scholarly journals Aerodynamic Analysis of Novel Savonius Rotor

2021 ◽  
Vol 9 (11) ◽  
pp. 1055-1061
Author(s):  
Manthan N. Varia
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Urban Areas ◽  
Energy Crisis ◽  
Aerodynamic Analysis ◽  
Savonius Rotor ◽  
Blade Shape ◽  
Novel Design

Abstract: Wind is a renewable form of energy that holds vital solutions to energy crisis that will be faced in the possible future. Apart from the viable lift based turbines that we have been working on, research can be done on drag based turbines that can be installed in urban areas for short power requirements. The research aims at developing a novel design for Savonius type rotor which will help to improve the power producing characteristics of the turbine. CFD fluent analysis will help in analysis of the proposed blade shape. The results explain how the combination of elliptical profiled blade improves coefficient of power for Savonius type rotor. Keywords: Aerodynamics, Wind Energy, Savonius, VAWT, Wind Turbine

scholarly journals Wind Energy Potential at Badin and Pasni Costal Line of Pakistan

2017 ◽  
Vol 6 (2) ◽  
pp. 103 ◽  
Author(s):  
Ghulam Sarwar Kaloi ◽  
Jie Wang ◽  
Mazhar H Baloch ◽  
Sohaib Tahir
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Urban Areas ◽  
Interconnection Network ◽  
Wind Farms ◽  
Energy Sector ◽  
Energy Crisis ◽  
Energy Potential ◽  
The Past ◽  
Wind Energy Potential

Unfortunately, Pakistan is facing an acute energy crisis since the past decade due to the increasing population growth and is heavily dependent on imports of fossil fuels. The shortage of the electricity is 14-18 hours in rural areas and 8-10 hours in urban areas. This situation has been significantly affecting the residential, industrial and commercial sectors in the country. At this time, it is immense challenges for the government to keep the power supply provision continue in the future for the country. In this situation, it has been the increased research to explore renewable energy resources in the country to fulfill the deficit scenario in the state. The renewable energy sector has not penetrated in the energy mix, currently in the upcoming markets. This paper highlights the steps taken by the country in the past and is taking steps at the present time to get rid of from the existing energy crisis when most urban areas are suffering from power outages for 12 hours on regular basis. Until 2009, no single grid interconnected wind established, but now the circumstances are changing significantly and wind farms are contributing to the national grid is the reality now. The initiation of the three wind farms interconnection network and many others in the pipeline are going to be operational soon. The federal policy on wind energy system has recently changed. Surprisingly, the continuing schemes of the wind farm are getting slow. This paper reviews developments in the wind energy sector in the country and lists some suggestions that can contribute to improving the penetration of wind energy in the national energy sector.Keywords: Wind energy, evolution of wind resource, Wind sites of PakistanArticle History: Received Dec 16th 2016; Received in revised form May 15th 2017; Accepted June 18th 2017; Available onlineHow to Cite This Article: Kaloi,G.S., Wang, J., Baloch, M.H and Tahir, S. (2017) Wind Energy Potential at Badin and Pasni Costal Line Pakistan. Int. Journal of Renewable Energy Development, 6(2), 103-110.https://doi.org/10.14710/ijred.6.2.103-110

scholarly journals Monitoring and Modeling Roof-Level Wind Speed in a Changing City

Atmosphere ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 87
Author(s):  
Kathrin Baumann-Stanzer ◽  
Sirma Stenzel ◽  
Gabriele Rau ◽  
Martin Piringer ◽  
Felix Feichtinger ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Urban Areas ◽  
Dispersion Model ◽  
Flow Direction ◽  
Energy Yield ◽  
Wind Speeds ◽  
Small Wind Turbine ◽  
Roof Level

Results of an observational campaign and model study are presented demonstrating how the wind field at roof-level in the urban area of Vienna changed due to the construction of a new building nearby. The investigation was designed with a focus on the wind energy yield of a roof-mounted small wind turbine but the findings are also relevant for air dispersion applications. Wind speed profiles above roof top are simulated with the complex fluid dynamics (CFD) model MISKAM (Mikroskaliges Klima- und Ausbreitungsmodell, microscale climate and dispersion model). The comparison to mast measurements reveals that the model underestimates the wind speeds within the first few meters above the roof, but successfully reproduces wind conditions at 10 m above the roof top (corresponding to about 0.5 times the building height). Scenario simulations with different building configurations at the adjacent property result in an increase or decrease of wind speed above roof top depending on the flow direction at the upper boundary of the urban canopy layer (UCL). The maximum increase or decrease in wind speed caused by the alternations in building structure nearby is found to be in the order of 10%. For the energy yield of a roof-mounted small wind turbine at this site, wind speed changes of this magnitude are negligible due to the generally low prevailing wind speeds of about 3.5 m s−1. Nevertheless, wind speed changes of this order could be significant for wind energy yield in urban areas with higher mean wind speeds. This effect in any case needs to be considered in siting and conducting an urban meteorological monitoring network in order to ensure the homogeneity of observed time-series and may alter the emission and dispersion of pollutants or odor at roof level.

scholarly journals Computational Fluid Dynamics Study of a Modified Savonius Rotor Blade by Universal Consideration of Blade Shape Factor Concept

2021 ◽  
Vol 85 (1) ◽  
pp. 22-39
Author(s):  
Abdel-Fattah Mahrous
Keyword(s):  
Wind Turbine ◽  
Shape Factor ◽  
Rotor Blade ◽  
Design Feature ◽  
Vertical Axis ◽  
Shape Design ◽  
Vertical Axis Wind Turbine ◽  
Savonius Rotor ◽  
Turbine Performance ◽  
Blade Shape

This work aims to investigate computationally the performance of Savonius vertical axis wind turbine having a new design feature for its blade geometry. The proposed design is based on a universal consideration of blade shape factor concept for the Savonius rotor blade. A blade shape factor ranges from zero to infinity, or vice versa, is considered in a single blade of the modified Savonius rotor. This means that each point in the two-dimensional blade profile of the suggested blade design has a single value of blade shape factor that is defined based on the dimensions of conventional semi-circular blade. The computational results of the proposed blade shape design, having blade shape factor varying from infinity to zero, showed an improvement in turbine performance as compared to conventional blade shape design. Moreover, increasing the operating range of Savonius wind turbine is expected.

scholarly journals EFFECT OF SMART STRUCTURES ON AERODYNAMIC PERFORMANCE OF HORIZONTAL AXIS WIND TURBINE

2021 ◽  
Vol 5 (11) ◽  
Author(s):  
Hira Syed ◽  
Dr.Gulraiz Ahmed
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Stokes Equations ◽  
Smart Structures ◽  
Turbine Blades ◽  
Cost Effective ◽  
Aerodynamic Performance ◽  
Horizontal Axis Wind Turbine ◽  
Aerodynamic Analysis ◽  
Cord Length

In renewable energy the wind energy is the most significant source. The wind turbine suppresses the kinetic energy of the wind. Current research focuses on improving the aerodynamic performance of wind turbine blades through wind tunnel tests and theoretical studies. These exercises are time taking and require considerable laboratory resources. Similarly, simulation of wind turbines using CFD software (Computational Fluid Dynamics) provides cost-effective solutions for aerodynamic analysis of the blades. Due to the energy crisis in Pakistan, we need a solution to overcome the power shortage. Wind energy is an economical and affordable energy. In this study, two-dimensional airfoil S4310, was selected for the blade cross section. 2.1 m cord length from root and 0.67 m cord length from tip of the blade, aerodynamic analysis of this model was performed using ANSYS-FLUENT software. Using the turbulence model, the lift and drag coefficients were computed for wind-turbine blade at 0?-14? angles of attack (AOA). The CFD results accomplish by all together solving momentum ,continuity and the Navier-Stokes equations using a standard non-linear solver. The smart structures were also applied on the wing in which active twist was applied to the blade using twist angles from 0?-10? and similarly the lift to drag ratio were considered.

scholarly journals MODELING AND SIMULATION OF THE VERTICAL AXIS WIND TURBINE BY QBLADE SOFTWARE

2020 ◽  
Vol 2 (02) ◽  
pp. 181-188
Author(s):  
MERAD ◽  
Asmae BOUANANI ◽  
Mama BOUCHAOUR
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Clean Energy ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Simulation Software ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine

The use of wind energy has no harmful effects on the environment. This makes it a clean energy that is a real alternative to the problem of nuclear waste management and greenhouse gas emissions. Vertical axis wind turbines have prospective advantages in the field of domestic applications, because they have proven effectual in urban areas where wind flow conditions are intermittent, omnidirectional, unsteady and turbulent. The wind cannot ensure a regular energy supply without optimising the aerodynamics of the blades. This article presents a reminder about wind energy and wind turbines, especially the VAWT type wind turbines and also gives a presentation on the aerodynamic side of VAWT by studying the geometry and aerodynamic characteristics of the blade profiles with the acting forces and also the explanation of the DMS multiple flow tube model. This work also gives the different simulation methods to optimize the behaviour of the blades from the selected NACA profiles; the analysis first goes through the design of the blades by the design and simulation software Qblade which is used to calculate also the forces on the blade and the coefficients of lift, drag and fineness. At the end of this article we have the DMS simulation of the VAWT turbines, by determining the power coefficient and the power collected by the turbine to select the wind turbine adapted to a well characterized site.

SHAPING OF AN AUTONOMOUS POWER SYSTEM FOR GUARANTEED POWER SUPPLY WITH THE PREDOMINANCE WIND ENERGY

2018 ◽  
pp. 28-50
Author(s):  
S. G. Ignatiev ◽  
S. V. Kiseleva
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Demand ◽  
Diesel Generator ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Optimization of the autonomous wind-diesel plants composition and of their power for guaranteed energy supply, despite the long history of research, the diversity of approaches and methods, is an urgent problem. In this paper, a detailed analysis of the wind energy characteristics is proposed to shape an autonomous power system for a guaranteed power supply with predominance wind energy. The analysis was carried out on the basis of wind speed measurements in the south of the European part of Russia during 8 months at different heights with a discreteness of 10 minutes. As a result, we have obtained a sequence of average daily wind speeds and the sequences constructed by arbitrary variations in the distribution of average daily wind speeds in this interval. These sequences have been used to calculate energy balances in systems (wind turbines + diesel generator + consumer with constant and limited daily energy demand) and (wind turbines + diesel generator + consumer with constant and limited daily energy demand + energy storage). In order to maximize the use of wind energy, the wind turbine integrally for the period in question is assumed to produce the required amount of energy. For the generality of consideration, we have introduced the relative values of the required energy, relative energy produced by the wind turbine and the diesel generator and relative storage capacity by normalizing them to the swept area of the wind wheel. The paper shows the effect of the average wind speed over the period on the energy characteristics of the system (wind turbine + diesel generator + consumer). It was found that the wind turbine energy produced, wind turbine energy used by the consumer, fuel consumption, and fuel economy depend (close to cubic dependence) upon the specified average wind speed. It was found that, for the same system with a limited amount of required energy and high average wind speed over the period, the wind turbines with lower generator power and smaller wind wheel radius use wind energy more efficiently than the wind turbines with higher generator power and larger wind wheel radius at less average wind speed. For the system (wind turbine + diesel generator + energy storage + consumer) with increasing average speed for a given amount of energy required, which in general is covered by the energy production of wind turbines for the period, the maximum size capacity of the storage device decreases. With decreasing the energy storage capacity, the influence of the random nature of the change in wind speed decreases, and at some values of the relative capacity, it can be neglected.

Aerodynamic Shape Influence and Optimum Thickness Distribution Analysis of Perceptive Wind Turbine Blade

2018 ◽  
Vol 7 (3) ◽  
pp. 1
Author(s):  
J. V. Muruga Lal Jeyan ◽  
Akhila Rupesh ◽  
Jency Lal
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Thickness Distribution ◽  
Turbine Blades ◽  
Reduced Form ◽  
Load Factor ◽  
Strong Impact ◽  
Theory Approach ◽  
Distribution Analysis ◽  
Optimum Thickness

The aerodynamic module combines the three-dimensional nonlinear lifting surface theory approach, which provides the effective propagated incident velocity and angle of attack at the blade section separately, and a two-dimensional panel method for steady axisymmetric and non-symmetric flow has to be involved to obtain the 3D pressure and velocity distribution on the wind mill model blade. Wind mill and turbines have become an economically competitive form of efficiency and renewable work generation. In the abroad analytical studies, the wind turbine blades to be the target of technological improvements by the use of highly possible systematic , aerodynamic and design, material analysis, fabrication and testing. Wind energy is a peculiar form of reduced form of density source of power. To make wind power feasible, it is important to optimize the efficiency of converting wind energy into productivity source. Among the different aspects involved, rotor aerodynamics is a key determinant for achieving this goal. There is a tradeoff between thin airfoil and structural efficiency. Both of which have a strong impact on the cost of work generated. Hence the design and analysis process for optimum design requires determining the load factor, pressure and velocity impact and optimum thickness distribution by finding the effect of blade shape by varying thickness on the basis of both the aerodynamic output and the structural weight.

Performance enhancement of Savonius wind turbine by blade shape and twisted angle modifications

2021 ◽  
pp. 095765092098794
Author(s):  
Ahmed M Nagib Elmekawy ◽  
Hassan A Hassan Saeed ◽  
Sadek Z Kassab
Keyword(s):  
Wind Turbine ◽  
Performance Enhancement ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Vertical Axis ◽  
Cfd Simulations ◽  
Sliding Mesh ◽  
Blade Shape ◽  
Rotor Shape ◽  
Twisting Angle

Three-dimensional CFD simulations are carried out to study the increase of power generated from Savonius vertical axis wind turbines by modifying the blade shape and blade angel of twist. Twisting angle of the classical blade are varied and several proposed novel blade shapes are introduced to enhance the performance of the wind turbine. CFD simulations have been performed using sliding mesh technique of ANSYS software. Four turbulence models; realizable k -[Formula: see text], standard k - [Formula: see text], SST transition and SST k -[Formula: see text] are utilized in the simulations. The blade twisting angle has been modified for the proposed dimensions and wind speed. The introduced novel blade increased the power generated compared to the classical shapes. The two proposed novel blades achieved better power coefficients. One of the proposed models achieved an increase of 31% and the other one achieved 32.2% when compared to the classical rotor shape. The optimum twist angel for the two proposed models achieved 5.66% and 5.69% when compared with zero angle of twist.

Sign in / Sign up

Export Citation Format

Share Document