scholarly journals Design of Low Voltage Low Power High Gain Operational Transconductance Amplifier

2021 ◽  
Vol 7 (4) ◽  
pp. 103-110
Author(s):  
Rajesh Durgam ◽  
S. Tamil ◽  
Nikhil Raj
Keyword(s):  
Low Voltage ◽  
Cmos Technology ◽  
High Gain ◽  
Floating Gate ◽  
Operational Transconductance Amplifier ◽  
Linear Mode ◽  
Low Voltage Operation ◽  
Transconductance Amplifier ◽  
Amplifier Design ◽  
Self Cascode

In this paper, a high gain structure of operational transconductance amplifier is presented. For low voltage operation with improved frequency response bulk driven quasi-floating gate MOSFET is used at the input. Further for achieving high gain the modified self cascode structure is used at the output. Compared to conventional self cascode the modified self cascode structure used provides higher transconductance which helps in significant boosting of gain of the amplifier. The modification is achieved by employing quasi-floating gate transistor which helps in scaling of the threshold which as a result increases the drain-to-source voltage of linear mode transistor thus changing it to saturation. This change of mode boosts the effective transconductance of self cascode MOSFET. The proposed operational transconductance amplifier when compared to its conventional showed improvement in DC gain by 30dB and also the unity gain bandwidth increases by 6 fold. The MOS models used for amplifier design are of 0.18µm CMOS technology at supply of 0.5V.

scholarly journals Ultra-Low-Voltage Low-Power Bulk-Driven Quasi-Floating-Gate Operational Transconductance Amplifier

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Ziad Alsibai ◽  
Salma Bay Abo Dabbous
Keyword(s):  
Signal Processing ◽  
Power Consumption ◽  
Low Power ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Bias Current ◽  
Floating Gate ◽  
Operational Transconductance Amplifier ◽  
Transconductance Amplifier

A new ultra-low-voltage (LV) low-power (LP) bulk-driven quasi-floating-gate (BD-QFG) operational transconductance amplifier (OTA) is presented in this paper. The proposed circuit is designed using 0.18 μm CMOS technology. A supply voltage of ±0.3 V and a quiescent bias current of 5 μA are used. The PSpice simulation result shows that the power consumption of the proposed BD-QFG OTA is 13.4 μW. Thus, the circuit is suitable for low-power applications. In order to confirm that the proposed BD-QFG OTA can be used in analog signal processing, a BD-QFG OTA-based diodeless precision rectifier is designed as an example application. This rectifier employs only two BD-QFG OTAs and consumes only 26.8 μW.

scholarly journals A Fully-Integrated 180 nm CMOS 1.2 V Low-Dropout Regulator for Low-Power Portable Applications

Electronics ◽  
2021 ◽  
Vol 10 (17) ◽  
pp. 2108
Author(s):  
Jorge Pérez-Bailón ◽  
Belén Calvo ◽  
Nicolás Medrano
Keyword(s):  
Low Voltage ◽  
Low Cost ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
High Gain ◽  
Oxide Semiconductor ◽  
Fully Integrated ◽  
Low Voltage Operation ◽  
Error Amplifier ◽  
Ldo Regulator

This paper presents the design and postlayout simulation results of a capacitor-less low dropout (LDO) regulator fully integrated in a low-cost standard 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) technology which regulates the output voltage at 1.2 V from a 3.3 to 1.3 V battery over a –40 to 120°C temperature range. To meet with the constraints of system-on-chip (SoC) battery-operated devices, ultralow power (Iq = 8.6 µA) and minimum area consumption (0.109 mm2) are maintained, including a reference voltage Vref = 0.4 V. It uses a high-gain dynamically biased folded-based error amplifier topology optimized for low-voltage operation that achieves an enhanced regulation-fast transient performance trade-off.

Sub-Volt Fully Balanced Differential Difference Amplifier

2014 ◽  
Vol 24 (01) ◽  
pp. 1550005 ◽  
Author(s):  
Fabian Khateb ◽  
Montree Kumngern ◽  
Spyridon Vlassis ◽  
Costas Psychalinos ◽  
Tomasz Kulej
Keyword(s):  
Low Voltage ◽  
Input Voltage ◽  
Cmos Technology ◽  
Floating Gate ◽  
Voltage Range ◽  
State Variable ◽  
Low Voltage Operation ◽  
Differential Difference Amplifier ◽  
Simulation Results ◽  
State Variable Filter

This paper presents a new CMOS structure for a fully balanced differential difference amplifier (FB-DDA) designed to operate from a sub-volt supply. This structure employs the bulk-driven quasi-floating-gate (BD-QFG) technique to achieve the capability of an ultra-low voltage operation and an extended input voltage range. The proposed BD-QFG FB-DDA is suitable for ultra-low-voltage low-power applications. The circuit is designed with a single supply of 0.5 V and consumes only 357 nW of power. The proposed circuit was simulated in a 0.18-μm TSMC CMOS technology and the simulation results prove its functionality and attractive parameters. An application example of a state variable filter is also presented to confirm the usefulness of the proposed BD-QFG FB-DDA.

Low Power Operational Transconductance Amplifier (OTA) with Enhanced DC Gain and Slew-Rate

2013 ◽  
Vol 411-414 ◽  
pp. 1645-1648
Author(s):  
Xiao Zong Huang ◽  
Lun Cai Liu ◽  
Jian Gang Shi ◽  
Wen Gang Huang ◽  
Fan Liu ◽  
...  
Keyword(s):  
Low Voltage ◽  
Cmos Technology ◽  
Optimization Techniques ◽  
Current Mirror ◽  
Slew Rate ◽  
Operational Transconductance Amplifier ◽  
Theory Analysis ◽  
Transconductance Amplifier ◽  
Dc Gain ◽  
Simulation Results

This paper presents a low-voltage differential operational transconductance amplifier (OTA) with enhanced DC gain and slew-rate. Based on the current mirror OTA topology, the optimization techniques are discussed in this work. The proposed structure achieves enhanced DC gain, unit gain frequency (UGF) and slew-rate (SR) with adding four devices. The design of the OTA is described with theory analysis. The OTA operates at the power supply of 1.8V. Simulation results for 0.18μm standard CMOS technology show that the DC gain increases from 60.6dB to 65dB, the UGF is optimized from 2.5MHz to 4.3MHz, the SR is enhanced from 0.88 V/μs to 4.8 V/μs with close power consumption dramatically.

High Gain and High CMRR Two-Stage Folded Cascode OTA with Nested Miller Compensation

2015 ◽  
Vol 24 (04) ◽  
pp. 1550057 ◽  
Author(s):  
Meysam Akbari ◽  
Omid Hashemipour
Keyword(s):  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
High Gain ◽  
Open Loop ◽  
Two Stage ◽  
Miller Compensation ◽  
Transconductance Amplifier ◽  
Dc Gain ◽  
Folded Cascode

By using Gm-C compensation (GCC) technique, a two-stage recycling folded cascode (FC) operational transconductance amplifier (OTA) is designed. The proposed configuration consists of recycling structure, positive feedback and feed-forward compensation path. In comparison with the typical folded cascode CMOS Miller amplifier, this design has higher DC gain, unity-gain frequency (UGF), slew rate and common mode rejection ratio (CMRR). The presented OTA is simulated in 0.18-μm CMOS technology and the simulation results confirm the theoretical analyses. Finally, the proposed amplifier has a 111 dB open-loop DC gain, 20 MHz UGF and 145 dB CMRR @ 1.2 V supply voltage while the power consumption is 400 μW which makes it suitable for low-voltage applications.

scholarly journals Reliable Low Voltage Circuit Design Techniques

2017 ◽  
Vol 3 (4) ◽  
pp. 32
Author(s):  
P. John Paul ◽  
Raj N
Keyword(s):  
Circuit Design ◽  
Analog Circuits ◽  
Low Voltage ◽  
Floating Gate ◽  
Performance Parameters ◽  
Operational Transconductance Amplifier ◽  
Transconductance Amplifier ◽  
Signal Path ◽  
Simulation Results ◽  
Design Techniques

In this paper, non-conventional circuit design techniques has been reviewed. The techniques discussed are widely used for realizing low voltage low power analog circuits. The discussed techniques in this paper are: Bulk Driven, Floating and Quasi-floating Gate followed by operating of Bulk Driven MOSFET in Floating and Quasi-floating Gate mode. In all the approach, the threshold voltage restriction is removed or reduced from the input signal path thereby reducing the power consumption. However, the adverse effect lies is terms of reduced performance parameters of MOSFET compared to conventional gate driven MOSFET parameters as shown in this paper through simulation results. The comparative analysis of MOSFET parameters results in encouragement of two approaches: Quasi-floating Gate and Bulk Driven Quasi-floating Gate MOSFET. Each of these approaches has its advantage in specific domains. Further in this paper, an Operational Transconductance Amplifier is proposed which use the Bulk Driven Quasi-floating Gate MOSFET technique and the same is amplifier under similar conditions is also realized using Bulk Driven MOSFET so as to highlight the advantage of Bulk Driven  Quasi-floating Gate MOSFET over Bulk Driven MOSFET. All the performances metrics are achieved with the help of HSpice simulator using MOSFET models of 180nm technology provided by UMC.

Sign in / Sign up

Export Citation Format

Share Document