Biochemical Changes during Alcoholic Fermentation in the Production of ``Tchapalo'', a Traditional Sorghum Beer

Author(s):  
Marcellin Koffi Djè ◽  
Kouadio Florent N'Guessan ◽  
Theodore N'Dede Djeni ◽  
Thomas Adjehi Dadie

The production of tchapalo remains more or less an empirical process. For the improvement of the product quality, there is a need of more knowledge on this traditional process and the beer characteristics. The alcoholic fermentation is one of the most steps which most determines the quality of the beer. In this study, the characteristics of the traditional starter and the evolution of temperature, ethanol, sugars and organic acids were assessed at small-scale production during alcoholic fermentation of tchapalo. Brewers used traditional starter at the rate of 0.76-0.88 % when it was dried or at 2.38 % when it was not. When the wort was at 36.6-39.3 °C, the starter was added to initiate the fermentation. Temperature decreased to 34.6-36.5 °C at the end of the fermentation which was concluded after 7.6 h to 8.4 h. Sugars were consumed during the fermentation but it remained 12.9 to 16.57 g/L of reducing sugars and 8.02 to 9.12 °Brix of TSS in the final product. Ethanol content increased from 0.02-0.35 % (v/v) in the wort to 3.5-4.59 % in the beer. The oxalic, citric, tartaric, malic, lactic, fumaric and propionic acids were found in the wort and in tchapalo and increased or decreased during fermentation differently from one site to another. But, the acetic acid was not always detected in both the wort and the beer.

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Lukman M Baga

success of an integrate agribusiness system of a commodity must be followed by the increase of farmers’ bargain position, especially the small scale agribusiness runs by farmers. Otherwise, farmer will continue to be marginalized, and sustainable production is hard to be achieved. Farmer organization in Indonesia is relatively has weak position and cannot improve farmers’ bargain position since it is still in social institution form (i.e. farmer group), and yet become a socio-economic institution (cooperative). In many countries, farmers’ cooperative not only improves the production, productivity and product quality, but also lead to increase in welfare and life quality of its members. This study specifically aimed to develop corn farmer co-operative in Gorontalo Province. SWOT analysis was being used to formulate the strategy, followed by strategy mapping in road-map as guidance for local government to develop corn farmer co-operative that suitable with its character.Keyword: agribusiness, corn, farmer group, farmer co-operative, Gorontalo.


2014 ◽  
Vol 32 (No. 1) ◽  
pp. 69-76 ◽  
Author(s):  
H. Zhao ◽  
F. Zhou ◽  
P. Dziugan ◽  
Y. Yao ◽  
J. Zhang ◽  
...  

The effect of malolactic fermentation (MLF) on the flavour quality of cider was examined. Leuconostoc mesenteroides subsp. mesenteroides Z25 was used to start MLF taking place at 25°C for 12 days after the completion of alcoholic fermentation (AF) by Saccharomyces cerevisiae. Strain Z25 showed good activity in starting MLF of cider with 10% alcoholic concentration. The content of malic acid, whose high concentration gives negative organoleptic characteristics to the cider, dropped significantly from 4.0 g/l to 0.25 g/l via MLF. The concentration of lactic acid increased significantly from 0.99 g/l to 3.50 g/l, contributing to volatile acidity. The acetic acid content of the ciders was 0.74 g/l. Among 51 volatile compounds detected by GC-MS, higher alcohols, esters, and carbonyl compounds were formed in ciders through MLF. The total concentration of aromatic substances doubled compared to the controls. The occurrence of MLF started by strain Z25 enabled the cider containing more volatile compounds and an acceptable adjustment of organic acids. This is the first report on using L. mesenteroides subsp. mesenteroides strain Z25 to start the MLF of apple wine improving the flavour quality of the cider produced.  


2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
Chae Eun Song ◽  
Han Hyo Shim ◽  
Palaniselvam Kuppusamy ◽  
Young-IL Jeong ◽  
Kyung Dong Lee

The objective of this study was to investigate alginate microencapsulated lactic acid bacteria (LAB) fermentation quality of radish kimchi sample and its potential survivability in different acidic and alkaline environments. Initially, we isolated 45 LAB strains. One of them showed fast growth pattern with potential probiotic and antifungal activities against Aspergillus flavus with a zone of inhibition calculated with 10, 8, 4mm for the 4th, 5th, and 6th day, respectively. Therefore, this strain (KCC-42) was chosen for microencapsulation with alginate biopolymer. It showed potential survivability in in-vitro simulated gastrointestinal fluid and radish kimchi fermentation medium. The survival rate of this free and encapsulated LAB KCC-42 was 6.85 × 105 and 7.48× 105 CFU/ml, respectively; the viability count was significantly higher than nonencapsulated LAB in simulated gastrointestinal juices (acid, bile, and pancreatin) and under radish kimchi fermentation environment. Kimchi sample added with this encapsulated LAB showed increased production of organic acids compared to nonencapsulated LAB sample. Also, the organic acids such as lactic acid, acetic acid, propionic acid, and succinic acid production in fermented kimchi were measured 59mM, 26mM, 14mM, and 0.6mM of g/DW, respectively. The production of metabolites such as lactic acid, acetic acid, and succinic acid and the bacteria population was high in microencapsulated LAB samples compared with free bacteria added kimchi sample. Results of this study indicate that microencapsulated LAB KCC-42 might be a useful strategy to develop products for food and healthcare industries.


1988 ◽  
Vol 55 (2) ◽  
pp. 247-254 ◽  
Author(s):  
Christophoros Pappas ◽  
Leandros Voutsinas

SummaryWhen 10% citric, lactic or acetic acid was added to sheep's milk cheese whey during its heating for Myzithra cheese preparation, protein retention in the cheese was increased. Acidification of whey to pH 5·2 with lactic acid before heating followed by readjustment to pH 5·8 with NaOH was considered to be the best treatment for practical use, increasing whey protein retention in the cheese and yield without loss of flavour, aroma or texture.


Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 222
Author(s):  
Driss Ousaaid ◽  
Hamza Mechchate ◽  
Hassan Laaroussi ◽  
Christophe Hano ◽  
Meryem Bakour ◽  
...  

The popularity of fruits vinegar (FsV) has been increased recently as a healthy drink wealthy in bioactive compounds that provide several beneficial properties. This review was designed in the frame of valorization of fruits vinegar as a by-product with high value added by providing overall information on its biochemical constituents and beneficial potencies. It contains a cocktail of bioactive ingredients including polyphenolic acids, organic acids, tetramethylperazine, and melanoidins. Acetic acid is the most abundant organic acid and chlorogenic acid is the major phenol in apple vinegar. The administration of fruits vinegar could prevent diabetes, hypercholesterolemia, oxidative stress, cancer, and boost immunity as well as provide a remarkable antioxidant ability. The production techniques influence the quality of vinegar, and consequently, its health benefits.


2021 ◽  
Vol 12 ◽  
Author(s):  
Ana Paulina Arellano Pineda ◽  
Gabriela Zampieri Campos ◽  
Natan Jesus Pimentel-Filho ◽  
Bernadette Dora Gombossy de Melo Franco ◽  
Uelinton Manoel Pinto

Artisanal cheeses made with raw milk are highly appreciated products in Brazil. Most of these cheeses are produced in small facilities across different production regions in the country, some of which have been granted a protected designation of origin and are award winners. The most prominent state that manufactures these products is Minas Gerais (MG), but production is also gaining strength in other Brazilian states. The major challenge faced by artisanal cheese production is related to microbial risks associated with foodborne pathogens when the quality of the raw milk is unsatisfactory. Regulations created for the dairy industry are constantly been revised and adapted, considering the small-scale production of Brazilian artisanal cheeses, in order to guarantee safety at all steps of cheese production and commercialization. This text presents a summary of the huge diversity of artisanal cheeses produced in the country, grouped by geographical regions, and reviews the current challenges faced by producers and government considering the safety of these cheeses.


2020 ◽  
Vol 992 ◽  
pp. 461-466
Author(s):  
A.Yu. Korotchenko ◽  
D.E. Khilkov ◽  
M.V. Tverskoy ◽  
A.A. Khilkova

In this work, to reduce the cost of production of parts using injection molding metal technology (MIM technology), it is proposed to use additive technologies (AT) for the manufacture of green parts. The use of AT allows us to abandon expensive molds and expand the field of use of the MIM of technology in single and small-scale production. For manufacture of green parts, the technology of manufacturing fused filament (Fused Filament Fabrication – FFF) is offered. The original composition of the metal powder mix (feedstock) and the filament manufacturing modes for 3D printing have been developed for the FFF technology. The cost of filament is much lower than its analogs. The factors affecting the print quality of green part are considered. All factors are divided into two groups depending on the possibility of their change during printing. The research of the influence of the coefficient filament supply on the geometry of green parts during 3D printing is presented.


Author(s):  
Rabiah Mat Lazim ◽  
Nazmi Mat Nawi ◽  
Muhammad Hairie Masroon ◽  
Najidah Abdullah ◽  
Maryani Che Mohammad Iskandar

Agriculture remains as one of the important economic sectors in Malaysia which provides an employment for more than 1.6 million people. However, the growth of this sector may be hampered by a small-scale production, limited technological application, declining number of arable lands, environmental degradation due to climate change, rapid urbanization and aging farmers. In order to improve the competitiveness of the agricultural sector, farmers are encouraged to fully utilise modern technologies in their farms. In this context, adoption of industrial revolution 4.0 (IR4.0) in agricultural sector could bring many benefits, especially in minimizing the production costs and improving the quality of the products. Thus, this review focuses on the adoption strategies of IR4.0 into agricultural sector in Malaysia. A suitability of enabling technologies such as IoT, autonomous robot, big data analytics and artificial intelligent which are pillars for IR4.0 are individually evaluated. The readiness of agricultural industry in Malaysia to embrace this new concept is also discussed. The review also investigates the potentials and possible challenges would be faced by the industry in embracing IR4.0. The recommendations are also provided for farmers, industrial players and policy makes to makes sure a smooth adoption of IR4.0 into agricultural sector in Malaysia.


1969 ◽  
Vol 68 (4) ◽  
pp. 423-432
Author(s):  
Franklin W. Martin

Flours were made from mature storage roots of 26 varieties of sweet potato. Peeled roots were sliced or shredded and dried by solar heat with or without predrying cooking. Dried samples were milled, properties observed, and composition tested. Samples, when cooked often developed disagreeable color, odor, and taste. Such characteristics could be avoided with antioxidants or by sufficient cooking. During microwave baking a large part of the starch was converted to reducing sugars, resulting in a flour too sweet for domestic purposes.


2020 ◽  
Vol 72 (4) ◽  
pp. 183-194
Author(s):  
Viktoria Kapcsandi ◽  
Erika Lakatos Hanczne ◽  
Agnes Nagy ◽  
Rita Szekelyhidi

The aim of this study was to determine the effect of two yeast strains (Saccharomyces cerevisiae and S. bayanus) on the fermentation with or without additional pectinase. The organic acids products (tartaric, malic, and succinic acid), carbohydrates (glucose, fructose, and sucrose) utilized, and ethanol produced were examined by HPLC. The efficiency of fermentation was affected by several parameters such as the preparation procedure of the fruits, like temperature (18�C), yeast strain applied, pH adjustment (3.2), the dosage of yeast nutrient and application of pectinase. We have found that pectinase pre-treatment and S. cerevisiae could significantly alter the amount of the examined components, which changed the quality of the end product. We have also experienced significant (p≤0.05) differences in the sugar utilisation of yeast strains as well as organic acid contents in the different stages of fermentation, where the samples fermented with spontaneous and identified yeast strains.


Sign in / Sign up

Export Citation Format

Share Document