scholarly journals ALGINATE BASED GASTRO-RETENTIVE RAFT FORMING TABLETS FOR ENHANCED BIOAVAILABILITY OF TINIDAZOLE

2016 ◽  
Vol 9 (1) ◽  
pp. 16
Author(s):  
Sreejan Manna ◽  
Kanchi Jayasri ◽  
Kancherla Radha Annapurna ◽  
Lakshmi Kanta Kanthal
Keyword(s):  
Drug Release ◽  
Solid Dispersion ◽  
Hydroxypropyl Methylcellulose ◽  
Aqueous Solubility ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Major Barrier ◽  
Gastric Residence Time ◽  
Gastro Retentive

Objective: Tinidazole, a nitroimidazole derivative is having low aqueous solubility which is a major barrier for systemic drug absorption. The aim of the present research was to develop gastro retentive raft forming tablets of tinidazole to achieve prolonged gastric residence time and thus higher bioavailability.Methods: Solid dispersion of tinidazole was prepared by kneading method by using methanol and polyvinylpyrrolidone (PVP). Different concentration of sodium alginate and hydroxypropyl methylcellulose (HPMC) was used to formulate a suitable raft forming tablets and then evaluated for drug content, floating lag time, raft strength, raft volume, raft weight, drug release and release kinetics.Results: Fourier transform infra-red (FT-IR) study confirms compatibility between drug and polymer. The floating lag time was found in the range of 40±4 to 60±5 s for all the formulation. Raft strength for all the formulations was within the range from 3.03±0.12 to 5.92±0.06 g. The raft volume for all the formulation was found within the range of 7.37±1.86 to 9.84±2.76 ml. Raft weight was measured after completion of raft formation for each formulation and was found in the range of 5.21±1.17 to 7.88±1.95 g. In vitro dissolution was carried up to 8 h and percentage of drug release was found to vary between 79.71±2.18 to 94.32±1.79 %.Conclusion: It can be concluded that the combination of solid dispersion and raft formation increases the bioavailability of tinidazole in tablet formulation.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

scholarly journals FORMULATION AND EVALUATION OF GASTRORETENTIVE TABLETS OF ANTIULCER DRUG

2016 ◽  
Vol 9 (6) ◽  
pp. 48
Author(s):  
Pranali Shivaji Salunkhe
Keyword(s):  
Drug Release ◽  
Extended Period ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Gastric Residence Time ◽  
Target Drug ◽  
Weight Variation

ABSTRACTGastroretentive floating drug delivery system is utilised to target drug release in the stomach or to the upper part of intestine. Lansoprazole is proton pump inhibitor intended for oral administration used as antiulcer agent. The present investigation involved formulation and evaluation of Gastroretentive floating tablets of Lansoprazole for prolongation of gastric residence time with a view to deliver the drug at sustained and controlled manner in gastrointestinal tract. The tablets of Lansoprazole were prepared by direct compression method using gas generating agent and different polymer combinations (HPMCK4M, HPMC K100M, Psyllium husk) . The prepared tablets of Lansoprazole were evaluated for hardness, thickness, friability, weight variation, drug content uniformity, buoyancy lag time, total floating time, swelling index, in-vitro dissolution study. The varying concentration of gas generating agent and polymers were found to affect on in-vitro drug release, floating lag time and swelling index. In vitro drug release of floating Gastroretentive tablet of Lansoprazole shown that the formulation F2 was found to be the best formulation as it releases 97.9% Lansoprazole in a controlled manner for extended period of time (upto 12 hrs.)Keywords: Lansoprazole, Gastroretentive, floating tablet, total floating time.

scholarly journals Formulation and Pharmacokinetic Evaluation of Ritonavir Floating Tablets in the Management of AIDS

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
R. Shireesh Kiran ◽  
B. Chandra Shekar ◽  
B. Nagendra Babu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Controlled Drug Release ◽  
In Vitro Dissolution ◽  
Gastric Residence Time ◽  
Dissolution Studies ◽  
Floating Tablet ◽  
Gastro Retentive

In the current study, gastro-retentive tablets of Ritonavir was developed to increase its oral bioavailability using hydrophilic polymers HPMC K 4M, K 15M, and K 100M as release retarding agents. Polyox WSR 303 was chosen as resin, sodium bicarbonate was used as effervescent agents. The tablets were prepared by direct compression method and FTIR studies revealed that there is no interaction between the drug and polymers used for the formulation. Among all the formulations F21 containing HPMC K 100M, Crospovidone, Polyox WSR 303 and sodium bicarbonate, as gas generating agent was choosen as optimized formulation based on the evaluation parameters, floating lag time (33 sec) and total floating time (>24 h) and in vitro dissolution studies. From in vitro dissolution studies, the optimized formulation F21 and marketed product was shown 98.67% and 95.09 ± 5.01% of drug release respectively. From in vivo bioavailability studies, after oral administration of floating tablet containing 100 mg Ritonavir, the Cmax, Tmax, and AUC0–∞ of optimized gastroretentive formulation were found to be 30.11 ± 1.16μg/mL, 8.00±1.23 h and 173 ± 26.34μg*h/ml, respectively. Cmax and AUC values of optimized formulation were found to be significantly higher than of marketed product, where longer gastric residence time is an important condition for prolonged or controlled drug release and also for improved bioavailability.

scholarly journals Formulation Development and Evaluation of Sustain Release Gastroretentive Floating Tablets of Prochlorperazine Dimaleate

2019 ◽  
Vol 9 (4-s) ◽  
pp. 445-450
Author(s):  
Bharti Patle ◽  
Vivek Jain ◽  
Shradha Shende ◽  
Prabhat Kumar Jain
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Extended Period ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Compression Method ◽  
In Vitro Drug Release ◽  
Floating Tablets ◽  
Gastro Retentive

Floating drug delivery systems are the gastroretentive forms that precisely control the release rate of target drug to a specific site which facilitate an enormous impact on health care. The purpose of this research was to develop a novel gastro retentive drug delivery system based on direct compression method for sustained delivery of active agent to improve the bioavailability, reduce the number of doses and to increase patient compliance. Gastro retentive floating tablets of Prochlorperazine dimaleate (PCZ) were prepared by direct compression method using altered concentrations of HPMC K4, HPMC K15 and PVP K30 as polymers. The prepared tablets of PCZ were evaluated for hardness, thickness, friability, weight variation, drug content uniformity, buoyancy lag time, total floating time, in-vitro dissolution study, etc. All the compositions were resulted in adequate Pharmacopoeial limits. Compatibility studies was execution during FTIR shown that there was absence of probable chemical interaction between pure drug and excipients. The varying concentration of gas generating agent and polymers was found to affect on in-vitro drug release and floating lag time. In vitro drug release of floating gastro retentive tablet of PCZ shown that the formulation F9 was found to be the best formulation as it releases 98.89% in a controlled manner for an extended period of time (up to 12 hrs). The release data was fitted to various mathematical models such as Higuchi, Korsmeyer-Peppas, First order and Zero order to evaluate the kinetics and mechanism of the drug release. The optimized formulation (F9) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months.  Prepared floating tablets of PCZ may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system. Keywords: Prochlorperazine dimaleate, Floating tablet, Gastro retentive, Total floating time.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

scholarly journals Design, Development and Evaluation of Instant Release Oral Thin Films of Flunarizine

2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Asfiya Fatima ◽  
Mamatha Tirunagari ◽  
Divya Theja Chilekampalli
Keyword(s):  
Thin Films ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Rapid Onset ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Onset Of Action ◽  
Weight Variation ◽  
Accelerated Stability

The main objective of the present study was to prepare and evaluate the instant release oral thin films of Flunarizine, in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The instant release oral thin films of Flunarizine were prepared by solvent casting method using film forming polymer like Hydroxypropyl Methylcellulose E-15. The film was evaluated for various physicochemical parameters that include thickness, weight variation, folding endurance, tensile strength, drug content and in vitro drug release studies. No differences were observed in in vitro dissolution of drug from the formulated film F1-F9 as the film instantly gets wet by dissolution medium. The drug release for F5 formulations was about 98.1%. The accelerated stability studies for the optimized film formulations F5 were performed that indicates that the formulated instant release oral thin films were unaffected after initial and 3 months storage under accelerated conditions.

scholarly journals Formulation of Ramipril Tablets Containing Solid Dispersion Employing Selective Polymers to Enhance Dissolution Rate

2020 ◽  
Vol 10 (3-s) ◽  
pp. 142-149
Author(s):  
Inder Kumar ◽  
Sandeep Verma ◽  
Amit Chaudhary
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Phosphate Buffer ◽  
Flow Property ◽  
In Vitro Dissolution ◽  
Standard Data ◽  
Evaporation Technique ◽  
Good Flow

Objective: The present work based on formulation of Ramipril tablets containing solid dispersion employing selective polymers. The objective of the preparation is to prepare the solid dispersion of the Ramipril, which has more responsive value in terms of the dissolution rate. Method: Solid dispersion complex was prepared with two different carriers PEG 6000 and PVP K30. Nine formulations were developed and each formulation were subjected to pre compression and post compression parameters. Result and Discussion:  Pre-compression and post compression parameters were studied which had shown good flow property and compiled the standard data. In-vitro dissolution studies shows more than 90 % drug release in phosphate buffer pH 6.8 in 30 min. Out of all formulation F4 showed 92.55±0.67 % drug release with in 30min which was the best result rest of the formulation. Conclusion: Ramipril tablets were successfully prepared and evaluated. F4 formulation shows the greater dissolution rate in phosphate buffer pH 6.8 as compared to other formulations. When compared with marketed formulation it also shows better results. Therefore, Ramipril solid dispersion tablets enhanced the dissolution rate and can be more efficacious for improving oral bioavailability of Ramipril. Keywords: Solid dispersion, Ramipril, Solvent Evaporation Technique.

scholarly journals Formulation and Evaluation of Floating Matrix Tablets of Sacubitril and Valsartan

2019 ◽  
Vol 9 (4-s) ◽  
pp. 298-309
Author(s):  
Sudhakar Pathak ◽  
Harish Pandey ◽  
Sunil Kumar Shah
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Potential Candidate ◽  
In Vitro Drug Release ◽  
Gastric Emptying Rate ◽  
Floating Tablets

Floating Drug Delivery Systems (FDDS) have a bulk density lower than gastric fluids and thus remain buoyant in the stomach for a prolonged period of time, without affecting the gastric emptying rate. While the system is floating on the gastric contents, the drug is released slowly at a desired rate from the system. These floating tablets mainly prepared for reduction of lag time and release the drug up to 12 hours and may also increase the bioavailability of the drugs by utilizing the drug to full extent avoiding unnecessary frequency of dosing. The purpose of this research was to develop and evaluated floating matrix tablets of sacubitril and valsartan. The floating matrix tablets of sacubitril and valsartan were prepared by direct compression method using altered concentrations of HPMC K4M, HPMC K100M, sodium alginate as polymers and sodium bicarbonate, citric acid as gas generating agent. FTIR, DSC studies conformed that there was no incompatibility between the polymers and the drug. Tablet preformulation parameters were within the pharmacopoeias limit. Tablets were evaluated by different parameters such as weight uniformity, content uniformity, thickness, hardness, in vitro release studies, buoyancy determination and kinetic analysis of dissolution data. The varying concentration of gas generating agent and polymers was found to affect on in-vitro drug release and floating lag time. Tablet showed ≤ 1min lag time, continuance of buoyancy for >12 h. The in-vitro drug release pattern of sacubitril and valsartan optimized floating tablets (F16) was fitted to different kinetic models which showed highest regression (r2 = 0.9838) for Higuchi model. The Optimized formulation (F16) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months.  Prepared floating tablets of sacubitril and valsartan may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system.  

scholarly journals Financial Soundness and Shareholder Value of Private Banks in India

2018 ◽  
Vol 5 (01) ◽  
Author(s):  
K. Abirami
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
X Ray Diffraction ◽  
Ftir Studies ◽  
Private Banks ◽  
Financial Soundness ◽  
Physical Mixtures

The objective of this study was to develop solid dispersions of Nifedipine which has low aqueous solubility and bioavailability. Preliminary solubility studies were carried out using various hydrophilic polymers. The formulations were then optimized and evaluated by in-vitro dissolution studies, X-ray diffraction, FTIR and SEM. Formulation with 1:4:2 ratios of Nifedipine, Labrosol and SLS was found to be the best as it possessed better drug release properties compared to pure drug and other physical mixtures. The optimized formulation SD12 was found to have better drug release of 98.74±5.19% in 90 minutes. From FTIR studies no interaction was takes place between drug and polymers. XRD peaks indicate the successful transformation of drug from crystalline to amorphous form. The final results indicate that the solid dispersion of Nifedipine remained stable over 90 days.

scholarly journals DESIGN EXPERT SUPPORTED FORMULATION DEVELOPMENT, MATHEMATICAL OPTIMIZATION AND PREDICTABILITY STUDY OF FLOATING TABLETS OF BISOPROLOL FUMARATE

2021 ◽  
pp. 242-248
Author(s):  
SHAIKH SHAOOR AHMAD ◽  
SHAIKH SIRAJ N. ◽  
PATEL M. SIDDIK ◽  
KHALIFA MAHMADASIF YUNUS ◽  
MAKRANI SHAHARUKH I. ◽  
...  
Keyword(s):  
Drug Release ◽  
Scale Up ◽  
Mathematical Optimization ◽  
Lag Time ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Formulation Development ◽  
Floating Tablets ◽  
Design Expert

Objective: Focus of the study was to formulate Design expert Software assisted floating tablet of Bisoprolol Fumarate. Bisoprolol Fumarate is a Beta adrenergic blocking agent, used to treat cardiac diseases favorable characters to be formulated as sustained release Gastro retentive floating tablets. Methods: Floating Tablets of Bisoprolol Fumarate were prepared by using polymers such as Polyox N 12 K and Carbapol 940 P. Formulations were prepared by using direct compression method and evaluated for various parameters like Hradness, thickness, weight variations, Floating lag time Total floating time,% drug release and Stability Study etc. Results: FTIR spectroscopic study indicates no drug-excipients interaction in the prepared formulations. Hardness or crushing strength of the tablets of all the formulation was found between 5.8 and 6.5 kg/cm2. Floating lag time of all batches is in range of 1.18±2.0 to 2.43±1.6 (minutes). All other parameters of all batches are within an acceptable range. The polymer Carbopol 940 P had the significant negative effect of on the floating lag times. The In vitro dissolution profiles of optimized A3 Floating formulation of Bisoprolol Fumarate were found to sustain drug release 99.25 % up to 12 h with floating lag time of 1.45 min; Designed formulation was stable after Stability study. Optimization study was carried out by using 32 factorial designs to fabricate formulations. Conclusion: It can be conclude that reproducible results of various parameters in this developed formulation can easily scale up. Furthermore designed formulation will be very effective for controlling blood pressure.

Sign in / Sign up

Export Citation Format

Share Document