Acetate uptake by PHA-accumulating and non-PHA-accumulating organisms in activated sludge from an aerobic sequencing batch reactor fed with acetate

2010 ◽  
Vol 62 (1) ◽  
pp. 8-14 ◽  
Author(s):  
M. Oshiki ◽  
H. Satoh ◽  
T. Mino
Keyword(s):  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Nile Blue ◽  
Batch Reactor ◽  
Reducing Power ◽  
Dapi Staining ◽  
Microbial Cells ◽  
Nile Blue A ◽  
Acetate Uptake ◽  
Uptake Rates

The present study was conducted to evaluate the specific acetate uptake rates of microorganisms with and without polyhydroxyalkanoates (PHA) accumulation. Activated sludge was aerobically incubated with 75 mgC L−1 radiolabeled or non-labeled acetate, and acetate consumption and PHA accumulation were monitored. Microorganisms were quantified as follows: all microbial cells by DAPI staining, whole acetate utilizing organisms by microautoradiography, and PHA-accumulating organisms by staining with Nile blue A. The abundance of acetate-utilizing organisms without PHA accumulation was also calculated from the outcomes. The estimate of acetate utilized by PHAAOs included both the acetate converted to PHA and that used to supply reducing power and ATP. Acetate utilized by PHAAOs and non-PHAAOs were divided by their respective abundances to obtain their respective specific acetate uptake rates: PHAAOs ranged between 5.3 and 8.0 × 10−10 mgC cell−1 h−1, and non-PHAAOs ranged between 2.8 and 4.2 × 10−10 mgC cell−1 h−1.

Enrichment and characterization of an anaerobic methyl ethyl ketoxime degrading culture from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor

1998 ◽  
Vol 37 (4-5) ◽  
pp. 95-98 ◽  
Author(s):  
Nancy G. Love ◽  
Mary E. Rust ◽  
Kathy C. Terlesky
Keyword(s):  
Energy Source ◽  
Activated Sludge ◽  
Electron Acceptor ◽  
Sequencing Batch Reactor ◽  
Enrichment Culture ◽  
Batch Reactor ◽  
Nitrification Inhibitor ◽  
Time Frame ◽  
Methyl Ethyl

An anaerobic enrichment culture was developed from an anoxic/anaerobic/aerobic activated sludge sequencing batch reactor using methyl ethyl ketoxime (MEKO), a potent nitrification inhibitor, as the sole carbon and energy source in the absence of molecular oxygen and nitrate. The enrichment culture was gradually fed decreasing amounts of biogenic organic compounds and increasing concentrations of MEKO over 23 days until the cultures metabolized the oxime as the sole carbon source; the cultures were maintained for an additional 41 days on MEKO alone. Turbidity stabilized at approximately 100 mg/l total suspended solids. Growth on selective media plates confirmed that the microorganisms were utilizing the MEKO as the sole carbon and energy source. The time frame required for growth indicated that the kinetics for MEKO degradation are slow. A batch test indicated that dissolved organic carbon decreased at a rate comparable to MEKO consumption, while sulfate was not consumed. The nature of the electron acceptor in anaerobic MEKO metabolism is unclear, but it is hypothesized that the MEKO is hydrolyzed intracellularly to form methyl ethyl ketone and hydroxylamine which serve as electron donor and electron acceptor, respectively.

Excess nitrogen accumulation in activated sludge in sequencing batch reactor with a single-stage oxic process

2009 ◽  
Vol 59 (3) ◽  
pp. 573-582 ◽  
Author(s):  
Xiao-ming Li ◽  
Dong-bo Wang ◽  
Qi Yang ◽  
Wei Zheng ◽  
Jian-bin Cao ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Ph Value ◽  
Batch Reactor ◽  
Nitrogen Loss ◽  
Single Stage ◽  
Synthetic Wastewater ◽  
Nitrogen Accumulation ◽  
Excess Nitrogen

It was occasionally found that a significant nitrogen loss in solution under neutral pH value in a sequencing batch reactor with a single-stage oxic process using synthetic wastewater, and then further studies were to verify the phenomenon of nitrogen loss and to investigate the pathway of nitrogen removal. The result showed that good performance of nitrogen removal was obtained in system. 0–7.28 mg L−1 ammonia, 0.08–0.38 mg L−1 nitrite and 0.94–2.12 mg L−1 nitrate were determined in effluent, respectively, when 29.85–35.65 mg L−1 ammonia was feeding as the sole nitrogen source in influent. Furthermore, a substantial nitrogen loss in solution (95% of nitrogen influent) coupled with a little gaseous nitrogen increase in off-gas (7% of nitrogen influent) was determined during a typical aerobic phase. In addition, about 322 mg nitrogen accumulation (84% of nitrogen influent) was detected in activated sludge. Based on nitrogen mass balance calculation, the unaccounted nitrogen fraction and the ratio of nitrogen accumulation in sludge/nitrogen loss in solution were 14.6 mg (3.7% of nitrogen influent) and 0.89, respectively. The facts indicated that the essential pathway of nitrogen loss in solution in this study was excess nitrogen accumulation in activated sludge.

Advanced Treatment of Domestic Wastewater Using Sequencing Batch Reactor Activated Sludge Process

1993 ◽  
Vol 28 (10) ◽  
pp. 267-274 ◽  
Author(s):  
M. Imura ◽  
E. Suzuki ◽  
T. Kitao ◽  
S. Iwai
Keyword(s):  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Domestic Wastewater ◽  
Experimental Period ◽  
Small Scale ◽  
Experimental Plant ◽  
Activated Sludge Process ◽  
Nitrogen And Phosphorus ◽  
Experimental Apparatus

In order to apply a sequencing batch reactor activated sludge process to small scale treatment facilities, various experiments were conducted by manufacturing an experimental apparatus made of a factory-produced FRP cylinder transverse tank (Ø 2,500mm). Results of the verification test conducted for one year by leading the wastewater discharged from apartment houses into the experimental apparatus were as follows. Excellent performance was achieved without any addition of carbon source, irrespective of the organic compound concentration and the temperature of raw wastewater. Organic substances, nitrogen and phosphorus were removed simultaneously. Due to the automated operation format, stable performance was obtained with only periodic maintenance. Though water depth of the experimental plant was shallow, effective sedimentation of activated sludge was continued during the experimental period. Regarding the aerobic and anaerobic process, nitrification and denitrification occurred smoothly.

scholarly journals Dynamic control of nutrient-removal from industrial wastewater in a sequencing batch reactor, using common and low-cost online sensors

2015 ◽  
Vol 73 (4) ◽  
pp. 740-745 ◽  
Author(s):  
Jan Dries
Keyword(s):  
Activated Sludge ◽  
Nutrient Removal ◽  
Industrial Wastewater ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Low Cost ◽  
Dynamic Control ◽  
Oxygen Demand ◽  
Oxidation Reduction ◽  
Oxidation Reduction Potential

On-line control of the biological treatment process is an innovative tool to cope with variable concentrations of chemical oxygen demand and nutrients in industrial wastewater. In the present study we implemented a simple dynamic control strategy for nutrient-removal in a sequencing batch reactor (SBR) treating variable tank truck cleaning wastewater. The control system was based on derived signals from two low-cost and robust sensors that are very common in activated sludge plants, i.e. oxidation reduction potential (ORP) and dissolved oxygen. The amount of wastewater fed during anoxic filling phases, and the number of filling phases in the SBR cycle, were determined by the appearance of the ‘nitrate knee’ in the profile of the ORP. The phase length of the subsequent aerobic phases was controlled by the oxygen uptake rate measured online in the reactor. As a result, the sludge loading rate (F/M ratio), the volume exchange rate and the SBR cycle length adapted dynamically to the activity of the activated sludge and the actual characteristics of the wastewater, without affecting the final effluent quality.

Rapid quantification of polyhydroxyalkanoates (PHA) concentration in activated sludge with the fluorescent dye Nile blue A

2011 ◽  
Vol 64 (3) ◽  
pp. 747-753 ◽  
Author(s):  
M. Oshiki ◽  
H. Satoh ◽  
T. Mino
Keyword(s):  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Nile Blue ◽  
Maximum Level ◽  
Fluorescence Measurement ◽  
Batch Reactors ◽  
Floc Size ◽  
Nile Blue A ◽  
On Line ◽  
Rapid Quantification

The present study was conducted (1) to develop a rapid quantification method of polyhydroxyalkanoates (PHA) concentration in activated sludge by Nile blue A staining and fluorescence measurement and (2) to perform on-line monitoring of PHA concentrations in activated sludge. Activated sludge samples collected from laboratory scale sequencing batch reactors and full-scale wastewater treatment plants were stained with Nile blue A and their fluorescence intensities were determined. There was a high correlation (R2 > 0.97) between the fluorescence intensities of Nile blue A and PHA concentrations in activated sludge determined by gas chromatography. The Nile blue A staining and fluorescence measurement method allows us to determine PHA concentrations in activated sludge within only five minutes and up to 96 samples can be measured at once by using microplate reader. On-line monitoring of PHA concentrations in activated sludge was achieved by using a fluorometer equipped with a flow cell and the time point at which PHA concentration in activated sludge reached the maximum level could be identified. In addition, we examined the influence of pH, floc size and co-existing chemicals in activated sludge suspension on the fluorescence intensities of Nile blue A.

The impact of powdered keramsite on activated sludge and wastewater treatment in a sequencing batch reactor

2019 ◽  
Vol 237 ◽  
pp. 305-312 ◽  
Author(s):  
Adam Masłoń ◽  
Janusz A. Tomaszek ◽  
Justyna Zamorska ◽  
Monika Zdeb ◽  
Adam Piech ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
The Impact

Phosphorus release and uptake during start-up of a covered and non-aerated sequencing batch reactor with separate feeding of VFA and sulfate

2012 ◽  
Vol 65 (5) ◽  
pp. 840-844 ◽  
Author(s):  
D. Wu ◽  
T. Hao ◽  
H. Lu ◽  
H. K. Chui ◽  
M. C. M. van Loosdrecht ◽  
...  
Keyword(s):  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
P Uptake ◽  
Sulfur Cycle ◽  
Biological Phosphorus Removal ◽  
P Release ◽  
Start Up ◽  
Uptake Rates ◽  
Biological Phosphorus ◽  
P Removal

This study explored a sulfur cycle-associated biological phosphorus (P) removal process in a covered and non-aerated sequencing batch reactor (SBR) fed with volatile fatty acid (VFA) and sulfate separately. During the 60-day start-up, both phosphate release and uptake rates increased, while poly-phosphate cyclically increased and decreased accordingly. The P-release and P-uptake rates were associated with VFA uptake and sulfate reduction. The average ratio of potassium to phosphate during the P-uptake and P-release was also determined to be 0.29–0.31 mol K/mol P, which is close to a reported value (0.33) for biological phosphorus removal. All this evidence confirmed there was biological P removal in this reactor, in which metabolism could be different from conventional biological P removal.

Sign in / Sign up

Export Citation Format

Share Document