scholarly journals EFEKTIVITAS PENGGUNAAN GUAR GUM PADA PEMBUATAN KERTAS ARSIP DARI PULP COTTON LINTER (The Effectiveness of The Use of Guar Gum In Archival Papermaking from Cotton Linter Pulp)

2016 ◽  
Vol 6 (01) ◽  
Author(s):  
Rina Masriani ◽  
Susi Sugesty ◽  
Taufan Hidayat ◽  
Teddy Kardiansyah
Keyword(s):  
Guar Gum ◽  
Raw Material ◽  
Cotton Linter ◽  
Quality Requirements ◽  
Paper Production ◽  
Indonesian Government ◽  
Optimum Dosage ◽  
Quality Testing ◽  
Folding Endurance

The Indonesian Government has set the regulations regarding guidelines for the use of archival paper or permanent document. The paper must meet the specifications of SNI ISO 11108. The problem of archival paper production in Indonesia is difficulty in meeting the quality requirements of permanence and durability. Paper producers in Indonesia have tried to make an archival paper using cotton linter as raw material but it still did not meet the quality requirements of permanence, especially for pH and alkaline reserve parameters. The laboratory archival papermaking experiments using guar gum and high dosage of CaCO3 has been carried out. The scope of experiments: the determination of the characteristics of cotton linter; the determination of optimum freeness of cotton linter, optimum dosage of CaCO3, and optimum dosage of guar gum; the observation of cotton linter pulp and guar gum interaction; the quality testing of archival paper from cotton linter pulp. The results showed that guar gum is effective to improve the folding endurance of paper containing high CaCO3, at least 7.5%. Archival paper produced meets the quality requirements of SNI ISO 11108.Keywords: Archival paper, CaCO3, cotton linter pulp, guar gum   ABSTRAK Pemerintah telah menetapkan peraturan mengenai pedoman penggunaan kertas untuk arsip atau dokumen permanen. Kertas arsip harus memenuhi spesifikasi SNI ISO 11108. Permasalahan produksi kertas arsip di Indonesia adalah kesulitan memenuhi syarat mutu permanensi dan durabilitas. Produsen kertas di Indonesia sudah ada yang mencoba membuat kertas arsip dari bahan baku cotton linter, namun belum memenuhi syarat mutu permanensi, yaitu pH dan cadangan alkali. Penelitian pembuatan kertas arsip menggunakan CaCO3 dosis tinggi dan guar gum telah dilakukan. Tahapan penelitian ini yaitu: pengujian karakteristik pulp cotton linter; penentuan freeness optimum, penambahan kadar CaCO3 optimum dan kadar guar gum optimum; pengamatan interaksi pulp cotton linter dan guar gum; pengujian mutu kertas arsip dari pulp cotton linter. Hasil penelitian menunjukkan guar gum efektif untuk meningkatkan parameter ketahanan lipat kertas arsip yang mengandung kadar CaCO3 minimal 7,5%. Kertas arsip yang dihasilkan memenuhi syarat mutu SNI ISO 11108.Kata kunci: kertas arsip, CaCO3, pulp cotton linter, guar gum

Investigating Nigeria Local Clay for its Marsh Funnel Viscosity and Gel Strength: A Study of Irhodo Bentonite

2021 ◽  
Vol 4 (1) ◽  
pp. 242-249
Author(s):  
FE Otitigbe
Keyword(s):  
Guar Gum ◽  
Gel Strength ◽  
Raw Material ◽  
Drilling Mud ◽  
Local Clay ◽  
Content Development ◽  
Increasing Demand ◽  
Marsh Funnel ◽  
Oil Fuel

Due to the daily increasing demand for crude oil fuel for its various capacities of energy production and utilizations, a twin respond of exploration for more hydrocarbon reserves and drilling activities was accompanied. As a result, rate and cost of importing drilling clay (Wyoming Bentonite), a major raw material in drilling mud becomes so high that hundreds of millions of dollar is incurred on company budget (Arinkoola, et al., 2020). Thus, the Federal Government of the federal republic of Nigeria, on sensing the benefits of local content development, then clamour for its use as drilling mud. This therefore becomes the bed-rock which this paper is belt on to investigate local clay for some its properties, like viscosity-gel strength. This paper also reviews the formulation of an equivalent one barrel of a laboratory drilling mud using Irhodo bentonite. This paper report two methods and devices used to determine viscosities; the marsh funnel viscosity method using Marsh Funnel and Fann Viscosity-Gel method using the Rheometer. The result of the experiment for the determination of viscosity using marsh funnel apparatus, for both local and bentonite drilling mud, and show 27.12 and 37.17sec/qt (seconds per quart). And when additives, CMC and guar-gum were added, 27.23sec/qt, 29.47sec/qt and 23.19sec/qt and 29.47sec/qt respectively obtained.

scholarly journals Determination of Terpenoid Profile in Dry Cannabis Flowers and Extracts Obtained from Different Cannabis Varietes

2021 ◽  
pp. 214-228
Author(s):  
Tijana Serafimovska ◽  
Marija Darkovska Serafimovska ◽  
Marija Mitevska ◽  
Sasho Stefanovski ◽  
Zlatko Keskovski ◽  
...  
Keyword(s):  
Analytical Method ◽  
Active Pharmaceutical Ingredient ◽  
Final Concentration ◽  
Raw Material ◽  
Pharmacological Effects ◽  
Purification Process ◽  
Alpha Pinene ◽  
Extraction And Purification ◽  
Quality Testing

Aim: The aim of this study was to determine the terpenoid profile in dried cannabis flowers obtained from different varieties of cannabis plant and in cannabis extracts in order to investigate quantity of terpenes lost during extraction and purification process. Methods: GC/MS method for determination of terpenes was verified. The concentration of terpenes was determined in dry flowers as raw material and in decarboxylated and distillated cannabis extracts, using the same GC/MS analytical method. The extraction was performed using 96% ethanol as a solvent. Results: The obtained results indicate that dry cannabis flowers from different cannabis plant can be distinguished only by their terpenoid profile. The use of standardized cannabis-based extracts can be confirmed by determination of terpenoid profile. The purification process of the cannabis extracts removes terpenes. The percentage of major terpen beta-Myrcene decreased from 68% in dry flower to 15% in decarboxylated and, 1.9% in distillated cannabis oil after purification. The percentage of second major terpene alpha-Pinene decreased from 15% in dry flower to 5% in decarboxylated and, 0.7% in distillated cannabis oil after purification. Conclusion: Terpenes act synergistically with cannabinoids. Following the monograph for quality testing of cannabis extracts in the German Pharmacopoeia, the purification process is necessary to achieve a final concentration of cannabinoids (Tetrahydrocannabinol) of more than 95% in the final active pharmaceutical ingredient. The purification process removes terpenes that have proven synergistically pharmacological effects with cannabinoids.

Resource efficiency in deinked pulp production: a review

TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI
Keyword(s):  
Waste Disposal ◽  
Resource Efficiency ◽  
Raw Material ◽  
Ecological Strategy ◽  
Recycled Paper ◽  
Paper Production ◽  
Recycled Pulp ◽  
Current State ◽  
The Cost ◽  
Pulp Production

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.

DETERMINATION OF FATTY ACIDS COMPONENTS COMPOSITION IN THYMUS X CIRIODORUS VAR. «SILVER QUEEN» HERBAL RAW MATERIAL

Fitoterapia ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 55-58
Author(s):  
J. M. Steshenko ◽  
◽  
O. V. Мazulin ◽  
G. P. Smoylovska ◽  
G. V. Mazulin ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Raw Material

pH Dependent Release Potential of Natural Polymers in Sustained Release of Ornidazole From Colon Targeted Delivery System)

2019 ◽  
Vol 9 (02) ◽  
Author(s):  
Sharma Pankaj ◽  
Tailang Mukul
Keyword(s):  
Drug Release ◽  
Delivery System ◽  
Targeted Delivery ◽  
Guar Gum ◽  
Acidic Environment ◽  
Natural Polymers ◽  
Weight Variation ◽  
Curve Determination ◽  
Preformulation Studies

The aim of present work was to prepare colon specific delivery system of Ornidazole using different ratio of shellac, zein and guar gum. From study of various literature it revealed that shellac, zein and guar gum released drug from dosage form at the pH of 6.9, 11.5, 7-9 respectively. The main problem associated with colon targeted drug delivery system is degradation of drug in the acidic environment of stomach to circumvent the present problem different combinations of shellac, zein and guar gum were employed in the formulation of colon targeted tablet. Several preformulation parameters were determined such as melting point, FTIR spectroscopy, preparation of calibration curve, determination of λmax and partition coefficient. After the preformulation studies, next steps were preparation of core tablets, evaluation of core of tablets and coating of tablets. The data obtained from preformulation study seven formulations were developed and evaluated for various parameters. Based on evaluated parameter such as weight variation, friability, dissolution study, invitro drug release etc. the F7 formulation show better results colon targeted tablets. Drug content in F7 formulation was 95% and drug release after 6 hrs was 96%. Formulation containing combination of shellac, zein and guar gum released least amount of drug in the acidic environment of stomach and released most of the drug in colon. It is evide

Liquid Chromatographic Determination of Amiodarone Hydrochloride and Related Compounds in Raw Materials and Tablets

1994 ◽  
Vol 77 (6) ◽  
pp. 1447-1453 ◽  
Author(s):  
Pauline M Lacrok ◽  
Norman M Curran ◽  
Wing-Wah Sy ◽  
Dennis K J Goreck ◽  
Pierre Thibault ◽  
...  
Keyword(s):  
Raw Materials ◽  
Chromatographic Determination ◽  
Raw Material ◽  
Liquid Chromatographic Method ◽  
Limit Of Quantitation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic ◽  
Amiodarone Hydrochloride ◽  
Related Compounds

Abstract A liquid chromatographic method for the determination of amiodarone hydrochloride and 10 related compounds in drug raw material and for assay of drug in tablets was developed. The method specifies a 3 jxm Hypersil nitrile column (150 × 4.6 mm), a mobile phase of 1 + 1 acetonitrile–ammonium acetate buffer (0.1 M adjusted to pH 6.0 with 0.1 M acetic acid), a flow rate of 1 mL/min, and detection at 240 nm. The lower limit of quantitation of the related compounds is 0.02% or less. Drug contents in 2 raw material samples were 100.1 and 99.9% and ranged from 98.2 to 99.4% in 3 tablet formulations. Impurity levels in 2 samples of raw material from different manufacturers were ca 0.4%. The presence of 3 of the known related compounds in these samples was confirmed by liquid chromatographymass spectrometry. The method applied to raw materials was evaluated by a second laboratory and found to be satisfactory.

Determination of main raw material source in bar soaps using mid-infrared spectroscopy combined with classification tools

2021 ◽  
Vol 164 ◽  
pp. 106029
Author(s):  
Diego Maciel Gerônimo ◽  
Sheila Catarina de Oliveira ◽  
Frederico Luis Felipe Soares ◽  
Patricio Peralta-Zamora ◽  
Noemi Nagata
Keyword(s):  
Infrared Spectroscopy ◽  
Raw Material ◽  
Material Source ◽  
Mid Infrared ◽  
Mid Infrared Spectroscopy

Firm Characteristics and Total Factor Productivity: Evidence from Indian Manufacturing Firms

2017 ◽  
Vol 11 (1) ◽  
pp. 77-98 ◽  
Author(s):  
Lopamudra D. Satpathy ◽  
Bani Chatterjee ◽  
Jitendra Mahakud
Keyword(s):  
Total Factor Productivity ◽  
Ordinary Least Squares ◽  
Jel Classification ◽  
Raw Material ◽  
Firm Characteristics ◽  
Manufacturing Companies ◽  
Factor Productivity ◽  
Size Of Firms ◽  
Specific Factors

Measurement of the productivity of firms is an important research issue in productivity literature. Over the years, various methods have been developed to measure firm productivity across the globe. But there is no unanimity on the use of methods, and research on the identification of factors which determine productivity has been neglected. In view of these gaps, this study aims to measure total factor productivity (TFP) and tries to identify firm-specific factors which determine productivity of Indian manufacturing companies. The study is based on data of 616 firms from 1998–99 to 2012–13. To measure TFP, the Levinsohn–Petrin (L-P) method has been employed, and the fully modified ordinary least squares (FMOLS) method has been used to identify factors that affect TFP. The results reveal that embodied and disembodied technology plays a crucial role in the determination of productivity overall in manufacturing and other sub-industries. Similarly, the size of firms and intensity of raw material imports are also important for the determination of productivity across the sub-industries. JEL Classification: C14, C33, D24, L60

scholarly journals Determination of optimum animal feed raw material order allocation

2021 ◽  
Vol 713 (1) ◽  
pp. 012001
Author(s):  
D Wahyuni ◽  
M T Sembiring ◽  
I Budiman ◽  
T Utari ◽  
C D N Silaen
Keyword(s):  
Animal Feed ◽  
Raw Material ◽  
Order Allocation
Sign in / Sign up

Export Citation Format

Share Document