scholarly journals Energetic flexibility on wastewater treatment plants

2017 ◽  
Vol 76 (5) ◽  
pp. 1225-1233 ◽  
Author(s):  
M. Schäfer ◽  
I. Hobus ◽  
T. G. Schmitt
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Energy Systems ◽  
Energy Market ◽  
Control Parameters ◽  
Effluent Quality ◽  
The Future ◽  
Energy Consuming ◽  
Characteristic Values ◽  
And Control

In the future, an additional potential of control reserve as well as storage capacities will be required to compensate fluctuating renewable energy availability. The operation of energy systems will change and flexibility in energy generation and consumption will rise to a valuable asset. Wastewater treatment plants (WWTPs) are capable of providing the flexibility needed, not only with their energy generators but also in terms of their energy consuming aggregates on the plant. To meet challenges of the future in regard to energy purchase and to participate in and contribute to such a volatile energy market, WWTPs have to reveal their energetic potential as a flexible service provider. Based on the evaluated literature and a detailed analysis of aggregates on a pilot WWTP an aggregate management has been developed to shift loads and provide a procedure to identify usable aggregates, characteristic values and control parameters to ensure effluent quality. The results show that WWTPs have a significant potential to provide energetic flexibility. Even for vulnerable components such as aeration systems, load-shifting is possible with appropriate control parameters and reasonable time slots without endangering system functionality.

Danish Experience with Emergent Hydrophyte Treatment Systems (EHTS) and Prospects in the Light of Future Requirements on Outlet Water Quality

1990 ◽  
Vol 22 (3-4) ◽  
pp. 65-72 ◽  
Author(s):  
H.-H. Schierup ◽  
H. Brix
Keyword(s):  
Wastewater Treatment ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Wastewater Treatment Plants ◽  
Sewage Treatment ◽  
Reed Beds ◽  
Effluent Quality ◽  
Multi Stage ◽  
Run Off ◽  
Stage System

Since 1983 approximately 150 full-scale emergent hydrophyte based wastewater treatment plants (reed beds) have been constructed in Denmark to serve small wastewater producers. The development of purification performance for 21 plants representing different soil types, vegetation, and hydraulic loading rates has been recorded. Cleaning efficiencies were typically in the range of 60-80% reduction for BOD, 25-50% reduction for total nitrogen, and 20-40% reduction for total phosphorus. The mean effluent BOD, total nitrogen and total phosphorus concentrations of the reed beds were 19 ± 10, 22 ± 9 and 6.7 ± 3.2 mg/l (mean ± SD), respectively. Thus, the general Danish effluent standards of 8 mg/l for N and 1.5 mg/l for P for sewage plants greater than 5,000 PE cannot be met by the present realised design of EHTS. The main problem observed in most systems is a poor development of horizontal hydraulic conductivity in the soil which results in surface run-off. Since the political demands for effluent quality will be more strict in the future, it is important to improve the performance of small decentral sewage treatment plants. On the basis of experiences from different types of macrophyte based and conventional low-technology wastewater treatment systems, a multi-stage system is suggested, consisting of sedimentation and sand filtration facilities followed by basins planted with emergent and submergent species of macrophytes and algal ponds.

Automatic buffer capacity based sensor for effluent quality monitoring

1996 ◽  
Vol 33 (1) ◽  
pp. 81-87
Author(s):  
L. Van Vooren ◽  
P. Willems ◽  
J. P. Ottoy ◽  
G. C. Vansteenkiste ◽  
W. Verstraete
Keyword(s):  
Wastewater Treatment ◽  
Buffer Capacity ◽  
Wastewater Treatment Plants ◽  
Data Interpretation ◽  
Full Scale ◽  
Quality Monitoring ◽  
Effluent Quality ◽  
Capacity Curves ◽  
On Line

The use of an automatic on-line titration unit for monitoring the effluent quality of wastewater plants is presented. Buffer capacity curves of different effluent types were studied and validation results are presented for both domestic and industrial full-scale wastewater treatment plants. Ammonium and ortho-phosphate monitoring of the effluent were established by using a simple titration device, connected to a data-interpretation unit. The use of this sensor as the activator of an effluent quality proportional sampler is discussed.

Evaluation of Small Wastewater Treatment Plants in the County of Århus – Denmark

1993 ◽  
Vol 28 (10) ◽  
pp. 33-41
Author(s):  
Jes la Cour Jansen ◽  
Bodil Mose Pedersen ◽  
Erik Moldt
Keyword(s):  
Wastewater Treatment ◽  
Constructed Wetlands ◽  
Biological Treatment ◽  
Wastewater Treatment Plants ◽  
Chemical Precipitation ◽  
Common Type ◽  
Treatment Efficiency ◽  
Effluent Quality ◽  
Different Types

Influent and effluent data from about 120 small wastewater treatment plants (100 - 2000 PE) have been collected and processed. Seven different types of plants are represented. The effluent quality and the treatment efficiency have been evaluated. The most common type of plant is mechanical/biological treatment plants. Some of them are nitrifying and some are also extended for chemical precipitation of phosphorus. Constructed wetlands and biological sandfilters are also represented among the small wastewater treatment plants.

Performance evaluation of different wastewater treatment technologies operating in a developing country

2011 ◽  
Vol 1 (1) ◽  
pp. 37-56 ◽  
Author(s):  
Sílvia C. Oliveira ◽  
Marcos von Sperling
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Septic Tank ◽  
Operational Parameters ◽  
Technical Literature ◽  
Effluent Quality ◽  
Loading Rates ◽  
Treatment Processes ◽  
Treatment Technologies ◽  
Uasb Reactors

This article analyses the performance of 166 wastewater treatment plants operating in Brazil, comprising six different treatment processes: septic tank + anaerobic filter, facultative pond, anaerobic pond + facultative pond, activated sludge, UASB reactors alone, UASB reactors followed by post-treatment. The study evaluates and compares the observed effluent quality and the removal efficiencies in terms of BOD, COD, TSS, TN, TP and FC with typical values reported in the technical literature. In view of the large performance variability observed, the existence of a relationship between design/operational parameters and treatment performance was investigated. From the results obtained, no consistent relationship between loading rates and effluent quality was found. The influence of loading rates differed from plant to plant, and the effluent quality was dictated by several combined factors related to design and operation.

Influence of Hydraulic Loading Rate on Horizontal Zeolite Wetland Effluent Quality

2012 ◽  
Vol 573-574 ◽  
pp. 659-662
Author(s):  
Hao Wang
Keyword(s):  
Wastewater Treatment ◽  
Loading Rate ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Secondary Effluent ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Hydraulic Loading Rate ◽  
Effluent Quality ◽  
Hydraulic Loading

In Tangshan area, the secondary effluent of wastewater treatment plants was used for this study. Horizontal zeolite wetland was carried out treating it. Hydraulic loading rate was the parameters for analyzing the nitrogen and phosphorus removal efficiency of pollutants from the secondary effluent of wastewater treatment plant. Zeolite constructed wetlands showed different behaviors for nitrogen and phosphorus removals.Under the optimum hydraulic loading rate, the primary pollutions were removed to a large extent.

scholarly journals Bacteria from the Genus Arcobacter Are Abundant in Effluent from Wastewater Treatment Plants

2020 ◽  
Vol 86 (9) ◽  
Author(s):  
Jannie Munk Kristensen ◽  
Marta Nierychlo ◽  
Mads Albertsen ◽  
Per Halkjær Nielsen
Keyword(s):  
Wastewater Treatment ◽  
Pathogenic Bacteria ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Amplicon Sequencing ◽  
Rrna Gene ◽  
Content Type ◽  
Effluent Quality ◽  
Culture Independent ◽  
Influent Wastewater

ABSTRACT Pathogenic bacteria in wastewater are generally considered to be efficiently removed in biological wastewater treatment plants. This understanding is almost solely based on culture-based control measures, and here we show, by applying culture-independent methods, that the removal of species in the genus Arcobacter was less effective than for many other abundant genera in the influent wastewater. Arcobacter was one of the most abundant genera in influent wastewater at 14 municipal wastewater treatment plants and was also abundant in the “clean” effluent from all the plants, reaching up to 30% of all bacteria as analyzed by 16S rRNA gene amplicon sequencing. Metagenomic analyses, culturing, genome sequencing of Arcobacter isolates, and visualization by fluorescent in situ hybridization (FISH) confirmed the presence of the human-pathogenic Arcobacter cryaerophilus and A. butzleri in both influent and effluent. The main reason for the high relative abundance in the effluent was probably that Arcobacter cells, compared to those of other abundant genera in the influent, did not flocculate and attach well to the activated sludge flocs, leaving a relatively large fraction dispersed in the water phase. The study shows there is an urgent need for new standardized culture-independent measurements of pathogens in effluent wastewaters, e.g., amplicon sequencing, and an investigation of the problem on a global scale to quantify the risk for humans and livestock. IMPORTANCE The genus Arcobacter was unexpectedly abundant in the effluent from 14 Danish wastewater treatment plants treating municipal wastewater, and the species included the human-pathogenic A. cryaerophilus and A. butzleri. Recent studies have shown that Arcobacter is common in wastewater worldwide, so the study indicates that discharge of members of the genus Arcobacter may be a global problem, and further studies are needed to quantify the risk and potentially minimize the discharge. The study also shows that culture-based analyses are insufficient for proper effluent quality control, and new standardized culture-independent measurements of effluent quality encompassing most pathogens should be considered.

Performance of a combined eco-system of ponds and constructed wetlands for wastewater reclamation and reuse

2005 ◽  
Vol 51 (12) ◽  
pp. 315-323 ◽  
Author(s):  
L. Wang ◽  
J. Peng ◽  
B. Wang ◽  
R. Cao
Keyword(s):  
Wastewater Treatment ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
National Standards ◽  
Municipal Wastewater Treatment ◽  
Wastewater Reclamation ◽  
Effluent Quality ◽  
Major Mechanism ◽  
Removal Efficiencies ◽  
Municipal Wastewater Treatment Plants

An on-site study on the operational performance of a combined eco-system of ponds and SF constructed wetland for municipal wastewater treatment and reclamation/reuse in Donging City, Shandong, China was carried out from January 2001 through October 2003. The removal efficiencies for various main parameters were: TSS 84.8±7.3%, BOD5 87.2±5.3%, CODCr 70.2±18.6%, TP 52.3±23.1%, and NH3-N 54.8±23.9% with effluent concentration of TSS 9.12±5.12 mg/l, BOD5 6.44±4.58 mg/l, CODCr 42.8±6.7 mg/l, TP 0.94±0.27 mg/l and NH3-N 7.95±2.36 mg/l. In addition, the removal efficiencies for faecal coliforms and total bacteria were >99.97% and >99.998% respectively, which well meet Chinese National standards for effluent quality of municipal wastewater treatment plants. The composition of TSS was closely related to CODCr and BOD5 variations, and nitrification-denitrification is the major mechanism of nitrogen removal both in ponds and in wetlands. In addition, sedimentation also played an important role in the removal of TSS, nitrogen, phosphorus and BOD5. The removal efficiencies of various parameters, the number of species and biomass of biological community in the system increased gradually with the ecological maturation.

Nitrogen removal by recycle water nitritation as an attractive alternative for retrofit technologies in municipal wastewater treatment plants

2004 ◽  
Vol 49 (5-6) ◽  
pp. 39-46 ◽  
Author(s):  
K.-I. Gil ◽  
E. Choi
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Biological Nutrient Removal ◽  
Recycle Water ◽  
Municipal Wastewater Treatment ◽  
Effluent Quality ◽  
Municipal Wastewater Treatment Plants ◽  
Final Effluent

The recycle water from sludge processing in municipal wastewater treatment plants causes many serious problems in the efficiency and stability of the mainstream process. Thus, the design approach for recycle water is an important part of any biological nutrient removal system design when a retrofit technology is required for upgrading an existing plant. Moreover, the application of nitrogen removal from recycle water using the nitritation process has recently increased due to economic reasons associated with an effective carbon allocation as well as the minimization of aeration costs. However, for the actual application of recycle water nitritation, it has not been fully examined whether or not additional volume would be required in an existing plant. In this paper, the addition of recycle water nitritation to an existing plant was evaluated based on a volume analysis and estimation of final effluent quality. It was expected that using the reserve volume of the aeration tank in existing plants, recycle water nitritation could be applied to a plant without any enlargement. With the addition of recycle water nitritation, it was estimated that the final effluent quality would be improved and stabilized, especially in the winter season.

Sign in / Sign up

Export Citation Format

Share Document