Aerodynamic Shape Influence and Optimum Thickness Distribution Analysis of Perceptive Wind Turbine Blade

2018 ◽  
Vol 7 (3) ◽  
pp. 1
Author(s):  
J. V. Muruga Lal Jeyan ◽  
Akhila Rupesh ◽  
Jency Lal
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Thickness Distribution ◽  
Turbine Blades ◽  
Reduced Form ◽  
Load Factor ◽  
Strong Impact ◽  
Theory Approach ◽  
Distribution Analysis ◽  
Optimum Thickness

The aerodynamic module combines the three-dimensional nonlinear lifting surface theory approach, which provides the effective propagated incident velocity and angle of attack at the blade section separately, and a two-dimensional panel method for steady axisymmetric and non-symmetric flow has to be involved to obtain the 3D pressure and velocity distribution on the wind mill model blade. Wind mill and turbines have become an economically competitive form of efficiency and renewable work generation. In the abroad analytical studies, the wind turbine blades to be the target of technological improvements by the use of highly possible systematic , aerodynamic and design, material analysis, fabrication and testing. Wind energy is a peculiar form of reduced form of density source of power. To make wind power feasible, it is important to optimize the efficiency of converting wind energy into productivity source. Among the different aspects involved, rotor aerodynamics is a key determinant for achieving this goal. There is a tradeoff between thin airfoil and structural efficiency. Both of which have a strong impact on the cost of work generated. Hence the design and analysis process for optimum design requires determining the load factor, pressure and velocity impact and optimum thickness distribution by finding the effect of blade shape by varying thickness on the basis of both the aerodynamic output and the structural weight.

Seagull in Wind Turbine Airfoil Blade Design Application Bionic

2013 ◽  
Vol 380-384 ◽  
pp. 4336-4339
Author(s):  
Hua Xin ◽  
Chun Hua Zhang ◽  
Qing Guo Zhang ◽  
Ping Wang
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Simulation Analysis ◽  
Turbine Blades ◽  
Clean Energy ◽  
Aerodynamic Performance ◽  
Blade Design ◽  
Wind Turbine Blades ◽  
Bionic Blade ◽  
Turbine Blade Design

Wind energy is an inexhaustible, an inexhaustible source of renewable and clean energy. Present due to the energy crisis and environmental protection and other issues, the use of wind more and more world attention. The wind turbine is the best form of wind energy conversion. Wind turbine wind turbine blades to capture wind energy is the core component of the blade in a natural environment to run directly in contact with air, with seagulls wings generate lift conditions are similar, so the gull wings airfoil and excellent conformation, with wind turbine blade design designed by combining the bionic blades. Through numerical simulation analysis found bionic blade aerodynamic performance than the standard blade aerodynamic performance has improved.

scholarly journals Second-generation composites from recycled wind turbine blades

2019 ◽  
Author(s):  
Azadeh Tavousi Tabatabaei ◽  
Seyed Hossein Mamanpush
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Second Generation ◽  
Turbine Blades ◽  
Clean Energy ◽  
Wind Turbine Blades ◽  
Environmental Attributes ◽  
The Us ◽  
The World

The demand for wind and other forms of clean energy is increasing in the US and throughout the world. Wind energy is also expected to provide 14.9% of the global electricity demand by 2020. Under this scenario, a significant amount of wind turbine blades (WTBs) will continue to burden our current landfills until a viable recycling strategy is found. Repurposing or recycling of end- of-use wind turbine blade material will provide both economic and environmental attributes.

scholarly journals Physical De-Icing Techniques for Wind Turbine Blades

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6750
Author(s):  
Valery Okulov ◽  
Ivan Kabardin ◽  
Dmitry Mukhin ◽  
Konstantin Stepanov ◽  
Nastasia Okulova
Keyword(s):  
Energy Consumption ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Turbine Blades ◽  
Energy Resources ◽  
The Arctic ◽  
Wind Turbine Blades ◽  
Optimal Methods ◽  
Superhydrophobic Coatings

The review reflects physical solutions for de-icing, one of the main problems that impedes the efficient use of wind turbines for autonomous energy resources in cold regions. This topic is currently very relevant for ensuring the dynamic development of wind energy in the Arctic. The review discusses an effective anti-icing strategy for wind turbine blades, including various passive and active physical de-icing techniques using superhydrophobic coatings, thermal heaters, ultrasonic and vibration devices, operating control to determine the optimal methods and their combinations. After a brief description of the active methods, the energy consumption required for their realization is estimated. Passive methods do not involve extra costs, so the review focuses on the most promising solutions with superhydrophobic coatings. Among them, special attention is paid to plastic coatings with a lithographic method of applying micro and nanostructures. This review is of interest to researchers who develop new effective solutions for protection against icing, in particular, when choosing systems for protecting wind turbines.

scholarly journals Assessment of Diurnal Wind Turbine Collision Risk for Grassland Birds on the Southern Great Plains

2016 ◽  
Vol 7 (1) ◽  
pp. 129-140 ◽  
Author(s):  
Sarah J. Wulff ◽  
Matthew J. Butler ◽  
Warren B. Ballard
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Great Plains ◽  
Wind Turbines ◽  
Turbine Blades ◽  
Bird Species ◽  
The United States ◽  
Southern Great Plains ◽  
Flight Height ◽  
Associated Species

Abstract Wind energy is one of the fastest growing renewable energy sources in the United States and has the potential to reduce the use of traditional nonrenewable energy. However, there is concern for potential short- and long-term influences on wildlife populations, such as bird collisions with turbine blades, habitat loss, habitat fragmentation, and habitat avoidance. Bird flight heights are indicative of collision risks, but knowledge of their distributions is limited. Our goal was to examine the diurnal flight heights of bird species to assess which are at greatest risk of collision with wind turbine blades. During October 2008–August 2009, we estimated the flight heights of 66 bird species at a planned wind energy facility on the southern Great Plains. Flight heights were estimated by measuring angle of incline with a clinometer and ground distance with a laser rangefinder. Previous work has been limited to flight height measurements categorized to site-specific rotor swept zone (RSZ) specifications that has resulted in limited applicability to other wind turbine RSZ specifications. Our research is distinctive because it provides more resolution in flight height estimates than those categorized into bins and allows application to wind turbines with different RSZs. We found that the flight heights of six bird species varied among seasons, indicating their risk of collision changed throughout the year. Observations indicated that the average flight heights of 28 bird species were within the potential RSZ (32–124 m above ground level) at our study site and that two species exhibited mean flight heights above the RSZ. Fifteen of those species were wetland-associated species, 7 were raptor or vulture species, and 6 were listed as species of greatest conservation need by Texas Parks and Wildlife Department. We observed 14 bird species (1 vulture, 2 raptors, 7 wetland-associated species, and 4 passerines or other species) with greater than 25% of their observed flight heights within the RSZ. Our results indicate that raptors and wetland-associated species are the avian groups at greatest risk of collision with wind turbines due to their diurnal flight heights. However, the resolution of our data will allow assessment of which bird species are at greatest risk of collision for various wind turbine specifications. This information can help guide site assessment and placement for wind energy facilities across the southern Great Plains and help mitigate potential collision impacts on bird species.

Preliminary Design of Wind Turbine Blades for Manufacture Using Local Capabilities

2001 ◽  
Author(s):  
Sarim N. Al-Zubaidy ◽  
Jacqueline Bridge ◽  
Alwyn Johnson
Keyword(s):  
Energy Source ◽  
Growth Rate ◽  
Wind Energy ◽  
Wind Turbine ◽  
Fluid Dynamic ◽  
Turbine Blades ◽  
Design Procedure ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Average Deviation

Abstract In the past ten to fifteen years wind energy remerged on the world scene with a very healthy growth rate, it has outstripped photovoltaics (solar cells) as the world’s fastest growing energy source, with a growth rate in excess of 30 percent per annum. No longer just a “nice idea for the future” Wind energy is becoming a mainstream energy source for many countries. The proposed paper will present a procedure (using numerical methods) for the design and analysis of Horizontal Axis Wind Turbine (HAWT) rotors. To ascertain the accuracy and to determine where further improvements could be initiated; numerical findings were then compared with published experimental test data and the compression showed an average deviation of less than 3% and therefore the simplifying assumptions made for the prediction of fluid behavior over an airfoil section was justified. Once the approach was validated and standardised a comprehensive airfoil design was produced. A computational fluid dynamic code coupled with a simple numerical algorithm aided the inverse design procedure. The final design was well proportioned and was theoretically able to meet the stated objective function and satisfied all the imposed constraints (manufacturing and geometrical). The geometrical data was then generated in a form suitable for manufacture using manually and numerically controlled machines.

Design Of Horizontal Type Of Wind Turbine On A Highrise Building

Kilat ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 309-319
Author(s):  
Wahirom - - ◽  
Nofirman - - ◽  
Prayudi -
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Rural Areas ◽  
Turbine Blades ◽  
Analytical Models ◽  
Torsional Angle ◽  
Wind Turbine Blades ◽  
Distribution Method ◽  
Energy Estimation ◽  
Horizontal Type

In making a horizontal type wind turbine, of course, it is necessary to analyze it in depth, one of which is by predicting the production of wind energy produced by the wind turbine to estimate the wind power in the wind turbine which will later be applied. Wind energy sources that are commonly used are located in rural areas, fields and even there is such a large amount of energy that it is sometimes difficult to reach the power grid and other large areas including the roofs of high-rise buildings. There are many analytical models in wind energy estimation, one of which is often done by many researchers, namely by using the Weibull distribution method. From the measurement results that as many as 1516.37 kWh with a 1 kW wind turbine with a radius of 1 meter (capacity factor 30.09%). Modeling wind turbine blades with NACA 4412 using Qblade software to determine the torsional angle of the blade to be applied so that it is obtained that the torsion angle from the base and The tip of the blade has a tilt angle of 19.05◦ to 6.96° with a maximum Cp of 0.5 this is a pretty good value in designing wind turbine blades.

Unsteady Flow Analysis Around an Elliptic-Bladed Savonius-Style Wind Turbine

2014 ◽  
Author(s):  
Abhisek Banerjee ◽  
Sukanta Roy ◽  
Prasenjit Mukherjee ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Turbine Blades ◽  
Flow Analysis ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Small Scale ◽  
Circular Design

Although considerable progress has already been achieved in the design of wind turbines, the available technical designs are not yet adequate to develop a reliable wind energy converter especially meant for small-scale applications. The Savonius-style wind turbine appears to be particularly promising for the small-scale applications because of its design simplicity, good starting ability, insensitivity to wind directions, relatively low operating speed, low cost and easy installation. However, its efficiency is reported to be inferior as compared to other wind turbines. Aiming for that, a number of investigations have been carried out to increase the performance of this turbine with various blade shapes. In the recent past, investigations with different blade geometries show that an elliptic-bladed turbine has the potential to harness wind energy more efficiently. In view of this, the present study attempts to assess the performance of an elliptic-bladed Savonius-style wind turbine using 2D unsteady simulations. The SST k-ω turbulence model is used to simulate the airflow over the turbine blades. The power and torque coefficients are calculated at rotating conditions, and the results obtained are validated with the wind tunnel experimental data. Both the computational and experimental studies indicate a better performance with the elliptical blades. Further, the present analysis also demonstrates improved flow characteristics of the elliptic-bladed turbine over the conventional semi-circular design.

Design and Performance Prediction of Low Cost Vertical Axis Wind Turbine

2015 ◽  
Vol 813-814 ◽  
pp. 1070-1074
Author(s):  
T. Micha Premkumar ◽  
T. Mohan ◽  
Sivamani Seralathan ◽  
A. Sudheer Kumar
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Energy Demand ◽  
Low Cost ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Load Factor ◽  
Vertical Axis Wind Turbine

The capacity of wind power generation has increased across India due to various activities encouraged by government. Moreover, onshore potential in India is in the order of 100GW. However, the plant load factor is often very low in wind power production. In most of the place, low-rated wind speed is available. Effective utilization of the wind to produce small power will reduces the grid load. There is in need to effectively utilize the available potential to meet the energy demand. The low cost vertical axis wind turbine designed for low rated wind regime has the hybrid of simple Savonius and helical Savonius. Various experimental parameters are measured to check the suitability of the vertical axis wind turbine in the low rated wind speed regions. Numerical simulation are carried out for three dimensional steady flow around the combined Savonius and helical Savonius vertical axis wind turbine blades using ANSYS Fluent(C). Numerical investigation are conducted to study the effect of hybrid combination on performance of the rotor in terms of coefficient of torque, coefficient of power, etc. Self-starting behaviour of the vertical axis wind turbine is improved by using this hybrid vertical axis wind turbine.

Sign in / Sign up

Export Citation Format

Share Document