scholarly journals Porous Sponges from the Mesocarp of Theobroma Cacao L. Pod Shells for Potential Biomaterial Applications

Bionatura ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 1529-1539
Author(s):  
Sandra Heredia ◽  
Diego Costa ◽  
Iván Choez ◽  
Ana Barragan ◽  
María F. Quijano ◽  
...  
Keyword(s):  
Three Dimensional ◽  
High Water ◽  
Alkaline Treatment ◽  
In Vitro Cytotoxicity ◽  
Treatment Temperature ◽  
Cellulose Content ◽  
Cell Proliferation And Differentiation ◽  
Biomaterial Application

Lignocellulosic materials have garnered significant attention in recent years to generate biomaterials, but nothing has been investigated with cacao residues of significant importance in Ecuador. This study's objective was to generate porous, three-dimensional sponges from cacao pod shell mesocarp with potential use in biomaterial application. Discs from the mesocarp of cacao pod shells were subjected to neutral, acid, and alkaline treatments, at 25oC and 100oC, followed by washing and lyophilization. Sponge composition was evaluated, with the alkaline treatment resulting in the highest cellulose content and the lowest percentage of lignin, with the removal of hemicellulose corroborated by FITR. The sponges presented high water absorption capacities, which increased with the treatment temperature; mainly, the alkaline generated structures had the largest capacity. The sponges' porosity also depended on the treatment, with the acid and alkaline treatments generating larger pores, which significantly grew with treatment temperature. Preliminary in vitro cytotoxicity tests were carried out using Wharton's jelly mesenchymal stem cells, according to ISO 10993.5.2009, with none of the materials being cytotoxic; however, those with greater lignin contents resulted in lower cell viability. In general, it is considered that the alkaline generated sponges presented the more significant potential for biomaterial applications, which could be further tested with In vitro cell proliferation and differentiation studies and possible in vivo assays.

scholarly journals Design Strategies of Conductive Hydrogel for Biomedical Applications

Molecules ◽  
2020 ◽  
Vol 25 (22) ◽  
pp. 5296
Author(s):  
Junpeng Xu ◽  
Yu-Liang Tsai ◽  
Shan-hui Hsu
Keyword(s):  
Three Dimensional ◽  
High Water ◽  
Biochemical Properties ◽  
Dimensional Structure ◽  
High Water Content ◽  
Design Strategies ◽  
Conductive Hydrogel ◽  
Biomedical Field

Conductive hydrogel, with electroconductive properties and high water content in a three-dimensional structure is prepared by incorporating conductive polymers, conductive nanoparticles, or other conductive elements, into hydrogel systems through various strategies. Conductive hydrogel has recently attracted extensive attention in the biomedical field. Using different conductivity strategies, conductive hydrogel can have adjustable physical and biochemical properties that suit different biomedical needs. The conductive hydrogel can serve as a scaffold with high swelling and stimulus responsiveness to support cell growth in vitro and to facilitate wound healing, drug delivery and tissue regeneration in vivo. Conductive hydrogel can also be used to detect biomolecules in the form of biosensors. In this review, we summarize the current design strategies of conductive hydrogel developed for applications in the biomedical field as well as the perspective approach for integration with biofabrication technologies.

In vitro and in vivo evaluation of porous chitosan electret membrane for bone regeneration

2018 ◽  
Vol 33 (4) ◽  
pp. 426-438 ◽  
Author(s):  
Yanying Wang ◽  
Xiaodi Sun ◽  
Qingfu Wang ◽  
Jing Yang ◽  
Ping Gong ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Three Dimensional ◽  
Surface Charges ◽  
In Vivo Evaluation ◽  
Thermally Induced ◽  
Cell Proliferation And Differentiation ◽  
Porous Chitosan ◽  
Calvarial Defects

A porous chitosan electret membrane, possessing a three-dimensional porous structure and surface charges, was developed using thermally induced phase separation method and grid-controlled corona charging. Results showed that surface charge release of porous electret membrane could be altered by varying charging voltage. Rat osteoblasts adhered well, and cell proliferation and differentiation were enhanced by porous electret membrane compared to porous uncharged membrane. Furthermore, rabbit calvarial defects model demonstrated that porous electret membrane promoted bone regeneration more significantly than porous uncharged membrane. Therefore, the porous chitosan electret membrane might be a promising material for bone regeneration and bone tissue engineering applications.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Mixed Micelles as Nano Polymer Therapeutics of Docetaxel: Increased In vitro Cytotoxicity and Decreased In vivo Toxicity

2018 ◽  
Vol 15 (4) ◽  
pp. 564-575 ◽  
Author(s):  
Arehalli S. Manjappa ◽  
Popat S. Kumbhar ◽  
Prajakta S. Khopade ◽  
Ajit B. Patil ◽  
John I. Disouza
Keyword(s):  
Mixed Micelles ◽  
In Vitro Cytotoxicity ◽  
Polymer Therapeutics ◽  
In Vivo Toxicity

Mannose Conjugated Starch Nanoparticles for Preferential Targeting of Liver Cancer

2020 ◽  
Vol 17 ◽  
Author(s):  
Akhlesh Kumar Jain ◽  
Hitesh Sahu ◽  
Keerti Mishra ◽  
Suresh Thareja
Keyword(s):  
Side Effects ◽  
Liver Cancer ◽  
Entrapment Efficiency ◽  
Xrd Analysis ◽  
In Vitro Cytotoxicity ◽  
Physical Interaction ◽  
Scanning Calorimetry ◽  
Starch Nanoparticles

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.

Epithelial Organotypic Cultures: A Viable Model to Address Mechanisms of Carcinogenesis by Epitheliotropic Viruses

2018 ◽  
Vol 18 (4) ◽  
pp. 246-255 ◽  
Author(s):  
Lara Termini ◽  
Enrique Boccardo
Keyword(s):  
Three Dimensional ◽  
Cell Types ◽  
Experimental Models ◽  
Biological Research ◽  
Specific Gene ◽  
Specific Cell ◽  
Organotypic Cultures ◽  
Skin Physiology

In vitro culture of primary or established cell lines is one of the leading techniques in many areas of basic biological research. The use of pure or highly enriched cultures of specific cell types obtained from different tissues and genetics backgrounds has greatly contributed to our current understanding of normal and pathological cellular processes. Cells in culture are easily propagated generating an almost endless source of material for experimentation. Besides, they can be manipulated to achieve gene silencing, gene overexpression and genome editing turning possible the dissection of specific gene functions and signaling pathways. However, monolayer and suspension cultures of cells do not reproduce the cell type diversity, cell-cell contacts, cell-matrix interactions and differentiation pathways typical of the three-dimensional environment of tissues and organs from where they were originated. Therefore, different experimental animal models have been developed and applied to address these and other complex issues in vivo. However, these systems are costly and time consuming. Most importantly the use of animals in scientific research poses moral and ethical concerns facing a steadily increasing opposition from different sectors of the society. Therefore, there is an urgent need for the development of alternative in vitro experimental models that accurately reproduce the events observed in vivo to reduce the use of animals. Organotypic cultures combine the flexibility of traditional culture systems with the possibility of culturing different cell types in a 3D environment that reproduces both the structure and the physiology of the parental organ. Here we present a summarized description of the use of epithelial organotypic for the study of skin physiology, human papillomavirus biology and associated tumorigenesis.

scholarly journals The Revolutionary Roads to Study Cell–Cell Interactions in 3D In Vitro Pancreatic Cancer Models

Cancers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 930
Author(s):  
Donatella Delle Cave ◽  
Riccardo Rizzo ◽  
Bruno Sainz ◽  
Giuseppe Gigli ◽  
Loretta L. del Mercato ◽  
...  
Keyword(s):  
Pancreatic Cancer ◽  
Therapeutic Response ◽  
Three Dimensional ◽  
Cellular Models ◽  
Common Cancer ◽  
Cancer Models ◽  
Anti Cancer ◽  
Tumor Environment

Pancreatic cancer, the fourth most common cancer worldwide, shows a highly unsuccessful therapeutic response. In the last 10 years, neither important advancements nor new therapeutic strategies have significantly impacted patient survival, highlighting the need to pursue new avenues for drug development discovery and design. Advanced cellular models, resembling as much as possible the original in vivo tumor environment, may be more successful in predicting the efficacy of future anti-cancer candidates in clinical trials. In this review, we discuss novel bioengineered platforms for anticancer drug discovery in pancreatic cancer, from traditional two-dimensional models to innovative three-dimensional ones.

Three-dimensional Growth of Renal Epithelial Cells in Vitro: A Tool in Toxicity Testing

1993 ◽  
Vol 21 (2) ◽  
pp. 191-195 ◽  
Author(s):  
Knut-Jan Andersen ◽  
Erik Ilsø Christensen ◽  
Hogne Vik
Keyword(s):  
Epithelial Cells ◽  
Three Dimensional ◽  
Toxicity Testing ◽  
Renal Tissue ◽  
Epithelial Cell Line ◽  
Multicellular Spheroids ◽  
Renal Epithelial Cell ◽  
Renal Epithelial Cells

The tissue culture of multicellular spheroids from the renal epithelial cell line LLC-PK1 (proximal tubule) is described. This represents a biological system of intermediate complexity between renal tissue in vivo and simple monolayer cultures. The multicellular structures, which show many similarities to kidney tubules in vivo, including a vectorial water transport, should prove useful for studying the potential nephrotoxicity of drugs and chemicals in vitro. In addition, the propagation of renal epithelial cells as multicellular spheroids in serum-free culture may provide information on the release of specific biological parameters, which may be suppressed or masked in serum-supplemented media.

scholarly journals A molecular architectural design that promises potent antimicrobial activity against multidrug-resistant pathogens

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Bing Yuan ◽  
Jiaojiao Liu ◽  
Zhixiong Deng ◽  
Lin Wei ◽  
Wenwen Li ◽  
...  
Keyword(s):  
Architectural Design ◽  
Building Blocks ◽  
Multidrug Resistant ◽  
In Vitro Cytotoxicity ◽  
Antimicrobial Drugs ◽  
Minimal Inhibitory Concentrations ◽  
Antimicrobial Efficiency ◽  
Multidrug Resistant Pathogens

AbstractAddressing the devastating threat of drug-resistant pathogens requires the discovery of new antibiotics with advanced action mechanisms and/or novel strategies for drug design. Herein, from a biophysical perspective, we design a class of synthetic antibacterial complexes with specialized architectures based on melittin (Mel), a natural antimicrobial peptide, and poly(ethylene glycol) (PEG), a clinically available agent, as building blocks that show potent and architecture-modulated antibacterial activity. Among the complexes, the flexibly linear complex consisting of one Mel terminally connected with a long-chained PEG (e.g., PEG12k–1*Mel) shows the most pronounced improvement in performance compared with pristine Mel, with up to 500% improvement in antimicrobial efficiency, excellent in vitro activity against multidrug-resistant pathogens (over a range of minimal inhibitory concentrations of 2–32 µg mL−1), a 68% decrease in in vitro cytotoxicity, and a 57% decrease in in vivo acute toxicity. A lipid-specific mode of action in membrane recognition and an accelerated “channel” effect in perforating the bacterial membrane of the complex are described. Our results introduce a new way to design highly efficient and low-toxicity antimicrobial drugs based on architectural modulations with clinically available agents.

scholarly journals Mammary gland 3D cell culture systems in farm animals

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Laurence Finot ◽  
Eric Chanat ◽  
Frederic Dessauge
Keyword(s):  
Cell Culture ◽  
Mammary Gland ◽  
Bacterial Infections ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Farm Animals ◽  
Culture Systems ◽  
Cell Culture Systems

AbstractIn vivo study of tissue or organ biology in mammals is very complex and progress is slowed by poor accessibility of samples and ethical concerns. Fortunately, however, advances in stem cell identification and culture have made it possible to derive in vitro 3D “tissues” called organoids, these three-dimensional structures partly or fully mimicking the in vivo functioning of organs. The mammary gland produces milk, the source of nutrition for newborn mammals. Milk is synthesized and secreted by the differentiated polarized mammary epithelial cells of the gland. Reconstructing in vitro a mammary-like structure mimicking the functional tissue represents a major challenge in mammary gland biology, especially for farm animals for which specific agronomic questions arise. This would greatly facilitate the study of mammary gland development, milk secretion processes and pathological effects of viral or bacterial infections at the cellular level, all with the objective of improving milk production at the animal level. With this aim, various 3D cell culture models have been developed such as mammospheres and, more recently, efforts to develop organoids in vitro have been considerable. Researchers are now starting to draw inspiration from other fields, such as bioengineering, to generate organoids that would be more physiologically relevant. In this chapter, we will discuss 3D cell culture systems as organoids and their relevance for agronomic research.

Sign in / Sign up

Export Citation Format

Share Document