scholarly journals Biocompatibility of Styrene-butadiene Copolymer-modified Calcium Phosphate and Mineral Trioxide Aggregate

2020 ◽  
Vol 10 (2) ◽  
pp. 53-59
Author(s):  
Hala B. Kaka ◽  
Raid F. Salman
Keyword(s):  
Calcium Phosphate ◽  
Subcutaneous Tissue ◽  
Mineral Trioxide Aggregate ◽  
Endodontic Treatment ◽  
Filling Material ◽  
Root Canal Filling ◽  
Significant Difference ◽  
Histologic Evaluation ◽  
New Formulation ◽  
Styrene Butadiene

The biocompatibility of root canal filling material is one of the basic conditions for a successful endodontic treatment and healing of the periodontium. This study was aimed to evaluate the biocompatibility of calcium phosphate cement modified with the styrene-butadiene copolymer-modified calcium phosphate (mCPC) by its implantation in the subcutaneous tissue of rabbit. Fifteen female rabbits of comparable weight were used in this study, each one had received three different tubes; one containing mCPC, the other with mineral trioxide aggregate Fillapex, and an empty control tube on the subcutaneous tissue of thighs. After a definite time (3, 7, and 14 days), the tissues around the tubes were collected, fixed, and processed for histologic evaluation. A histopathological specialist measured the intensity of inflammation. Kruskal–Wallis test was used to analyze the data. The results showed a significant difference with mCPC group in different periods, there was a high intensity of inflammation at the beginning, then it fell, and sustained as mild inflammation. One can conclude that the new formulation of CPC considered biocompatible, which rises the success rate of endodontic treatment.

Injectable calcium phosphate and styrene–butadiene polymer-based root canal filling material

2021 ◽  
Vol 15 (1) ◽  
pp. 19-26
Author(s):  
Hala B. Kaka ◽  
Raid F. Salman
Keyword(s):  
Calcium Phosphate ◽  
Root Canal ◽  
Setting Time ◽  
Molar Ratio ◽  
Styrene Butadiene Rubber ◽  
Filling Material ◽  
Butadiene Rubber ◽  
Root Canal Filling ◽  
Phosphate Powder ◽  
Styrene Butadiene

Abstract Background Three-dimensional obturation of the root canal system is mandatory for a successful root canal treatment. Using a filling material with optimal properties may enable the root canal to be sealed well and therefore obtain the desired obturation. Objective To develop a new injectable paste endodontic filling material using calcium phosphate powder and a styrene–butadiene emulsion polymer. Methods The powder phase comprised an equivalent molar ratio of tetracalcium phosphate, anhydrous dicalcium phosphate, bismuth oxide, and calcium chloride. The liquid phase comprised a styrene–butadiene rubber emulsion in distilled water. The powder and the liquid were mixed to achieve a paste consistency. The paste was subjected to various tests including flow, setting time, dimensional change, solubility, and radiopacity to indicate its suitability as a root canal filling material. All these tests were conducted according to the American National Standards Institute–American Dental Association for endodontic sealing materials. After passing these tests, the paste was submitted to an injectability test. Results The material showed acceptable flowability with 19.1 ± 1.3 min setting time and 0.61 ± 0.16% shrinkage after 30 days of storage. We found the highest solubility at 24 h (6.62 ± 0.58%), then the solubility decreased to 1.09 ± 0.08% within 3 days. The material was more radiopaque than a 3 mm step on an aluminum wedge. Furthermore, the material showed good injectability of 93.67 ± 1.80%. Conclusions The calcium phosphate powder in styrene–butadiene emulsion met basic requirements for a root canal filling material with promising properties.

Injectable calcium phosphate and styrene–butadiene polymer-based root canal filling material

2021 ◽  
Vol 15 (1) ◽  
pp. 19-26
Author(s):  
Hala B. Kaka ◽  
Raid F. Salman
Keyword(s):  
Calcium Phosphate ◽  
Root Canal ◽  
Setting Time ◽  
Molar Ratio ◽  
Styrene Butadiene Rubber ◽  
Filling Material ◽  
Butadiene Rubber ◽  
Root Canal Filling ◽  
Phosphate Powder ◽  
Styrene Butadiene

Abstract Background Three-dimensional obturation of the root canal system is mandatory for a successful root canal treatment. Using a filling material with optimal properties may enable the root canal to be sealed well and therefore obtain the desired obturation. Objective To develop a new injectable paste endodontic filling material using calcium phosphate powder and a styrene–butadiene emulsion polymer. Methods The powder phase comprised an equivalent molar ratio of tetracalcium phosphate, anhydrous dicalcium phosphate, bismuth oxide, and calcium chloride. The liquid phase comprised a styrene–butadiene rubber emulsion in distilled water. The powder and the liquid were mixed to achieve a paste consistency. The paste was subjected to various tests including flow, setting time, dimensional change, solubility, and radiopacity to indicate its suitability as a root canal filling material. All these tests were conducted according to the American National Standards Institute–American Dental Association for endodontic sealing materials. After passing these tests, the paste was submitted to an injectability test. Results The material showed acceptable flowability with 19.1 ± 1.3 min setting time and 0.61 ± 0.16% shrinkage after 30 days of storage. We found the highest solubility at 24 h (6.62 ± 0.58%), then the solubility decreased to 1.09 ± 0.08% within 3 days. The material was more radiopaque than a 3 mm step on an aluminum wedge. Furthermore, the material showed good injectability of 93.67 ± 1.80%. Conclusions The calcium phosphate powder in styrene–butadiene emulsion met basic requirements for a root canal filling material with promising properties.

scholarly journals Healing Process Following Application of Set or Fresh Mineral Trioxide Aggregate as a Root-End Filling Material

2011 ◽  
Vol 05 (01) ◽  
pp. 019-023 ◽  
Author(s):  
Mehdi Habibi ◽  
Jamileh Ghoddusi ◽  
Ataollah Habibi ◽  
Nooshin Mohtasham
Keyword(s):  
Healing Process ◽  
Mineral Trioxide Aggregate ◽  
Histological Evaluation ◽  
Filling Material ◽  
Chi Square ◽  
Unsuccessful Attempt ◽  
Gutta Percha ◽  
Significant Difference ◽  
Chronic Abscess ◽  
The Difference

ABSTRACTObjectives: An unsuccessful attempt to reach the apical area or to place the retrograde material is a major difficulty in periradicular surgery. The aim of this study was to compare the histological evaluation of the healing process following an orthograde versus a retrograde application of mineral trioxide aggregate (MTA) as a root-end filling material during apical surgery on cats’ teeth in order to find out whether orthograde placement of MTA before surgery can be used instead of retrograde placement during surgery. Methods: In this experimental study, 24 canine teeth in 12 mature and healthy cats were filled with either MTA or gutta-percha in an orthograde manner. Two weeks later, the teeth with MTA were surgically exposed and resected to the set-MTA within the canals. The teeth previously filled by gutta-percha were also surgically exposed, and retrograde cavities were prepared at the root ends and filled with fresh-MTA. After 8 weeks, the animals were euthanized by vital perfusion. Six-micron histological slices were prepared from samples, stained by Hematoxylin & Eosin, and histologically studied by means of a light microscope. The collected data was analyzed by the Chi-square and the T-test. Results: One of the samples in the fresh-MTA group was omitted during processing because of inappropriate sectioning. In the set-MTA group, 5 out of 12 showed chronic abscess, while in the fresh-MTA group, 2 out of 11 were discovered to have chronic abscess; however, no significant difference was observed (P>.05). Hard tissue healing (cementum, bone, cementum + bone formation) in the set-MTA and fresh-MTA groups were 7 out of 12 and 9 out of 11, respectively. While healing seemed more likely to occur in the fresh-MTA group, the difference was statistically insignificant (P>.05). The magnitude of bone, cementum, or bone and cementum formation showed slight differences between the two groups; however, the figures failed to show any marked differences (P>.05). Conclusions: Orthograde placement of MTA could be used as an obturation material before surgery. In this way, after root-end resection, there would be no need for root-end preparation and filling procedures. (Eur J Dent 2011;5:19-23)

Mineral trioxide aggregate as a root canal filling material in reimplanted teeth. Microscopic analysis in monkeys

2007 ◽  
Vol 23 (5) ◽  
pp. 265-272 ◽  
Author(s):  
Sônia Regina Panzarini ◽  
Roberto Holland ◽  
Valdir de Souza ◽  
Wilson Roberto Poi ◽  
Celso Koogi Sonoda ◽  
...  
Keyword(s):  
Root Canal ◽  
Mineral Trioxide Aggregate ◽  
Microscopic Analysis ◽  
Filling Material ◽  
Root Canal Filling

scholarly journals Comparison of apical sealing ability of resected mineral trioxide aggregate, gutta-percha and a resin-based root canal filling material (resilon)

2011 ◽  
Vol 10 (51) ◽  
pp. 10516-10519
Author(s):  
Froughreyhani Mohammad ◽  
Salem Milani Amin ◽  
Rahimi Saeed ◽  
Shakouie Sahar ◽  
Fateh Somaieh
Keyword(s):  
Root Canal ◽  
Mineral Trioxide Aggregate ◽  
Filling Material ◽  
Root Canal Filling ◽  
Gutta Percha ◽  
Sealing Ability

scholarly journals Current trends in technological armamentarium and treatment among Brazilian endodontists

2017 ◽  
Vol 16 ◽  
pp. 1-10
Author(s):  
Ana Cristina Garcia Ferreira ◽  
Marcos Frozoni ◽  
Maíra Prado ◽  
Brenda Gomes ◽  
Fernanda Signoretti ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Digital Radiography ◽  
New Technologies ◽  
Continuous Wave ◽  
Endodontic Treatment ◽  
Filling Material ◽  
Root Canal Filling ◽  
Rubber Dam ◽  
Current Trends ◽  
Temporary Filling

Aim: To determine the current trends in technological armamentarium and endodontic treatment among Brazilian endodontists. Methods: A total of 279 endodontists answered a web-based survey questionnaire about their region of activity in Brazil and years as a specialist, average number of endodontic cases treated per month, number of visits to complete the treatment, use of rubber dam for isolation, type of irrigant, obturation technique and device used for this purpose, temporary filling materials, and greater difficulty encountered during treatment and technological armamentarium. A descriptive analysis, expressed in terms of frequency and percentage, was performed and the data were correlated using the chi-square test (p0.05). Results: Most of the respondents had up to 10 years as specialists. More than 50% of endodontists preferred to complete the endodontic treatment in a single visit. Ninety-nine percent of endodontists used rubber dam for isolation. NaOCl was the most widely used irrigant. Most of the respondents associated different techniques for root canal filling. Lateral condensation and Continuous wave of condensation were the isolated technique most reported. Filling devices (thermocompactors) were used by 53% of endodontists. Glass ionomer was the preferred temporary filling material. The answers for the use of technological armamentarium revealing that 94% of endodontists used an apex locator; 67.38% utilized magnification (loupe: 23.66%; microscope: 35.48%; microscope and loupe: 8.24%); 58% reported to digital radiography; and 47.31% used computed tomography as a complementary tool. About mechanized instrumentation, 44.44% endodontists employed rotary and reciprocating files. The difficulties encountered during endodontic treatment were classified as preparation > access > obturation > anesthesia > isolation. Conclusions: Most endodontists have implemented new technologies, such as mechanical instrumentation, apex locators, magnification, digital radiography, computed tomography, ultrasound, and obturation tools, in their clinical practice.

scholarly journals Impacts of contracted endodontic cavities compared to traditional endodontic cavities in premolars

2020 ◽  
Author(s):  
Xia Juan ◽  
Wang weidong ◽  
Li Zhengmao ◽  
Lin Bingpeng ◽  
Zhang Qian ◽  
...  
Keyword(s):  
Root Canal ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Filling Material ◽  
Root Canal Filling ◽  
Surface Areas ◽  
Significant Difference ◽  
3D Printed ◽  
Post Hoc

Abstract Background: This study aims to compare the percentage of dentin removed, instrumentation efficacy, root canal filling and load at fracture between contracted endodontic cavities, and traditional endodontic cavities on root canal therapy in premolars. Methods: Forty extracted intact human first premolars were imaged with micro-CT and randomly assigned to the contracted endodontic cavity (CEC) or traditional endodontic cavity (TEC) groups. CEC was prepared with the aid of a 3D-printed template, canals were prepared with a 0.04 taper M-Two rotary instrument, and cavities were restored with resin. Specimens were loaded to fracture in an Instron Universal Testing Machine after a fatigue phase. The data were analyzed by the independent samples T test and Mann-Whitney U test, appropriate post hoc tests. Results: In the premolars tested in vitro, the percentage of dentin removed in the premolars with two dental roots in the CEC group (3.85% ± 0.42%) was significantly smaller (P < 0.05) than in the TEC group (4.94% ± 0.5%). The untouched canal wall (UCW) after instrumentation for TECs (16.43% ± 6.56%) was significantly lower (P< .05) than the UCW (24.42% ± 9.19%) for CECs in single-rooted premolars. No significant differences were observed in the increased canal volume and surface areas in premolars between the TEC and CEC groups (P > 0.05). CECs conserved coronal dentin in premolars with two dental roots but no impact on the instrument efficacy. There were no differences between the CEC groups and the TEC groups in the percentage of filling material and voids (P > 0.05). In addition, the mean load at failure of premolars did not significantly differ between the CEC and TEC groups and there was no significant difference in the type of fracture (P > 0.05). Conclusion: The results of this study suggest that CEC could not improve the fracture resistance of the endodontically treated premolars. The instrumentation efficacy and the percentage of filling material did not significantly differ between CECs and TECs in premolars. Keywords: 3D-printed template, contracted endodontic cavities, instrumentation efficacy, root canal filling, fracture resistance

Influence of CBCT-based volumetric distortion and beam hardening artefacts on the assessment of root canal filling quality in isthmus-containing molars

2021 ◽  
pp. 20200503
Author(s):  
Clarissa Teles Rodrigues ◽  
Reinhilde Jacobs ◽  
Karla Faria Vasconcelos ◽  
Paul Lambrechts ◽  
Izabel Regina Fisher Rubira-Bullen ◽  
...  
Keyword(s):  
Cone Beam Ct ◽  
Wilcoxon Test ◽  
Reference Image ◽  
Filling Material ◽  
Beam Hardening ◽  
Root Canal Filling ◽  
Voxel Size ◽  
Root Canals ◽  
Significant Difference ◽  
Diagnostic Values

Objectives: To evaluate the influence of artefacts in cone beam CT (CBCT) images of filled root canals in isthmus-containing molars. Methods: 10 teeth presenting canals with an isthmus were instrumented and filled with a thermoplasticised obturation technique. The teeth were scanned using a micro-CT device and two CBCT devices: 3D Accuitomo 170 (ACC) and NewTom VGi evo (NT), with different acquisition protocols: larger and smaller voxel size. Three examiners assessed the CBCT images for: (1) detection of filling voids; (2) assessment of under- or overestimation of the filling material and (3) resemblance of CBCT images to the reference standard. Analyses of Task 1 yielded accuracy, sensitivity and specificity for detection of filling voids. For tasks 2 and 3, statistical analysis was performed using Wilcoxon test. The level of significance was set at p < .05. Results: For Task 1, ACC showed higher sensitivity, whereas NT presented higher specificity. No significant difference was found between the protocols in ACC, however, for NT, differences between protocols were significant for all diagnostic values. In Task 2, visualisation of the filling was overestimated for NT, while for ACC, underestimation was observed. For Task 3, images with smaller voxel size were more similar to the reference image, for both CBCT devices. Conclusions: Different artefacts compromise the detection of filling voids on CBCT images of canals in mandibular molars with isthmus. ACC and NT present rather similar diagnostic accuracy, even though artefact expression remains device-specific.

scholarly journals Biocompatibility of NeoMTA Plus® versus MTA Angelus as delayed furcation perforation repair materials in a dog model

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Khaled M. Abboud ◽  
Ashraf M. Abu-Seida ◽  
Ehab E. Hassanien ◽  
Hossam M. Tawfik
Keyword(s):  
Cell Count ◽  
Inflammatory Cell ◽  
Fibrous Tissue ◽  
Mineral Trioxide Aggregate ◽  
Control Group ◽  
Filling Material ◽  
Group I ◽  
Repair Materials ◽  
Significant Difference ◽  
Group Ii

Abstract Background The biocompatibility of NeoMTA Plus® (Avlon BioMed Inc., Bradenton, Fl) as a furcal perforation repair material is not fully understood. This study compares the biocompatibility of Mineral Trioxide Aggregate (MTA Angelus) and NeoMTA Plus® as delayed furcation perforation repair materials. Methods Pulpotomy and root canal obturation were performed in 72 premolars in six mongrel dogs and then a standardized furcal perforation was performed. The coronal access was left open for three weeks. After curetting, cleaning and drying of the perforations, these teeth were divided into three equal groups (N = 24 teeth/ 2 dogs each) according to the material used for perforation repair; group I: NeoMTA Plus®, group II: MTA Angelus and group III: no material (positive control). The coronal access cavities were sealed with a filling material. The inflammatory cell count and qualitative pathology (presence of calcific bridge, configuration of fibrous tissue formed, examination of tissue surrounding the furcation area, histology of intraradicular bone and the inflammatory nature of tissues) were carried out after one week (subgroup A, N = 8 teeth), one month (subgroup B, N = 8 teeth) and three months (subgroup C, N = 8 teeth). The inflammatory cell count was expressed as mean ± SD and statistically analyzed. P-value < 0.05 was considered significant. Results In all subgroups, the control group exhibited the highest number of inflammatory cell count, followed by MTA Angelus group and the least inflammatory cell count was shown by NeoMTA Plus® group. There was a significant difference in the inflammatory cell count between the NeoMTA Plus® and MTA Angelus after one week (P < 0.05) while no significant differences were recorded between them after one month and three months (P > 0.05). In contrast to group II, there was no significant differences in inflammatory cell count between the subgroups in groups I and III (P > 0.05). NeoMTA Plus® exhibited better qualitative pathological features than MTA Angelus after one week and nearly similar features after one month and three months of repair. Conclusion NeoMTA Plus® has a better early biocompatibility than MTA Angelus after one week of delayed furcation perforation repair and a similar late biocompatibility after one month and three months.

Sign in / Sign up

Export Citation Format

Share Document