Mannosylated Solid Lipid Nanocarriers Of Chrysin To Target Gastric Cancer: Optimization and Cell line Study.

2021 ◽  
Vol 18 ◽  
Author(s):  
Sonia S. Pandey ◽  
Farhinbanu I. Shaikh ◽  
Arti R. Gupta ◽  
Rutvi J. Vaidya
Keyword(s):  
Gastric Cancer ◽  
Particle Size ◽  
Ex Vivo ◽  
Biological Effects ◽  
Entrapment Efficiency ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Lipid Nanocarriers

Background: Despite significant biological effects, the clinical use of chrysin has been restricted because of its poor oral bioavailability. Objective: The purpose of the present research was to investigate the targeting potential of Mannose decorated chrysin (5,7- dihydroxyflavone) loaded solid lipid nanocarrier (MC-SLNs) for gastric cancer. Methods: The Chrysin loaded SLNs (C-SLNs) were developed optimized, characterized and further mannosylated. The C-SLNs were developed with high shear homogenizer, optimized with 32 full factorial designs and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) and evaluated for particle size/polydispersity index, zeta-potential, entrapment efficiency, % release and haemolytic toxicity. The ex-vivo cytotoxicity study was performed on gastric cancer (ACG) and normal cell lines. Results: DSC and XRD data predict the chrysin encapsulation in lipid core and FTIR results confirm the mannosylation of C-SLNs. The optimized C-SLNs exhibited a narrow size distribution with a particle size of 285.65 nm. The % Entrapment Efficiency (%EE) and % controlled release were found to be 74.43% and 64.83%. Once C-SLNs were coated with mannose, profound change was observed in dependent variable - increase in the particle size of MC-SLNs (307.1 nm) was observed with 62.87% release and 70.8% entrapment efficiency. Further, the in vitro studies depicted MC- SLNs to be least hemolytic than pure chrysin and C-SLNs. MC-SLNs were most cytotoxic and were preferably taken up ACG tumor cells as evaluated against C-SLNs. Conclusion: These data suggested that the MC-SLNs demonstrated better biocompatibility and targeting efficiency to treat the gastric cancer.

Design and Optimization of Itraconazole Loaded SLN for Intranasal Administration Using Central Composite Design

2020 ◽  
Vol 10 (6) ◽  
pp. 884-891
Author(s):  
Sarvjeet S. Rana ◽  
Shailendra Bhatt ◽  
Manish Kumar ◽  
Anuj Malik ◽  
Jai B. Sharma ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Intranasal Administration ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Ex Vivo Study ◽  
Central Composite

Introduction: Solid Lipid nanoparticles (SLN) are comprising of a solid lipid core with a mean diameter between 50 and 1000 nm. SLN is an advanced carrier system to traditional colloidal carriers such as emulsion, liposomes, and polymeric microparticles. Objective: The objective of this study was to formulate SLN of Itraconazole (ITZ) for intranasal administration. Methods: ITZ-loaded SLN were prepared by high pressure homogenization technique using the Central Composite Design (CCD). The concentration of surfactant (X1) and drug to lipid ratio (X2) was considered as independent variables, whereas particle size (Y1) and percentage entrapment efficiency (Y2) were considered as a response. The compatibility of ingredients with the drug was tested using differential scanning calorimetry. SLN were characterized for their particle size, entrapment efficiency, transmission electron microscopy, in vitro drug release, and ex vivo study. Results: The solid lipid nanoparticles were successfully prepared using high pressure homogenization technique and glyceryl monostearate was used as solid lipid. The lipid ratio significantly increases the particle size as well as entrapment efficiency. The particle size and (%) entrapment efficiency of optimized formulation were found to be 29 nm and 78.9%, respectively. The differential scanning calorimetry confirmed that the drug existed in amorphous form. Nasal histopathology study on sheep mucosa revealed that the developed SLN was non-toxic and safe to use for intranasal administration. The results of ex vivo study showed that the Higuchi pattern of drug release was followed. The in vitro release studies showed the significant difference in drug release from ITZ-loaded SLN compared to plain ITZ-solution. Conclusion: ITZ-loaded SLN were successfully prepared and validated. The best batch was selected based on the desired particle size, and EE which is an important characteristic for SLN formulations. The developed formulations were nontoxic as determined by histo-pathological studies.

scholarly journals Statistical optimization of dithranol-loaded solid lipid nanoparticles using factorial design

2011 ◽  
Vol 47 (3) ◽  
pp. 503-511 ◽  
Author(s):  
Makarand Suresh Gambhire ◽  
Mangesh Ramesh Bhalekar ◽  
Vaishali Makarand Gambhire
Keyword(s):  
Particle Size ◽  
Factorial Design ◽  
Solid Lipid Nanoparticles ◽  
Ex Vivo ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Average Particle ◽  
Scanning Calorimetry ◽  
Solid Lipid

This study describes a 3² full factorial experimental design to optimize the formulation of dithranol (DTH) loaded solid lipid nanoparticles (SLN) by the pre-emulsion ultrasonication method. The variables drug: lipid ratio and sonication time were studied at three levels and arranged in a 3² factorial design to study the influence on the response variables particle size and % entrapment efficiency (%EE). From the statistical analysis of data polynomial equations were generated. The particle size and %EE for the 9 batches (R1 to R9) showed a wide variation of 219-348 nm and 51.33- 71.80 %, respectively. The physical characteristics of DTH-loaded SLN were evaluated using a particle size analyzer, differential scanning calorimetry and X-ray diffraction. The results of the optimized formulation showed an average particle size of 219 nm and entrapment efficiency of 69.88 %. Ex-vivo drug penetration using rat skin showed about a 2-fold increase in localization of DTH in skin as compared to the marketed preparation of DTH.

Optimization of Itroconazole Solid Lipid Nanoparticles for Topical Delivery

2020 ◽  
Vol 10 (4) ◽  
pp. 381-389
Author(s):  
Pallavi M. Chaudhari ◽  
Amruta R. Patil
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Topical Delivery ◽  
Lipid Nanoparticles ◽  
X Ray Diffraction ◽  
High Concentration ◽  
Solid Lipid ◽  
Drug Entrapment Efficiency

Introduction: The objective of this study was to formulate water-insoluble drug Itraconazole (ITZ) into Solid Lipid Nanoparticles (SLNs) for topical delivery. Methods: The drug-loaded SLNs were prepared by Microemulsion method using cholesterol (CH) and Lubritab (LU) and further characterized for different parameters like particle size, zeta potential, drug entrapment efficiency etc. The mean particle size with Lubritab SLN was in the range 155.01-161.67 nm, whereas for Cholestrol SLN it was in the range of 218.87-230.16 nm. SEM showed spherical nature of the SLNs. Results: The entrapment efficiency of SLN was found to be more for cholesterol as compared to Lubritab. The crystalline properties of drug was reduced in SLNs as evaluated by X-ray diffraction (XRD). Ex vivo study indicated the ITZ-SLN exhibited high concentration. Conclusion: The permeability of drug was studied by use of Franz-diffusion cell, and permeation of drug through Lubritab SLN (ITZ LU) was higher than that of Cholesterol SLN (ITZ CH). The formulated ITZ-SLNs exhibited clear zone.

scholarly journals Preparation, in vitro and ex-vivo Evaluation of Mirtazapine Nanosuspension and Nanoparticles Incorporated in Orodispersible Tablets

2020 ◽  
Vol 29 (1) ◽  
pp. 62-75
Author(s):  
Hiba E. Hamed ◽  
Ahmed A. Hussein
Keyword(s):  
Particle Size ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Vinyl Pyrrolidone ◽  
Poloxamer 407 ◽  
Poly Vinyl Alcohol ◽  
Scanning Calorimetry ◽  
Enhanced Solubility

          The objective of the present investigation was to enhance the solubility of practically insoluble mirtazapine by preparing nanosuspension, prepared by using solvent anti solvent technology. Mirtazapine is practically insoluble in water which act as antidepressant .It was prepared as nano particles in order to improve its solubility and dissolution rate. Twenty formulas were prepared and different stabilizing agents were used with different concentrations such as poly vinyl pyrrolidone (PVPK-90), poly vinyl alcohol (PVA), poloxamer 188 and poloxamer 407. The ratios of drug to stabilizers used to prepare the nanoparticles were 1: 1 and 1:2. The prepared nanoparticles were evaluated for particle size, entrapment efficiency, dissolution study, Fourier transform infrared spectroscopy, differential scanning calorimetry, and atomic force microscopy. The percentage of drug entrapment efficiency of F1-F20 was ranged from 78.2% ± 1 to 95.9 % ± 1. The release rate and extent of mirtazapine  nanoparticles were inversely proportional to the particle size of the drug i.e. it decreased when particle size increase. It is concluded that the nanoprecipitation have potential to formulate homogenous nanosuspensions with uniform-sized stable nanoparticles of mirtazapine. The prepared nanosuspension showed enhanced dissolution which may lead to enhanced solubility of mirtazapine. 

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals Effect of Chitosan Coating on PLGA Nanoparticles for Oral Delivery of Thymoquinone: In Vitro, Ex Vivo, and Cancer Cell Line Assessments

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 6
Author(s):  
Sultan Alshehri ◽  
Syed Sarim Imam ◽  
Md Rizwanullah ◽  
Khalid Umar Fakhri ◽  
Mohd Moshahid Alam Rizvi ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Cancer Cell Line ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Cancer Management ◽  
Mcf 7

In the present study, thymoquinone (TQ)-encapsulated chitosan- (CS)-coated poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) were formulated using the emulsion evaporation method. NPs were optimized by using 33-QbD approach for improved efficacy against breast cancer. The optimized thymoquinone loaded chitosan coated Poly (d,l-lactide-co-glycolide) nanoparticles (TQ-CS-PLGA-NPs) were successfully characterized by different in vitro and ex vivo experiments as well as evaluated for cytotoxicity in MDA-MB-231 and MCF-7 cell lines. The surface coating of PLGA-NPs was completed by CS coating and there were no significant changes in particle size and entrapment efficiency (EE) observed. The developed TQ-CS-PLGA-NPs showed particle size, polydispersibility index (PDI), and %EE in the range between 126.03–196.71 nm, 0.118–0.205, and 62.75%–92.17%. The high and prolonged TQ release rate was achieved from TQ-PLGA-NPs and TQ-CS-PLGA-NPs. The optimized TQ-CS-PLGA-NPs showed significantly higher mucoadhesion and intestinal permeation compared to uncoated TQ-PLGA-NPs and TQ suspension. Furthermore, TQ-CS-PLGA-NPs showed statistically enhanced antioxidant potential and cytotoxicity against MDA-MB-231 and MCF-7 cells compared to uncoated TQ-PLGA-NPs and pure TQ. On the basis of the above findings, it may be stated that chitosan-coated TQ-PLGA-NPs represent a great potential for breast cancer management.

scholarly journals Preparation, characterization and scale-up of sesamol loaded solid lipid nanoparticles

2012 ◽  
Vol 2 (1) ◽  
pp. 8 ◽  
Author(s):  
Vandita Kakkar ◽  
Indu Pal Kaur
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Scale Up ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Transmission Electron ◽  
The Brain

Sesamol loaded solid lipid nanoparticles (SSLNs) were prepared with the aim of minimizing its distribution to tissues and achieving its targeting to the brain. Three scale-up batches (100x1 L) of S-SLNs were prepared using a microemulsification technique and all parameters were statistically compared with the small batch (1x;10 mL). S-SLNs with a particle size of less than 106 nm with a spherical shape (transmission electron microscopy) were successfully prepared with a total drug content and entrapment efficiency of 94.26±2.71% and 72.57±5.20%, respectively. Differential scanning calorimetry and infrared spectroscopy confirmed the formation of lipidic nanoparticles while powder X-ray diffraction revealed their amorphous profile. S-SLNs were found to be stable for three months at 5±3°C in accordance with International Conference on Harmonisation guidelines. The SLN preparation process was successfully scaled-up to a 100x batch on a laboratory scale. The procedure was easy to perform and allowed reproducible SLN dispersions to be obtained.

Sign in / Sign up

Export Citation Format

Share Document