Recent Advances in Polymer-Based Nanocomposites: A Brief Review

2021 ◽  
Vol 13 ◽  
Author(s):  
S. K. Parida
Keyword(s):  
Electrical Properties ◽  
Polymer Nanocomposites ◽  
Polymer Matrix ◽  
Polymer Nanocomposite ◽  
Review Article ◽  
Nanosized Particles ◽  
Mechanical And Electrical Properties ◽  
Potential Applications ◽  
Manufacturing Techniques ◽  
Host Polymer

: This presented review article is constructed to be an extensive source for polymer nanocomposite researchers covering the relation of structure with property, manufacturing techniques, and potential applications when a small number of nanosized particles are added to a host polymer matrix. The exceptional structural, mechanical, and electrical properties of polymer nanocomposites after the addition of inorganic solid nanoparticles are elucidated by the large surface area of doped nanoparticles that interact with host polymer matrices. Due to the generation of ideas, the conventional methods of preparation of polymer nanocomposites are made more interesting. Hence, this brief review presents a sketch of different synthesis techniques, characterization, applications, and safety concerns for polymer nanocomposites.

Comparative Study on Partial Discharge Characteristic in Polymer-Nanocomposite as Electrical Insulating Material

2013 ◽  
Vol 284-287 ◽  
pp. 62-66
Author(s):  
Wan Akmal Izzati ◽  
Mohd Shafanizam ◽  
Yanuar Z. Arief ◽  
Mohamad Zul Hilmey Makmud ◽  
Zuraimy Adzis ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Polymer Nanocomposites ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Partial Discharge ◽  
Specific Area ◽  
Polymer Nanocomposite ◽  
Insulating Material ◽  
Weight Percentage ◽  
Experimental Works

Polymer nanocomposites have been attracting attention among researchers as electrical insulating application from energy storage to power delivery. However, partial discharge has always been a predecessor to major faults and problems in this field. In addition, there are a lot more to explore as the characteristic of partial discharge in nanocomposites is not clearly understood as well as the electrical properties of the nanocomposites. By adding a few amount of weight percentage (wt%) of the nano fillers, the physical, mechanical and electrical properties of polymers can be greatly enhanced. This is due to its amazing characteristic of having large specific area as a consequential from its nano sized particle that could enhance the electrical properties of the insulator. For instance, nano fillers in nanocomposites such as silica (SiO2), alumina (Al2O3) and titania (TiO2), play big role in providing good approach to increase dielectric breakdown strength and partial discharge resistance of nanocomposites. Such polymer nanocomposites will be reviewed thoroughly in this paper based on previous experimental works and studies. This paper provides reviews from related publications from year 1997 to 2011 including the results of experimental works which have been conducted by the authors with main focus on partial discharge characteristics in polymer nanocomposites, which demonstrates that research and utilization of polymer nanocomposites has well developed from past decades and will possess a high demand in future as electrical insulating material.

Achieving electrical percolation in polymer-carbon nanotube composites

2003 ◽  
Vol 788 ◽  
Author(s):  
Sameer S. Rahatekar ◽  
M. Hamm ◽  
Milo S. P. Shaffer ◽  
James A. Elliott
Keyword(s):  
Electrical Properties ◽  
Polymer Matrix ◽  
Dissipative Particle Dynamics ◽  
Conductive Polymer ◽  
Process Variables ◽  
Electrically Conductive ◽  
Electrical Percolation ◽  
Mechanical And Electrical Properties ◽  
Nanotube Composites ◽  
Mesoscale Simulations

ABSTRACTThe addition of carbon nanotubes (CNTs) to a polymer matrix is expected to yield improvements in both mechanical and electrical properties. The focus of this paper is to give a snapshot of our current work on CNT-filled thermoplastic polymer textile fibers and the enhancement of their electrical properties. The challenge is to determine the type and size of nanotubes that are most effective for a given application, and how they should be dispersed or modified to interact with the polymer. The objective of this work is to develop an understanding of how the processing methods and properties of nanotube polymer composites are related to the geometry of the nanotubes used, their orientation, and their loading fraction. It will then be possible to design desired composite properties by controlling the relevant process variables.The research described in this paper primarily involves mesoscale simulations (dissipative particle dynamics) of packed assemblies of oriented CNTs suspended in a polymer matrix. Computer simulations have been carried out to study the effect of processing conditions, aspect ratio of CNTs and effect of electric field on electrical conductivity. The percolation threshold required to achieve an electrically conductive polymer-CNT fiber can be predicted for given set of process variables. The model predictions are compared with the predictions of classical percolation theory, and with experimental data from measurements of bulk resistivity from CNTs dispersed in thermoplastic polymers.

Structure and magnetic properties of PP+Fe3O4 nanocomposites depending on manufacturing techniques

2019 ◽  
Vol 33 (27) ◽  
pp. 1950315
Author(s):  
M. A. Ramazanov ◽  
H. A. Shirinova ◽  
F. V. Hajiyeva ◽  
A. Kh. Karimova
Keyword(s):  
Magnetic Properties ◽  
Polymer Matrix ◽  
Hot Pressing ◽  
Polymer Nanocomposite ◽  
Lower Surface ◽  
Pressing Method ◽  
Manufacturing Techniques ◽  
Technological Methods ◽  
Extrusion Method ◽  
Surface Regularity

The structures and magnetic properties of the PP[Formula: see text]+[Formula: see text]Fe3O4 nanocomposites manufactured by different technological techniques were studied in this work. Polymeric nanocomposite materials based on PP[Formula: see text]+[Formula: see text]Fe3O4 were obtained by two technological methods: hot pressing and extrusion. Scanning electron microscopy (SEM) and AFM investigations of nanocomposites were carried out for structure analysis. It was found that the distribution of Fe3O4 nanoparticles in the polymer matrix for nanocomposites obtained by the hot pressing method is uniform and monodisperse. Compared to this, the heterogeneous and inhomogeneous distribution of nanoparticles in the polymer matrix for the samples that were produced through extrusion method was observed. Furthermore, the nanocomposite samples produced via the extraction method have a lower surface regularity rather than those obtained by hot pressing. M(H) and M(T) studies of polymer nanocomposite samples synthesized through both technological methods were performed. Studies have shown that for relatively low concentrated samples — PP[Formula: see text]+[Formula: see text]10% Fe3O4, the values of the saturation magnetization were close, but the magnetization of nanocomposites obtained by heat pressing was slightly higher than the other samples. This is because the samples obtained by hot pressing method are characterized by higher uniformity and structure that is called “flat packaging”.

scholarly journals A short review on synthesis and characterisation of nano SiO2/TiO2 composite for insulation application

2021 ◽  
Vol 4 (2) ◽  
pp. 155
Author(s):  
Nurul Farrahani Azlan ◽  
Suffiyana Akhbar ◽  
Suhaiza Hanim Hanipah ◽  
Rahida Wati Sharudin
Keyword(s):  
Dielectric Properties ◽  
Tio2 Nanoparticles ◽  
Polymer Nanocomposites ◽  
Polymer Matrix ◽  
Sol Gel ◽  
Polymer Nanocomposite ◽  
Sio2 Nanoparticles ◽  
Short Review ◽  
Electrical Insulation ◽  
Insulation Material

Silica dioxide (SiO2) and titanium dioxide (TiO2) are nanoparticle fillers that are widely incorporated into polymer matrix for thermal insulation application. Combination of both fillers in producing polymer nanocomposite is interesting to review. This paper reviews on the current and recent research on the method to incorporate the SiO2/TiO2 nanoparticles as the fillers into various polymer matrix such as direct mixing, intercalation, sol-gel and in situ polymerisation as well as the effect of nanofillers on the thermal properties, morphology studies, rheology behaviour, mechanical property, and conductivity (thermal and electrical) of the SiO2/TiO2 polymer nanocomposites. This paper also reviews the effect of SiO2/TiO2 nanoparticles to the polymer nanocomposites in term of dielectric properties as a potential electrical insulation material. SiO2 nanoparticles presented to be the best filler to enhance the dielectric properties compared to the TiO2. When both of nanofillers are incorporated into the polymer matrix, a better result in term of mechanical, thermal, and electrical insulation properties are produced.

scholarly journals Synthesis, Dielectric and Electrical Properties of Silver-Polymer Nanocomposites

2021 ◽  
Author(s):  
Srikanta Moharana ◽  
Ankita Subhrasmita Gadtya ◽  
Rozalin Nayak ◽  
Ram Naresh Mahaling
Keyword(s):  
Silver Nanoparticles ◽  
Electrical Properties ◽  
Polymer Nanocomposites ◽  
Metallic Nanoparticles ◽  
Ag Nps ◽  
Science And Engineering ◽  
Synthesis Techniques ◽  
Diverse Field ◽  
Potential Applications ◽  
Synthesis Routes

Metallic nanoparticles and its composites have emerged as valuable asset in all phases of material science and engineering including electronic, optics and electromagnetic domains. Silver nanoparticles (Ag NPs) are one of the most vital and fascinating nanomaterials among several metallic nanoparticles due to its large surface ratio and outstanding properties with diverse field of potential applications. We demonstrated various synthesis techniques of nanocomposites, silver nanoparticles and composite based on these particles have shown great importance because of the remarkable properties (high electrical and thermal conductivity, good chemical stability and catalytic properties) of silver nanoparticles. This chapter provides various synthesis techniques for preparation of silver nanoparticles and their composites with dielectric and electrical properties in a lucid manner. The detail discussions of silver-polymer nanocomposites, emphasizing on each individual synthesis routes and properties have been carried out.

A Review on Effect of Nanoreinforcement on Mechanical Properties of Polymer Nanocomposites

2018 ◽  
Vol 280 ◽  
pp. 284-293 ◽  
Author(s):  
M.N. Ervina Efzan ◽  
N. Siti Syazwani
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Polymer Nanocomposites ◽  
Polymer Matrix ◽  
Functional Performance ◽  
Polymer Nanocomposite ◽  
Filled Polymers ◽  
Performance Properties ◽  
New Class ◽  
Potential Use

Polymer nanocomposites represent a new class of materials that offer an alternative to the conventional filled polymers. In this new class of materials, nanosized reinforcement are dispersed in polymer matrix offering tremendous improvement in performance properties of the polymer. The combination of nanoscale reinforcement and polymer matrix possess outstanding properties and functional performance which play an important role in many field of applications. This review addresses the types of nanoscale materials reinforced in polymer matrix such as nanocellulose, carbon nanotubes (CNTs), graphene, nanofibers and nanoclay followed by the discussion on the effect of these nanoscale reinforcement on mechanical properties of polymer nanocomposites. Besides, the potential use of polymer nanocomposite reinforced with those nanoscale reinforcements in various field of applications also discussed.

Enhanced Electrical Properties of PVDF-TrFE Nanocomposite for Actuator Application

2014 ◽  
Vol 605 ◽  
pp. 335-339 ◽  
Author(s):  
Kie Yong Cho ◽  
A Ra Cho ◽  
Yun Jae Lee ◽  
Chong Min Koo ◽  
Soon Man Hong ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Raman Spectroscopy ◽  
Electrical Properties ◽  
Polymer Nanocomposites ◽  
Casting Process ◽  
Polymer Nanocomposite ◽  
Solution Casting ◽  
Electromechanical Properties ◽  
Actuator Application

Carbon nanotubes (CNTs) coated by compatibilizer (P3HT-PMMA) imparted sta-ble dispersion in organic solvents and polymer matrix (P(VDF-TrFE)). The compatibility be-tween CNTs with P3HT-PMMA was con rmed by measuring Raman spectroscopy. CoatedCNTs were then blended with P(VDF-TrFE) (70:30 mol%) to obtain polymer nanocompositesby solution- casting process. Polymer nanocomposites showed enhanced electrical characteris-tics, as nanocomposites near the threshold of the transition between P(VDF-TrFE) insulatorand CNT conductor revealed great improvement of electrical conductivity up to 10-6 S/cmat 1 KHz. Electromechanical properties of the polymer nanocomposite were examined as afunction of electric eld.

scholarly journals Role of Molecular Weight in Polymer Wrapping and Dispersion of MWNT in a PVDF Matrix

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 162 ◽  
Author(s):  
Muthuraman Namasivayam ◽  
Mats R. Andersson ◽  
Joseph Shapter
Keyword(s):  
Molecular Weight ◽  
Electrical Properties ◽  
Polymer Matrix ◽  
Polymer Nanocomposite ◽  
Scanning Calorimetry ◽  
Crystallisation Behaviour ◽  
Effective Dispersion ◽  
Thermal And Electrical Properties ◽  
Polymer Wrapping

The thermal and electrical properties of a polymer nanocomposite are highly dependent on the dispersion of the CNT filler in the polymer matrix. Non-covalent functionalisation with a PVP polymer is an excellent driving force towards an effective dispersion of MWNTs in the polymer matrix. It is shown that the PVP molecular weight plays a key role in the non-covalent functionalisation of MWNT and its effect on the thermal and electrical properties of the polymer nanocomposite is reported herein. The dispersion and crystallisation behaviour of the composite are also evaluated by a combination of scanning electron microscopy (SEM) and differential scanning calorimetry (DSC).

Electrical properties of anisotropic graphene/PDMS composites induced by aligned ferromagnetic particles

2020 ◽  
pp. 1045389X2096986
Author(s):  
Shuai Dong ◽  
Shiwei Chen ◽  
Bin Li ◽  
Xiaojie Wang
Keyword(s):  
Magnetic Field ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Percolation Threshold ◽  
Conductive Polymer ◽  
Critical Value ◽  
Iron Particles ◽  
Mechanical And Electrical Properties ◽  
Anisotropic Structures ◽  
Potential Applications

Graphene nanoplate (GNP) is a two-dimensional plate-like carbon material with high aspect ratio and excellent electrical conductivity. It is one of the most commonly used fillers for conductive polymer composites (CPCs), which have potential applications in flexible electrodes and sensors. The electrical properties of the CPCs particularly depend on the microstructure of GNP networks. The electrical conductivity of the CPCs leaps in several magnitude levels when the graphene concentration reaches a critical value, which is defined as the percolation threshold. For ordinary isotropic CPCs, the percolation threshold is relatively high, which leads to inferior performance with poor mechanical and electrical properties. Aligning the graphene plates is an effective method to reduce the percolation threshold of the CPCs. Carbonyl iron particles (CIPs) are easily aligned to form chain-like structures when a magnetic field is applied. In this work, CIPs and GNPs are mixed with polydimethylsiloxane (PDMS), and the hybrid is cured under a magnetic field of 0.5 T. The alignment of CIPs induces the GNPs in the PDMS to orientate in a certain direction under the applied magnetic field generating anisotropic structures. Both isotropic and anisotropic structured GNPs/PDMS composites are prepared with various GNP concentrations. The microstructure and electrical conductivity of the GNPs/PDMS composites are investigated by experimental methods. It is found that anisotropic graphene networks are formed and the percolation threshold of the anisotropic composites is 0.15 vol%, compared to that of the isotropic composites which is 0.85 vol%. The alignment of GNPs significantly reduces the percolation threshold. Furthermore, a plate lattice model is proposed to reveal the effect of the alignment of GNPs on the formation of conductive networks. With the increase of the alignment degree of GNPs, the percolation threshold decreases significantly, which is consistent with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document