Electrical Power Generation through Speed Breaker

2021 ◽  
Vol 9 (9) ◽  
pp. 955-959
Author(s):  
Raunak Raj
Keyword(s):  
Power Generation ◽  
Kinetic Energy ◽  
Human Life ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Power Generating Unit ◽  
Moving Vehicles ◽  
Future Demands

Abstract: In the present situation power becomes basic need for human life. Energy is responsible for major developments of any country’s economy. Conventional energy sources generate most of the energy of today’s world. But the population is increasing day by day and the conventional energy sources are diminishing. Moreover, these conventional energy sources are polluting and responsible for global warming. So, nonconventional sources are needed to be developed for power generation which are clean, environment friendly and sustainable. In this research we propose a renewable non-conventional energy source based on speed breaker mechanism. Our project is to enlighten the streets utilizing the jerking pressure which is wasted during the vehicles passes over speed breaker in roadside. We can tap the energy generated by moving vehicles and produce power by using the speed breaker as power generating unit. The kinetic energy of the moving vehicles can be converted into mechanical energy through rack and pinion mechanism and this mechanical energy will be converted to electrical energy using generator which will be used for lighting the street lights. Therefore, by using this mechanism we can save lot of energy which can fulfill our future demands. Keywords: kinetic energy, speed breaker, rack & pinion, generator, non-conventional energy, street light.

A Review of Two Patents Relating to Novel Energy Harvesting Techniques to Provide Electrical Power On-Board Gun-Fired Projectiles

2010 ◽  
Author(s):  
Jahangir Rastegar ◽  
Richard Murray
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Harsh Environment ◽  
Logical Framework ◽  
Power Sources ◽  
Piezoelectric Elements ◽  
Harvesting Techniques

This is a review of two patents relating to electrical power generation on-board gun-fired munitions. The devices harvest mechanical energy from the motion of the projectile (e.g. the axial firing acceleration), and then convert the energy from mechanical to electrical using novel mechanisms and materials such as piezoelectric elements. The devices are particularly important for several reasons. Firstly, the devices are inherently safe because the root source of the electrical energy is the motion of the projectile; therefore no electrical energy can be produced until after the projectile is fired. Second, the devices have a much longer shelf-life than competing electrical power sources such as batteries. Finally, the devices are simple, rugged, and reliable making them ideal for the harsh environment on-board gun-fired projectiles. In addition to presenting the general approach, the logical framework of the patented embodiments is presented, especially with respect to the types of motion used for harvesting and the challenges presented by the varied magnitudes of those motions in different weapon platforms.

scholarly journals Pengujian Alat Modifikasi Alternator Mobil Menjadi Listrik Rumah

2019 ◽  
Vol 11 (1) ◽  
pp. 28-32
Author(s):  
Naufal Noverdi ◽  
Eka Sunitra ◽  
Maimuzar Maimuzar
Keyword(s):  
Coming Out ◽  
Alternative Energy ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Optimum Conditions ◽  
Fossil Energy ◽  
Final Project ◽  
Alternative Energy Sources

This paper discusses the use of alternator cars into home electricity. This paper aims to overcome the energy crisis by reducing dependence on fossil energy sources by utilizing alternative energy sources or by developing technology in the form of alternator modifications, and also from this paper we can find out the optimum conditions of rotation and generating electricity. The workings of this alternator modification tool so as to produce electrical power that is using a motor as a drive connected to the alternator produced mechanical energy converted into electrical energy and from this alternator a voltage of 12 volts comes out and goes into travo to increase the voltage to 220 Volts. From the results of the testing of this final project, the effect of rotation on the production of electrical energy coming out on this alternator modification tool is if the rotation produced is high then the power output is also good and if the rotation is slowed the power coming out will also be small. The optimum condition of this test is at 1600rpm. Key words: keywords are written in 5 words which should be a subset of paper titles, written using lowercase letters except for abbreviations, and separated by comma punctuation for between words.

scholarly journals Power Generation on Highway by Harnessing Wind Power

2019 ◽  
Vol 8 (12S) ◽  
pp. 330-331
Keyword(s):  
Power Generation ◽  
Wind Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Generation System ◽  
System A ◽  
Ac Power ◽  
Moving Vehicles ◽  
Power Generation System ◽  
Electrical Loads

This paper is focused on the wind power generated by harnessing the wind power generated by moving vehicles on the roadway. The wind power and solar power is the future of power generation system. The wind power have the least carbon footprint as compare to other form of energy sources. In this paper a system for harnessing roadside wind power is discussed in this system a special type of wind turbine is used for harnessing wind generated by moving vehicles and converted into electrical energy by a generator. The electrical energy is stored in the batteries installed in system and further used when require by converting DC into AC by an inverter. The AC power is used for supplying power to houses, street light and many other electrical loads.

Electrical Power Generation: Renewables—Solar and Wind

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Energy Source ◽  
Power Generation ◽  
Renewable Energy Source ◽  
Electrical Power ◽  
Electrical Energy ◽  
The United States ◽  
Energy Sources ◽  
Simple Test ◽  
Electrical Demand ◽  
Power Densities

Solar and wind power have low power densities. Large areas will be required to generate the electrical energy that we are using right now. These energy sources are intermittent, although sunshine is reasonably predictable in desert climates. Even in these ideal locations, fixed rooftop PV can only be used to meet a relatively small proportion of total electrical demand. Solar thermal with molten salt storage has a higher efficiency, and can better match electrical demands in these places. For wind turbines to generate their advertised or rated power, winds have to be blowing at about 12 m/sec (20 kt or 24 mph). In the United States, except in mountain passes and the Texas panhandle, this does not appear to happen very often. A simple test of whether a given renewable energy source is practical is to check whether it can meet the electrical demands of a single house.

Rancang Bangun Mekanisme Fess Sebagai Alat Pembanding Pengaruh Geometri Flywheel Terhadap Energi Kinetik Yang Dihasilkan

2019 ◽  
Vol 8 (02) ◽  
pp. 1-6
Author(s):  
Adhe Anggry ◽  
Yuli Dharta ◽  
Andri Wiguna ◽  
Armada Armada ◽  
Ririn Martasari
Keyword(s):  
Free Energy ◽  
Energy Storage ◽  
Kinetic Energy ◽  
Specific Energy ◽  
Mechanical Energy ◽  
Storage System ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy Storage System ◽  
Tidal Power

Recent days, more and more people are becoming interested in "free-energy". "Free-energy" means the energy sources used freely without to pay. The sources of "free-energy" are sunlight, rainfall, wind energy, wave power, and tidal power. There are other sources of power such as gravity, electrical charge in the atmosphere and ionosphere, and a mass. FESS (Flywheel Energy Storage System) is an attempt to store kinetic energy generated from the rotation flywheel in which the electrical power output from the generator as an input to the motor. Mass flywheel greatly affects the amount of power generated by a generator which will serve as a flywheel device or distributors of energy while at the induction generator to eventually convert mechanical energy into electrical energy and vice versa. In this system design becomes very important for the flywheel can store the kinetic energy. This research aims to design and build mechanisms as a means of comparison FESS flywheel effect of the geometry of the kinetic energy generated. The research method is done by making three different geometric design flywheels, and then analyzed with the help of FESS. From the experimental results, flywheel 1 with a ringtype web-concave generate kinetic energy of 312.30 J and specific energy of 31.23 J / kg, at the flywheel 2 which is type-straight arm kinetic energy gained by 316.73 J and energy specific of 31.67 J / kg and flywheel 3 with a ring-type web-straight kinetic energy obtained by 284.997 J and specific energy of 28.49 J / kg. From the research data we can conclude that each design geometry flywheel has a different contribution to the performance of energy storage.

DEVELOPMENT OF CONSTRUCTION OF THREE-INPUT GENERATING INSTALLATIONS ON BASED OF RENEWABLE ENERGY SOURCES

2018 ◽  
Author(s):  
Я.М. КАШИН ◽  
Л.Е. КОПЕЛЕВИЧ ◽  
А.В. САМОРОДОВ ◽  
Ч. ПЭН
Keyword(s):  
Renewable Energy ◽  
Kinetic Energy ◽  
Total Energy ◽  
Thermal Energy ◽  
Output Voltage ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Energy Sources ◽  
Voltage Regulator ◽  
The Sun

Описаны конструктивные особенности трехвходовой аксиальной генераторной установки (ТАГУ), преобразующей кинетическую энергию ветра и световую энергию солнца и суммирующей механическую, световую и тепловую энергию с одновременным преобразованием полученной суммарной энергии в электрическую. Показаны преимущества ТАГУ перед двухвходовыми генераторными установками. Дополнительное включение стабилизатора напряжения в схему ТАГУ позволило расширить область применения стабилизированной трехвходовой аксиальной генераторной установки за счет стабилизации ее выходного напряжения. The design features of the three-input axial generating installation (TAGI), which converts the kinetic energy of wind and light energy of the sun and sums the mechanical, light and thermal energy with the simultaneous conversion of the total energy into electrical energy, are described. The benefits of TAGI in front of the two-input generating installation shown. The additional introduction of a voltage regulator into the TAGI scheme allowed to expand the scope of the stabilized three-input axial generating installation by stabilizing its output voltage.

scholarly journals Power Generation In Nigeria: The Past, Present And The Future

2020 ◽  
pp. 1-8
Author(s):  
Adeoye Samuel ◽  
◽  
Oladimeji TT ◽  
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Power Imbalance ◽  
Power Demand ◽  
Electrical Power System ◽  
Hydro Power ◽  
The Future

The goal of power sector in Nigeria is to efficiently and reliably transmit electrical power to all parts of the country which are made up of thirty-six states of the federation and the federal capital territory. The constituents of electrical power system are the generation, transmission, distribution and the utilization of electrical energy. There is gross power imbalance between the generation and the required power demand which has culminated into a defective economy in the last three decades. This paper therefore examines the power imbalance between the generation and power demand by the consumers and therefore stresses the need to harness the opportunity of renewable energy generation close to the gap between the power generation and power demand. This will help in transmitting and distributing efficient, effective, reliable power to consumers and improve both human and capital development. The availability of renewable energy sources such as sun, wind and small hydro power will be explored for the future of power generation in the country to fill in the gap between power generation and demand in Nigeria

scholarly journals The Global Survey of the Electrical Energy Distribution System: A Review

2019 ◽  
Vol 9 (4) ◽  
pp. 2247 ◽  
Author(s):  
Archana Sudhakar Talhar ◽  
Sanjay B. Bodkhe
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Clean Energy ◽  
Central Intelligence Agency ◽  
Energy Sources ◽  
Power Sources ◽  
Energy Scenario ◽  
The World

This paper gives a review of energy scenario in India and other countries. Today’s demand of the world is to minimize greenhouse gas emissions, during the production of electricity. Henceforth over the world, the production of electrical power is changing by introducing abundantly available renewable energy sources like sun and wind. But, because of the intermittent nature of sustainable power sources, the electrical power network faces many problems, during the transmission and distribution of electricity. For resolving these issues, Electrical Energy Storage (EES) is acknowledged as supporting technology. This paper discusses about the world electrical energy scenario with top renowned developed countries in power generation and consumption. Contribution of traditional power sources changed after the introduction of renewable energy sources like sun and wind. Worldwide Agencies are formed like International Energy Agency (IEA), The Central Intelligence Agency, (CIS) etc. The main aim of these agencies is to provide reliable, affordable and clean energy. This paper will discuss about the regulatory authority and government policies/incentives taken by different countries.  At the end of this paper, author focuses on obstacles in implementation, development and benefits of renewable energy.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

scholarly journals Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
François M. Guillot ◽  
Haskell W. Beckham ◽  
Johannes Leisen
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Lead Zirconate ◽  
Ceramic Fibers ◽  
Power Sources ◽  
Electromechanical Performance ◽  
Alternative Power

In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.

Sign in / Sign up

Export Citation Format

Share Document