scholarly journals AKSESIBILITAS TATA LETAK ELEVATOR PENUMPANG GEDUNG KANTOR PUSAT LAYANAN TERPADU (KPLT) FAKULTAS TEKNIK UNY

2018 ◽  
Vol 14 (1) ◽  
pp. 26-35
Author(s):  
Galeh Nur Indriatno Putra Pratama ◽  
Sumarjo H
Keyword(s):  
Composite Material ◽  
Steel Structure ◽  
Design Development ◽  
Front Side ◽  
Faculty Work ◽  
Support Structure ◽  
Plastic Composite ◽  
Building Facade ◽  
In The Beginning ◽  
Is Design

ABSTRACTThe change of function of KPLT FT UNY Building Hall in the last five years is quite high. In the beginning, the KPLT Building Hall was only to support ospek, yudisium and faculty work meeting. Functions that require the fulfilment of vertical transportation (lift) that is the ceremony dies and syawalan big family of the faculty. The elevator is necessary because the occupation hall is not just people, but also catering equipment for parties. The purpose of this research 1) to determine the capacity of the building elevators KPLT, 2) determine the layout of elevators KPLT building, and 3) the form of the building facade lift KPLT FT UNY. The type of this research is design development, which refers to 4 D Thiagarajan. The results of the study can be shown 1) the elevator capacity for the building KPLT FT UNY is a passenger lift for 10 people, with two doors opening to the side, 2) The location of the FN UNY building elevator UNY in accordance with visibility, accessibility and freeway structure is on the front side east hall, 3) The appropriate elevator support structure for FT UNY building is steel structure because it is an additional construction, while for scopes using GRC, ACP or plastic composite material. Keywords: Accessibility, Elevator layout, KPLT building.ABSTRAKPerubahan fungsi Aula Gedung KPLT FT UNY dalam lima tahun terakhir cukup tinggi. Pada awalnya Aula Gedung KPLT hanya untuk mendukung ospek, yudisium dan rapat kerja fakultas. Fungsi yang menuntut pemenuhan sarana transportasi vertikal (lift) yaitu upacara dies dan syawalan keluarga besar fakultas. Sarana lift diperlukan karena okupasi aula bukan hanya orang, namun juga perlengkapan katering untuk pesta. Tujuan kajian ini adalah 1) menentukan besarnya kapasitas lift gedung KPLT,  2) menentukan tata letak lift gedung KPLT, dan 3)  bentuk fasad lift gedung KPLT FT UNY. Jenis kajian ini adalah pengembangan desain, dimana mengacu pada 4D Thiagarajan. Hasil kajian dapat ditunjukkan 1) kapasitas lift untuk gedung KPLT FT UNY adalah lift penumpang untuk 10 orang, dengan dua pintu membuka ke samping, 2) Letak lift gedung KPLT FT UNY yang sesuai dengan visibilitas, aksesibilitas dan bebas hambatan struktur adalah di sisi depan sebelah timur ruang hall, 3) Struktur pendukung lift yang sesuai untuk gedung KPLT FT UNY adalah struktur baja karena merupakan konstruksi tambahan, sedangkan untuk pelingkupnya menggunakan GRC, ACP atau bahan komposit dari plastik. Kata kunci: Aksesbilitas, Tata letak elevator, Gedung KPLT.

scholarly journals PENGEMBANGAN APLIKASI MOBILE DYNAMIC INTELLECTUAL LEARNING

2017 ◽  
Vol 6 (1) ◽  
pp. 224
Author(s):  
I Made Dwi Indrasanjaya . ◽  
I Made Agus Wirawan, S.Kom, M.Cs . ◽  
I Ketut Resika Arthana, S.T., M.Kom .
Keyword(s):  
Software Development ◽  
Adaptive Learning ◽  
Coding System ◽  
Functional Requirements ◽  
Design Development ◽  
Response Test ◽  
Development Life Cycle ◽  
E Learning ◽  
Analysis Design ◽  
Is Design

DIL (Dynamic Intellectual Learning) merupakan sebuah prototype pembelajaran online sebagai sebuah perubahan E-learning menuju adaptive learning. Tahapan penelitian dimulai dari analisis masalah yaitu penyebaran survey. Hasil survey berupa angket yang peneliti sebarkan ke mahasiswa Pendidikan Teknik Informatika menunjukkan bahwa sebagian besar mahasiswa setuju dengan pembelajaran menggunakan media dibandingkan pembelajaran konvensional. Kemudian tahapan penelitian dilanjutkan dengan mendesain sistem, mengembangkan coding sistem, mengimplementasi sistem, dan mengevaluasi sistem dengan uji blackbox, uji whitebox, uji ahli media, dan uji respon pengguna. Pengembangan Aplikasi Mobile Dynamic Intellectual Learning Berbasis Android adalah solusi dari permasalahan tersebut. Tujuan penelitian ini adalah untuk merancang dan mengimplementasikan “Aplikasi Mobile Dynamic Intellectual Learning Berbasis Android”. Pengembangan aplikasi Mobile Dynamic Intellectual Learning Berbasis Android menggunakan siklus hidup pengembangan perangkat lunak ADDIE (Analysis, Design, Development, Implementation and Evaluations). Bahasa pemrograman yang digunakan adalah Java, dengan software pengembangan Eclipse. Hasil dari penelitian ini yaitu perancangan dan implementasi “Pengembangan Aplikasi Mobile Dynamic Intellectual Learning Berbasis Android” dan uji blackbox, uji whitebox, uji ahli media, uji respon pengguna yaitu dari mahasiswa telah berhasil dilakukan. Seluruh kebutuhan fungsional telah berhasil diimplementasikan sesuai dengan rancangan.Kata Kunci : DIL, Android, E-Learning, Eclipse, Respon DIL (Dynamic Intellectual Learning) is a prototype of online learning as a change E-learning to adaptive learning. Stages of research starting from the analysis of the problem, namely the spread of the survey. The results of a questionnaire survey that researchers disclose to students of Informatic Technic of Education showed that most students agree with the learning using media than conventional learning. Later stages of the research continued with designing a system, developing a coding system, implement the system, and evaluate the system with blackbox testing, whitebox testing, media expert test, and user response test. Development of Mobile Dynamic Intellectual Learning Android Based Application is the solution to these problems. The purpose of this research is to design and implement "Mobile Dynamic Intellectual Learning Android Based Application". Development of Mobile Dynamic Intellectual Learning Android Based application use the software development life cycle ADDIE (Analysis, Design, Development, Implementation and Evaluations). The programming language used is Java, with Eclipse as software development. The results of this analysis is design and implementation of “Mobile Dynamic Intellectual Learning Android Based Application" and blackbox testing, whitebox testing, media expert test, and user response test. of the user, is students have been successfully performed. The entire functional requirements have been successfully implemented in accordance with the design.keyword : DIL, Android, E-Learning, Eclipse, Response

DESAIN MEJA TAMU

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Dita Andansari ◽  
Nadya Aglisyifa
Keyword(s):  
Design Method ◽  
Innovative Product ◽  
Design Development ◽  
Project Report ◽  
Final Project ◽  
Design Office ◽  
Final Design ◽  
Design Function ◽  
Coffee Table ◽  
Is Design

ABSTRAK  Perkembangan desain dan produk membuat terbentuknya berbagai variasi produk. Semakin banyak pula kebutuhan orang-orang akan produk yang sesuai dengan keinginannya. Produk yang diinginkan pastinya produk yang inovatif, sesuai kebutuhan, dan tidak lupa desain yang menarik. Fungsi dan desain produk selalu berdasarkan konsumen atau pengguna produk. Begitu pula meja tamu yang memiliki berbagai macam jenis. Meja tamu merupakan salah satu produk yang selalu ada diberbagai macam tempat. Baik di rumah, kantor, maupun sekolah. Dalam laporan tugas akhir yang berjudul “Desain Meja Tamu PT Buran Nusa Respati” ini di desain khusus untuk PT Buran Nusa Respati yang didesain khusus dengan kebutuhan penggunanya. Nantinya diharapkan produk ini dapat menjadi inspirasi sekaligus alternatif baru dalam pengembangan desain mebel khususnya bagian meja tamu dalam dunia industri mebel. Dengan metode perancangan yang sudah dilakukan diantaranya yaitu pengumpulan data, analisis, alternatif desain, pengembangan desain dari alternatif terpilih, serta desain akhir. Sehingga dihasilkanlah desain meja tamu untuk PT Buran Nusa Respati. Kata Kunci: Meja Tamu, Desain Mebel, Kantor   ABSTRACT  Development of design and product make form of various products. More needs of people for products that based on what they need. They absolutely need innovative product, based on needs, and not to mention an interesting design. Function and design of a product always based on consumer and user of product. Similarly, the coffee table has a variety of types. Coffee table is one of a product that always at any places. Such as house, office, even school. In this final project report that titled as “Design of Coffee Table for PT Buran Nusa Respati” is design specially for needs of the user. Later writer hoped this product can be an inspiration as well be a new alternative for development wood design especially for coffee table in wood industrial. With this design method that already done which are gathers data, analysis, alternatives design, design development from chosen alternative design, and final design. With that result is a coffee table for PT Buran Nusa Respati. Keywords: Coffee Table, Wood Design, Office

Design of the Hybrid-Propeller Shaft Using Composite Materials

2013 ◽  
Vol 284-287 ◽  
pp. 687-691
Author(s):  
Hyun Sik Kim ◽  
Dong Pyo Hong ◽  
Hee Yong Kang
Keyword(s):  
Composite Material ◽  
Fiber Composite ◽  
Steel Structure ◽  
Performance Standards ◽  
Aluminum Surface ◽  
Material Research ◽  
Propeller Shaft ◽  
Carbon Fiber Composite ◽  
Fiber Composite Material ◽  
The One

The propeller shaft of rear-wheel drive vehicle transfers power from the engine to rear wheels through the differential gear box. Generally the propeller shaft has a two-piece steel structure of more than 10kg of weight. In this paper, we designed the one-piece hybrid propeller shaft using the aluminum, carbon fiber composite material and glass fiber composite material. Research on the adhesive strength of the hybrid propeller shaft with respect to roughness of aluminum surface was conducted. The one piece hybrid propeller shaft satisfying the performance standards of propeller shaft such as statistic torsion torque strength and first bending natural frequency was manufactured. The manufactured hybrid shaft was assembled with the suitable connecting parts and analyzed for performance verification. This hybrid propeller shaft satisfies all performance standards of propeller shaft for automobile application. The hybrid shaft has vibration characteristics of 237Hz significantly higher than the standard characteristic of 150Hz of the existing two-piece steel structure propeller shaft.

Experimental Determination of the Poisson's Ratio and the Elastic Modulus of a Sand-Plastic Composite Material

2017 ◽  
Vol 6 (6) ◽  
pp. 292 ◽  
Author(s):  
Moro Olivier Boffoue ◽  
Brahiman Traore ◽  
Conand Honoré Kouakou ◽  
Kokou Esso Atcholi ◽  
Remy Lachat ◽  
...  
Keyword(s):  
Composite Material ◽  
Elastic Modulus ◽  
Experimental Determination ◽  
Poisson’S Ratio ◽  
Poisson's Ratio ◽  
Plastic Composite

scholarly journals Stability and Load-Carrying Capacity of Thin-Walled FRP Composite Z-Profiles under Eccentric Compression

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2956
Author(s):  
Hubert Debski ◽  
Sylwester Samborski ◽  
Patryk Rozylo ◽  
Pawel Wysmulski
Keyword(s):  
Composite Material ◽  
Carrying Capacity ◽  
Progressive Failure ◽  
Compressive Load ◽  
Experimental Tests ◽  
Numerical Results ◽  
Load Carrying Capacity ◽  
Plastic Composite ◽  
Load Carrying ◽  
Thin Walled

This study investigates the effect of eccentric compressive load on the stability, critical states and load-carrying capacity of thin-walled composite Z-profiles. Short thin-walled columns made of carbon fiber-reinforced plastic composite material fabricated by the autoclave technique are examined. In experimental tests, the thin-walled structures were compressed until a loss of their load-carrying capacity was obtained. The test parameters were measured to describe the structure’s behavior, including the phenomenon of composite material failure. The post-critical load-displacement equilibrium paths and the acoustic emission signal enabling analysis of the composite material condition during the loading process were measured. The scope of the study also included performing numerical simulations by finite element method to solve the problem of non-linear stability and to describe the phenomenon of composite material damage based on the progressive failure model. The obtained numerical results showed a good agreement with the experimental characteristics of real structures. The numerical results are compared with the experimental findings to validate the developed numerical model.

An Environmentally Friendly Recycled-Polyethylene Composite Reinforced by Diatomaceous Earth and Wood Fiber

2021 ◽  
Vol 889 ◽  
pp. 15-20
Author(s):  
Yeng Fong Shih ◽  
Wan Ling Tsai ◽  
Saprini Hamdiani
Keyword(s):  
Composite Material ◽  
Diatomaceous Earth ◽  
Wood Fiber ◽  
Raw Material ◽  
Wood Plastic Composite ◽  
Polyethylene Composite ◽  
Plastic Recycling ◽  
Plastic Composite ◽  
Slip Agent ◽  
The Cost

This study aims to develop a new wood-plastic composite (WPC) material from recycled thermoplasctics. The recycled low-density polyethylene (rLDPE) and high-density polyethylene (rHDPE) were used as matrix, whereas the diatomaceous earth waste (D) and wood fiber (WF) as filler. Recycled-LDPE and rHDPE were recovered and pelletized by a plastic recycling process. The 10-30wt.% diatomaceous earth waste was heat-treated at 200°C to remove impurities. The diatomaceous earth, maleic anhydride grafted polyethylene (MAPE), CaCO3, slip agent, antioxidants and WF were then mixed at 160°C, for 10 minutes, at stirring speed 50 rpm to produce wood-plastic composite material. The mechanical strength and thermal properties of the composites were investigated. The composite containing D and rLDPE results in an increase the hardness of the material which is higher than that of the virgin-LDPE. The tensile and impact strengths of the composite material prepared by rLDPE and D were higher than those of the rHDPE composite material. It is found that LDPE has excellent fluidity, which is helpful for subsequent processing. In addition, the diatomaceous earth waste can be used to reduce the cost of the raw material, and the product has both effects of environmental protection and marketability.

In the Beginning: Creation Stories

2020 ◽  
pp. 49-80
Author(s):  
Amanda Hollis-Brusky ◽  
Joshua C. Wilson
Keyword(s):  
Financial Aid ◽  
Training Programs ◽  
Law School ◽  
Law Schools ◽  
Support Structure ◽  
In The Beginning ◽  
Creation Stories ◽  
And Training

This chapter outlines the visions for the intentionally transformative missions—or “Christian Worldviews”—of newly created Christian conservative law schools and training programs. It gives detailed institutional histories of Regent Law School, Liberty Law School, Ave Maria School of Law, and Alliance Defending Freedom’s Blackstone Legal Fellowship. The chapter also previews some of the constraints and challenges these institutions faced initially (and continue to face) in attempting to realize their transformative missions. Principally, these constraints relate to finances and patronage, accreditation, financial aid, and licensing requirements for attorneys. The chapter then relates these constraints back to the Support Structure Pyramid.

Sign in / Sign up

Export Citation Format

Share Document