WEF/WERF study of BNR plants achieving very low N and P limits: evaluation of technology performance and process reliability

2012 ◽  
Vol 65 (5) ◽  
pp. 808-815 ◽  
Author(s):  
Charles B. Bott ◽  
Denny S. Parker ◽  
Jose Jimenez ◽  
Mark W. Miller ◽  
J. B. Neethling
Keyword(s):  
Nutrient Removal ◽  
Information Exchange ◽  
New Technologies ◽  
Wastewater Treatment Plants ◽  
Water Environment ◽  
Decision Makers ◽  
Process Reliability ◽  
Performance Statistics ◽  
Real World Situation ◽  
Operational Data

The Water Environment Research Foundation (WERF) funded a two-year comprehensive study of nutrient removal plants designed and operated to meet very low effluent total nitrogen (TN) and total phosphorus (TP) concentrations. WERF worked with the Water Environment Federation (WEF) to solicit participation of volunteers and provide a forum for information exchange at workshops at its annual conferences. Both existing and new technologies are being adapted to meet requirements that are as low as 3.0 mg/L TN and 0.1 mg/L TP, and there is a need to define their capabilities and reliabilities in the real world situation of wastewater treatment plants. A concern over very low daily permits for ammonia caused the work to be extended to include nitrification reliability. This effort focused on maximizing what can be learned from existing technologies in order to provide a database that will inform key decision makers about proper choices for both technologies and rationale bases for statistical permit writing. To this end, managers of 22 plants, 10 achieving low effluent TP, nine achieving low effluent TN, and three achieving low effluent NH3-N, provided three years of operational data that were analyzed using a consistent statistical approach. Technology Performance Statistics (TPSs) were developed as three separate values representing the ideal, median, and reliably achievable performance. Technological conclusions can be drawn from the study in terms of what can be learned by comparing the different nutrient removal and nitrification processes employed at these 22 plants.

scholarly journals The Microbial Database for Danish wastewater treatment plants with nutrient removal (MiDas-DK) – a tool for understanding activated sludge population dynamics and community stability

2013 ◽  
Vol 67 (11) ◽  
pp. 2519-2526 ◽  
Author(s):  
A. T. Mielczarek ◽  
A. M. Saunders ◽  
P. Larsen ◽  
M. Albertsen ◽  
M. Stevenson ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Amplicon Sequencing ◽  
Temporal Variations ◽  
Full Scale ◽  
16S Rrna Amplicon Sequencing ◽  
Specific Factors ◽  
Operational Data

Since 2006 more than 50 Danish full-scale wastewater treatment plants with nutrient removal have been investigated in a project called ‘The Microbial Database for Danish Activated Sludge Wastewater Treatment Plants with Nutrient Removal (MiDas-DK)’. Comprehensive sets of samples have been collected, analyzed and associated with extensive operational data from the plants. The community composition was analyzed by quantitative fluorescence in situ hybridization (FISH) supported by 16S rRNA amplicon sequencing and deep metagenomics. MiDas-DK has been a powerful tool to study the complex activated sludge ecosystems, and, besides many scientific articles on fundamental issues on mixed communities encompassing nitrifiers, denitrifiers, bacteria involved in P-removal, hydrolysis, fermentation, and foaming, the project has provided results that can be used to optimize the operation of full-scale plants and carry out trouble-shooting. A core microbial community has been defined comprising the majority of microorganisms present in the plants. Time series have been established, providing an overview of temporal variations in the different plants. Interestingly, although most microorganisms were present in all plants, there seemed to be plant-specific factors that controlled the population composition thereby keeping it unique in each plant over time. Statistical analyses of FISH and operational data revealed some correlations, but less than expected. MiDas-DK (www.midasdk.dk) will continue over the next years and we hope the approach can inspire others to make similar projects in other parts of the world to get a more comprehensive understanding of microbial communities in wastewater engineering.

Sludge minimization by disintegration at different wastewater treatment plants

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Luchien Luning ◽  
Paul Roeleveld ◽  
Victor W.M. Claessen
Keyword(s):  
Organic Matter ◽  
Wastewater Treatment ◽  
Anaerobic Digestion ◽  
Sewage Sludge ◽  
New Technologies ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Biological Degradation ◽  
Ongoing Research ◽  
Sludge Minimization

In recent years new technologies have been developed to improve the biological degradation of sewage sludge by anaerobic digestion. The paper describes the results of a demonstration of ultrasonic disintegration on the Dutch Wastewater Treatment Plant (WWTP) Land van Cuijk. The effect on the degradation of organic matter is presented, together with the effect on the dewatering characteristics. Recommendations are presented for establishing research conditions in which the effect of sludge disintegration can be determined in a more direct way that is less sensitive to changing conditions in the operation of the WWTP. These recommendations have been implemented in the ongoing research in the Netherlands supported by the National Institute for wastewater research (STOWA).

Upgrading Wastewater Treatment Plants for Biological Nutrient Removal

1990 ◽  
Vol 22 (7-8) ◽  
pp. 53-60 ◽  
Author(s):  
B. Rabinowitz ◽  
T. D. Vassos ◽  
R. N. Dawson ◽  
W. K. Oldham
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Design Flow ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Conventional Activated Sludge ◽  
Recent Developments ◽  
Removal Technology ◽  
Biological Nitrogen

A brief review of recent developments in biological nitrogen and phosphorus removal technology is presented. Guidelines are outlined of how current understanding of these two removal mechanisms can be applied in the upgrading of existing wastewater treatment plants for biological nutrient removal. A case history dealing with the upgrading of the conventional activated sludge process located at Penticton, British Columbia, to a biological nutrient removal facility with a design flow of 18,200 m3/day (4.0 IMGD) is presented as a design example. Process components requiring major modification were the headworks, bioreactors and sludge handling facilities.

Nutrient Removal in Small Wastewater Treatment Plants

1990 ◽  
Vol 22 (3-4) ◽  
pp. 211-216
Author(s):  
Niels Skov Olesen
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Nutrient Removal ◽  
Phosphorus Removal ◽  
Wastewater Treatment Plants ◽  
Ferrous Sulphate ◽  
Practical Solution ◽  
Sensitive Technique ◽  
Pumping Station ◽  
Denitrification Reactor

In some areas of Denmark nutrient removal is required even for very small wastewater plants, that is down to 500 pe (pe = person equivalents). The goal for the removal is 80% removal of nitrogen and 90% removal of phosphorus, or in terms of concentrations: 8 mg nitrogen/l and 1.2 mg phosphorus/l. The inlet concentrations are typically 40 mg N/l and 10 mg P/l. The paper presents the results from two such plants with a capacity of 800 pe. Phosphorus removal is made by simultaneous precipitation with ferrous sulphate. Nitrogen removal is carried out using the recirculation method. Both plants were originally rotor aerated oxidation ditches. They have been extended with a denitrification reactor and a recirculation pumping station. At present both plants have been in activity for about 3 years and with satisfactory results. Average concentrations of nitrogen (summer) and phosphorus is 7 mg/l and 0.9 mg/l respectively. Nitrogen removal seems to be a practical solution on these small plants. It is,though, sensitive to temperature and highly oxidized rain water. Phosphorus removal seems to be an easily run and relatively non-sensitive technique at least when using simultaneous precipitation.

Experience with nutrient removal in a fixed-film system at full-scale wastewater treatment plants

1997 ◽  
Vol 36 (1) ◽  
pp. 129-137 ◽  
Author(s):  
Vibeke R. Borregaard
Keyword(s):  
Wastewater Treatment ◽  
Surface Area ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
High Specific Surface Area ◽  
Biological Nutrient Removal ◽  
Growth Processes ◽  
Total N ◽  
Attached Growth ◽  
On Line

In the upgrade of wastewater treatment plants to include biological nutrient removal the space available is often a limiting facor. It may be difficult to use conventional suspended growth processes (i.e. activated sludge) owing to the relatively large surface area required for these processes. Recent years have therefore seen a revived interest in treatment technologies using various types of attached growth processes. The “new” attached growth processes, like the Biostyr process, utilise various kinds of manufactured media, e.g. polystyrene granules, which offer a high specific surface area, and are therefore very compact. The Biostyr plants allow a combination of nitrification-denitrification and filtration in one and the same unit. The results obtained are 8 mg total N/l and an SS content normally below 10 mg/l. The plants in Denmark which have been extended with a Biostyr unit have various levels of PLC control and on-line instrumentation.

Expenditure on the operation of municipal wastewater treatment plants for nutrient removal

2000 ◽  
Vol 41 (9) ◽  
pp. 281-289 ◽  
Author(s):  
O. Nowak
Keyword(s):  
Nutrient Removal ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
General Scheme ◽  
Operating Costs ◽  
Municipal Wastewater Treatment ◽  
Wastewater Purification ◽  
Labour Costs ◽  
Municipal Wastewater Treatment Plants ◽  
P Removal

Operating costs of Austrian municipal treatment plants are evaluated for 1989/90 and for 1997, respectively. The results indicate that presently the expenses which can be directly connected to wastewater purification, i.e. energy and chemicals for P removal, comprise only about 20% of the total operating costs. Today, in Austria like in other EU countries, the predominating factor is “labour costs”, even at nutrient removal plants. A general scheme for estimating operating costs is presented that can be applied to WWTPs in other parts of the world. In this scheme the important factors relevant to the operating costs are integrated.

scholarly journals Biological Nutrient Removal Model No. 2 (BNRM2): a general model for wastewater treatment plants

2013 ◽  
Vol 67 (7) ◽  
pp. 1481-1489 ◽  
Author(s):  
R. Barat ◽  
J. Serralta ◽  
M. V. Ruano ◽  
E. Jiménez ◽  
J. Ribes ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Operating Conditions ◽  
Plant Performance ◽  
Biological Nutrient Removal ◽  
Nitrite Oxidizing Bacteria ◽  
Removal Model

This paper presents the plant-wide model Biological Nutrient Removal Model No. 2 (BNRM2). Since nitrite was not considered in the BNRM1, and this previous model also failed to accurately simulate the anaerobic digestion because precipitation processes were not considered, an extension of BNRM1 has been developed. This extension comprises all the components and processes required to simulate nitrogen removal via nitrite and the formation of the solids most likely to precipitate in anaerobic digesters. The solids considered in BNRM2 are: struvite, amorphous calcium phosphate, hidroxyapatite, newberite, vivianite, strengite, variscite, and calcium carbonate. With regard to nitrogen removal via nitrite, apart from nitrite oxidizing bacteria two groups of ammonium oxidizing organisms (AOO) have been considered since different sets of kinetic parameters have been reported for the AOO present in activated sludge systems and SHARON (Single reactor system for High activity Ammonium Removal Over Nitrite) reactors. Due to the new processes considered, BNRM2 allows an accurate prediction of wastewater treatment plant performance in wider environmental and operating conditions.

scholarly journals Nitrogen and Phosphorous Removal in Municipal Wastewater Treatment Plants in China: A Review

2010 ◽  
Vol 2010 ◽  
pp. 1-10 ◽  
Author(s):  
Yong Qiu ◽  
Han-chang Shi ◽  
Miao He
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Batch Reactor ◽  
Water Environment ◽  
Optimization Techniques ◽  
Municipal Wastewater Treatment ◽  
Real Time Control ◽  
Operational Optimization ◽  
Municipal Wastewater Treatment Plants

Surface water environment in China was degraded rapidly in the last two decades, resulting in increasingly tighten criteria issued for municipal wastewater treatment plants (WWTPs). This paper reviewed the recent advances of process design and operational optimization for nutrients removal. Three major processes, as anaerobic-anoxic-oxic (AAO) process, oxidation ditch (OD), and sequencing batch reactor (SBR) occupied 65% of WWTPs amounts and 54% of treatment volumes of China in 2006. However conservative process designs and operational faults often impaired the process performances and energy efficiency. Therefore, typical processes were modified, combined, and innovated to meet the requirements of the diverse influent characteristics and lower energy consumptions. Furthermore, operational optimization techniques by modeling, simulation, and real-time control were also developed and applied in China to improve the process operation. Although great efforts had been contributed to improve the WWTPs performances in China, attentions should be continuously paid to the introduction, instruction, and implementation of advanced techniques. At last, the technical demands and appropriated techniques of WWTPs in China were briefly discussed.

Sign in / Sign up

Export Citation Format

Share Document