scholarly journals Pengujian Kinerja Panel Surya Pembangkit Listrik Tenaga Surya di PT Indonesia Power Unit Bisnis Pembangkitan Bali

Jurnal METTEK ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 105
Author(s):  
I Ketut Rizki Fibrina Firmandanu ◽  
I Gusti Bagus Wijaya Kusuma ◽  
I Wayan Bandem Adnyana

Pemanfaatan energi surya sangat berpotensi dimanfaatkan sebagai sumber energi alternatif. Energi surya merupakan energi terbarukan yang produktif sehingga melalui penelitian ini sangat erat kaitannya dengan program pemanfaatan sumber – sumber energi terbarukan untuk memasok kebutuhan energi. Penelitian telah dilaksanakan di PT Indonesia Power Unit Bisnis Pembangkitan Bali. Penelitian ini bertujuan untuk mengetahui efisiensi dan energi optimum yang dihasilkan oleh panel surya. Pengujian dilakukan dengan pengukuran intensitas cahaya, tegangan dan arus pada panel surya dengan pemasangan kemiringan sesuai pada atap Gedung A PT Indonesia Power Unit Bisnis Pembangkitan Bali. Hasil pengujian menunjukkan bahwa efisiensi panel surya maksimum di PLTS PT Indonesia Power terjadi pada bulan November sebesar 9,56% dan daya keluaran optimum yang dihasilkan sebesar 240 watt. Daya tersebut dicapai pada bulan November dan Desember pada setiap hari pukul 13.00 sampai 14.00 WITA. Utilization of solar energy potential is exploited as a source of alternative energy. Solar energy is a renewable energy that are productive so that through this research is closely associated with the program source – utilization of renewable energy sources to supply energy needs. Research has been carried out at PT Indonesia Power Generation Business Unit. The test is done by measuring the intensity of light, voltage and current on solar panel installation with the slope of the fit on the roof of the building with PT Indonesia Power Generation Business Unit of Bali. The results of testing shows that maximum efficiency solar panels in PLTS PT Indonesia Power Generation Business Unit of Bali occur in november as much as 9,56 % and power output optimum position produced as much as 240 watts .Power being achieved in november and december at all the appointed 13.00 until 14.00 WITA.

Author(s):  
Ayush Bansal

Abstract: Pure and environmentally friendly energy is of significant interest these days. It is one of the key enablements in achieving the Sustainable Development Goals (SDGs), accelerating social progress, and raising the standard of living. This work seeks broad insights into the Indian renewable energy framework, policy, approach, and socio-economic challenges. These include grid-independent and specific activities such as 'Utility-Scale Power Generation, Potential Multiple Geographies in India' and the Government of India's current achievements in advancing renewable energy production. Although much progress and progress has been made in the last decade of alternative energy maturation and expansion, improvements can be sought to increase the use of solar energy for conventional energy sources in India. Keywords: Solar Panels, Solar Energy, Renewable Energy, Sustainable Development Goals, power generation, cleaner fuels


2017 ◽  
Vol 6 (1) ◽  
pp. 1-12
Author(s):  
V. Saravanan ◽  
M. Aravindan ◽  
V. Balaji ◽  
M. Arumugam

Need for alternative energy sources to satisfy the rising demand in energy consumption elicited the research in the area of power converters/inverters. An increasing interest of using Z source inverter/converter in power generation involving renewable energy sources like wind and solar energy for both off grid and grid tied schemes were originated from 2003. This paper surveys the literature of Z source inverters/converter topologies that were developed over the years.


2021 ◽  
Vol 11 (13) ◽  
pp. 5907
Author(s):  
Valerii Havrysh ◽  
Antonina Kalinichenko ◽  
Anna Brzozowska ◽  
Jan Stebila

The European Union has set targets for renewable energy utilization. Poland is a member of the EU, and its authorities support an increase in renewable energy use. The background of this study is based on the role of renewable energy sources in improving energy security and mitigation of climate change. Agricultural waste is of a significant role in bioenergy. However, there is a lack of integrated methodology for the measurement of its potential. The possibility of developing an integrated evaluation methodology for renewable energy potential and its spatial distribution was assumed as the hypothesis. The novelty of this study is the integration of two renewable energy sources: crop residues and animal husbandry waste (for biogas). To determine agricultural waste energy potential, we took into account straw requirements for stock-raising and soil conservation. The total energy potential of agricultural waste was estimated at 279.94 PJ. It can cover up to 15% of national power generation. The spatial distribution of the agricultural residue energy potential was examined. This information can be used to predict appropriate locations for biomass-based power generation facilities. The potential reduction in carbon dioxide emissions ranges from 25.7 to 33.5 Mt per year.


2015 ◽  
Vol 6 (1) ◽  
pp. 11-17 ◽  
Author(s):  
G. Szabó ◽  
P. Enyedi ◽  
Gy. Szabó ◽  
I. Fazekas ◽  
T. Buday ◽  
...  

According to the challenge of the reduction of greenhouse gases, the structure of energy production should be revised and the increase of the ratio of alternative energy sources can be a possible solution. Redistribution of the energy production to the private houses is an alternative of large power stations at least in a partial manner. Especially, the utilization of solar energy represents a real possibility to exploit the natural resources in a sustainable way. In this study we attempted to survey the roofs of the buildings with an automatic method as the potential surfaces of placing solar panels. A LiDAR survey was carried out with 12 points/m2 density as the most up-to-date method of surveys and automatic data collection techniques. Our primary goal was to extract the buildings with special regard to the roofs in a 1 km2 study area, in Debrecen. The 3D point cloud generated by the LiDAR was processed with MicroStation TerraScan software, using semi-automatic algorithms. Slopes, aspects and annual solar radiation income of roof planes were determined in ArcGIS10 environment from the digital surface model. Results showed that, generally, the outcome can be regarded as a roof cadaster of the buildings with correct geometry. Calculated solar radiation values revealed those roof planes where the investment for photovoltaic solar panels can be feasible.


2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
T. Pimonenko ◽  
O. Lyulyov ◽  
N. Letunovska ◽  
O. Lytvynenko ◽  
A. Nazarenko

The article aims to study current trends in the use of solar energy in Ukraine and the world as one of the main directions of decarbonization of the national economy. The authors systematize the prospects, advantages and disadvantages of the development of renewable energy sources. They conducted a comparative analysis of the "efficiency" of solar energy in some countries and Ukraine. The authors determined that the leading position in terms of the share of energy consumed from renewable sources is occupied by countries with developed economies due to the availability of effective motivational mechanisms. From the experience of EU countries, the authors concluded that renewable energy sources form a prerequisite for obtaining additional socio-economic and environmental effects. In the presence of favorable market conditions, renewable energy sources can increase the level of energy security in the country and its energy independence. The article analyzes the legislation of Ukraine on stimulating the development of alternative energy. The authors proposed two opposed ways of further developing solar energy in Ukraine. In particular, the country can implement methods of using alternative energy, which developed countries have successfully implemented. Another area involves increasing research and innovation in implementing, using, maintaining, and utilizing energy-generating devices from alternative energy sources. Despite the polarity of the proposed directions for further development of renewable energy, in both cases, the state policy on attracting investment and promoting the use of energy from alternative energy sources is crucial. In addition, the authors noted the benefits for society from the development and implementation of alternative energy sources. The scaling up and promotion of energy production technologies from alternative sources can reduce carbon emissions, which has been an urgent problem globally.


2021 ◽  
Vol 5 (3) ◽  
pp. 56-61
Author(s):  
Ahmet Erhan AKAN

The decrease in fossil-based energy sources and increasing environmental problems increase the tendency to renewable energy sources day by day. The potential of renewable energy sources differs according to the region where the energy will be produced. For this reason, it is crucial to conduct a good feasibility study that deals with the selected systems from a technical and economic point of view before making an investment decision on energy conversion systems based on renewable energy sources. In this study, the most suitable equipment and capacities were investigated by examining the techno-economic analysis of a hybrid system created with wind-solar renewable energies for a detached house, which is considered off-grid, in a rural area of Tekirdağ province (40o58.7ı N, 27o30.7ı E). Investigations were carried out using the HOMER Pro (Hybrid Optimization Model for Electric Renewable) program. The wind and solar energy potential of Tekirdağ province were obtained from the NASA renewable energy resources database added to the HOMER Pro program. The daily electricity requirement of the sample house was chosen as 11.27 kWh, and the current peak electrical load was chosen as 2.39 kW. A wind turbine is connected to the AC busbars, solar collectors and battery group connected to the DC busbars, and a converter that converts energy between AC and DC busbars in the energy conversion system. In order to determine the optimum capacities of the system elements, 27486 different simulations were performed by HOMER Pro. The selection of the most suitable system among these was determined according to the lowest net present cost (NPC) value. In addition, the energy production capacities that will occur in the case of different wind speeds were also investigated. Accordingly, the system to be installed with a solar panel with a capacity of 6.25 kW, PV-MPPT with a capacity of 1 kW, 2 wind turbines with a capacity of 1 kW, 8 Lithium-ion batteries with a capacity of 6V-167 Ah, and a converter with a capacity of 2.5 kW has been determined will generate electrical energy of 5433 kWh per year. In addition, it has been determined that 61.8% of this produced energy will be obtained from solar energy and 38.2% from wind energy, and the simple payback period of the investment will be 14 years. It is thought that this study will provide valuable information to researchers and investors.


Processes ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 9 ◽  
Author(s):  
Nader Nader ◽  
Wael Al-Kouz ◽  
Sameer Al-Dahidi

There is no denial that renewable energy is considered to be the most cost-competitive source of clean power in many parts of the world. Saudi Arabia’s vision 2030 aims at achieving the best by using different sources of renewable energy such as solar energy, wind energy, and others. The use of solar energy in particular for power generation will decrease the dependency on oil, and thus, decrease the greenhouse gasses. Solar panels efficiency tends to decrease with the accumulation of dust on their surface. Thus, a cleaning process requires assigning and employing labor, which increases the cost of running as well as high cost of machinery. The current study focuses on assessing and designing a simple auto self-cleaning system in order to improve the efficiency of the solar panel. The results showed that for the Al-Khobar region, Eastern Province, Kingdom of Saudi Arabia, the efficiency of the solar panels after cleaning was increased from 6% to an average of 12% at nominal temperature of 27 °C. In addition, the average power output was increased by 35% during the day time. In addition, the normal efficiency of the solar panels before cooling was between 10% to 15% at 42 °C. After cooling, the temperature of solar cells decreased to 20 °C and the efficiency increased by 7%. Moreover, the output power was increased by 31% with maximum efficiency of 32% at noon time.


2015 ◽  
Vol 5 (1) ◽  
pp. 4 ◽  
Author(s):  
Clement Ehimika Ohireime Onime ◽  
James Uhomoibhi ◽  
Ermanno Pietrosemoli

It is becoming increasingly important to include information about power generation from renewable energy sources in the training of electrical engineers. Solar energy is arguably the most common renewable energy source in use today. Providing practical hands-on training on solar energy power generation today requires the use of photovoltaic panel devices which are used for transforming solar energy into electrical energy. In many developing countries, practical hands-on training on solar power generation is limited due to the cost of photovoltaic panel devices and so the training consists of theoretical and tutorial classes sometimes supported by remote and virtual laboratories. This paper presents an augmented virtuality tool where real-time information from a mobile device’s sensors is used directly within a virtual or computer generated environment. The tool provides a practical context for hands-on tutorial exercises on solar energy power generation.


2015 ◽  
Vol 26 (3) ◽  
pp. 105-110 ◽  
Author(s):  
Udochukwu B. Akuru ◽  
Ogbonnaya I. Okoro ◽  
Chibuike F. Maduko

The DESERTEC project, a European Union (EU) initiative to harness solar energy by means of Concentrated Solar Power (CSP) from Africa for use in Europe, shows the enormous potential that exists in alternative energy sources for the sub-region once there is political will. The Trans-Mediterranean Renewable Energy Corporation (TREC), a network of scientists and politicians who have taken it upon themselves to solve Europe’s energy problem using sun from Africa, conducted three studies which evaluated the potential of renewable energy resources in the Middle East and North Africa (MENA), the expected needs for water and power in EU-MENA between now and 2050 and issues relating to the construction of an electricity transmission grid connecting the EU and MENA (EU-MENA-Connection), with a formula to turn the North African desert sun into electricity and transport same to Europe. This paper harnesses the TREC fact-finding studies in order to estimate how much the same ideas can be applied in many other parts of the world, Nigeria in particular. Investigation reveals that this association exists with huge potentials for an energy-starved country like Nigeria in harnessing her abundant hot sun in the north, which could go a long way in meeting the energy needs in that part of the country and beyond. Other benefits include unlimited supplies of clean electricity, agricultural gains, and creation of new industries, new jobs and new sources of income.


2021 ◽  
Vol 17 (4) ◽  
Author(s):  
Eka Purwa Laksana ◽  
Yani Prabowo ◽  
Sujono Sujono ◽  
Rummi Sirait ◽  
Nifty Fath ◽  
...  

Indonesia is a tropical country located on the equator. The average intensity of solar radiation in Indonesia is 4.8 kWh/m2. This makes Indonesia a country with new and ren ewable energy potential, one of which is solar panel technology. The first step that must be done in the process of installing solar panels in a place is to analyze the potential of solar energy. In this study, an analysis of the potential of solar energy as a new renewable energy source has been carried out at Budi Luhur University, North Petukangan, South Jakarta. Based on the research results, the maximum photovoltaic efficiency that can be achieved is 21.45%. During the day, the efficiency of the solar panels increases along with the ncrease in the value of the voltage obtained. However, the higher the panel temperature, the lower the efficiency of the solar panel. Therefore, a cooling system is needed to anticipate this.


Sign in / Sign up

Export Citation Format

Share Document