flow must be expected when the applied magnetic field is smaller than a critical value. This acceleration is due to the transfer of kinetic energy from smaller turbulent structures into the mean flow. A further increase in the EMBr intensity leads to the expected damping of the mean flow and, consequently, to a reduction in the size of the upper roll. These investigations show that the Lorentz force cannot be reduced to a simple damping effect; depending on the field strength, its action is found to be topologically complex.

scholarly journals Influence of Rigid Emerged Vegetation in a Channel Bend on Bed Topography and Flow Velocity Field: Laboratory Experiments

Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 118 ◽  
Author(s):  
Hossein Hamidifar ◽  
Alireza Keshavarzi ◽  
Paweł M. Rowiński
Keyword(s):  
Laboratory Experiments ◽  
Flow Characteristics ◽  
Maximum Velocity ◽  
Flow Conditions ◽  
Mean Flow ◽  
Bed Topography ◽  
Channel Bend ◽  
Bed Erosion ◽  
Flow Hydraulics ◽  
The Mean

Trees have been used extensively by river managers for improving the river environment and ecology. The link between flow hydraulics, bed topography, habitat availability, and organic matters is influenced by vegetation. In this study, the effect of trees on the mean flow, bed topography, and bed shear stress were tested under different flow conditions. It was found that each configuration of trees produced particular flow characteristics and bed topography patterns. The SR (single row of trees) model appeared to deflect the maximum velocity downstream of the bend apex toward the inner bank, while leading the velocity to be more uniformly distributed throughout the bend. The entrainment of sediment particles occurred toward the area with higher values of turbulent kinetic energy (TKE). The results showed that both SR and DR (double rows of trees) models are effective in relieving bed erosion in sharp ingoing bends. The volume of the scoured bed was reduced up to 70.4% for tests with trees. This study shows the effectiveness of the SR model in reducing the maximum erosion depth.

Experimental and Numerical Investigations of the 3-D Turbulent Flow Characteristics Around Submerged Permeable Breakwaters

2017 ◽  
Author(s):  
Caleb Stanley ◽  
Georgios Etsias ◽  
Steven Dabelow ◽  
Dimitrios Dermisis ◽  
Ning Zhang
Keyword(s):  
Turbulent Flow ◽  
Laboratory Experiments ◽  
Flow Characteristics ◽  
Mean Flow ◽  
Turbulent Structures ◽  
3 Dimensional ◽  
The Mean ◽  
Design Simplicity ◽  
Study Laboratory ◽  
Geometric Designs

Submerged breakwaters are favored for their design simplicity in projects intended to dissipate wave energy and reduce erosion on coastlines. Despite their popularity, the effects that submerged breakwaters exhibit on the surrounding hydrodynamics are not clearly understood, mainly due to the flow complexity generated from 3-dimensional turbulent structures in the vicinity of the breakwaters that affect the mean flow characteristics and the transport of sediment. The objective of this study was to evaluate the effects that various geometric designs of submerged permeable breakwaters have on the turbulent flow characteristics. To meet the objective of this study, laboratory experiments were performed in a water-recirculating flume, in which the 3-dimensional velocity field was recorded in the vicinity of scaled breakwater models. Breakwaters that were tested include non-permeable, three-hole, and ten-hole models. The experimental data obtained was compared to results obtained from numerical simulations. Results demonstrated that permeable breakwaters exhibit more vertical turbulent strength than their non-permeable counterparts. It was also discovered that three-hole breakwater models produce higher turbulent fluctuations than that of the ten-hole breakwaters. The results from this study will be used eventually to enhance the performance of restoration projects in coastal areas in Louisiana.

A Continuous Prediction Method for Fully Developed Laminar, Transitional, and Turbulent Flows in Pipes

1975 ◽  
Vol 42 (1) ◽  
pp. 51-54 ◽  
Author(s):  
N. W. Wilson ◽  
R. S. Azad
Keyword(s):  
Turbulent Flows ◽  
Flow Characteristics ◽  
Prediction Method ◽  
Reynolds Numbers ◽  
Mean Flow ◽  
Number Range ◽  
Circular Pipes ◽  
The Mean ◽  
Single Set ◽  
Good Agreement

A single set of equations is developed to predict the mean flow characteristics in long circular pipes operating at laminar, transitional, and turbulent Reynolds numbers. Generally good agreement is obtained with available data in the Reynolds number range 100 < Re < 500,000.

Coherent structures and dominant frequencies in a turbulent three-dimensional diffuser

2012 ◽  
Vol 699 ◽  
pp. 320-351 ◽  
Author(s):  
Johan Malm ◽  
Philipp Schlatter ◽  
Dan S. Henningson
Keyword(s):  
Coherent Structures ◽  
Large Scale ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Low Frequency ◽  
Bulk Velocity ◽  
Time Signal ◽  
Mean Flow ◽  
The Mean ◽  
Dominant Frequencies

AbstractDominant frequencies and coherent structures are investigated in a turbulent, three-dimensional and separated diffuser flow at $\mathit{Re}= 10\hspace{0.167em} 000$ (based on bulk velocity and inflow-duct height), where mean flow characteristics were first studied experimentally by Cherry, Elkins and Eaton (Intl J. Heat Fluid Flow, vol. 29, 2008, pp. 803–811) and later numerically by Ohlsson et al. (J. Fluid Mech., vol. 650, 2010, pp. 307–318). Coherent structures are educed by proper orthogonal decomposition (POD) of the flow, which together with time probes located in the flow domain are used to extract frequency information. The present study shows that the flow contains multiple phenomena, well separated in frequency space. Dominant large-scale frequencies in a narrow band $\mathit{St}\equiv fh/ {u}_{b} \in [0. 0092, 0. 014] $ (where $h$ is the inflow-duct height and ${u}_{b} $ is the bulk velocity), yielding time periods ${T}^{\ensuremath{\ast} } = T{u}_{b} / h\in [70, 110] $, are deduced from the time signal probes in the upper separated part of the diffuser. The associated structures identified by the POD are large streaks arising from a sinusoidal oscillating motion in the diffuser. Their individual contributions to the total kinetic energy, dominated by the mean flow, are, however, small. The reason for the oscillating movement in this low-frequency range is concluded to be the confinement of the flow in this particular geometric set-up in combination with the high Reynolds number and the large separated zone on the top diffuser wall. Based on this analysis, it is shown that the bulk of the streamwise root mean square (r.m.s.) value arises due to large-scale motion, which in turn can explain the appearance of two or more peaks in the streamwise r.m.s. value. The weak secondary flow present in the inflow duct is shown to survive into the diffuser, where it experiences an imbalance with respect to the upper expanding corners, thereby giving rise to the asymmetry of the mean separated region in the diffuser.

Particle Image Velocimetry Measurements of the Mean Flow Characteristics in a Bubble Plume

2007 ◽  
Vol 133 (6) ◽  
pp. 665-676 ◽  
Author(s):  
Dong-Guan Seol ◽  
Tirtharaj Bhaumik ◽  
Christian Bergmann ◽  
Scott A. Socolofsky
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Flow Characteristics ◽  
Bubble Plume ◽  
Mean Flow ◽  
Image Velocimetry ◽  
The Mean

Mean Flow Characteristics of a Turbulent Offset Jet

1986 ◽  
Vol 108 (1) ◽  
pp. 82-88 ◽  
Author(s):  
J. R. R. Pelfrey ◽  
J. A. Liburdy
Keyword(s):  
Strain Rate ◽  
Flat Surface ◽  
Flow Characteristics ◽  
Wall Jet ◽  
Longitudinal Variation ◽  
Mean Flow ◽  
Region Flow ◽  
The Mean ◽  
Plane Jet ◽  
Offset Jet

A detailed study of the mean flow characteristics of a turbulent offset jet is presented. The flow is characterized by a longitudinal variation of curvature, skewed impingement onto a flat surface, a recirculating region, and the development of a wall jet region. Flow structure is described in the preimpingement, recirculation and impingement regions. An interdependence is shown among the pressure differential across the jet, jet curvature and entrainment. The magnitude of the curvature strain rate is found to be significant and implies that this flow cannot be accurately modelled as a thin shear layer. The jet decay and spread rates are similar to those of a plane jet if appropriate curved coordinates are used. The extent of the impingement region is approximately 20 nozzle widths downstream, in agreement with previous studies.

scholarly journals Experimental Study of Mean Flow Characteristics in the Near Field of Wedge-Shaped Swirling Jets

2020 ◽  
Vol 5 (10) ◽  
pp. 1199-1203
Author(s):  
Md. Mosharrof Hossain ◽  
Muhammed Hasnain Kabir Nayeem ◽  
Dr. Md Abu Taher Ali
Keyword(s):  
Flow Field ◽  
Near Field ◽  
Flow Characteristics ◽  
Velocity Profiles ◽  
Mean Flow ◽  
Mean Velocity ◽  
Potential Core ◽  
Swirling Jets ◽  
The Mean ◽  
Sinusoidal Flow

In this investigation experiment was carried out in 80 mm diameter swirling pipe jet, where swirl was generated by attaching wedge-shaped helixes in the pipe. All measurements were taken at Re 5.3e4. In the plain pipe jet the potential core was found to exist up to x/D=5 but in the swirling jet there was no existence of potential core. The mean velocity profiles were found to be influenced by the presence of wedge-shaped helixes in the pipe. The velocity profiles indicated the presence of sinusoidal flow field in the radial direction existed only in the near field of the jet. This flow field died out after x/D=3 and the existence of jet flow diminished after x/D=5.

Sign in / Sign up

Export Citation Format

Share Document