scholarly journals Development of a cycle-accurate simulator of the Elbrus processor core memory subsystem

2019 ◽  
Vol 29 (2) ◽  
pp. 17-27
Author(s):  
D. V. Znamenskiy ◽  
V. N. Kutsevol
Keyword(s):  
Optimization Methods ◽  
Core Memory ◽  
Semiconductor Technology ◽  
Hardware Support ◽  
Processor Core ◽  
Access Latency ◽  
Cache Access ◽  
Memory Subsystem ◽  
The Impact

Increasing complexity of modern microprocessors, combined with semiconductor technology progress slowdown, make a further increase in performance more difficult. Under these circumstances, the relevance of the performance estimations of prospective microprocessors by dint of cycle-accurate simulation prior to their production in silicon is of growing importance. The approach to implementation of cycle-accurate simulator of core memory subsystem for Elbrus architecture, controlled by the existing functional simulator of this architecture, is presented herein. The method for validation of a cycleaccurate simulator by comparison with modeling of the RTL description of the prospective microprocessor is considered. The data on the speed of the cycle-accurate simulator and the main optimization methods, which were used to achieve acceptable performance, are presented. The preliminary estimates of the impact on the performance of some changes in the prospective processor core, including the cache access latency and hardware support for virtualization, obtained with the help of the cycle-accurate simulator are given. These assessments are important for making architectural decisions when designing the prospective Elbrus architecture processors.

scholarly journals An efficient approach to reliability-based topology optimization for the structural lightweight design of planar continuum structures

2021 ◽  
Vol 37 ◽  
pp. 270-281
Author(s):  
Fangfang Yin ◽  
Kaifang Dang ◽  
Weimin Yang ◽  
Yumei Ding ◽  
Pengcheng Xie
Keyword(s):  
Topology Optimization ◽  
Lightweight Design ◽  
Integrated Design ◽  
Optimization Methods ◽  
Filter Function ◽  
Continuum Structures ◽  
Performance Indexes ◽  
Reliability Method ◽  
Economic Indexes ◽  
The Impact

Abstract In order to solve the application restrictions of deterministic-based topology optimization methods arising from the omission of uncertainty factors in practice, and to realize the calculation cost control of reliability-based topology optimization. In consideration of the current reliability-based topology optimization methods of continuum structures mainly based on performance indexes model with a power filter function. An efficient probabilistic reliability-based topology optimization model that regards mass and displacement as an objective function and constraint is established based on the first-order reliability method and a modified economic indexes model with a composite exponential filter function in this study. The topology optimization results obtained by different models are discussed in relation to optimal structure and convergence efficiency. Through numerical examples, it can be seen that the optimal layouts obtained by reliability-based models have an increased amount of material and more support structures, which reveals the necessity of considering uncertainty in lightweight design. In addition, the reliability-based modified model not only can obtain lighter optimal structures compared with traditional economic indexes models in most circumstances, but also has a significant advantage in convergence efficiency, with an average increase of 44.59% and 64.76% compared with the other two reliability-based models. Furthermore, the impact of the reliability index on the results is explored, which verifies the validity of the established model. This study provides a theoretical reference for lightweight or innovative feature-integrated design in engineering applications.

Yield or profit: alternatives to the development of national crop production

Ekonomika APK ◽  
2021 ◽  
Vol 316 (2) ◽  
pp. 15-25
Author(s):  
Dmytro Zherlitsyn ◽  
Andrii Skrypnyk ◽  
Nataliia Klymenko ◽  
Kateryna Tuzhyk
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Maximum Yield ◽  
Target Function ◽  
Optimization Methods ◽  
Econometric Analysis ◽  
Practical Significance ◽  
Moderate Increase ◽  
Production Research ◽  
The Impact

The purpose of the article is to determine with the help of econometric and optimization methods the priority strategies of agrarian business in the field of crop production and to compare with the existing leaders in the use of innovations in the field of crop production. Research methods. The study is based on the use of econometric analysis methods to build trends in grain yield dynamics in leading countries in the use of innovative agricultural technologies and optimization methods for the study of dominant strategies used by agricultural enterprises in crop production. Research results. As a result of using the declining marginal grain yield depending on the amount of costs, which are determined by the cost of importing technology per 1 ha, the optimal cost values for both maximum yield and maximum profit. It is shown that at certain time intervals the costs of farmers were excessively high not only in terms of profit optimization but also to optimize yields. It is assumed that taking into account the latest innovation trends, agribusiness will move to a strategy of profit maximization Scientific novelty. As a result of econometric analysis it is shown that the use as a target function of yield leads to a significant increase in the variability of this indicator, while a moderate increase in yield is accompanied by significantly less variability. Quantitative indicators of the impact of climate risks on grain yields in Ukraine have been obtained, which explain approximately 50% of the variance in the grain yield indicator in Ukraine. Practical significance. It is shown that the representation of marginal yield in the form of a decreasing linear function is confirmed in practice. Further research, which in the presence of detailed information on the production processes of individual enterprises can be conducted by panel regression (observation points are spaced in space and time), can provide a more detailed picture of the efficiency of individual production components in their areas of interaction. Tabl.: 4. Figs.: 3. Refs.: 19.

The Impact of Face-to-Face Pharmacist Transitional Care Management Visits on Medication-Related Problems

2020 ◽  
Vol 36 (3) ◽  
pp. 95-101
Author(s):  
Bianca Mayzel ◽  
Sandra Axtell ◽  
Carolyn Richardson ◽  
Nicholas Link
Keyword(s):  
Readmission Rate ◽  
Medication Reconciliation ◽  
Transitional Care ◽  
Retrospective Chart Review ◽  
Optimization Methods ◽  
Related Factor ◽  
Prospective Group ◽  
The Difference ◽  
Internal Medicine Clinic ◽  
The Impact

Background: Studies are needed to evaluate medication-related problems (MRPs) to assess the effect of a pharmacist on managing medications postdischarge. Objective: To assess the ability of pharmacist-led medication review and reconciliation to reduce the number of MRPs found in transitional care medicine (TCM) visits, leading to medication optimization. Methods: This study involved a retrospective chart review of standard TCM procedure at a family/internal medicine clinic and a prospective, team-based TCM visit in the same clinic. Inclusion criteria included patients discharged from any hospital within our institution and seen in the clinic. The primary outcome was the difference in the proportion of MRPs found between the prospective and retrospective groups. Secondary outcomes included the number and specific type of MRPs found, classified by the Pharmaceutical Care Network Europe tool, and further subdivided by patient aware or unaware of MRP, only in the prospective group, as well as 30-day readmission rate. Results: Patients in the prospective group (n = 50) had an average age of 67.9 years versus 65.5 years in the retrospective group (n = 50). Four times as many patients in the prospective group were found to have MRPs than the retrospective group. The most common MRP was due to a patient-related factor, meaning the cause is related to a patient’s behavior. Patients were unaware of the MRP in a majority of these cases. Thirty-day readmission rate did not differ between the groups. Conclusion: Team-based TCM visits that included a pharmacist-led medication reconciliation uncovered more MRPs than patients who did not have a pharmacist perform a medication reconciliation.

scholarly journals Distributed Shared Mamory for NoC-based MPSoCs

2012 ◽  
Vol 7 (1) ◽  
pp. 47-60
Author(s):  
Tales Marchesan Chaves ◽  
Fernando Gehm Moraes
Keyword(s):  
Energy Consumption ◽  
Cache Coherence ◽  
Data Migration ◽  
Distributed Data ◽  
Access Latency ◽  
Cache Access ◽  
L2 Cache ◽  
Cache Coherence Protocol ◽  
Two Factors ◽  
Number Of Cycles

As the number of cores and functionalities integrated in embedded devices increases, the amount of memory used on these devices also increases, justifying the development of memory architectures that present scalability, low energy consumption and low latency. Two factors impact the scalability of MPSoC systems: cache access latency and energy consumption. The distance of the processors to the cache banks and the cache coherence protocol influences both factors. This work proposes a physically distributed data L2 cache as the cache architecture for a NoC-based MPSoC, because it allows the concept of clustering, and the implementation of data migration algorithms to reducing cache access latency. Results show that the number of cycles required to execute a given application might reduce 23% with the appropriate number of L2 cache banks. Also, a directory-based cache coherence protocol was implemented, exploiting the NoC physical services to improve performance. Results show a reduction of 17% in the number of clock cycles and a reduction up to 86% (average reduction: 39%) in energy consumption for some cache transactions.

scholarly journals Structural Connectivity of Sediment Affected by Check Dams in Loess Hilly-Gully Region, China

Water ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 2644
Author(s):  
Leichao Bai ◽  
Juying Jiao ◽  
Nan Wang ◽  
Yulan Chen
Keyword(s):  
Water Conservation ◽  
Structural Connectivity ◽  
Optimization Methods ◽  
Control Area ◽  
Chinese Loess Plateau ◽  
Check Dam ◽  
Chinese Loess ◽  
Check Dams ◽  
Discharge Canal ◽  
The Impact

Check dams play an irreplaceable role in soil and water conservation in the Chinese Loess Plateau region. However, there are few analyses on the connection between check dams and the downstream channel and the impact on structural connectivity and sediment interception efficiency. Based on a field survey, this study classified the connection mode between check dams and the downstream channel, and the actual control area percentage by discharge canal in dam land was used to quantitatively evaluate the degree of the structural connectivity of sediment between the check dam and the downstream channel. The analysis results show that the connection mode can be divided into eleven categories with different structural connectivity. The different connection modes and its combination mode of check dams and downstream channels in dam systems have a large difference, and the structural connectivity of the dam system is less than or equal to that of the sum of single check dams in a watershed. The degree of structural connectivity of a dam system will be greatly reduced if there is a main control check dam with no discharge canal in the lower reaches of the watershed. Compared with a single check dam, the structural connectivity of a dam system is reduced by 0–42.38%, with an average of 11.18%. According to the difference in connection mode and structural connectivity of check dams and dam systems in the four typical small watersheds, the optimization methods for connection mode in series, parallel and hybrid dam systems were proposed. The research results can provide a reference for the impact of a check dam on the sediment connectivity and the sediment interception efficiency in a watershed and can also guide the layout of a dam system and the arrangement of drainage facilities.

scholarly journals Drug related problems in admitted geriatric patients: The impact of clinical pharmacist interventions

2019 ◽  
Author(s):  
Berhane Yohannes Hailu ◽  
Derbew Fikadu Berhe ◽  
Esayas Kebede Gudina ◽  
Kidu Gidey ◽  
Mestwat Getachew
Keyword(s):  
Clinical Pharmacist ◽  
Geriatric Patients ◽  
Medical Center ◽  
Optimization Methods ◽  
Acceptance Rate ◽  
Drug Related Problems ◽  
Treatment Optimization ◽  
Pharmacist Interventions ◽  
Age Related ◽  
The Impact

Abstract Background: Geriatric patients are at high risk of Drug Related Problems (DRPs) due to multi- morbidity associated polypharmacy, age related physiologic changes, pharmacokinetic and pharmacodynamics alterations. These patients are often excluded from premarketing trials that can further increase the occurrence of DRPs. This study was aimed to identify DRPs and determinants in geriatric patients admitted to medical and surgical wards, and to evaluate the impact of clinical pharmacist interventions for treatment optimization. Methods: A prospective observational study was conducted among geriatric patients admitted to medical and surgical wards of Jimma University Medical Center from April to July 2017. Clinical pharmacists reviewed patients drug therapy, identified drug related problems and provided interventions. Data were analyzed by using SPSS statistical software version 20.0. Descriptive statistics were performed to determine the proportion of drug related problems. Logistic regression analyses were performed to identify the determinants of drug related problems. Results: A total of 200 geriatric patients were included in the study. The mean age of the participants was 67.3 years (SD7.3). About 82% of the patients had at least one drug related problems. A total of 380 drug related problems were identified and 670 interventions were provided. For the clinical pharmacist interventions, the prescriber acceptance rate was 91.7%. Significant determinants for drug related problems were polypharmacy (adjusted odds ratio [AOR]=4.350, 95% C.I: 1.212-9.260, p = 0.020) and number of comorbidities (AOR=1.588, 95% C.I: 1.029-2.450, p = 0.037). Conclusions: Drug related problems were substantially high among geriatric inpatients. Geriatric patients with polypharmacy and comorbidities need special attention to prevent drug related problems. Involving clinical pharmacist in the clinical team resulted in the improved acceptance rate of treatment optimization.

The Application of a Concurrent Design Optimization Tool to a Composite Panel for a Naval Ship Structure

1996 ◽  
Author(s):  
S. Dirlik ◽  
S. Hambric ◽  
S. Azarm ◽  
M. Marquardt ◽  
A. Hellman ◽  
...  
Keyword(s):  
Design Optimization ◽  
Conceptual Design ◽  
Electromagnetic Interference ◽  
Optimization Methods ◽  
Composite Panel ◽  
Concurrent Design ◽  
Naval Ship ◽  
Design Tradeoffs ◽  
Local Optimizer ◽  
The Impact

Abstract A prototype concurrent design optimization tool, named CELS for Concurrent Engineering of Layered Structures, has been developed. This tool can be used to analyze and/or optimize the conceptual design of a composite panel for Naval ship topside structures. CELS integrates five technology modules: (1) electromagnetic interference, (2) radar cross section, (3) structures, (4) cost, and (5) weight. Two optimization methods drive the integration of the technology modules. These methods include: (i) a local optimizer based on feasible sequential quadratic programming, and (ii) a global optimizer based on an exhaustive search. To obtain an objectively balanced design, “goodness” measures are allocated for each objective or constraint function. These measures, via a graphical user interface, allow topside designers to easily and quickly assess the impact of their decisions on various technologies. The utility and capability of CELS are demonstrated via the design of a topside composite panel. The design study shows that CELS can be easily adapted to different topside conceptual design problems, and that design tradeoffs can be performed quickly and used in decision making.

Study of the Design Representation Methods for the Optimization of Multi-Layer Composite Structures

2017 ◽  
Author(s):  
Hongyi Xu ◽  
Junqi Yang ◽  
Ching-Hung Chuang ◽  
Zhenfei Zhan
Keyword(s):  
Composite Structure ◽  
Composite Structures ◽  
Structure Optimization ◽  
Optimization Methods ◽  
Optimization Strategy ◽  
Root Cause ◽  
Design Representation ◽  
Layer Composite ◽  
Low Efficiency ◽  
The Impact

The purpose of multi-layer composite structure optimization is to find the optimal composite layout, such that superior structure performances and lightweight can be achieved. However, the existing optimization methods have a low efficiency when applied to the multi-component, multi-layer composite structure. Such low efficiency is caused by the high dimensionality and the inherent shortcomings of the existing design representation methods. In this work, two composite layout representation methods are compared to better understand their impacts on optimization. The root cause of the low efficiency is identified, and its influences are also quantified using three metrics. Furthermore, a new Representation-Switch Optimization (RSO) strategy is proposed. This strategy improves the search efficiency by switching the design representation methods during the optimization process. Three benchmark studies, two mathematical examples and one real engineering example, are conducted to demonstrate the impact of design representation methods on the optimization results, as well as the effectiveness of the proposed optimization strategy.

scholarly journals Performance Impact of Optimization Methods on MySQL Document-Based and Relational Databases

2021 ◽  
Vol 11 (15) ◽  
pp. 6794
Author(s):  
Cornelia A. Győrödi ◽  
Diana V. Dumşe-Burescu ◽  
Robert Ş. Győrödi ◽  
Doina R. Zmaranda ◽  
Livia Bandici ◽  
...  
Keyword(s):  
Performance Improvement ◽  
Relational Databases ◽  
Optimization Methods ◽  
Management Systems ◽  
Performance Impact ◽  
Database Structure ◽  
Database Technology ◽  
And Performance ◽  
The Impact

Databases are an important part of today’s applications where large amounts of data need to be stored, processed, and accessed quickly. One of the important criteria when choosing to use a database technology is its data processing performance. In this paper, some methods for optimizing the database structure and queries were applied on two popular open-source database management systems: MySQL as a relational DBMS, and document-based MySQL as a non-relational DBMS. The main objective of this paper was to conduct a comparative analysis of the impact that the proposed optimization methods have on each specific DBMS when carrying out CRUD (CREATE, READ, UPDATE, DELETE) requests. To perform the analysis and performance evaluation of CRUD operations for different amounts of data, a case study testing architecture based on Java was developed and used to show how the databases’ proposed optimization methods can influence the performance of the application, and to highlight the differences in response time and complexity. The results obtained show the degree to which the proposed optimization methods contributed to the application’s performance improvement in the case of both databases; based on these, a detailed analysis and several conclusions are presented to support a decision for choosing a specific approach.

Sign in / Sign up

Export Citation Format

Share Document