scholarly journals CBCT assessment of alveolar buccal bone level after RME

2012 ◽  
Vol 83 (1) ◽  
pp. 110-116 ◽  
Author(s):  
Valmy Pangrazio-Kulbersh ◽  
Brynn Jezdimir ◽  
Mariana de Deus Haughey ◽  
Richard Kulbersh ◽  
Paul Wine ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Population Sample ◽  
Comprehensive Treatment ◽  
Maxillary Expansion ◽  
Bone Thickness ◽  
Significant Difference ◽  
Bone Level ◽  
Marginal Bone Level ◽  
The Right ◽  
Post Hoc

Abstract Objective: To evaluate the maxillary alveolar buccal bone levels after expansion with banded and bonded expanders, using cone-beam computed tomography (CBCT). Materials and Methods: The population sample consisted of 22 patients who required expansion during their comprehensive treatment; 10 patients (five males and five females) with a mean age of 13.5 years (CVMS 3) had bonded hygienic expanders, and 12 (six males and six females) with a mean age of 12.6 years (CVMS 3) had banded hyrax expanders. CBCT was taken both before (T1) and 6 months after last activation (T2). Measurements were made for buccal bone thickness (BT), buccal marginal bone level (MBL), and bone thickness level (BTL) at the right first molar (MRt), left first molar (MLft), right first premolar (PMRt), and left first premolar (PMLft). A mixed-design analysis of variance assessed differences between and within the groups. Post hoc t-tests were completed on significant analysis of variance results to determine where differences occurred. Results: Analysis of variance revealed no significant differences between or within the two groups. BT significantly decreased horizontally following rapid maxillary expansion. The amount of bone lost was −0.59 mm MRt, −0.72 mm PMRt, −0.50 mm MLft, and −0.57 mm PMLft (P < .003). Conclusions: There was no significant difference between or within the two groups. Buccal bone loss in the vertical dimension (MBL) only showed significance in the banded group for MRt (0.63 mm) and PMLFt (0.37 mm) as evidenced by the paired t-test (P < .05).

scholarly journals A 3-D evaluation of transverse dentoalveolar changes and maxillary first molar root length after rapid or slow maxillary expansion in children

2019 ◽  
Vol 24 (3) ◽  
pp. 79-87 ◽  
Author(s):  
Helder Baldi Jacob ◽  
Gerson Luiz Ulema Ribeiro ◽  
Jeryl D. English ◽  
Juliana da Silva Pereira ◽  
Mauricio Brunetto
Keyword(s):  
Root Length ◽  
Root Formation ◽  
Tooth Movement ◽  
Root Resorption ◽  
Root Apex ◽  
Cone Beam ◽  
Maxillary Expansion ◽  
Bone Thickness ◽  
Significant Difference ◽  
Bone Changes

ABSTRACT Objective: The objective of the present study was to conduct a randomized clinical trial comparing the effects of rapid maxillary expansion (RME) and slow maxillary expansion (SME). Maxillary permanent first molar root length and tooth movement through the alveolus were studied using cone-beam computed tomography (CBCT). Methods: Subjects with maxillary transverse deficiencies between 7 and 10 years of age were included. Using Haas-type expanders, children were randomly assigned to two groups: RME (19 subjects, mean age of 8.60 years) and SME (13 subjects, mean age of 8.70 years). Results: Buccal cortical, buccal bone thicknesses and dentoalveolar width decreased in both groups. In the RME group the greatest decrease was related to distal bone thickness (1.26 mm), followed by mesial bone thickness (1.09 mm), alveolar width (0.57 mm), and the buccal cortical (0.19 mm). In the SME group the mesial bone thickness decreased the most (0.87 mm) and the buccal cortical decreased the least (0.22 mm). The lingual bone thickness increased in the RME and SME groups (0.56 mm and 0.42 mm, respectively). The mesial root significantly increased in the RME group (0.52 mm) and in the SME group (0.40 mm), possibly due to incomplete root apex formation at T1 (prior to installation of expanders). Conclusions: Maxillary expansion (RME and SME) does not interrupt root formation neither shows first molar apical root resorption in juvenile patients. Although slightly larger in the RME group than SME group, both activation protocols showed similar buccal bone thickness and lingual bone thickness changes, without significant difference; and RME presented similar buccal cortical bone changes to SME.

Effects of Ultrasonic Skeletonization of the Gastroepiploic Artery on Endothelial Nitric Oxide Production

2009 ◽  
Vol 4 (2) ◽  
pp. 93-98 ◽  
Author(s):  
Takuro Terada ◽  
Shigeyuki Tomita ◽  
Yoshihide Asaumi ◽  
Yoshinao Koshida ◽  
Nobuki Ishikawa ◽  
...  
Keyword(s):  
Nitric Oxide ◽  
Artery Bypass ◽  
Gastroepiploic Artery ◽  
No Production ◽  
Significant Difference ◽  
Basal Plasma ◽  
Electrosurgical Unit ◽  
The Right ◽  
Post Hoc ◽  
Endothelial Nitric Oxide

Objective The right gastroepiploic artery (GEA) is a reliable conduit for coronary artery bypass grafting. Recently, ultrasonic skeletonization in graft harvesting has attracted attention as an alternative technique to increase the length and caliber size of grafts. The influence of GEA skeletonization using an ultrasonically activated device with that using an electrosurgical unit was compared from the viewpoint of production of nitric oxide (NO). Methods Fourteen pigs were used in this study. The GEA were harvested using an ultrasonically activated device (group ultrasonically activated device [USAD], n = 7) or electrocautery (group E, n = 7). Blood sampling was performed at the following three times from the distal end of the GEA: (1) preskeletonization, (2) pedicle, and (3) postskeletonization. Plasma NOx (NO metabolites) levels were measured by chemiluminescent assay. Moreover, in excised specimens, the expression of nitric oxide synthase was examined immunohistologically. Results In group USAD, the preskeletonization basal level of plasmaNOx in GEA was 25.7 ± 10.9 μmol/L, which then increased to 26.9 ± 10.5 μmol/L (pedicle) and 32.2 ± 12.1 μmol/L (postskeletonization). In group E, the preskeletonization basal plasma NOx level in GEA was 28.9 ± 11.4 μmol/L, which changed to 27.5 ± 8.9 μmol/L (pedicle) and 21.8 ± 8.3 μmol/L (postskeletonization). The results of multivariate analysis indicated that the patterns of changes in plasma NOx level were significantly different in both groups (P = 0.024). In group USAD, post hoc multiple comparison tests revealed a significant difference between preskeletonization and postskeletonization (P = 0.037). Conclusions Ultrasonically skeletonized GEA showed increased effective graft length, higher free flow capacity, and increased endothelial NO production than that prepared using an electrosurgical unit.

scholarly journals Influence of maxillary canine torque variations on the perception of smile esthetics among orthodontists and laypersons

2019 ◽  
Vol 24 (1) ◽  
pp. 53-61 ◽  
Author(s):  
Thiago Correia Barbosa Lemos ◽  
Juliana de Brito Vasconcelos ◽  
Bianca Mota dos Santos ◽  
Andre Wilson Machado
Keyword(s):  
Analysis Of Variance ◽  
T Test ◽  
Test Results ◽  
Maxillary Canine ◽  
Visual Analog Scales ◽  
Significant Difference ◽  
Unpaired Student ◽  
Full Face ◽  
Smile Esthetics ◽  
Post Hoc

ABSTRACT Objective: The purpose of this study was to determine the perception of smile esthetics among orthodontists and laypersons with respect to unilateral maxillary canine torque variations in a frontal smile analysis. Methods: Full face and close-up smile photographs of two subjects (1 man and 1 woman) were used. Both smiles displayed healthy maxillary anterior dentitions. The images were digitally altered to obtain a bilateral 0° torque in the maxillary canines. From this image, unilateral variations of the left canine were made with -15°, -10°, -5°, 0°, +5°, +10° and +15°. Final images were randomly assembled into an album that was given to 53 orthodontists and 53 laypersons. Each rater was asked to evaluate the attractiveness of the images using visual analog scales. Data collected were statistically analyzed with one-way analysis of variance with Tukey post-hoc test and the unpaired Student t test. Results: For orthodontists, most attractive smiles were those with 0°, -5° and -10°. For laypersons, most attractive smiles were those with 0°, -5°, -10°, -15° and + 5°. For both groups, the lowest scores were given for the smiles with +10° and +15° torque. When comparing the perceptions of the orthodontists and laypersons, they did not show statistical differences in most situations. Moreover, in general, there was no significant difference between the full-face and close-up assessments of the smiles. Conclusions: The present findings indicated that smiles with unilateral palatal (negative values) maxillary canine torque variations were more tolerated than smiles with buccal crown torque (positive values) variations.

scholarly journals Radiographic evaluation of a cross-shaped incision technique for thick-gingiva and thin-gingiva patients treated with implant-supported fixed prosthesis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Wen Luo ◽  
Xinyu Wang ◽  
Yaqian Chen ◽  
Yuping Hong ◽  
Yili Qu ◽  
...  
Keyword(s):  
Gingival Recession ◽  
Trial Registration ◽  
Radiographic Evaluation ◽  
Significant Difference ◽  
Registration Number ◽  
Bone Level ◽  
Fixed Prosthesis ◽  
Marginal Bone Level ◽  
Incision Technique

Abstract Background To evaluate a cross-shaped incision technique for thick-gingiva and thin-gingiva patients treated with implant-supported fixed prosthesis. Methods Total 55 patients receiving cross-shaped incision were assigned into thick-gingiva group (29 cases) and thin-gingiva group (26 cases). Follow-up was performed at 3 and 12-month after final restoration. Results Mesial and distal papilla height was significantly greater in thick-gingiva group than thin-gingiva group at 3 and 12 months, while periodontal depth and crestal marginal bone level around implant had no significant difference between the two groups during follow-up. No case of recession of buccal marginal gingiva was observed in thick-gingiva group. However, the recession of marginal gingiva of buccal aspect of the crown was found in 5 patients (19.2%) with thin-gingiva. Conclusions The cross-shaped incision may be applied to reconstruct gingival papillae and avoid the gingival recession in patients with thick-gingiva phenotype. Trial registration This study was registered at ClinicalTrials.gov (registration number NCT04706078, date 12 January 2021, Retrospectively registered).

scholarly journals Bilateral Differences in Peak Force, Power, and Maximum Plié Depth During Multiple Grande Jetés

2013 ◽  
Vol 28 (1) ◽  
pp. 28-32 ◽  
Author(s):  
Matthew Wyon ◽  
Julie Harris ◽  
Derrick Brown ◽  
Frances Clarke
Keyword(s):  
Knee Flexion ◽  
Professional Training ◽  
Peak Force ◽  
Dance Training ◽  
Significant Difference ◽  
Bilateral Differences ◽  
The Right ◽  
Lateral Bias ◽  
Post Hoc ◽  
Leg Dominance

A lateral bias has been previously reported in dance training. The aim of this study was to investigate whether there are any bilateral differences in peak forces, power, and maximum knee flexion during a sequence of three grand jetés and how they relate to leg dominance. A randomised observational design was selected for the study. Volunteers consisted of 20 female dancers in the last year of pre-professional training. All volunteers completed three different tests to determine leg dominance prior to completing a three grande jeté sequence. The lead leg for the jump sequence was randomised. Peak take-off power, relative landing force (BW), and maximum knee flexion angles were measured using a Myotest accelerometer and integrated goniometer. Results indicated that 90% of dancers reported right leg dominance. A significant difference was noted in peak take-off power among the jumps (p<0.01); post hoc test indicated jump 3 was significantly greater than jump 1. Mean maximum take-off knee angles increased over the three-jump sequence with the left leg having a significantly deeper plié than the right (p<0.01). Landing data showed an increase in peak force and a decrease in maximum knee angles across the jump sequence. The present data indicate different bilateral strategies during take-off and landing during grand jetés in female dancers resulting in increased forces during the jumps on the non-dominant side. These differences need to be addressed by incorporating appropriate modifications in training methodology that eliminates the observed bilateral differences.

scholarly journals Patients with Poor Response to Antipsychotics Have a More Severe Pattern of Frontal Atrophy: A Voxel-Based Morphometry Study of Treatment Resistance in Schizophrenia

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Mario Quarantelli ◽  
Olga Palladino ◽  
Anna Prinster ◽  
Vittorio Schiavone ◽  
Barbara Carotenuto ◽  
...  
Keyword(s):  
Grey Matter ◽  
Temporal Cortex ◽  
Region Of Interest ◽  
Treatment Resistance ◽  
Poor Response ◽  
Mr Studies ◽  
Normal Volunteers ◽  
Significant Difference ◽  
The Right ◽  
Post Hoc

Approximately 30% of schizophrenia patients do not respond adequately to the therapy. Previous MRI studies have suggested that drug treatment resistance is associated with brain morphological abnormalities, although region-of-interest analysis of MR studies from nonresponder and responder patients failed to demonstrate a statistically significant difference between these two schizophrenia subgroups. We have used a voxel-based analysis of segmented MR studies to assess structural cerebral differences in 20 nonresponder and 15 responder patients and 16 age-matched normal volunteers. Differences between the three groups emerged bilaterally mainly at the level of the superior and middle frontal gyri, primarily due to reduced grey matter volumes in nonresponders, as compared to both normal volunteers and responder patients. Post hoc direct comparison between the two schizophrenia subgroups demonstrated significantly reduced grey matter volumes in middle frontal gyrus bilaterally, in the dorsolateral aspects of left superior frontal gyrus extending into postcentral gyrus and in the right medial temporal cortex. Our results extend and integrate previous findings suggesting a more severe atrophy in nonresponder schizophrenia patients, compared to responder patients, mainly at the level of the superior and middle frontal gyri. Longitudinal studies in drug-naïve patients are needed to assess the role of these associations.

The effect of varying encoding conditions on jazz, instrumental, and choral musicians’ memorization accuracy: Implications for music literacy

2021 ◽  
pp. 030573562198897
Author(s):  
Aaron Lohmeyer
Keyword(s):  
Analysis Of Variance ◽  
Repeated Measures ◽  
Concert Band ◽  
Music Literacy ◽  
Significant Difference ◽  
Band Group ◽  
Music Memorization ◽  
Post Hoc

The primary purposes of this study were (1) to determine the effect of three encoding conditions (singing, playing, studying silently) on participants’ music memorization accuracy; (2) to examine potential differences between choral, jazz, and concert band musicians’ accuracy in completing the music memorization task; and (3) to determine whether ensemble affiliation yielded any performance advantages among the three presentation conditions. Three folk melodies were selected for memorization under the three encoding conditions. Participants ( N = 81) had 75 s to commit each melody to memory while studying silently, singing, or playing on a keyboard. Participants then notated the three melodies using conventional staff notation. A two-way analysis of variance (ANOVA) with repeated measures on one factor revealed significant differences based on participants’ ensemble affiliation. A Tukey’s honest significant difference (HSD) post hoc test revealed the jazz group had higher accuracy scores than the band group. No significant differences were found based on encoding conditions, and no significant interactions were found between the encoding conditions and ensemble groups. The experiment is framed by questions related to memory, reading, and differing notions of literacy.

scholarly journals The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials

2020 ◽  
pp. 346-357
Author(s):  
Ayşe Tuğba Ertürk-Avunduk ◽  
Seçkin Aksu ◽  
Ebru Delikan
Keyword(s):  
Analysis Of Variance ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Multiple Comparison ◽  
Color Measurement ◽  
Distilled Water ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (∆E₀₀) were subsequently calculated. A two-way analysis of variance and Duncan’s post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ∆E₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ∆E₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

scholarly journals Fluoride release from two types of fluoride-containing orthodontic adhesives: Conventional versus resin-modified glass ionomer cements—An in vitro study

PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0247716
Author(s):  
Yasemin Dziuk ◽  
Sachin Chhatwani ◽  
Stephan C. Möhlhenrich ◽  
Sabrina Tulka ◽  
Ella A. Naumova ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Free Water ◽  
P Value ◽  
Orthodontic Appliances ◽  
Fluoride Release ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Fluoride Ions ◽  
Significant Difference ◽  
Post Hoc

Introduction Development of white spot lesions (WSLs) during orthodontic treatment is a common risk factor. Fixation of the orthodontic appliances with glass ionomer cements could reduce the prevalence of WSL’s due to their fluoride release capacities. The purpose of this study was to evaluate differences of fluoride release properties from resin-modified and conventional glass ionomer cements (GICs). Methods The resin-modified GICs Fuji ORTHO LC (GC Orthodontics), Meron Plus QM (VOCO), as well as the conventional GICs Fuji ORTHO (GC Orthodontics), Meron (VOCO) and Ketac Cem Easymix (3M ESPE) were tested in this study. The different types of GICs were applied to hydroxyapatite discs according to the manufacturer’s instructions and stored in a solution of TISAB III (Total Ionic Strength Adjustment Buffer III) and fluoride-free water at 37°C. Fluoride measurements were made after 5 minutes, 2 hours, 24 hours, 14 days, 28 days, 2 months, 3 months and 6 months. One factor analysis of variance (ANOVA) was used for the overall comparison of the cumulative fluoride release (from measurement times of 5 minutes to 6 months) between the different materials with the overall level of significance set to 0.05. Tukey’s post hoc test was used for post hoc pairwise comparisons in the cumulative fluoride release between the different materials. Results The cumulative fluoride release (mean ± sd) in descending order was: Fuji ORTHO LC (221.7 ± 10.29 ppm), Fuji ORTHO (191.5 ± 15.03 ppm), Meron Plus QM (173.0 ± 5.89 ppm), Meron (161.3 ± 7.84 ppm) and Ketac Cem Easymix (154.6 ± 6.09 ppm) within 6 months. Analysis of variance detected a significant difference in the cumulative fluoride release between at least two of the materials (rounded p-value < 0.001). Pairwise analysis with Tukey’s post hoc test showed a significant difference in the cumulative fluoride release for all the comparisons except M and MPQM (p = 0.061) and KCE and M (p = 0.517). Conclusion Fluoride ions were released cumulatively over the entire test period for all products. When comparing the two products from the same company (Fuji ORTHO LC vs. Fuji ORTHO from GC Orthodontics Europe GmbH and Meron Plus QM vs. Meron from VOCO GmbH, Mannheim, Germany), it can be said that the resin-modified GICs have a higher release than conventional GICs. The highest individual fluoride release of all GICs was at 24 hours. A general statement, whether resin-modified or conventional GICs have a higher release of fluoride cannot be made.

scholarly journals Evaluation of the basic surface roughness of an ISO-certified and non-ISO-certified slot bracket with an atomic force microscope

2019 ◽  
Vol 31 (2) ◽  
pp. 91
Author(s):  
Chrisni Oktavia Jusup ◽  
Eky Setiawan Soeria Soemantri ◽  
Endah Mardiati ◽  
Ida Ayu Evangelina
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Atomic Force Microscope ◽  
Tooth Movement ◽  
Average Roughness ◽  
Base Surface ◽  
Atomic Force ◽  
Significant Difference ◽  
The Right ◽  
Post Hoc

Introduction: The base surface roughness of slot bracket can affect friction in tooth movement. There are ISO-certified and non-ISO-certified stainless steel brackets on the market. Thus orthodontists must be careful in choosing the right bracket. This study was aimed to evaluate the differences of the surface roughness of ISO-certified and non-ISO-certified Roth 0.022 inch stainless steel bracket with the parameter of S a (average roughness). Methods: This research was a laboratory observational. Samples were taken randomly as many as 32 brackets divided into two groups, each consisted of two bracket brands. Surface roughness measurements were performed using an atomic force microscope (AFM), then the data were analysed by ANOVA test (p &lt; 0.05) and Post-Hoc analysis. Results: The ISO-certified bracket has an S a value smaller than the non-ISO-certified bracket. There was a significant difference in the surface roughness of the ISO-certified and non-ISO-certified slot bracket base (p &lt; 0.05). Conclusion: The ISO-certified bracket has a smoother base surface than the non-ISO-certified bracket base.Keywords: Surface roughness, stainless steel slot bracket, atomic force microscope

Sign in / Sign up

Export Citation Format

Share Document