Rating investment projects of user-defined duration under regular redemption schedule: A new approach

2019 ◽  
Vol 25 (10) ◽  
pp. 2414-2432
Author(s):  
P.N. Brusov ◽  
◽  
T.V. Filatova ◽  
N.P. Orekhova ◽  
V.L. Kulik ◽  
...  
Keyword(s):  
New Approach ◽  
Investment Projects

Turning capital project uncertainty into positive certainty by better defining manageable risk

2011 ◽  
Vol 51 (1) ◽  
pp. 423 ◽  
Author(s):  
Robert Gray
Keyword(s):  
Risk Management ◽  
Oil And Gas ◽  
Project Managers ◽  
Project Investment ◽  
New Approach ◽  
Investment Projects ◽  
Project Outcomes ◽  
Management Application ◽  
Management Roles ◽  
Complex Project

We are all stakeholders in the development of better practices to address the challenges presented by the opportunities and responsibilities that exist in our industry. Navigating the path between uncertainty and positive project outcomes can hopefully help to generate informed decisions as well as a thorough consideration of all the relevant risks. Many risk management roles have, however, tended to develop into compliance-style functions. This paper tackles the inconsistency of risk management application via a new approach, encompassing three elements: taking a new look at some fundamental concepts; making subsequent adaptations to some familiar tools; and applying these ideas to oil and gas investment projects. At the conclusion of this paper, project managers, sponsors and boards should have a new appreciation for how the industry might further improve its performance in tackling uncertainty on complex project investment decisions.

Evaluation of Investment Projects Effectiveness by the Criteria of Their Quality

2016 ◽  
Vol 5 (4) ◽  
pp. 20-25
Author(s):  
Зорина ◽  
A. Zorina
Keyword(s):  
Future Development ◽  
Investment Project ◽  
Comprehensive Analysis ◽  
Industrial System ◽  
New Approach ◽  
Investment Projects ◽  
Scarce Resources ◽  
Advantages And Disadvantages ◽  
Managerial Decisions

Under conditions of scarce resources the firm is facing challenge of selection most effective investment projects. In order to make reasonable managerial decisions comprehensive analysis is needed that will show value for investor as well as influence of investments on future development and competitive performance of the firm. The article provides an overview of existing methods of evaluating the effectiveness of investment projects, that allowed to indicate and classify their main advantages and disadvantages. Author presents new approach to evaluation of investment projects effectiveness by the criteria of quality of the industrial system, which forms the basis of investment project. It is shown that its usage helps to essentially lower disadvantages of existing methods.

The O–C diagrams of minor planets − a new approach to modelling the rotation

1999 ◽  
Vol 173 ◽  
pp. 185-188
Author(s):  
Gy. Szabó ◽  
K. Sárneczky ◽  
L.L. Kiss
Keyword(s):  
Error Analysis ◽  
Time Dependence ◽  
Theoretical Work ◽  
Minor Planet ◽  
Minor Planets ◽  
New Approach ◽  
Preliminary Results ◽  
Ccd Observations

AbstractA widely used tool in studying quasi-monoperiodic processes is the O–C diagram. This paper deals with the application of this diagram in minor planet studies. The main difference between our approach and the classical O–C diagram is that we transform the epoch (=time) dependence into the geocentric longitude domain. We outline a rotation modelling using this modified O–C and illustrate the abilities with detailed error analysis. The primary assumption, that the monotonity and the shape of this diagram is (almost) independent of the geometry of the asteroids is discussed and tested. The monotonity enables an unambiguous distinction between the prograde and retrograde rotation, thus the four-fold (or in some cases the two-fold) ambiguities can be avoided. This turned out to be the main advantage of the O–C examination. As an extension to the theoretical work, we present some preliminary results on 1727 Mette based on new CCD observations.

A New Approach to the Demonstration of Oxidase-Localization Using Tannic Acid Or Catechin

1973 ◽  
Vol 31 ◽  
pp. 698-699
Author(s):  
V. Mizuhira ◽  
Y. Futaesaku
Keyword(s):  
Cross Section ◽  
Tannic Acid ◽  
Elastic Fiber ◽  
The Other ◽  
New Approach ◽  
Tissue Block ◽  
Active Reaction ◽  
The Cross

Previously we reported that tannic acid is a very effective fixative for proteins including polypeptides. Especially, in the cross section of microtubules, thirteen submits in A-tubule and eleven in B-tubule could be observed very clearly. An elastic fiber could be demonstrated very clearly, as an electron opaque, homogeneous fiber. However, tannic acid did not penetrate into the deep portion of the tissue-block. So we tried Catechin. This shows almost the same chemical natures as that of proteins, as tannic acid. Moreover, we thought that catechin should have two active-reaction sites, one is phenol,and the other is catechole. Catechole site should react with osmium, to make Os- black. Phenol-site should react with peroxidase existing perhydroxide.

Processing Immunoperoxidase Labeled Cell Monolayers and Cryostat Sesctions For Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 714-715
Author(s):  
K. Chien ◽  
R. Van de Velde ◽  
I.P. Shintaku ◽  
A.F. Sassoon
Keyword(s):  
Cell Monolayer ◽  
Cell Types ◽  
Surface Antigens ◽  
Immunoperoxidase Method ◽  
Reaction Step ◽  
Hot Plate ◽  
Air Drying ◽  
New Approach ◽  
Cell Monolayers ◽  
Glass Slides

Immunoelectron microscopy of neoplastic lymphoma cells is valuable for precise localization of surface antigens and identification of cell types. We have developed a new approach in which the immunohistochemical staining can be evaluated prior to embedding for EM and desired area subsequently selected for ultrathin sectioning.A freshly prepared lymphoma cell suspension is spun onto polylysine hydrobromide- coated glass slides by cytocentrifugation and immediately fixed without air drying in polylysine paraformaldehyde (PLP) fixative. After rinsing in PBS, slides are stained by a 3-step immunoperoxidase method. Cell monolayer is then fixed in buffered 3% glutaraldehyde prior to DAB reaction. After the DAB reaction step, wet monolayers can be examined under LM for presence of brown reaction product and selected monolayers then processed by routine methods for EM and embedded with the Chien Re-embedding Mold. After the polymerization, the epoxy blocks are easily separated from the glass slides by heatingon a 100°C hot plate for 20 seconds.

TEM study of a biofilm on copper corrosion

1996 ◽  
Vol 54 ◽  
pp. 220-221
Author(s):  
W. A. Chiou ◽  
N. Kohyama ◽  
B. Little ◽  
P. Wagner ◽  
M. Meshii
Keyword(s):  
Marine Bacterium ◽  
Culture Medium ◽  
Copper Alloys ◽  
Pure Copper ◽  
Localized Corrosion ◽  
Natural Seawater ◽  
Copper Corrosion ◽  
New Approach ◽  
The Past ◽  
Copper Tolerant

The corrosion of copper and copper alloys in a marine environment is of great concern because of their widespread use in heat exchangers and steam condensers in which natural seawater is the coolant. It has become increasingly evident that microorganisms play an important role in the corrosion of a number of metals and alloys under a variety of environments. For the past 15 years the use of SEM has proven to be useful in studying biofilms and spatial relationships between bacteria and localized corrosion of metals. Little information, however, has been obtained using TEM capitalizing on its higher spacial resolution and the transmission observation of interfaces. The research presented herein is the first step of this new approach in studying the corrosion with biological influence in pure copper.Commercially produced copper (Cu, 99%) foils of approximately 120 μm thick exposed to a copper-tolerant marine bacterium, Oceanospirillum, and an abiotic culture medium were subsampled (1 cm × 1 cm) for this study along with unexposed control samples.

High resolution at low voltage: A new approach

1989 ◽  
Vol 47 ◽  
pp. 76-77
Author(s):  
Arthur V. Jones
Keyword(s):  
Low Voltage ◽  
Emission Sources ◽  
New Approach ◽  
Design Concepts ◽  
Probe Diameter ◽  
Low Voltage Operation ◽  
Sufficient Intensity ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Immersion Type

With the introduction of field-emission sources and “immersion-type” objective lenses, the resolution obtainable with modern scanning electron microscopes is approaching that obtainable in STEM and TEM-but only with specific types of specimens. Bulk specimens still suffer from the restrictions imposed by internal scattering and the need to be conducting. Advances in coating techniques have largely overcome these problems but for a sizeable body of specimens, the restrictions imposed by coating are unacceptable.For such specimens, low voltage operation, with its low beam penetration and freedom from charging artifacts, is the method of choice.Unfortunately the technical dificulties in producing an electron beam sufficiently small and of sufficient intensity are considerably greater at low beam energies — so much so that a radical reevaluation of convential design concepts is needed.The probe diameter is usually given by

Sign in / Sign up

Export Citation Format

Share Document