scholarly journals EVALUATION OF SEED YIELD, OIL AND MINERAL CONTENTS IN-BRED PUMPKIN LINES (Cucurbita pepo L.) UNDER WATER STRESS

2020 ◽  
Vol 19 (3) ◽  
pp. 89-99
Author(s):  
Musa Seymen ◽  
Atilla Dursun ◽  
Duran Yavuz ◽  
Ertan Sait Kurtar ◽  
Aynur Özbahçe ◽  
...  
Keyword(s):  
Water Stress ◽  
Seed Yield ◽  
Block Design ◽  
Crop Productivity ◽  
Hybrid Breeding ◽  
Mineral Contents ◽  
Randomized Block Design ◽  
Hybrid Variety ◽  
Total Oil ◽  
Pure Lines

Water stress is one of the main constraints which could limits crop productivity, especially in arid and semi-arid regions characterized limited water resources. This study was conducted to investigate the seed yield, oil and mineral contents of 44 lines and 4 commercial pumpkin varieties (2 local and 2 hybrids) in irrigated and drought stress conditions. The study was conceived as a randomized block design with three replications and carried out during the 2017 growing season. On average, the irrigated plots produced 161.27 kg da–1 seed yield whereas it was 33.67 kg da–1 in non-irrigated plots. The highest yield among the commercial pumpkin varieties was obtained from the G2 hybrid variety in the irrigated conditions. On the other hand, in the non-irrigated plots, higher seed yields were obtained from G9, G34, and G36 pure lines. Drought resulted in a remarkable decrease in the total oil content and significant increase in the amount of Ca and Zn in pumpkin seeds. These results clearly indicated that G9 line, which has the highest seed yield in both irrigated and drought conditions, can be utilized as a recommendable parental pumpkin line in future hybrid breeding efforts.

Heterosis, inbreeding depression and their relationship with genetic divergence in sesame ( Sesamum indicum L.)

2010 ◽  
Vol 58 (3) ◽  
pp. 313-321 ◽  
Author(s):  
P. Banerjee ◽  
P. Kole
Keyword(s):  
Plant Height ◽  
Inbreeding Depression ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Basic Material ◽  
Branch Number ◽  
Randomized Block Design ◽  
Component Traits ◽  
Pure Lines

Seven parents (CST2002, MT34, OS-Sel-2, TKG22, AAUDT9304-14-4, B67 and Rama), their 21 F 1 s and 21 F 2 s were grown in summer 2003 in a randomized block design with three replications. Heterosis and inbreeding depression were studied for seven important yield-contributing characters (plant height, branch number plant −1 , capsules plant −1 , seeds capsule −1 , 1000-seed weight, stick yield plant −1 and seed yield plant −1 ). Maximum heterosis for seed yield plant −1 over the mid- and better-parent was recorded in CST2002×TKG22 (43.30%) and MT34×B67 (27.22%), respectively. Mid-parent heterosis for seed yield plant −1 was due to cumulative heterosis for various important component traits, such as capsules plant −1 , seeds capsule −1 and 1000-seed weight. Inbreeding depression was highest for seed yield, followed by 1000-seed weight, capsules plant −1 , branch number and plant height, indicating the predominance of non-additive genetic effects. B67×Rama exhibited significant positive heterosis in F 1 , but non-significant inbreeding depression in F 2 for seed yield. This cross can be utilized as basic material for identifying better pure lines. The clustering pattern indicated that in general genetically diverse parents exhibited more heterosis, as evident in the majority of the crosses.

scholarly journals Effect of potassium and boron spraying in yield and quality characteristics for sunflower crop Helianthus annuus L. var luleo

2021 ◽  
Vol 8 (2) ◽  
Author(s):  
Y . K Chellab ◽  
H . A Fadel
Keyword(s):  
Seed Yield ◽  
Block Design ◽  
Quality Characteristics ◽  
Seed Fertility ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Sunflower Crop ◽  
Total Oil ◽  
Total Seed

"A field experiment was carried out during the autumn season of 2016 in one of the Agricultural fields in the area of Abu- Guelana ,which is 13 km from the center of Muthanna province , To find out the effect of potassium and boron spraying in the yield and quality characteristics , for sunflower crop - variety Luleo.Used in this study completely randomized block design Arrangement factorial experiment , The study included two factors : The first factors of four concentrations of potassium spray (0, 2500, 5000, 7500) mg K L-1 , and the second factor four concentrations of boron spray (0, 50, 100, 150) mg B L-1 . The mean of the treatments was compared with the least significant difference (L.S.D) at a probability level of 0.05% . Results showed that the potassium spray treatment 7500 mg k L-1 was significantly higher in all studied traits ,(number of seeds/head , weight of thousand seed , fertility percentage ,seed yield , total seed yield and total oil yield) , The results showed that the treatment of boron spray with 100 mg B L-1 concentration was significantly higher in all studied traits. The overlap treatment showed significant superiority in all the traits"

Estimation of combining ability and gene action for yield and its components in pigeonpea [Cajanus cajan (L.) Millspaugh]

2017 ◽  
Vol 51 (06) ◽  
Author(s):  
Rakesh Kumar Maida ◽  
M. P. Patel ◽  
Chandrabhan Ahirwar ◽  
A. M. Patel
Keyword(s):  
Seed Yield ◽  
Combining Ability ◽  
Gene Action ◽  
Block Design ◽  
Hybrid Breeding ◽  
Additive Gene Action ◽  
Randomized Block Design ◽  
Diallel Mating Design ◽  
Breeding Programmes ◽  
Additive Gene

Twenty eight hybrids developed by utilizing eight parents in 8 x 8 diallel mating design excluding reciprocals were evaluated in randomized block design with three replications for twelve characters in order to understand the combining ability and gene action in pigeonpea. The analysis of variance for combining ability revealed presence of additive and non- additive gene action. The ratio of gca/sca variance was less than unity which indicated the preponderance of non- additive gene action for action in the control of pod length, harvest index, protein content and leaf area. The estimates of general combining ability suggested that parents ICPL-87119, GT-103 and AGT-2 were good general combiners for seed yield per plant and its attributing characters while, hybrids UPAS-120 x GT-103, BSMR-853 x BANAS and BSMR-853 x GT-1 showed the higher order sca effect for seed yield per plant. These cross combinations can be potentially utilized in hybrid breeding programmes.

Combining ability and heterosis studies across environments in linseed (Linum usitatissimum L.)

2011 ◽  
Vol 59 (1) ◽  
pp. 87-102 ◽  
Author(s):  
S. Sood ◽  
N. Kalia ◽  
S. Bhateria
Keyword(s):  
Seed Yield ◽  
Linum Usitatissimum ◽  
Combining Ability ◽  
Yield Components ◽  
Block Design ◽  
Linum Usitatissimum L ◽  
Randomized Block Design ◽  
Component Traits ◽  
Parental Lines ◽  
Fibre Yield

Combining ability and heterosis were calculated for fourteen lines of linseed in a line × tester mating design using twelve lines and two diverse testers in two different environments. The hybrids and parental lines were raised in a completely randomized block design with three replications to investigate seed and fibre yield and their component traits. Genetic variation was significant for most of the traits over environments. Combining ability studies revealed that the lines KL-221 and LCK-9826 were good general combiners for seed yield and most of its components, whereas LMH-62 and LC-2323 were good general combiners for yield components only. Moreover, KL-221 was also a good general combiner for fibre yield. Similarly, B-509 and Ariane were good general combiners for fibre yield and most of its components. Among the specific cross combinations, B-509 × Flak-1 was outstanding for seed yield per plant and B-509 × KL-187 and LC-2323 × LCK-9826 for fibre yield per plant, with high SCA effects. In general, the hybrids excelled their respective parents and the standard checks for most of the characters studied. Based on the comparison of mean performance, SCA effects and the extent of heterosis, the hybrids LC-2323 × LCK-9826 and B-509 × KL-221 appeared to be the most promising for both seed and fibre yield. Other promising combinations were LC-2323 × KL-210 and B-509 × Ariane for seed and fibre yield, respectively. The superiority of LC-2323, LCK-9826, KL-221, B-509 and Ariane as good general combiners was further confirmed by the involvement of these parents in the desirable cross combinations.

Effect of Irrigation Methods and Mulching on Growth and Seed Yield of Semialata

2020 ◽  
Vol 7 (01) ◽  
Author(s):  
SK SRIVASTAVA ◽  
PAWAN JEET
Keyword(s):  
Seed Yield ◽  
Drip Irrigation ◽  
Growth Parameters ◽  
Block Design ◽  
Water Requirement ◽  
Furrow Irrigation ◽  
Plastic Mulch ◽  
Randomized Block Design ◽  
Daily Water ◽  
Black Plastic

A study was conducted to assess the effect of drip irrigation and plastic mulch on growth and seed yield of Semialata. Two types of plastic mulch (green and silver/black) were tested at three levels of irrigation (120%, 100% and 80%) by drip irrigation and one level (100%) by furrow irrigation. The daily water requirement of Semialata was estimated by the equation ETcrop= ETox crop factor. ETcrop is crop water requirement mm/day. ETo (reference evapotranspiration, mm/day) was calculated by FAO calculator which uses temperature and humidity data. In this experiments there were twelve treatments were considered. The treatments were replicated thrice. The experiment was laid in randomized block design. It was observed that drip irrigation with or without plastic mulch is yielding better results in terms of growth parameters and seed yield as compared to furrow irrigation without plastic mulch. It was also observed that maximum suppression (67.58%) of weeds resulted with drip irrigation and silver/black plastic mulch at 80% level of irrigation.

scholarly journals Quantification of Avoidable Yield Losses in Oilseed Brassica Caused by Insect Pests

2011 ◽  
Vol 51 (1) ◽  
pp. 38-43 ◽  
Author(s):  
Jagdev Kular ◽  
Sarwan Kumar
Keyword(s):  
Seed Yield ◽  
Yield Loss ◽  
Insect Pests ◽  
Block Design ◽  
Maximum Yield ◽  
The Other ◽  
Yield Losses ◽  
Eruca Sativa ◽  
Mustard Aphid ◽  
Randomized Block Design

Quantification of Avoidable Yield Losses in OilseedBrassicaCaused by Insect PestsA six year field study was conducted from 2001-2002 to 2006-2007 at Punjab Agricultural University, Ludhiana, India to study the losses in seed yield of differentBrassicaspecies (B. juncea, B. napus, B. carinata, B. rapaandEruca sativa) by the infestation of insect pests. The experiment was conducted in two different sets viz. protected/sprayed and unprotected, in a randomized block design, with three replications. Data on the infestation of insect pests, and seed yield were recorded at weekly intervals and at harvest, respectively. The loss in seed yield, due to mustard aphid and cabbage caterpillar, varied from 6.5 to 26.4 per cent.E. sativasuffered the least loss in seed yield and harboured the minimum population of mustard aphid (2.1 aphids/plant) and cabbage caterpillar (2.4 larvae/plant). On the other hand,B. carinatawas highly susceptible to the cabbage caterpillar (26.2 larvae/plant) and suffered the maximum yield loss (26.4%).

scholarly journals Application of multivariate techniques in the evaluation of pure lines of beans

2016 ◽  
Vol 46 (9) ◽  
pp. 1535-1541 ◽  
Author(s):  
Rodolfo Schmit ◽  
Rita Carolina de Melo ◽  
Thayse Cristine Vieira Pereira ◽  
Mattheus Beck ◽  
Altamir Frederico Guidolin ◽  
...  
Keyword(s):  
Discriminant Analysis ◽  
Discriminant Function ◽  
Block Design ◽  
Original Data ◽  
Inbred Lines ◽  
Canonical Discriminant Analysis ◽  
Multivariate Techniques ◽  
Testing Hypotheses ◽  
Randomized Block Design ◽  
Pure Lines

ABSTRACT: The objective of this study was to apply multivariate techniques, canonical discriminant analysis, and multivariate contrasts, indicating the most favorable inferences in the evaluation of pure lines of beans. The study was conducted at the experimental field of the Institute for Breeding and Molecular Genetics, in Lages, SC, Brazil. The experiment was composed of 24 pure lines of beans from the Santa Catarina test of cultivars. Plant height, numbers of pods and grains per plant, and stem diameter were the variables measured. The complete randomized block design was used with four replications. The data were subjected to multivariate analysis of variance, canonical discriminant analysis, multivariate contrasts and univariate contrasts. The first canonical discriminant function has captured 81% of the total variation in the data. The Scott-Knott test showed two groups of inbred lines at the average -of scores of the first canonical discriminant function. It was considered that testing hypotheses with the canonical scores may result in loss of information obtained from the original data. Multivariate contrasts indicated differences within the group formed by the Scott-Knott test. The canonical discriminant analysis and multivariate contrasts are excellent techniques to be combined in the multivariate assessment, being used to explore and test hypotheses, respectively.

scholarly journals Cowpea bean production under water stress using hydrogels

2017 ◽  
Vol 47 (1) ◽  
pp. 87-92 ◽  
Author(s):  
Marília Barcelos Souza Lopes ◽  
Taynar Coelho de Oliveira Tavares ◽  
Danilo Alves Veloso ◽  
Niléia Cristina da Silva ◽  
Rodrigo Ribeiro Fidelis
Keyword(s):  
Water Stress ◽  
Water Use ◽  
Food Production ◽  
Water Retention ◽  
Block Design ◽  
Population Increase ◽  
Water Retention Capacity ◽  
Yield Losses ◽  
Retention Capacity ◽  
Randomized Block Design

ABSTRACT The population increase and the need of intensifying food production, coupled with the scarcity of water resources, have led to the search of alternatives that reduce consumption and optimize the water use during cultivation. In this context, hydrogels become a strategy in agricultural management, due to their water retention capacity in the soil and availability to plants. This study aimed at evaluating the efficiency of hydrogels on the development and production of cowpea bean ('Sempre-verde' cultivar) under water stress, in a greenhouse. The experiment was performed in a randomized block design, with five replications, in a 4 x 5 factorial scheme, consisting of four types of hydrogel (Hydroplan-EB HyA, with granulometry of 1-3 mm; Hydroplan-EB HyB, with granulometry of 0.5-1 mm; Hydroplan-EB HyC, with granulometry < 0.5 mm; Polim-Agri, with granulometry of 1-0.5 mm) and five concentrations (0 g pot-1; 1.5 g pot-1; 3 g pot-1; 4.5 g pot-1; 6 g pot-1). The following traits were evaluated: number of pods per plant, number of grains per pod and grain yield. The highest concentration (6 g pot-1) resulted in a higher number of pods and yield for all the hydrogels, especially for HyC and Polim-Agro, which presented 7.4 pods plant-1 and 7.0 pods plant-1, with yield of 15.43 g plant-1 and 16.68 g plant-1, respectively. The use of hydrogel shows to be efficient for reducing yield losses under water stress.

scholarly journals Peningkatan Produktivitas Tanaman Padi Sawah Melalui Pemupukan Kompos dan NPK

2019 ◽  
Vol 9 (2) ◽  
pp. 178
Author(s):  
I GUSTI PUTU RATNA ADI ◽  
I NYOMAN PUJA
Keyword(s):  
Rice Yield ◽  
Block Design ◽  
Chemical Properties ◽  
Crop Productivity ◽  
Grain Weight ◽  
Npk Fertilizers ◽  
Randomized Block Design ◽  
Two Factors ◽  
Total P ◽  
Npk Fertilization

Increased Rice Crop Productivity Through Compost and NPK Fertilization. The aims of this research was to study response of compost and NPK fertilizers to the soil chemical properties and rice yield. The method used was a factorial Randomized Block Design consisting of two factors. The first factor was compost Fertilizer (B) consists of 2 levels, namely: B0 = Without compost fertilizer and B1 = 5 ton compost fertilizer ha-1. The second factors was NPK national recomendation (P) consists of 3 levels, namely: P1 = 50% of NPK recommendation, P2 = 100% of NPK recommendation and P3 = 150% of NPK recommendation. The results showed that the treatment of compost and NPK fertilizers gave no significant effect on tillers number clumb-1 and dry straw weight/m2 , but gave a significant effect on N, P, K and dry grain weight/m2. The combination of 5 tons of compost/ha and 150% of NPK recommendation can produce N-total, P-available level, K-available and dry grain weight per m2 respectively 0.35%, 13.79 ppm, 355, 21 ppm and 0.96 kg and significantly higher than the combination of 50% NPK recommendation and without compost, which were 0.26%, 8.21 ppm, 236.10 ppm and 0.69 kg respectively.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

Sign in / Sign up

Export Citation Format

Share Document