scholarly journals Preparation and Evaluation of Multi-Particulate System (Pellets) of Prasugrel Hydrochloride

2015 ◽  
Vol 2 (1) ◽  
pp. 74-80 ◽  
Author(s):  
Navjot Kanwar ◽  
Rakesh Kumar ◽  
V.R. Sinha
Keyword(s):  
Moisture Content ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Fickian Diffusion ◽  
Narrow Particle Size Distribution ◽  
Crystalline Cellulose ◽  
Flow Properties ◽  
Drug Content

Multiparticulate systems (pellets) of prasugrel hydrochloride were prepared by extrusion spheronization method using MCC (micro crystalline cellulose). Optimum spheronization time and method of drying were selected as the process parameters for the preparation of final batches. Various pellet properties were evaluated like size & shape analysis, flow properties, bulk & tapped density, friability, moisture content, drug content, in vitro release rate and in vivo pharmacodynamic studies. All pellet batches showed a narrow particle size distribution, good sphericity and excellent flow properties. Drug content and moisture content of different pellet batches were found in specified limits. The release kinetics of drug loaded MCC pellets followed Peppas model with Fickian diffusion of prasugrel from the pellets. In vivo pharmacodynamic studies exhibited improved bleeding time in pellet group when compared with the marketed tablet formulation.

Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried β-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds

2012 ◽  
Vol 512-515 ◽  
pp. 1821-1825
Author(s):  
Lin Zhang ◽  
Xue Min Cui ◽  
Qing Feng Zan ◽  
Li Min Dong ◽  
Chen Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Cross Linking ◽  
Tissue Engineering Scaffolds ◽  
Composite Microspheres ◽  
Chitosan Composite ◽  
Vitro Release

A novel microsphere scaffolds composed of chitosan and β-TCP containing vancomycin was designed and prepared. The β-TCP/chitosan composite microspheres were prepared by solid-in-water-in-oil (s/w/o) emulsion cross-linking method with or without pre-cross-linking process. The mode of vancomycin maintaining in the β-TCP/chitosan composite microspheres was detected by Fourier transform infrared spectroscopy (FTIR). The in vitro release curve of vancomycin in simulated body fluid (SBF) was estimated. The results revealed that the pre-cross-linking prepared microspheres possessed higher loading efficiency (LE) and encapsulation efficiency (EE) especially decreasing the previous burst mass of vancomycin in incipient release. These composite microspheres got excellent sphere and well surface roughness in morphology. Vancomycin was encapsulated in composite microspheres through absorption and cross-linking. While in-vitro release curves illustrated that vancomycin release depond on diffusing firstly and then on the degradation ratio later. The microspheres loading with vancomycin would be to restore bone defect, meanwhile to inhibit bacterium proliferation. These bioactive, degradable composite microspheres have potential applications in 3D tissue engineering of bone and other tissues in vitro and in vivo.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

Quality by Design enabled anti-hypertensive Floating drug delivery system by Risk assessment and Design of Experiment (DoE) – In vitro – In vivo correlation studies

2021 ◽  
Vol 16 ◽  
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Risk Analysis ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Background: The present research aimed to develop and optimize extended-release floating tablets of Sacubitril and Valsartan through Quality by Design (QbD) approach. Risk analysis by formulation assessment and process parameters showed that optimizing the levels of the polymer will minimize high risk to meet the target profile. A two (2) level three (3) full factorial experimental design along with midpoints was carefully chosen for optimization and statistical analysis. Based on the literature, the independent and dependent variables were selected. Results: HPMC K100, Carbopol 934P had a positive effect, whereas Ethylcellulose had a negative effect on Floating time, drug release at 2 h, drug release at 12 h and, 50% responses. Drug release kinetics followed the first-order release with Higuchi and Fickian diffusion. Contour and overlay plots were utilized for an assortment of design space and optimized formula. ANOVA results of all the factors exhibited significance at p<0.05. Abdominal X-ray imaging of the optimized tablets on healthy rabbit’s stomach confirmed the floating behavior for more than 12 h. In vivo pharmacokinetic studies in rabbits showed that the optimized formulation exhibited prolonged and extended drug release with improved Cmax, tmax, AUCo-t, and t1/2 of test product when compared to marketed product. IVIVC model was developed by using dissolution data of in vitro and pharmacokinetics data of in-vivo by de-convolution method (Wagner-Nelson method). Conclusion: The Quality by Design implementation in the formulation and optimization abridged the number of trials to produce a cost-effective formula. In vivo studies confirmed that the formula was successfully developed with extended floating time (12 h) and drug release by risk analysis and experimental designs. Level A correlation was observed which confirmed a good correlation between in vitro and in vivo data.

scholarly journals Articaine in functional NLC show improved anesthesia and anti-inflammatory activity in zebrafish

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Gustavo H. Rodrigues da Silva ◽  
Gabriela Geronimo ◽  
Juan P. García-López ◽  
Lígia N. M. Ribeiro ◽  
Ludmilla D. de Moura ◽  
...  
Keyword(s):  
Release Kinetics ◽  
In Vitro Release ◽  
Tween 80 ◽  
Inflammatory Activity ◽  
Formulation Development ◽  
Anesthetic Effect ◽  
Copaiba Oil ◽  
Anti Inflammatory

AbstractAnesthetic failure is common in dental inflammation processes, even when modern agents, such as articaine, are used. Nanostructured lipid carriers (NLC) are systems with the potential to improve anesthetic efficacy, in which active excipients can provide desirable properties, such as anti-inflammatory. Coupling factorial design (FD) for in vitro formulation development with in vivo zebrafish tests, six different NLC formulations, composed of synthetic (cetyl palmitate/triglycerides) or natural (avocado butter/olive oil/copaiba oil) lipids were evaluated for loading articaine. The formulations selected by FD were physicochemically characterized, tested for shelf stability and in vitro release kinetics and had their in vivo effect (anti-inflammatory and anesthetic effect) screened in zebrafish. The optimized NLC formulation composed of avocado butter, copaiba oil, Tween 80 and 2% articaine showed adequate physicochemical properties (size = 217.7 ± 0.8 nm, PDI = 0.174 ± 0.004, zeta potential = − 40.2 ± 1.1 mV, %EE = 70.6 ± 1.8) and exhibited anti-inflammatory activity. The anesthetic effect on touch reaction and heart rate of zebrafish was improved to 100 and 60%, respectively, in comparison to free articaine. The combined FD/zebrafish approach was very effective to reveal the best articaine-in-NLC formulation, aiming the control of pain at inflamed tissues.

In vitro and In vivo Characterization of Pectin Based In situ Gelling System of Famotidine

2013 ◽  
Vol 5 (4) ◽  
pp. 1885-1894
Author(s):  
Mohmadmoin K. Modasiya ◽  
A K Patel ◽  
V.M Patel ◽  
G.C Patel
Keyword(s):  
Drug Release ◽  
Calcium Chloride ◽  
Fickian Diffusion ◽  
Similarity Factor ◽  
Drug Content ◽  
Model Drug ◽  
In Situ Gelling

In this study famotidine was used as a model drug to formulate and evaluate pH-induced in situ gelling system for oral sustained release drug delivery in stomach which has shorter biological half-life. To study the effect of independent variables 32 full factorial design was employed, concentration of pectin as pH dependant polymer and concentration of calcium chloride on dependent variables like viscosity, drug content, 50% and 80% drug release and similarity factor. It was found that both the concentration of pectin and concentration of calcium chloride had significant effect on viscosity, drug content, 50% and 80% drug release and similarity factor of the system. In vitro drug release study showed that drug released from the in situ gel followed non-Fickian diffusion. Mathematical modeling was employed for quantitative evaluation of the effect of formulation variables. Rat pylorus legation model was used for in vivo study of the selected formulation. Results shows gel formation in gastric juice and reduction in ulcer index. There were few or no major changes in the formulation during three months stability testing. The in situ gelling systems are useful for delivery of famotidine.

Development of Mucoadhesive Patches for Buccal Administration of Prochlorperazine: Evaluation of In Vitro Release and Mechanical Properties

1970 ◽  
Vol 1 (1) ◽  
pp. 64-70
Author(s):  
Chandra Sekhar Kolli ◽  
Ramesh Gannu ◽  
Vamshi Vishnu Yamsani ◽  
Kishan V ◽  
Madhsudan Rao Yamsani
Keyword(s):  
Mechanical Properties ◽  
Drug Release ◽  
Moisture Absorption ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Work Of Adhesion ◽  
Casting Technique ◽  
Vitro Release

The aim of this investigation was to develop and evaluate mucoadhesive buccal patches of prochlorperazine (PCPZ). Permeation of PCPZ was calculated in vitro using porcine buccal membrane. Buccal formulations were developed by solvent-casting technique using hydroxy propylmethyl cellulose (HPMC) as mucoadhesive polymer. The patches were evaluated for in vitro release, moisture absorption and mechanical properties. The optimized formulation, based on in vitro release and moisture absorption studies, was subjected for bioadhesion studies using porcine buccal membrane. In vitro flux of PCPZ was calculated to be 2.14 ± 0.01 µg. h–1.cm–2 and buccal absorption was also demonstrated in vivo in human volunteers.             In vitro drug release and moisture absorbed was governed by HPMC content. Increasing concentration of HPMC delayed the drug release. All formulations followed Zero order release kinetics whereas the release pattern was non-Fickian. The mechanical properties, tensile strength (10.28 ± 2.27 kg mm–2 for formulation P3) and elongation at break reveal that the formulations were found to be strong but not brittle. The peak detachment force and work of adhesion for formulation P3 were 0.68 ± 0.15 N and 0.14 ± 0.08 mJ, respectively. The results indicate that suitable bioadhesive buccal patches of PCPZ with desired permeability and suitable mechanical properties could be prepared

scholarly journals SODIUM CROMOGLYCATE MUCOADHESIVE BUCCAL PATCHES: DESIGN, FABRICATION, IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 10 (2) ◽  
pp. 76 ◽  
Author(s):  
Shereen Ahmed Sabry
Keyword(s):  
Tensile Strength ◽  
Sodium Cromoglycate ◽  
Residence Time ◽  
In Vitro Release ◽  
Moisture Uptake ◽  
Drug Content ◽  
Weight Variation ◽  
Folding Endurance

Objective: The purpose of this study was to design and formulate mucoadhesive buccal patches of sodium cromoglycate (SCG) as an alternative way to overcome its poor oral absorption and short half-life.Methods: Mucoadhesive patches were prepared by solvent casting technique using cellulose acetate butyrate (CAB) alone or in combination with mucoadhesive polymers like SCMC (sodium carboxymethyl cellulose), HPMC 100M (hydroxyl propyl methyl cellulose) and Cbp934P (carbopol) in different concentrations. The successful patches were evaluated for thickness, weight variation, folding endurance, tensile strength, drug content, surface pH, moisture uptake, swelling percentage, mucoadhesion strength, residence time, in vitro release study, ex vivo permeation and in vivo pharmacokinetic studies.Results: The thickness of all prepared patches ranged from 0.210±0.006 to0.355±0.012, folding endurance was more than 300, weight variation did not exceed 0.179±0.015, tensile strength and % elongation ranged from 6.4±0.018 to 13.1±0.024, and from 30.4±0.88 to 53.4±0.78respectively. The swelling percentage after one hour was from 20.8±0.99 to 53.2±1.5. pH of all prepared patches did not exceed 6.8, the drug content was about 99 to 101%, moisture uptake did not exceed 10%. Mucoadhesion strength and residence time ranged from 17.2±0.14 to 51.2±0.26, and from 3.35±0.25 to 7.45±0.28 respectively. The cumulative release percentage of SCG was in the following descending order CAB>CAB with Cbp934P>CAB with HPMC>CAB with SCMC. The optimized patch (F9) decreased the Cmax and increased Tmax compared to the parenteral solution.Conclusion: It can be concluded that mucoadhesive buccal patch is a promising dosage form to prolong the release of SCG and enhance its poor oral bioavailability.

scholarly journals PREPARATION AND EVALUATION OF SIMVASTATIN TRANSDERMAL FILM

2018 ◽  
Vol 10 (5) ◽  
pp. 235
Author(s):  
Haritha V. Anod ◽  
N. Vishal Gupta ◽  
D. V. Gowda ◽  
Manohar M.
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Moisture Content ◽  
Release Kinetics ◽  
Solvent Evaporation ◽  
Surface Ph ◽  
Drug Content ◽  
Folding Endurance ◽  
Transdermal Film

Objective: The objective of the study was to prepare simvastatin transdermal films for the treatment of atherosclerosis and to evaluate the effect of concentration of polymer on penetration enhancement.Methods: Solvent evaporation technique was employed for the preparation of films and the prepared films were evaluated for various physicochemical properties of films such as tensile strength, thickness, surface pH, swellability, drug content, moisture content and folding endurance. In vitro drug, release study and release kinetics were also studied.Results: Tensile strength ranged from 3.56±0.343 to 4.56±0.12 (N/mm²). The films were of uniform weight. Thickness varied from 0.2±0.3 mm to 0.2±0.8 mm. Surface pH ranged from 6.6±0.14 to 6.9±0.16. Percentage swellability ranged from12.1±0.36 to 16.3±0.22. Percentage drug content ranged from 88.4±0.7% to 90.5±0.6% in all the formulation. Percentage moisture content ranged from 0.864 to 1.03%. Moisture uptake was from 2.6±0.24 to 2.9±0.072. The folding endurance test gave satisfactory results and F3 formulation showed maximum drug release.Conclusion: From the study, it was concluded that out of various formulations, the F3 formulation was found to be the optimum formulation with 88% drug release at the fourteenth hour.Keywords: Simvastatin, Transdermal film, Solvent evaporation, Penetration enhancer, Swellability

Sign in / Sign up

Export Citation Format

Share Document