IN VITRO EVALUATION OF LECTINIZED CISPLATIN BEARING LIPOSOMES SYSTEM

2020 ◽  
pp. 60-64
Author(s):  
RAHUL TIWARI ◽  
KALIYAPERUMAL VISWANATHAN ◽  
SURESH PRASAD VYAS ◽  
VANDANA SONI
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Wheat Germ Agglutinin ◽  
Wheat Germ ◽  
Entrapment Efficiency ◽  
Cancer Drug ◽  
Drug Molecules ◽  
Transmission Electron ◽  
Surface Modified

Objective: The purpose of this study was to evaluate the extent and mechanism anti-cancer drug-loaded liposomes using wheat germ agglutinin as a guiding molecule. Methods: For the drug-loaded liposome synthesis, the thin film hydration method was used and the drug cisplatin was loaded during the synthesis and followed by the surface modification using wheat germ agglutinin (WGA) lectin. The developed system was confirmed based on transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size (PS) analyzer, polydispersity index and Zeta Potential analyzer. Results: The results showed the surface modified by liposomes had the particle size 200±5 nm. The wheat germ agglutinin coated on the surface to liposome led to a reduction in zeta potential and drug entrapment efficiency while particle size increased. Plain liposomes containing cisplatin had less effect than WGA modified liposome on MCF-7 cell lines. Conclusion: The MTT studies indicated that the drug molecules were initially get delivered to the inside the cell. This formulation offered new simple approach and effectively kill the cells via targeting the nucleus.

scholarly journals FORMULATION, OPTIMIZATION, AND IN VITRO EVALUATION OF POLYMERIC NANOSUSPENSION OF FLURBIPROFEN

2019 ◽  
pp. 183-191
Author(s):  
PANKAJ JADHAV ◽  
ADHIKRAO YADAV
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Transmission Electron

Objective: At present, more than 40% of drugs are poorly water-soluble that leads to reduced bioavailability. The objective of the present investigation was to overcome the issue of poor aqueous solubility of drug; therefore, stable flurbiprofen (FBF) nanosuspensions were developed by nanoprecipitation method. Materials and Methods: Based on particle size, zeta potential, and entrapment efficiency, the polymeric system of hydroxypropyl methylcellulose E15 and poloxamer 188 was used effectively. The prepared formulations were evaluated for Fourier transform infrared spectroscopy, transmission electron microscopy, differential scanning calorimetry, powder X-ray diffraction, saturation solubility, entrapment efficiency, particle size, zeta potential, dissolution profile, and stability. Results: The resultant FBF nanosuspensions depicted particles in size range of 200–400 nm and were physically stable. After nanonization, the crystallinity of FBF was slightly reduced in the presence of excipients. The aqueous solubility and dissolution rate of all FBF nanosuspensions were significantly increased as compared with FBF powder. Conclusion: This investigation demonstrated that nanoprecipitation is a promising method to develop stable polymeric nanosuspension of FBF with significant increase in its aqueous solubility.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Development of NIPAAm-PEG acrylate polymeric nanoparticles for co-delivery of paclitaxel with ellagic acid for the treatment of breast cancer

2019 ◽  
Vol 39 (3) ◽  
pp. 271-278 ◽  
Author(s):  
Suruchi Suri ◽  
Mohd. Aamir Mirza ◽  
Md. Khalid Anwer ◽  
Abdullah S. Alshetaili ◽  
Saad M. Alshahrani ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Ellagic Acid ◽  
Oral Delivery ◽  
Polymeric Nanoparticles ◽  
Entrapment Efficiency ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Abstract The aim of the current study was to develop a dual-loaded core shell nanoparticles encapsulating paclitaxel (PTX) and ellagic acid (EA) by membrane dialysis method. Based on particle size, polydispersity index (PDI), and entrapment efficiency, the dual drug-loaded nanoparticles (F2) was optimized. The optimized nanoparticles (F2) showed a particle size of 140±2 nm and a PDI of 0.23±3. The size and the morphology were confirmed by transmission electron microscopy (TEM) and found agreement with the results of dynamic light scattering. The entrapment efficiencies of total drug (PTX and EA), PTX, and EA in the nanoparticles (F2) were measured as 80%, 62.3%, and 37.7%, respectively. The in vitro release profile showed a controlled release pattern for 48 h. A higher cytotoxicity was observed with nanoparticles (F2) in comparison to free PTX. The results revealed that co-delivery of PTX and EA could be used for its oral delivery for the effective treatment of breast cancer.

scholarly journals Formulation and Characterization of Felodipine as an Oral Nanoemulsions

2021 ◽  
Vol 30 (1) ◽  
pp. 209-217
Author(s):  
Sumaya B. Hamed ◽  
Shaimaa N. Abd Alhammid
Keyword(s):  
Particle Size ◽  
Oleic Acid ◽  
Zeta Potential ◽  
Water Solubility ◽  
Tween 80 ◽  
Aqueous Solubility ◽  
Compatibility Study ◽  
Drug Content ◽  
Drug Molecules

            Felodipine is a calcium-channel blocker with low aqueous solubility and bioavailability. Lipid dosage forms are attractive delivery systems for such hydrophobic drug molecules. Nanoemulsion (NE) is one of the popular methods that has been used to solve the dispersibility problems of many drugs. Felodipine was formulated as a NE utilizing oleic acid as an oil phase, tween 80 and tween 60 as surfactants and ethanol as a co-surfactant. Eight formulas were prepared, and different tests were performed to ensure the stability of the NEs, such as particle size, polydispersity index, zeta potential, dilution test, drug content, viscosity and in-vitro drug release. Results of characterization showed that felodipine nanoemulsion (F3) with (oleic acid 10%) ,(Smix 60% of tween80 :ethanol in a ratio of 3:1), (DDW 30%) was selected as the best formula, since it has a particle size of (17.01)nm, low PDI (0.392), zeta potential (-22.34mV), good dilution without drug precipitation , higher percent of drug content (99.098%) with  acceptable viscosity , and complete release of the drug after (45 min.) with significantly higher (P<0.05)   dissolution  rate in comparison with the pure drug powder. The selected formula (F3) subjected to further investigations as drug and excipient compatibility study by Fourier transform infrared spectroscopy (FTIR) The outcomes of the (FTIR) explain that the distinctive peaks for felodipine were not affected by other components and displayed the same functional group's band with very slight shifting. This indicates that there was no interaction between felodipine and other NE components. Therefore, these excipients were found to be compatible with felodipine. In conclusion, the NE was found to be an efficient method to enhance the dispersibility and permeatioins of drugs that have poor water solubility (lipophilic drugs).

scholarly journals FORMULATION, DEVELOPMENT AND CHARACTERISATION OF NIMODIPINE LOADED SOLID LIPID NANOPARTICLES

2020 ◽  
pp. 265-271
Author(s):  
REMYA P. N. ◽  
DAMODHARAN N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Stearic Acid ◽  
Palmitic Acid ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: The aim of the present study is to develop solid lipid nanoparticles (SLNs) of Nimodipine using hot homogenization followed by ultrasonication technique and to improve the dissolution characteristics of the drug. Methods: The Nimodipine-loaded SLN was prepared using palmitic acid and stearic acid as a lipid matrix and Tween-80 as an emulsifier by a hot homogenization and ultra-sonication method. The physicochemical characteristics of SLN were investigated for entrapment efficiency, zeta potential, in vitro drug release, particle size analysis, Fourier transform infrared studies, scanning electron microscopy, and stability studies. Results: The mean particle size, PDI, Zeta potential and entrapment efficiency of optimized Nimodipine SLN formulation of stearic acid was found to be 119.54 nm, 0.165,-17.60mV, 85% and for palmitic acid was found to be 132.54 nm, 0.155,-17.0mV, 81% respectively. In vitro drug release studies indicated that after an initial burst release, SLN could provide prolonged release of Nimodipine. The selected SLNs have shown good stability for a period of 180 d. Conclusion: SLN formulations showed the best results in EE as well as in vitro drug release and therefore, these results indicate that SLN might be a promising delivery system to enhance the release of Nimodipine.

scholarly journals Design, Development and Evaluation Of Anti-Hypertensive Drug Solid Lipid Nano Particles

2021 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Wide Range

Recently, solid lipid Nano-particles have received much attention by the researchers owing to its biodegradability, biocompatibility and the ability to deliver a wide range of drugs. The aim of the present study was to design Diltiazem solid lipid Nano-particles and to evaluate them. Diltiazem solid lipid Nano-particles were prepared by hot homogenization technique using different lipids (Tristearin, GMS and Comprital), soy lecithin as stabilizers and tween 80, Poloxamer as surfactants. The Nano-particles were evaluated for particle size & PDI, zeta potential, entrapment efficiency and in vitro drug release. The particle size ranged from 49.7 to 523.7 nm. PDI of all formulations were good within the range of 0.189 to 0.427. The zeta potential ranged from -10.5 to -29.6 Mv, Entrapment efficiency of all formulations were observed was in the range of 78.68 to 95.23 %. The cumulative percentage release of Diltiazem from different Diltiazem Nano-particles varied from 53.36 to 88.74% depending upon the drug lipid ratio and the type of lipid used. The average percentage of drug released from different SLNs after 24 hours showed in the following order: F9 (53.35%) < F6 (56.75%) < F4 (61.74%) < F7 (63.8%) < F5(67.77%) < F8(69.04%) < F3(75.31%) < F1(79.36%) <F2 (88.74%) respectively. The release kinetic studies showed that the release was first order diffusion controlled and the n values obtained from the Korsmeyer-Peppa’s model indicated the release mechanism was Quasi-Fickian type (n-value of 0.47). Keywords: Diltiazem, solid lipid Nano-particles, FTIR, in vitro drug release.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

scholarly journals BENAZEPRIL HYDROCHLORIDE LOADED NIOSOMAL FORMULATION FOR ORAL DELIVERY: FORMULATION AND CHARACTERIZATION

2018 ◽  
Vol 10 (5) ◽  
pp. 66
Author(s):  
Ameerah A. Radhi
Keyword(s):  
Zeta Potential ◽  
Oral Delivery ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Potential Range ◽  
Transmission Electron ◽  
Study Results ◽  
Span 60 ◽  
A Charge

Objective: The objective of the present study was to formulate niosomal formulations of benazepril hydrochloride in an attempt to overcome the hurdles associated with itʼs poor oral absorption.Methods: Nine formulations were prepared with various ratios of sorbitan monostearate (span 60), sorbitan monopalmitate (span 40) and polyoxyethylene 2 stearyl ether (brij 72) as non-ionic surfactants, cholesterol as a stabilizing agent and soya lecithin as a charge imparting agent. Then, they were characterized for vesicle size, polydispersity (PDI), entrapment efficiency (EE %), release profile, zeta (ζ) potential and transmission electron microscopy (TEM).Results: Niosomal formulations exhibited an efficient entrapment range between (80.4-97.8) percent, vesicles size analyses revealed the formation of homogenously dispersed vesicles having a size range of (3.9±1.7-8.72±4.4) micrometers. The in vitro release studies revealed that all formulations displayed sustained release in comparison with the pure drug. Formulations prepared with span 60 and span 40 possessed adequate stability according to zeta potential analysis, whereas brij 72 failed the test and possessed inadequate zeta potential range. TEM images of the optimized formulations (F7 and F8) have confirmed the formation of vesicles with spherical shapes.Conclusion: Based on the study results, niosomal formulations seem to be attractive alternatives to conventional delivery for benazepril hydrochloride.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF PIPER RETROFRACTUM EXTRACT LOADED MUCOADHESIVE NANOSTRUCTURED LIPID CARRIERS FOR TOPICAL ORAL DRUG DELIVERY

2017 ◽  
Vol 9 (9) ◽  
pp. 79
Author(s):  
Kavee Srichaivatana ◽  
Anan Ounaroon ◽  
Waree Tiyaboonchai
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
Oral Cavity ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carriers ◽  
Oral Drug ◽  
Drug Entrapment Efficiency ◽  
Piper Retrofractum

Objective: To develop and characterize Piper retrofractum extract loaded nanostructured lipid carriers (PRE loaded NLCs) for topical oral cavity administration to enhance bioavailability and stability of piperine.Methods: PRE loaded NLCs were prepared with a hot high-pressure homogenization technique followed by coating the particle surface with mucoadhesive polymers; polyethene glycol 400 (PEG) and polyvinyl alcohol (PVA). The physicochemical properties in terms of particle size, polydispersity index, zeta potential, drug entrapment efficiency, in vitro drug release profile and antimicrobial activities were examined. In vitro, mucoadhesion studies were assessed by the wash-off test. The physicochemical stabilities of mouth spray containing PRE loaded NLCs were investigated by kept at room temperature and 4 °C for 6 mo.Results: The PRE loaded NLCs showed spherical shape with a mean particle size of ~100-120 nm and zeta potential of ~-24 mV. Up to 90% drug entrapment efficiency was achieved. PEG-NLCs and PVA-NLCs showed a strong interaction with porcine buccal mucosa than uncoated-NLCs. All PRE loaded NLCs formulations revealed fast release characteristics and effective against Streptococcus mutans and S. sanguinis. The mouth spray containing PRE loaded NLCs showed good physical stability without particle aggregation. In addition, the chemical stability of piperine in NLCs was significantly improved during storage at both storage conditions compared to its solution form.Conclusion: The developed PRE loaded polymer coated-NLCs showed high potential to use as a local drug delivery system for reducing the bacterial growth in the oral cavity.

scholarly journals OPTIMIZATION AND CHARACTERIZATION OF DOXORUBICIN LOADED SOLID LIPID NANOSUSPENSION FOR NOSE TO BRAIN DELIVERY USING DESIGN EXPERT SOFTWARE

2021 ◽  
pp. 45-57
Author(s):  
VIRAG A. SHAH ◽  
JAYVADAN K. PATEL
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
High Speed ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Brain Targeting ◽  
Solid Lipid ◽  
Stirring Time

Objective: The goal of the current study was to investigate the possible use of solid lipid nanosuspension (SLNs) as a drug delivery method to boost doxorubicin (DOX) brain-targeting performance after intranasal (i. n.) administration.  Methods: 33 factorial design was applied for optimization by using lipid concentration, surfactant concentration, and High-speed homogenizer (HSH) stirring time as dependent variables, and their effect was observed on particles size, Polydispersity index (PDI), and entrapment efficiency.  Results: With the composition of Compritol® 888 ATO (4.6 % w/v), tween 80 (1.9 % w/v), and HSH stirring time, the optimized formula DOX-SLNs prepared (10 min). Particle size, PDI, zeta potential, entrapment efficiency, percent in vitro release were found to be 167.47±6.09 nm, 0.23±0.02, 24.1 mV, 75.3±2.79, and 89.35±3.27 percent in 24 h, respectively, for optimized formulation (V-O). No major changes in particle size, zeta potential, and entrapping efficiency were found in the stability studies at 4±2 °C (refrigerator) and 25±2 °C/60±5% RH up to 3 mo.  Conclusion: Following the non-invasive nose-to-brain drug delivery, which is a promising therapeutic strategy, the positive findings confirmed the current optimized DOX-loaded SLNs formulation.

Sign in / Sign up

Export Citation Format

Share Document