Preparation and Evaluation of Chitosan Loaded Naproxen Nanoparticles by Emulsion Interfacial Reaction Method

2019 ◽  
Vol 9 (2) ◽  
pp. 89-96
Author(s):  
Abbaraju Krishna Sailaja ◽  
Juveria Banu
Keyword(s):  
Drug Release ◽  
Interfacial Reaction ◽  
Polymer Concentration ◽  
Chitosan Nanoparticles ◽  
Particle Diameter ◽  
Entrapment Efficiency ◽  
Reaction Method ◽  
Release Data ◽  
Mean Particle Diameter

Aim: The aim of this investigation was to develop and characterize naproxen loaded chitosan nanoparticles by emulsion interfacial reaction method. Methodology: For emulsion interfacial reaction method chitosan was used as a polymer. In this method, eight formulations were prepared by varying drug to polymer concentration. Discussion: Out of eight formulations prepared using emulsion interfacial reaction method EI8 formulation was found to be the best formulation. The drug content was observed as 94.4%, entrapment efficiency and loading capacity were found to be 87.5% and 75%, respectively. The mean particle diameter was measured as 324.6nm and the Zeta potential value was found to be -42.4mv. In vitro drug release data showed 97.2% of drug release rate sustained up to 12hrs. Conclusion: The results clearly reveal that EI8 formulation having the highest amount of drug was considered as the best formulation because of its small mean particle diameter, good entrapment efficiency, and stability.

Formulation of Modified Release Atorvastatin Nanoparticles by Emulsion Interfacial Reaction Method

2015 ◽  
Vol 8 (3) ◽  
pp. 2937-2940
Author(s):  
Sudhakar Sekar ◽  
Shee Sim May
Keyword(s):  
Interfacial Reaction ◽  
Therapeutic Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Morphological Characteristics ◽  
Preparation Technique ◽  
Modified Release ◽  
Reaction Method ◽  
Vitro Release

The aim of the study is to formulate a modified release chitosan nanoparticles for the oral delivery of atorvastatin and to study the in vitro release of atorvastatin from chitosan nanoparticles. Atorvastatin-loaded chitosan nanoparticles were prepared with different concentration of cross-linking agent (glutaraldehyde) by emulsion interfacial reaction method. The formed nanoparticles were characterized in terms of size and morphological characteristics by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Spherical and regular nanoparticles with the size range of 100-250nm were formed. Atorvastatin encapsulation efficiency of nanoparticles was found to be highest in ANP3, followed by ANP2 and ANP1. The in vitro release of atorvastatin was studied by membrane diffusion technique. The resulted cumulative percentage of drug released for ANP1, ANP2 and ANP3 were 60.08%, 34.81% and 20.39% respectively. Through this study, the nanoparticles preparation technique has shown to be a promising approach for enhancing the dissolution of hydrophobic drugs like atorvastatin calcium. The application of this novel delivery system offers good therapeutic potential in the management of hypercholesterolemia and dyslipidemia.

scholarly journals Fabrication and in vitro characterization of polymeric nanoparticles for Parkinson's therapy: a novel approach

2014 ◽  
Vol 50 (4) ◽  
pp. 869-876 ◽  
Author(s):  
Neha Gulati ◽  
Upendra Nagaich ◽  
Shubhini Saraf
Keyword(s):  
Drug Release ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Mode Of Delivery ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Novel Approach

The objective of the research was to formulate and evaluate selegiline hydrochloride loaded chitosan nanoparticles for the Parkinson's therapy in order to improve its therapeutic effect and reducing dosing frequency. Taguchi method of design of experiments (L9 orthogonal array) was used to get optimized formulation. The selegiline hydrochloride loaded chitosan nanoparticles (SHPs) were prepared by ionic gelation of chitosan with tripolyphosphate anions (TPP) and tween 80 as surfactant. The SHPs had a mean size of (303.39 ± 2.01) nm, a zeta potential of +32.50mV, and entrapment efficiency of SHPs was 86.200 ± 1.38%. The in vitro drug release of SHPs was evaluated in phosphate buffer saline (pH 5.5) using goat nasal mucosa and found to be 82.529% ± 1.308 up to 28 h. Release kinetics studies showed that the release of drug from nanoparticles was anomalous (non-fickian) diffusion indicating the drug release is controlled by more than one process i.e. superposition of both phenomenon, the diffusion controlled as well as swelling controlled release. SHPs showed good stability results as found during stability studies at different temperatures as mentioned in ICH guidelines. The results revealed that selegiline hydrochloride loaded chitosan nanoparticles are most suitable mode of delivery of drug for promising therapeutic action.

scholarly journals Development and Evaluation of Floating Microspheres of Sumatriptan Succinate using Ethyl Cellulose and Mucilage Extracted from Vigna Mungo

2021 ◽  
pp. 24-36
Author(s):  
Nilesh S. Kulkarni ◽  
Mukta A. Kulkarni ◽  
Rahul H. Khiste ◽  
Mohini C. Upadhye ◽  
Shashikant N. Dhole
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Vigna Mungo ◽  
Average Particle ◽  
Sumatriptan Succinate

Aim: The present investigation is to formulate and evaluate gastroretentive floating microspheres for sumatriptan succinate. Gastric retention is widely used approach to retain dosage form in stomach and to enhance absorption of drugs. Methods: The gastroretentive floating microspheres was prepared by two different techniques as solvent evaporation and W/O/W multiple emulsion technique. Ethyl cellulose, HPMC K4M polymer and mucilage extracted from Vigna Mungo in various proportions were used for formulation of microspheres. Combination of ethyl acetate and acetone in different proportion was used as organic phase and the microspheres were characterized for particle size, shape, morphology, percentage yield, entrapment efficiency, drug loading, In-Vitro Floating/Buoyancy study, In-vitro Floating/Buoyancy study and release kinetics. Results: The average particle size of all batches was found in the range 100 to 210 μm and the entrapment efficiency of all formulations was found in the range of 17.46 % to 59.28 %.Total floating time for Sumatriptan succinate floating microspheres was observed more than 12 h. The In-Vitro drug release study was performed for all formulations showed drug release in controlled manner. Conclusion: The particle size was increased with increased polymer concentration and it showed that polymer concentration has an impact on the entrapment efficiency. Ethyl cellulose microspheres showed more entrapment and sustained delivery of sumatriptan Succinate than microspheres prepared by combination of Ethyl cellulose: HPMC K4M and Ethyl cellulose: Vigna mungo mucilage.

Synergistic Antioxidant and Antibacterial Activity of Curcumin-C3 Encapsulated Chitosan Nanoparticles

2020 ◽  
Vol 26 (39) ◽  
pp. 5021-5029 ◽  
Author(s):  
Desu N.K. Reddy ◽  
Fu-Yung Huang ◽  
Shao-Pin Wang ◽  
Ramya Kumar
Keyword(s):  
Drug Release ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Antibacterial Activities ◽  
In Vitro Assays ◽  
X Ray Diffraction ◽  
Bacterial Diseases ◽  
Transmission Electron ◽  
Chitosan Nanoparticle

Background: Recent studies have focused on the nanoformulations of curcumin to enhance its solubility and bioavailability. The medicinal properties of curcumin-C3 complex, which is a combination of three curcuminoids (curcumin, demethoxycurcumin and bisdemethoxycurcumin) is less explored. Objective: The aim of this study was to prepare curcumin-C3 encapsulated in chitosan nanoparticles, characterize and evaluate their antioxidant and antibacterial potential. Methods: Ionic gelation method was used to prepare curcumin-C3 nanoparticles and was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and nanoparticle tracking analysis. In vitro assays were performed to assess drug release, antioxidant and antibacterial activities. Results: Curcumin-C3-chitosan nanoparticle showed an increased entrapment efficiency of >90%, drug release and improved antioxidant potential. Moreover, curcumin-C3-chitosan nanoparticle showed stronger inhibition of Escherichia coli and Staphylococcus aureus. Conclusion: Chitosan is a suitable carrier for curcumin-C3 nanoparticle and can be used as a drug delivery system in the treatment of inflammatory and bacterial diseases.

Design and Development of Lomustine Loaded Chitosan Nanoparticles for Efficient Brain Targeting

2020 ◽  
Vol 18 (1) ◽  
pp. 45-54 ◽  
Author(s):  
Anupriya Anand ◽  
Bharadhwaj Ramesh Iyer ◽  
Chandrasekar Ponnusamy ◽  
Rajesh Pandiyan ◽  
Abimanyu Sugumaran
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Research Work ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Brain Targeting ◽  
P Value ◽  
Drug Content ◽  
Diffusion Controlled

Aim: The present research work discussed the preparation of lomustine loaded with chitosan nanoparticles (LNCp) by ionic gelation method with homogenization using the design on experiments by Box-Behnken design. Methods: The nanoparticles are evaluated by particle size, zeta potential, surface morphology, drug content, entrapment efficiency and in-vitro drug release. Results: The FT-IR results support that drug have no interaction with excipients, which are used in the preparation of nanoparticle. The particle size, drug content and encapsulation efficiency of the developed nanoparticles ranged from 190 to 255 nm, 80.88% to 94.02%, and 77.12 to 88.74%, respectively. The drug release rate is diffusion-controlled over 8 hours. The F-value for all of the responses shows that the models are significant. The p-value, less than 0.05 for all the responses reveals the significance of the models. Graphical optimisation is done by desirability plot and overlay plot, which contains optimal values of independent variables with the desirability of 1. Conclusion: In conclusion, the results suggested that the optimised lomustine loaded chitosan nanoparticles are useful for brain targeting hence hold the potential for further research and clinical application.

scholarly journals CIPROFLOXACIN HYDROCHLORIDE LOADED CHITOSAN NANOPARTICLE GEL: ADVANCED APPROACH FOR ENHANCING PERMEATION AND SUSTAINABILITY OF DRUG RELEASE

2018 ◽  
Vol 6 (4) ◽  
pp. 67-72
Author(s):  
Dhruv Dev ◽  
Urvashi Bhardwaj ◽  
D N Prasad
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Ciprofloxacin Hydrochloride ◽  
Zero Order Kinetics ◽  
In Vitro Permeation ◽  
Chitosan Nanoparticle ◽  
Dsc Method

Transdermal drug delivery is one of the most reliable, appealing and effective technique which provides controlled and constant administration of drug. The aim of the study was to develop a gel form of nanoparticles loaded with ciprofloxacin hydrochloride in order to enhance the permeability of drug and for the release of drug over a period of 24 hrs. The nanoparticles were formulated by ionic gelation method using chitosan as a polymer and TPP as a cross linking agent. The compatibility of drug and polymer is studied by using FTIR spectroscopy and DSC method. There was no interaction observed by UV and FTIR study. The six different batches were prepared using different polymer and drug ratio. The fourth batch (N4) shows best results as compared to others which was used for further investigations. The formulation was then optimized for its particle size, zeta potential, morphology, drug content, drug entrapment efficiency, drug loading capacity and in-vitro permeation. TEM study reveals that the nanoparticles are spherical in shape and also confirms the size below 500nm. Drug release studies shows that nanoparticles could release drug for 24 hrs and follows zero order kinetics. From DSC analysis it was found that the drug was effectively encapsulated inside the chitosan nanoparticles. Finally, it was concluded that the penetration of ciprofloxacin hydrochloride was enhanced after loading it into chitosan nanoparticles and also the drug was release over 24 hrs.   Keywords: Nanoparticles, Ciprofloxacin Hydrochloride, Chitosan, Carbopol 934

scholarly journals Floating microspheres of Miglitol as gastro retentive drug delivery system: 32 full factorial design and in vitro evaluation

2021 ◽  
Author(s):  
Cheran K ◽  
Udaykumar B Bolmal ◽  
Archana S Patil ◽  
Umashri A Kokatanur ◽  
Rajashree S Masareddy
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Polymer Concentration ◽  
Entrapment Efficiency ◽  
Drug Entrapment Efficiency ◽  
Gastro Retentive

Abstract Background: The goal of this study was to develop a gastro retentive floating drug delivery system that would improve site specific activity, patient compliance and therapeutic efficacy.Methodology: Floating microspheres of Miglitol were formulated by double emulsion method using ethyl cellulose and eudragit E100 different weight ratio and PVA as an emulsifier. It has been prepared with respect quantity of polymer concentration and stirring speed to evaluate for % buoyancy, drug entrapment efficiency, particle size drug release rate. Result: The percent of buoyancy, drug entrapment efficiency, particle size, and percentage yield were increased with increase the polymer mixture concentration. Among all formulation batches, F6 showed acceptable results drug entrapment efficiency (86.57%) and buoyancy (94.25%). F10 formulation was prepared to check the predicted and actual factors and compared with optimized formulation F6. The drug release was increased as the polymer concentration was decrease. The kinetic model zero order had the highest regression coefficient value, it was described as a sustained release dosage form. According to ICH guideline accelerated stability studies of F6 and F10 formulations were conducted for 90 days. After 90 days buoyancy and in vitro drug release was performed and the results were F6 and F10 buoyancy was found to be 88.21%, 87.22% and in vitro drug release was found to be 62.87%, 63.51%. Conclusion: The present study, showed compatibility of drug with polymers by FTIR in formulation. Floating microsphere of Miglitol was prepared by double emulsion technique. The F6 Miglitol floating microsphere was optimized formulation demonstrated with excellent drug entrapment performance (86.57%), good floating behaviour (94.25%), and the largest particle size (670µm). The present study concludes that floating based gastro retentive delivery system of Miglitol microspheres has a safe and effective drug delivery system with increased therapeutic efficacy and a longer duration of action.

scholarly journals Development of Oral Sustained Release Rifampicin Loaded Chitosan Nanoparticles by Design of Experiment

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Bhavin K. Patel ◽  
Rajesh H. Parikh ◽  
Pooja S. Aboti
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Design Of Experiment ◽  
Drug Loading ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective. The main objective of the present investigation was to develop and optimize oral sustained release Chitosan nanoparticles (CNs) of rifampicin by design of experiment (DOE). Methodology. CNs were prepared by modified emulsion ionic gelation technique. Here, inclusion of hydrophobic drug moiety in the hydrophilic matrix of polymer is applied for rifampicin delivery using CN. The 23 full-factorial design was employed by selecting the independent variables such as Chitosan concentration (X1), concentration of tripolyphosphate (X2), and homogenization speed (X3) in order to achieve desired particle size with maximum percent entrapment efficiency and drug loading. The design was validated by checkpoint analysis, and formulation was optimized using the desirability function. Results. Particle size, drug entrapment efficiency, and drug loading for the optimized batch were found to be 221.9 nm, 44.17 ± 1.98% W/W, and 42.96 ± 2.91% W/W, respectively. In vitro release data of optimized formulation showed an initial burst followed by slow sustained drug release. Kinetic drug release from CNs was best fitted to Higuchi model. Conclusion. Design of Experiment is an important tool for obtaining desired characteristics of rifampicin loaded CNs. In vitro study suggests that oral sustained release CNs might be an effective drug delivery system for tuberculosis.

scholarly journals Investigating The Retention Potential of Chitosan Nanoparticulate Gel: Design, Development, In Vitro & Ex Vivo Characterization

2020 ◽  
Vol 15 (1) ◽  
pp. 41-67
Author(s):  
Shreya Kaul ◽  
Neha Jain ◽  
Jaya Pandey ◽  
Upendra Nagaich
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ex Vivo ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Eye Drops ◽  
Design Development ◽  
In Vitro Drug Release ◽  
Drug Content

Introduction: The main purpose of the research was to develop, optimize and characterize tobramycin sulphate loaded chitosan nanoparticles based gel in order to ameliorate its therapeutic efficacy, precorneal residence time, stability, targeting and to provide controlled release of the drug. Methods: Box-Behnken design was used to optimize formulation by 3-factors (chitosan, STPP and tween 80) and 3-levels. Developed formulation was subjected for characterizations such as shape and surface morphology, zeta potential, particle size, in vitro drug release studies, entrapment efficiency of drug, visual inspection, pH, viscosity, spreadability, drug content, ex vivo transcorneal permeation studies, ocular tolerance test, antimicrobial studies, isotonicity evaluation and histopathology studies. Results: Based on the evaluation parameters, the optimized formulation showed a particle size of 43.85 ± 0.86 nm and entrapment efficiency 91.56% ± 1.04, PDI 0.254. Cumulative in vitro drug release was up to 92.21% ± 1.71 for 12 hours and drug content was found between 95.36% ± 1.25 to 98.8% ± 1.34. TEM analysis unfolded spherical shape of nanoparticles. TS loaded nanoparticulate gel exhibited significantly higher transcorneal permeation as well as bioadhesion when compared with marketed formulation. Ocular tolerance was evaluated by HET-CAM test and formulation was non-irritant and well-tolerated. Histopathology studies revealed that there was no evidence of damage to the normal structure of the goat cornea. As per ICH guidelines, stability studies were conducted and were subjected for 6 months. Conclusion: Results revealed that the developed formulation could be an ideal substitute for conventional eye drops for the treatment of bacterial keratitis.

scholarly journals FORMULATION AND EVALUATION OF ALLOPURINOL LOADED CHITOSAN NANOPARTICLES

2019 ◽  
pp. 49-52 ◽  
Author(s):  
Gurpreet Kandav ◽  
D.c. Bhatt ◽  
Deepak Kumar Jindal
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Sustained Release Formulation

Objective: The objective of the present investigation was to fabricate and characterize allopurinol loaded chitosan nanoparticles (A-CNPs) for sustained release of drug. Methods: The allopurinol loaded chitosan nanoparticles were successfully prepared by employing the ionotropic gelation method. Further, particle size (PS), polydispersity index (PDI), zeta potential (ZP), Differential Scanning Calorimetry (DSC), entrapment efficiency (EE), Transmission Electron Microscopy (TEM), in vitro drug release, X-Ray Diffraction (XRD) and Fourier transform infrared (FTIR) were used for evaluating formulated A-CNPs Results: A-CNPs was successfully prepared and the particle size, polydispersity index, ZP and entrapment efficiency were found to be 375.3±10.1 nm, 0.362±0.01 and 32.5±2.7 mV and 52.56±0.10% respectively. In vitro release profile of A-CNPs showed sustained release and Higuchi model was found to be best fit for drug release kinetics. FTIR study depicted no chemical interaction between pure drug allopurinol (AL) and other excipients. Conclusion: The sustained release formulation of allopurinol was successfully prepared using HMW chitosan and evaluated for different parameters.

Sign in / Sign up

Export Citation Format

Share Document