scholarly journals Suggested Methodology of Molar Density along X-Ray Diffraction Spectrum for Nano-composite Mixture with Standard Formulae

Author(s):  
Rohit Madhukar Nikam
2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Omer Bin Sohail ◽  
P. A. Sreekumar ◽  
S. K. De ◽  
Masihullah Jabarullah Khan ◽  
Abbas Hakeem ◽  
...  

Ethylene polymerization was done to form polyethylene nano-composite with nanoaluminum nitride using zirconocene catalysts. Results show that the catalytic activity is maximum at a filler loading of 15 mg nanoaluminum nitride. Differential scanning calorimeter (DSC) and X-ray diffraction (XRD) results show that percentage crystallinity was also marginally higher at this amount of filler. Thermal behavior of polyethylene nanocomposites (0, 15, 30, and 45) mg was studied by DSC and thermal gravimetric analyzer (TGA). Morphology of the component with 15 mg aluminium nitride is more fibrous as compared to 0 mg aluminium nitride and higher filler loading as shown by SEM images. In order to understand combustibility behavior, tests were performed on microcalorimeter. Its results showed decrease in combustibility in polyethylene nanocomposites as the filler loading increases.


1980 ◽  
Vol 43 (329) ◽  
pp. 659-663 ◽  
Author(s):  
M. J. Wort ◽  
M. P. Jones

SynopsisIT was not until 1966 that pseudorutile was first defined. Earlier, its X-ray diffraction spectrum had been confused with that of futile and, to a lesser degree, with those of hematite and ilmenite. Subsequent work has shown that pseudorutile has a world-wide distribution in detrital ilmenite-bearing heavy mineral deposits. The present work has confirmed its magnetic susceptibility and density. In addition pseudorutile is shown to be a magnetic spin glass with a peak susceptibility at 23 °K.Altered ilmenites, in which pseudorutile occurs as a secondary alteration product, display a range of chemical composition and magnetic susceptibility. The most highly magnetic fractions are not necessarily those containing the least-altered ilmenite, and in material from Capel, Western Australia, the most highly magnetic fractions were those containing grains of ferrimagnetic ferrian ilmenite.Quantitative X-ray diffraction has shown that West Australian altered ilmenite contains significant amounts of amorphous ilmenite, pseudorutile, and rutile. The magnetic susceptibility of paramagnetic fractions of altered ilmenite from Capel, Western Australia, can be calculated from normative compositions based on chemical analyses.


2007 ◽  
Vol 280-283 ◽  
pp. 155-158 ◽  
Author(s):  
Chun Lin Miao ◽  
Mao Wang ◽  
Zhen Xing Yue ◽  
Ji Zhou ◽  
Xue Min Cui

This paper presents the shrinkage behavior, phase transformation and interfacial character of the hexagonal ferrite/silver electrode composite. The shrinkage analysis shows apparent sintering mismatch between hexagonal ferrite ceramic and silver electrode material and improvement of the co-fired characteristics was obtained by adding appropriate amount of sintering additive. Scanning electron microscopy observations indicate that silver grains distribute uniformly in the composite. Drawn from the back-scattered (BS) electron image, no silver dispersed into the ferrite grains and there’re no obvious chemical reactions between Co2Z hexagonal ferrite and silver, which can be confirmed by X-ray diffraction spectrum. Silver induction exerts remarkable effect on the electronic properties of the composite and could increase the dielectric constant and dielectric loss to a certain extent.


2017 ◽  
Vol 67 (5) ◽  
pp. 510 ◽  
Author(s):  
Han Gao ◽  
Wei Jiang ◽  
Jie Liu ◽  
Gazi Hao ◽  
Lei Xiao ◽  
...  

<p>An energetic co-crystal consisting of the most promising military explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and the most well-known oxidant applied in propellants ammonium perchlorate has been prepared with a simple solvent evaporation method. Scanning electron microscopy revealed that the morphology of co-crystal differs greatly from each component. The X-ray diffraction spectrum, FTIR, Raman spectra, and differential scanning calorimetry characterisation further prove the formation of the co-crystal. The result of determination of hygroscopic rate indicated the hygroscopicity was effectively reduced. At last, the crystallisation mechanism has been discussed.</p>


2012 ◽  
Vol 512-515 ◽  
pp. 1574-1578
Author(s):  
Wei Wei He ◽  
Jun Sang ◽  
Yang Li ◽  
Hong Xiao Zhao ◽  
Hui Min Jia

In this paper, a facile hydrothermal method has been developed for preparation of micro/nano structures of ZnS microspheres and ZnO microrods. The morphologies and crystalline structures were confirmed by scanning electron microscopy (SEM) and X-ray diffraction spectrum (XRD). In the co-existence of cysteine and hexamethylenetetramine (HMTA), we observed the competitive growth of ZnS and ZnO microstructures, and found that higher temperature was benefited for the formation of ZnS structures. This method may be applied for synthesis of other metal compound micro-nano structures with other metal ions. ZnS and ZnO semiconductor nanostructures as often-used photo-catalyst, we also compared their catalytical activity toward to the photo-degradation of methylene blue.


2012 ◽  
Vol 581-582 ◽  
pp. 396-400 ◽  
Author(s):  
Hui Ping Liu

The influences of pH values and aluminum precursors of “glucose-water-aluminum salt” reaction system on the hydrothermal synthesis of mesoporous Al2O3 were investigated. With the aid of scanning electron microscopy (SEM), electron diffraction spectrum (EDS) and X-ray diffraction (XRD) characterizations, we found that, under hydrothermal treatment at 180 °C for 20 h, aluminum nitrate (Al(NO3)3) could be used as the precursor to synthesize the spherical flower-like Al2O3 by using the synthesis solutions with different pH values in a certain scope; using aluminum chloride (AlCl3) as precursor, we can only get a small amount of Al2O3 composed of micro-spheres and sheets; while adopting aluminum sulfate (Al2(SO4)3) as precursor, a small amount of cubic-shape aluminum sulfate crystal can be obtained.


2012 ◽  
Vol 550-553 ◽  
pp. 192-195
Author(s):  
Dao Xin Wu ◽  
Hai Xia Tong ◽  
Chang Bin Xia

Vanadium doped rutile titania was prepared by low temperature hydrolysis using Tetrabutyl titanate as raw material. Powers were characterized by X-ray diffraction spectrum (XRD)、diffuse reflection spectra(DRS)、fluorescence spectra (FS). At 1073K, Doped concentration have been in a certain range, Vanadiumcould be doped into the lattice of rutile TiO2in the way of replacement, which would cause no change in rutile TiO2crystalline state with sunlight as the light source, pH=6.0, catalyst concentration was 1.0g.L-1, concentration of methyl orange was 5.0mg.L-1. It has been shown that Vanadium doped TiO2powders(1.0%,1073K) has been the most photodegradation efficiency, and the degradation efficiency was 97.2% after 6h.


2017 ◽  
Vol 898 ◽  
pp. 1776-1782
Author(s):  
Yu Lin Wu ◽  
Yi Su ◽  
Yao Liu ◽  
Yong Wang ◽  
Lei Zhang ◽  
...  

The corresponding relationship among KDP solution viscosity, concentration and temperature was researched respectively, to explore the empirical formula of the viscosity of KDP solution. The experimental results showed that the viscosity increased with the increase of ionic strength and reciprocal of temperature. Viscosity had exponent relation to ionic strength and reciprocal of temperature, fitting in well with the empirical formula: See formula in paper. The X-ray diffraction analysis showed that with the increasing amount of KDP, a new peak emerging in the diffraction spectrum accorded with molecular structure of KDP crystals, and some peaks which accorded with the structural features of water molecules gradually disappeared. It showed that with the increase of the amount of KDP, the internal structure of KDP solution had changed.


2013 ◽  
Vol 678 ◽  
pp. 248-252
Author(s):  
K. Kavi Rasu ◽  
Dhandapani Vishnushankar ◽  
V. Veeravazhuthi

Bismuth sulfide (Bi2S3) and Polyvinyl pyrrolidone (PVP) encapsulated Bi2S3 Nanoparticles are synthesized from aqueous solutions at room temperature. Synthesized samples are subjected to UV-Visible Spectroscopy, X-Ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive Analysis of X-ray (EDAX), Transmission Electron Microscopy (TEM) and FT-IR studies and their results are compared. X-ray diffraction spectrum reveals the crystalline nature of the synthesized samples. Grain size value of PVP/ Bi2S3 nanoparticles show a decrease when compared to Bi2S3 nanoparticles and this ensures the good encapsulant effect of PVP on Bi2S3 nanoparticles. SEM images show that all the particles in the synthesized sample are nearly equal in size. From the TEM image we conclude that the particle size lies between 30nm to 70nm. Finally the samples are subjected to EDAX studies for determining their composition.


2019 ◽  
Vol 21 (7) ◽  
pp. 3734-3741 ◽  
Author(s):  
Hailong Li ◽  
Markus Bier ◽  
Julian Mars ◽  
Henning Weiss ◽  
Ann-Christin Dippel ◽  
...  

We present a quantitative description of ice premelting in permafrost model systems. Experimental data on the interfacial premelting in ice/clay nano composites was obtained by high energy X-ray diffraction.


Sign in / Sign up

Export Citation Format

Share Document