Pig Wastewater Treatment in Water Hyacinth Ponds

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2381-2384 ◽  
Author(s):  
C. Polprasert ◽  
S. Kessomboon ◽  
W. Kanjanaprapin
Keyword(s):  
Wastewater Treatment ◽  
Water Hyacinth ◽  
Loading Rate ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Cod Removal ◽  
Organic Loading Rate ◽  
Small Scale ◽  
N Removal ◽  
In Series

Small-scale and pilot-scale experiments were conducted on pig wastewater treatment in water hyacinth (Eichhornia crassipesl ponds. The main objectives were to evaluate the treatment performance of the water hyacinth ponds and to determine suitable operating conditions. From the experimental results obtained, the optimum organic loading rate was found to be 200 kg COD/(ha.d), while the hydraulic retention times were proposed to be 10-20 days. The % COD removal in the small-scale water hyacinth ponds were 74-93, while for the pilot-scale ponds the % COD removal were 52-72 because of fluctuations in the influent wastewater characteristics and occasional insect attacks on the water hyacinth leaves and stems. Similar results were obtained for N removal. Although the water hyacinth ponds were found to be feasible for pig wastewater treatment, at least one polishing pond in series should be provided to polish the water hyacinth pond effluents before discharging into the environment.

Sequenced anaerobic-aerobic treatment of high strength, strong nitrogenous landfill leachates

2004 ◽  
Vol 49 (5-6) ◽  
pp. 301-312 ◽  
Author(s):  
S.V. Kalyuzhnyi ◽  
M.A. Gladchenko
Keyword(s):  
Loading Rate ◽  
High Strength ◽  
Cod Removal ◽  
Organic Loading Rate ◽  
Inorganic N ◽  
Landfill Leachates ◽  
Total N ◽  
N Removal ◽  
Biological Nitrogen ◽  
Uasb Reactors

As a first step in treatment of high strength, strong nitrogenous landfill leachates (total COD - 9.66-20.56 g/l, total nitrogen 780-1,080 mg/l), the performance of laboratory UASB reactors has been investigated under sub-mesophilic (19±3°C) and psychrophilic (10±2°C) conditions. Under hydraulic retention time (HRT) of around 1.2 days, when the average organic loading rate (OLR) was around 8.5 g COD/l/day, the total COD removal accounted for 71% (on average) for sub-mesophilic regime. The psychrophilic treatment conducted under the average HRT of 2.44 days and the average OLR of 4.2 g COD/l/day showed an average total COD removal of 58% giving effluents more suitable for subsequent biological nitrogen removal. Both anaerobic regimes were quite efficient for elimination of heavy metals by concomitant precipitation in the form of insoluble sulphides inside the sludge. The subsequent submesophilic aerobic-anoxic treatment of submesophilic anaerobic effluents led to only 75% of total inorganic N removal due to COD deficiency for denitrification created by too efficient anaerobic step. On the contrary, psychrophilic anaerobic effluents (richer in COD compared to the submesophilic ones) were more suitable for subsequent aerobic-anoxic treatment giving the total N removal of 95 and 92% at 19 and 10°C, respectively.

scholarly journals Efficient high strength petrochemical wastewater treatment in a hybrid vertical anaerobic biofilm (HyVAB) reactor: a pilot study

2017 ◽  
Vol 12 (3) ◽  
pp. 501-513 ◽  
Author(s):  
Shuai. Wang ◽  
Nirmal. Ghimire ◽  
Gang. Xin ◽  
Eshetu. Janka ◽  
Rune. Bakke
Keyword(s):  
Wastewater Treatment ◽  
Hydraulic Retention Time ◽  
Loading Rate ◽  
High Strength ◽  
Pilot Scale ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Organic Loading ◽  
Petrochemical Wastewater ◽  
Step Flow

Performance of a pilot scale Hybrid Vertical Anaerobic Biofilm (HyVAB) reactor treating petrochemical refinery wastewater is presented here. The reactor is an integration of a bottom anaerobic sludge bed and a top aerobic biofilm stage and was operated continuously for 92 days at 21 ± 2 °C. Wastewater was fed continuously to the reactor with step flow increases reducing hydraulic retention time from 55 to 12 hours, increasing organic loading rate from 3 to 33 kg-COD/m3·d. The HyVAB removed on average 91% and 86% of the soluble and total feed COD, respectively, at steady state and loads up to 23 kg-COD/m3·d, of which 98% of the soluble COD removal occurred in the anaerobic stage. Methane yield ranged from 0.29 to 0.51 L/g-COD removed, including conversion of settled aerobic sludge to methane. Sludge production was low (0.04 kg-VSS/kg-COD removed) and biogas methane content high (84 ± 2%). The results demonstrated that HyVAB is an efficient, low footprint alternative for high strength wastewater treatment.

scholarly journals Sustainable Bio-methane generation from Petrochemical Wastewater using CSTR

2014 ◽  
Vol 1 (1) ◽  
pp. 1-4
Author(s):  
Md. Nurul Islam Siddique ◽  
Zularisham A. Wahid
Keyword(s):  
Wastewater Treatment ◽  
Loading Rate ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Organic Loading Rate ◽  
Petrochemical Wastewater ◽  
Methane Generation ◽  
Start Up ◽  
Thermophilic Condition

The effect of gradual increase in organic loading rate (0LR) and temperature on biomethanation from petrochemical wastewater treatment was investigated using CSTR. The digester performance measured at hydraulic retention time (HRT) of4 to 2d, and start up procedure of the reactor was monitoredfor 60 days via chemical oxygen demand (COD) removal, biogas and methane production. By enhancing the temperature from 30 to 55 “C Thermophilic condition was attained, and pH was adjusted at 7 i 0.5. Supreme COD removal competence was 98i0.5% (r = 0.84) at an 0LR of 7.5 g-COD/Ld and 4d HRT. Biogas and methane yield were logged to an extreme of 0.80 L/g-CODremoved d (r = 0.81), 0.60 L/g-CODremoved d (r = 0.83), and mean methane content of biogas was 65.49%. The full acclimatization was established at 55 C with high COD removal efficiency and biogas production. An 0LR of 7.5 g-COD/L d and HRT of 4 days were apposite forpetrochemical wastewater treatment.

scholarly journals Intermittent Aeration in a Hybrid Moving Bed Biofilm Reactor for Carbon and Nutrient Biological Removal

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 492 ◽  
Author(s):  
Gaetano Di Bella ◽  
Giorgio Mannina
Keyword(s):  
Loading Rate ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Operating Conditions ◽  
Organic Loading Rate ◽  
Intermittent Aeration ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Operational Conditions ◽  
N Removal

The paper presents an experimental study on a lab scale hybrid moving bed biofilm reactor with intermittent aeration. Specifically, a comparison between two different operating conditions was analyzed: continuous and intermittent aeration. Both continuous and intermittent aeration were monitored and compared in order to get the best operational conditions. The intermittent aeration campaign was sub-divided in three phases with different duration of alternation of aerobic and anoxic times and organic and nitrogen loading rates. The efficiency of N-removal improved by 70% during the intermittent aeration. The best condition was observed with 40 min of aeration and 20 min of no-aeration, an organic loading rate of 2.2 kgCODm−3day−1 and a nitrogen loading rate of 0.25 kgNm−3day−1: under these operational conditions the removal efficiencies for carbon and nitrogen were 93% and 90%, respectively. The derived results provide the basis for WWTP upgrade in order to meet stricter effluent limits at low energy requirements.

Operating Conditions and Kinetics of Wastewater Treatment in a Three-Phase Biological Fluidized Bed Reactor

2011 ◽  
Vol 396-398 ◽  
pp. 1989-1994
Author(s):  
Kun Hu ◽  
Zhen Zhong Li ◽  
Yong Guo ◽  
Wei Xing Huang
Keyword(s):  
Wastewater Treatment ◽  
Fluidized Bed ◽  
Loading Rate ◽  
Fluidized Bed Reactor ◽  
Operating Conditions ◽  
Continuous Treatment ◽  
Synthetic Wastewater ◽  
Organic Loading Rate ◽  
Three Phase ◽  
Kinetics Of

Systematic experiments were carried out with synthetic wastewater in order to investigate the operating conditions and kinetics of wastewater treatment in a three-phase biological fluidized bed reactor. It is found that with the COD loading rate changed stepwise from 3.5 to 11.2 kg COD/m3•d, the reactor can rapidly restore from each impact of COD load and maintain the removal rate for COD at 85% or above, presenting a high flexibility for the variation of organic loading rate (OLR) in the influent. While the operating OLR keeps constant, the increase of influent COD and NH3-N concentrations will be followed by the correspondingly increased removal rates, so that the COD and NH3-N concentrations in the effluent keep nearly constant. The batched experiments under different air supply conditions show that there exists an optimal air flow rate at which the most effective treatment can be achieved. Finally, a kinetics model of the continuous treatment process was derived based on mass balance and Monod equations, and the kinetic constants were determined by the experimental data at steady operating OLR.

scholarly journals Optimization of Biogas Production from Dairy Wastewater using Upflow Anaerobic Filter (UAF) Reactor

2020 ◽  
Vol 9 (4) ◽  
pp. 1469-1472
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Hydraulic Retention Time ◽  
Loading Rate ◽  
Biogas Production ◽  
Cod Removal ◽  
Dairy Wastewater ◽  
Organic Loading Rate ◽  
Anaerobic Filter ◽  
Cod Removal Efficiency

The present study explores the feasibility of biogas production from dairy wastewater in the UAF reactor with simultaneous wastewater treatment. The study was carried out at different hydraulic retention times (8h, 12h, 16h, 24h). Two different media such as pebble stone media and aggregate media were used as the packed media. The maximum COD removal efficiency of 91.55 % is achieved at the hydraulic retention time of 24 Hours with an organic loading rate of 1.35 kg/m3 /d for aggregate media, whereas for pebble stone media a maximum COD removal efficiency of 76.32 % is achieved. Before the start of the experiments, the COD/BOD ratio is fixed to 1.4 with initial COD and BOD of 1350 mg/L and 960 mg/L. So, from the results it is concluded that the Upflow Anaerobic Filter (UAF) Reactor can be used as a one of the best treatment methods for the diary wastewater treatment.

Upgrading Wastewater Treatment by Water Hyacinth in Developing Countries

1990 ◽  
Vol 22 (7-8) ◽  
pp. 153-160 ◽  
Author(s):  
Pradeep Kumar ◽  
R. J. Garde
Keyword(s):  
Wastewater Treatment ◽  
Water Hyacinth ◽  
Treatment Plant ◽  
Cod Removal ◽  
Treatment System ◽  
Synthetic Wastewater ◽  
Second Phase ◽  
Treatment Unit ◽  
Batch Studies ◽  
New Treatment

With increasing stress on existing wastewater treatment systems, it is necessary either to upgrade the treatment unit(s) or install an entirely new treatment plant. Obviously, the upgrading is preferred over the alternative of having a new system. Keeping this in view, in the present project, an attempt has been made to explore the possibility of upgrading existing facultative ponds using water hyacinth. Bench-scale batch studies were designed to compare the performance of hyacinth treatment system with facultative ponds. Investigations were carried out with synthetic wastewater having COD in the range of 32.5-1090 mg/l. The efficiency of COD removal in water hyacinth ponds was 15-20 percent more than the facultative ponds. Based on the results, an empirical model has been proposed for COD removal kinetics. In the second phase of the project a hyacinth pond was continuously operated. BOD, COD, TS, TN, TP, pH, and DO were regularly monitored. However, the DO of the effluent from hyacinth treatment system was considerably reduced. Effluent should be aerated before it is discharged. The results indicate that the existing facultative ponds can be stalked with water hyacinth to improve their performance as well as hyacinth treatment systems can be installed to support the conventional treatment.

Anaerobic Treatment of Polyethylene Terephthalate (PET) Wastewater from Lab to Full Scale

1999 ◽  
Vol 40 (8) ◽  
pp. 229-236 ◽  
Author(s):  
F. Fdz-Polanco ◽  
M. D. Hidalgo ◽  
M. Fdz-Polanco ◽  
P. A. García Encina
Keyword(s):  
Polyethylene Terephthalate ◽  
Loading Rate ◽  
Treatment Plant ◽  
Textile Wastewater ◽  
Anaerobic Treatment ◽  
Cod Removal ◽  
Organic Loading Rate ◽  
Foam Formation ◽  
Organic Loading ◽  
Start Up

In the last decade Polyethylene Terephthalate (PET) production is growing. The wastewater of the “Catalana de Polimers” factory in Barcelona (Spain) has two main streams of similar flow rate, esterification (COD=30,000 mg/l) and textile (COD=4000 mg/l). In order to assess the anaerobic treatment viability, discontinuous and continuous experiments were carried out. Discontinuous biodegradability tests indicated that anaerobic biodegradability was 90 and 75% for esterification and textile wastewater. The textile stream revealed some tendency to foam formation and inhibitory effects. Nutrients, micronutrients and alkali limitations and dosage were determined. A continuous lab-scale UASB reactor was able to treat a mixture of 50% (v) esterification/textile wastewater with stable behaviour at organic loading rate larger than 12 g COD/l.d (0.3 g COD/g VSS.d) with COD removal efficiency greater than 90%. The start-up period was very short and the recuperation after overloading accidents was quite fast, in spite of the wash-out of solids. From the laboratory information an industrial treatment plant was designed and built, during the start-up period COD removal efficiencies larger than 90% and organic loading rate of 0.6 kg COD/kg VSS.d (5 kg COD/m3.d) have been reached.

scholarly journals Performance of Microbial Fuel Cell for Wastewater Treatment and Electricity Generation

2013 ◽  
Vol 2 (2) ◽  
pp. 131-135
Author(s):  
Z Yavari ◽  
H Izanloo ◽  
K Naddafi ◽  
H.R Tashauoei ◽  
M Khazaei
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electricity Generation ◽  
Loading Rate ◽  
Synthetic Wastewater ◽  
Organic Loading Rate ◽  
Organic Loading ◽  
Sustainable Operation ◽  
Cell Reactor

Renewable energy will have an important role as a resource of energy in the future. Microbial fuel cell (MFC) is a promising method to obtain electricity from organic matter andwastewater treatment simultaneously. In a pilot study, use of microbial fuel cell for wastewater treatment and electricity generation investigated. The bacteria of ruminant used as inoculums. Synthetic wastewater used at different organic loading rate. Hydraulic retention time was aneffective factor in removal of soluble COD and more than 49% removed. Optimized HRT to achieve the maximum removal efficiency and sustainable operation could be regarded 1.5 and 2.5 hours. Columbic efficiency (CE) affected by organic loading rate (OLR) and by increasing OLR, CE reduced from 71% to 8%. Maximum voltage was 700mV. Since the microbial fuel cell reactor considered as an anaerobic process, it may be an appropriate alternative for wastewater treatment

Sign in / Sign up

Export Citation Format

Share Document