scholarly journals Development of 3D-Structure Fabrication Technology for Terahertz Optics Production

2019 ◽  
Vol 47 (7) ◽  
pp. 356
Author(s):  
Kuniaki KONISHI ◽  
Haruyuki SAKURAI ◽  
Junji YUMOTO ◽  
Makoto KUWATA-GONOKAMI
Keyword(s):  
3D Structure ◽  
Fabrication Technology ◽  
Terahertz Optics

scholarly journals Direct 2D-to-3D transformation of pen drawings

2021 ◽  
Vol 7 (13) ◽  
pp. eabf3804 ◽  
Author(s):  
Seo Woo Song ◽  
Sumin Lee ◽  
Jun Kyu Choe ◽  
Na-Hyang Kim ◽  
Junwon Kang ◽  
...  
Keyword(s):  
3D Structure ◽  
Fabrication Technology ◽  
3D Objects ◽  
Surface Initiated Polymerization ◽  
Structural Reinforcement ◽  
Roll To Roll ◽  
3D Geometry ◽  
Monomer Solution ◽  
2D Drawing ◽  
2D To 3D

Pen drawing is a method that allows simple, inexpensive, and intuitive two-dimensional (2D) fabrication. To integrate such advantages of pen drawing in fabricating 3D objects, we developed a 3D fabrication technology that can directly transform pen-drawn 2D precursors into 3D geometries. 2D-to-3D transformation of pen drawings is facilitated by surface tension–driven capillary peeling and floating of dried ink film when the drawing is dipped into an aqueous monomer solution. Selective control of the floating and anchoring parts of a 2D precursor allowed the 2D drawing to transform into the designed 3D structure. The transformed 3D geometry can then be fixed by structural reinforcement using surface-initiated polymerization. By transforming simple pen-drawn 2D structures into complex 3D structures, our approach enables freestyle rapid prototyping via pen drawing, as well as mass production of 3D objects via roll-to-roll processing.

scholarly journals Animatronic soft robots by additive folding

2018 ◽  
Vol 37 (6) ◽  
pp. 611-628 ◽  
Author(s):  
S Yim ◽  
C Sung ◽  
S Miyashita ◽  
D Rus ◽  
S Kim
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Computational Design ◽  
Fabrication Technology ◽  
Soft Robots ◽  
Design Algorithm ◽  
New Class ◽  
3D Geometry ◽  
Potential Applications ◽  
3D Assembly

This paper presents a new class of animatronic soft robots created by a desktop fabrication mechanism called additive folding. In this method, two-dimensional (2D) slices are threaded by multiple strings, accordion-folded by flexure hinges and finally stacked into a predefined three-dimensional (3D) structure. As the 3D assembly of the slices is controlled by embedded strings, it becomes an animatronic soft robot that moves like a biological creature and that shows life-like movements. We create a computational design algorithm that takes as input a desired 3D geometry of the robot, and that produces a 2D surface with built-in folds and string-based actuators. This paper describes the entire robot design process and demonstrates various animatronic motions, highlighting the vision of desktop fabrication technology and its potential applications in animatronics and robotic art.

The low-resolution 3D-structure of porin, a channel-forming protein in E. coliouter membranes

1983 ◽  
Vol 41 ◽  
pp. 440-441
Author(s):  
A. Engel ◽  
D.L. Dorset ◽  
A. Massalski ◽  
J.P. Rosenbusch
Keyword(s):  
Crystal Packing ◽  
3D Structure ◽  
Gram Negative Bacteria ◽  
Protein Ratio ◽  
Crystal Forms ◽  
Large Molecules ◽  
Functional Studies ◽  
Voltage Dependent ◽  
Planar Membranes ◽  
Hexagonal Arrays

Porins represent a group of channel forming proteins that facilitate diffusion of small solutes across the outer membrane of Gram-negative bacteria, while excluding large molecules (>650 Da). Planar membranes reconstituted from purified matrix porin (OmpF protein) trimers and phospholipids have allowed quantitative functional studies of the voltage-dependent channels and revealed concerted activation of triplets. Under the same reconstitution conditions but using high protein concentrations porin aggregated to 2D lattices suitable for electron microscopy and image processing. Depending on the lipid-to- protein ratio three different crystal packing arrangements were observed: a large (a = 93 Å) and a small (a = 79 Å) hexagonal and a rectangular (a = 79 Å b = 139 Å) form with p3 symmetry for the hexagonal arrays. In all crystal forms distinct stain filled triplet indentations could be seen and were found to be morphologically identical within a resolution of (22 Å). It is tempting to correlate stain triplets with triple channels, but the proof of this hypothesis requires an analysis of the structure in 3 dimensions.

3-D optical transfer in excitation field synthesis microscopes

1995 ◽  
Vol 53 ◽  
pp. 64-65
Author(s):  
Vijay Krishnamurthi ◽  
Brent Bailey ◽  
Frederick Lanni
Keyword(s):  
Standing Wave ◽  
Spatial Information ◽  
3D Structure ◽  
Complete Recovery ◽  
Weighting Factor ◽  
Optical Transfer Function ◽  
Excitation Field ◽  
Optical Transfer ◽  
Set Up ◽  
Focus Plane

Excitation field synthesis (EFS) refers to the use of an interference optical system in a direct-imaging microscope to improve 3D resolution by axially-selective excitation of fluorescence within a specimen. The excitation field can be thought of as a weighting factor for the point-spread function (PSF) of the microscope, so that the optical transfer function (OTF) gets expanded by convolution with the Fourier transform of the field intensity. The simplest EFS system is the standing-wave fluorescence microscope, in which an axially-periodic excitation field is set up through the specimen by interference of a pair of collimated, coherent, s-polarized beams that enter the specimen from opposite sides at matching angles. In this case, spatial information about the object is recovered in the central OTF passband, plus two symmetric, axially-shifted sidebands. Gaps between these bands represent "lost" information about the 3D structure of the object. Because the sideband shift is equal to the spatial frequency of the standing-wave (SW) field, more complete recovery of information is possible by superposition of fields having different periods. When all of the fields have an antinode at a common plane (set to be coincident with the in-focus plane), the "synthesized" field is peaked in a narrow infocus zone.

Methods for three-dimensional reconstruction of cellular components within a thick section

1986 ◽  
Vol 44 ◽  
pp. 18-21
Author(s):  
J. Frank ◽  
B. F. McEwen ◽  
M. Radermacher ◽  
C. L. Rieder
Keyword(s):  
Tilt Angle ◽  
Tomographic Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Thick Section ◽  
Three Dimensional Reconstruction ◽  
Axis Ratio ◽  
Dimensional Reconstruction ◽  
Cellular Components

The tomographic reconstruction from multiple projections of cellular components, within a thick section, offers a way of visualizing and quantifying their three-dimensional (3D) structure. However, asymmetric objects require as many views from the widest tilt range as possible; otherwise the reconstruction may be uninterpretable. Even if not for geometric obstructions, the increasing pathway of electrons, as the tilt angle is increased, poses the ultimate upper limitation to the projection range. With the maximum tilt angle being fixed, the only way to improve the faithfulness of the reconstruction is by changing the mode of the tilting from single-axis to conical; a point within the object projected with a tilt angle of 60° and a full 360° azimuthal range is then reconstructed as a slightly elliptic (axis ratio 1.2 : 1) sphere.

Assembly of VP26 in herpes simplex virus-1 capsid implicated by 3-D structure of recombinant capsid

1995 ◽  
Vol 53 ◽  
pp. 840-841
Author(s):  
Z. Hong Zhou ◽  
Jing He ◽  
Joanita Jakana ◽  
J. D. Tatman ◽  
Frazer J. Rixon ◽  
...  
Keyword(s):  
Herpes Simplex Virus ◽  
Herpes Simplex ◽  
3D Structure ◽  
Structure Study ◽  
Herpes Simplex Virus 1 ◽  
Shell Proteins ◽  
Life Threatening ◽  
Infected Cells ◽  
Simplex Virus ◽  
Hsv 1

Herpes simplex virus-1 (HSV-1) is a ubiquitous virus which is implicated in diseases ranging from self-curing cold sores to life-threatening infections. The 2500 Å diameter herpes virion is composed of a glycoprotein spike containing, lipid envelope, enclosing a protein layer (the tegument) in which is embedded the capsid (which contains the dsDNA genome). The B-, and A- and C-capsids, representing different morphogenetic stages in HSV-1 infected cells, are composed of 7, and 5 structural proteins respectively. The three capsid types are organized in similar T=16 icosahedral shells with 12 pentons, 150 hexons, and 320 connecting triplexes. Our previous 3D structure study at 26 Å revealed domain features of all these structural components and suggested probable locations for the outer shell proteins, VP5, VP26, VP19c and VP23. VP5 makes up most of both pentons and hexons. VP26 appeared to bind to the VP5 subunit in hexon but not to that in penton.

Cryomicroscopy of crotoxin complex crystals at 400 KV

1989 ◽  
Vol 47 ◽  
pp. 826-827
Author(s):  
Jaap Brink ◽  
Wah Chiu
Keyword(s):  
Signal To Noise Ratio ◽  
3D Structure ◽  
Three Dimensional ◽  
Carbon Films ◽  
Depth Of Field ◽  
Basic Subunit ◽  
Ewald Sphere ◽  
Diffraction Patterns ◽  
Complex Crystals ◽  
Acidic Subunit

The crotoxin complex is a potent neurotoxin composed of a basic subunit (Mr = 12,000) and an acidic subunit (M = 10,000). The basic subunit possesses phospholipase activity whereas the acidic subunit shows no enzymatic activity at all. The complex's toxocity is expressed both pre- and post-synaptically. The crotoxin complex forms thin crystals suitable for electron crystallography. The crystals diffract up to 0.16 nm in the microscope, whereas images show reflections out to 0.39 nm2. Ultimate goal in this study is to obtain a three-dimensional (3D-) structure map of the protein around 0.3 nm resolution. Use of 100 keV electrons in this is limited; the unit cell's height c of 25.6 nm causes problems associated with multiple scattering, radiation damage, limited depth of field and a more pronounced Ewald sphere curvature. In general, they lead to projections of the unit cell, which at the desired resolution, cannot be interpreted following the weak-phase approximation. Circumventing this problem is possible through the use of 400 keV electrons. Although the overall contrast is lowered due to a smaller scattering cross-section, the signal-to-noise ratio of especially higher order reflections will improve due to a smaller contribution of inelastic scattering. We report here our preliminary results demonstrating the feasability of the data collection procedure at 400 kV.Crystals of crotoxin complex were prepared on carbon-covered holey-carbon films, quench frozen in liquid ethane, inserted into a Gatan 626 holder, transferred into a JEOL 4000EX electron microscope equipped with a pair of anticontaminators operating at −184°C and examined under low-dose conditions. Selected area electron diffraction patterns (EDP's) and images of the crystals were recorded at 400 kV and −167°C with dose levels of 5 and 9.5 electrons/Å, respectively.

Quantitative structure determination of interfaces through Z-contrast imaging and electron energy loss spectroscopy

1996 ◽  
Vol 54 ◽  
pp. 104-105
Author(s):  
S. J. Pennycook ◽  
P. D. Nellist ◽  
N. D. Browning ◽  
P. A. Langjahr ◽  
M. Rühle
Keyword(s):  
Grain Boundaries ◽  
Cuprate Superconductors ◽  
Structure Refinement ◽  
3D Structure ◽  
Real Space ◽  
Contrast Imaging ◽  
Coordination Polyhedra ◽  
Burgers Vector ◽  
Z Contrast ◽  
Contrast Image

The simultaneous use of Z-contrast imaging with parallel detection EELS in the STEM provides a powerful means for determining the atomic structure of grain boundaries. The incoherent Z-contrast image of the high atomic number columns can be directly inverted to their real space arrangement, without the use of preconceived structure models. Positions and intensities may be accurately quantified through a maximum entropy analysis. Light elements that are not visible in the Z-contrast image can be studied through EELS; their coordination polyhedra determined from the spectral fine structure. It even appears feasible to contemplate 3D structure refinement through multiple scattering calculations.The power of this approach is illustrated by the recent study of a series of SrTiC>3 bicrystals, which has provided significant insight into some of the basic issues of grain boundaries in ceramics. Figure 1 shows the structural units deduced from a set of 24°, 36° and 65° symmetric boundaries, and 24° and 45° asymmetric boundaries. It can be seen that apart from unit cells and fragments from the perfect crystal, only three units are needed to construct any arbitrary tilt boundary. For symmetric boundaries, only two units are required, each having the same Burgers, vector of a<100>. Both units are pentagons, on either the Sr or Ti sublattice, and both contain two columns of the other sublattice, imaging in positions too close for the atoms in each column to be coplanar. Each column was therefore assumed to be half full, with the pair forming a single zig-zag column. For asymmetric boundaries, crystal geometry requires two types of dislocations; the additional unit was found to have a Burgers’ vector of a<110>. Such a unit is a larger source of strain, and is especially important to the transport characteristics of cuprate superconductors. These zig-zag columns avoid the problem of like-ion repulsion; they have also been seen in TiO2 and YBa2Cu3O7-x and may be a general feature of ionic materials.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

Sign in / Sign up

Export Citation Format

Share Document