scholarly journals Effects of Ultraviolet Intensity and Initial Thickness on Normal Force of Acrylic Ultraviolet Curable Resin

2020 ◽  
Vol 33 (6) ◽  
pp. 609-613
Author(s):  
Kentaro Taki ◽  
Keigo Sawa
Keyword(s):  
Normal Force ◽  
Initial Thickness ◽  
Ultraviolet Curable

Rheological characterization of tack and viscoelasticity of compositions of crepe coating used in the Yankee dryer

TAPPI Journal ◽  
2019 ◽  
Vol 18 (11) ◽  
pp. 641-649
Author(s):  
JOSHUA OMAMBALA ◽  
CARL MCINTYRE
Keyword(s):  
Normal Force ◽  
Weight Ratio ◽  
Good Combination ◽  
Rheological Characterization ◽  
Nonlinear Viscoelastic ◽  
Coating Composition ◽  
Linear And Nonlinear ◽  
Work Done ◽  
Tissue Production

The vast majority of tissue production uses creping to achieve the required set of properties on the base sheet. The Yankee coating helps to develop the desired crepe that in turn determines properties such as bulk and softness. The adhesion of the sheet to the Yankee surface is a very important characteristic to consider in achieving the desired crepe. The coating mix usually consists of the adhesive, modifier, and release. A good combination of these components is essential to achieving the desired properties of the tissue or towel, which often are determined by trials on the machine that can be time consuming and lead to costly rejects. In this paper, five compositions of an industrial Yankee coating adhesive, modifier, and release were examined rheologically. The weight ratio of the adhesive was kept constant at 30% in all five compositions and the modifier and release ratios were varied. The normal force and work done by the different compositions have been shown at various temperatures simulating that of the Yankee surface, and the oscillatory test was carried out to explain the linear and nonlinear viscoelastic characteristic of the optimal coating composition.

An ultraviolet‐curable, core–shell vaccine formed via phase separation

2019 ◽  
Vol 107 (10) ◽  
pp. 2160-2173
Author(s):  
Jihui Lee ◽  
Shreedevi Arun Kumar ◽  
Whitney N. Souery ◽  
Taylor Hinsdale ◽  
Kristen C. Maitland ◽  
...  
Keyword(s):  
Phase Separation ◽  
Core Shell ◽  
Ultraviolet Curable

scholarly journals Comparative Study of PVDF Sheets and Their Sensitivity to Mechanical Vibrations: The Role of Dimensions, Molecular Weight, Stretching and Poling

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1637
Author(s):  
Miroslav Mrlík ◽  
Josef Osička ◽  
Martin Cvek ◽  
Markéta Ilčíková ◽  
Peter Srnec ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Comparative Study ◽  
Vinylidene Fluoride ◽  
Initial Thickness ◽  
Complementary Method ◽  
Β Phase ◽  
Vibration Sensing ◽  
Poly Vinylidene Fluoride ◽  
Processing Techniques ◽  
The Comparative Study

This paper is focused on the comparative study of the vibration sensing capabilities of poly(vinylidene fluoride) (PVDF) sheets. The main parameters such as molecular weight, initial sample thickness, stretching and poling were systematically applied, and their impact on sensing behavior was examined. The mechanical properties of prepared sheets were investigated via tensile testing on the samples with various initial thicknesses. The transformation of the α-phase to the electro-active β-phase was analyzed using FTIR after applying stretching and poling procedures as crucial post-processing techniques. As a complementary method, the XRD was applied, and it confirmed the crystallinity data resulting from the FTIR analysis. The highest degree of phase transformation was found in the PVDF sheet with a moderate molecular weight (Mw of 275 kDa) after being subjected to the highest axial elongation (500%); in this case, the β-phase content reached approximately 90%. Finally, the vibration sensing capability was systematically determined, and all the mentioned processing/molecular parameters were taken into consideration. The whole range of the elongations (from 50 to 500%) applied on the PVDF sheets with an Mw of 180 and 275 kDa and an initial thickness of 0.5 mm appeared to be sufficient for vibration sensing purposes, showing a d33 piezoelectric charge coefficient from 7 pC N−1 to 9.9 pC N−1. In terms of the d33, the PVDF sheets were suitable regardless of their Mw only after applying the elongation of 500%. Among all the investigated samples, those with an initial thickness of 1.0 mm did not seem to be suitable for vibration sensing purposes.

scholarly journals Effect of Water-Based Nanolubricants in Ultrasonic Vibration Assisted Grinding

2018 ◽  
Vol 2 (4) ◽  
pp. 80 ◽  
Author(s):  
Mir Molaie ◽  
Ali Zahedi ◽  
Javad Akbari
Keyword(s):  
Surface Roughness ◽  
Specific Energy ◽  
Material Removal ◽  
Normal Force ◽  
Tangential Force ◽  
Process Efficiency ◽  
Multiwall Carbon Nanotube ◽  
Ultrasonic Vibrations ◽  
Mql Grinding ◽  
Water Based

Currently, because of stricter environmental standards and highly competitive markets, machining operations, as the main part of the manufacturing cycle, need to be rigorously optimized. In order to simultaneously maximize the production quality and minimize the environmental issues related to the grinding process, this research study evaluates the performance of minimum quantity lubrication (MQL) grinding using water-based nanofluids in the presence of horizontal ultrasonic vibrations (UV). In spite of the positive impacts of MQL using nanofluids and UV which are extensively reported in the literature, there is only a handful of studies on concurrent utilization of these two techniques. To this end, for this paper, five kinds of water-based nanofluids including multiwall carbon nanotube (MWCNT), graphite, Al2O3, graphene oxide (GO) nanoparticles, and hybrid Al2O3/graphite were employed as MQL coolants, and the workpiece was oscillated along the feed direction with 21.9 kHz frequency and 10 µm amplitude. Machining forces, specific energy, and surface quality were measured for determining the process efficiency. As specified by experimental results, the variation in the material removal nature made by ultrasonic vibrations resulted in a drastic reduction of the grinding normal force and surface roughness. In addition, the type of nanoparticles dispersed in water had a strong effect on the grinding tangential force. Hybrid Al2O3/graphite nanofluid through two different kinds of lubrication mechanisms—third body and slider layers—generated better lubrication than the other coolants, thereby having the lowest grinding forces and specific energy (40.13 J/mm3). It was also found that chemically exfoliating the graphene layers via oxidation and then purification prior to dispersion in water promoted their effectiveness. In conclusion, UV assisted MQL grinding increases operation efficiency by facilitating the material removal and reducing the use of coolants, frictional losses, and energy consumption in the grinding zone. Improvements up to 52%, 47%, and 61%, respectively, can be achieved in grinding normal force, specific energy, and surface roughness compared with conventional dry grinding.

scholarly journals Fretting Wear Behavior of Three Kinds of Rubbers under Sphere-On-Flat Contact

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2153
Author(s):  
Tengfei Zhang ◽  
Jie Su ◽  
Yuanjie Shu ◽  
Fei Shen ◽  
Liaoliang Ke
Keyword(s):  
Normal Force ◽  
Wear Behavior ◽  
Displacement Amplitude ◽  
Fretting Wear ◽  
Butadiene Rubber ◽  
Force Frequency ◽  
Sealing Performance ◽  
Rubber Surface ◽  
Sealing Materials ◽  
Flat Contact

Rubbers are widely used in various fields as the important sealing materials, such as window seal, door seal, valve, pump seal, etc. The fretting wear behavior of rubbers has an important effect on their sealing performance. This paper presents an experimental study on the fretting wear behavior of rubbers against the steel ball under air conditions (room temperature at 20 ± 2 °C and humidity at 40%). Three kinds of rubbers, including EPDM (ethylene propylene diene monomer), FPM (fluororubber), and NBR (nitrile–butadiene rubber), are considered in experiments. The sphere-on-flat contact pattern is used as the contact model. The influences of the displacement amplitude, normal force, frequency, and rubber hardness on the fretting wear behavior are discussed in detail. White light profiler and scanning electron microscope (SEM) are used to analyze the wear mechanism of the rubber surface. The fretting wear performances of three rubbers are compared by considering the effect of the displacement amplitude, normal force, frequency, and rubber hardness. The results show that NBR has the most stable friction coefficient and the best wear resistance among the three rubbers.

scholarly journals Long-term stability in γ-CsPbI3 perovskite via an ultraviolet-curable polymer network

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Nam-Kwang Cho ◽  
Hyun-Jae Na ◽  
Jeeyoung Yoo ◽  
Youn Sang Kim
Keyword(s):  
Polymer Network ◽  
Lone Pair ◽  
Ambient Conditions ◽  
Absorption Properties ◽  
Term Stability ◽  
Long Term Stability ◽  
Ultraviolet Curable ◽  
Oxygen Lone Pair ◽  
Lone Pair Electrons

AbstractBlack-colored (α, γ-phase) CsPbI3 perovskites have a small bandgap and excellent absorption properties in the visible light regime, making them attractive for solar cells. However, their long-term stability in ambient conditions is limited. Here, we demonstrate a strategy to improve structural and electrical long-term stability in γ-CsPbI3 by the use of an ultraviolet-curable polyethylene glycol dimethacrylate (PEGDMA) polymer network. Oxygen lone pair electrons from the PEGDMA are found to capture Cs+ and Pb2+ cations, improving crystal growth of γ-CsPbI3 around PEGDMA. In addition, the PEGDMA polymer network strongly contributes to maintaining the black phase of γ-CsPbI3 for more than 35 days in air, and an optimized perovskite film retained ~90% of its initial electrical properties under red, green, and blue light irradiation.

Sign in / Sign up

Export Citation Format

Share Document