scholarly journals RANCANG BANGUN SMART HOME AUTOMATIC CONTROL dengan KOMUNIKASI MELALUI BLUETOOTH HC-05 BERBASIS MIKROKONTROLER ARDUINO dan ANDROID

eLEKTRIKA ◽  
2017 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Yohan Erwinnanto ◽  
Andi Kurniawan N ◽  
Sri Heranurweni
Keyword(s):  
Automatic Control ◽  
Data Transmission ◽  
Smart Home ◽  
Room Temperature ◽  
Energy Savings ◽  
Building Design ◽  
Test Results ◽  
Android Application ◽  
Dc Motors ◽  
Cold Room

<p><strong>D</strong>esign of Smart Home Automatic Control with Communications Via Bluetooth HC-05-Based Microcontroller Arduino and Android, will provide all the comfort, safety, security and energy savings, which takes place automatically and programmed via microcontroller, the house or building. Design of Smart Home Automatic with Control Communications Via Bluetooth HC-05-Based Microcontroller Arduino and Android is intended for automatic control processes.</p><p>The system consists of seven sensors, keypad password for security doors, HC-05 Bluetooth GSM alarm application and device control applications aktuaktor, and aktuaktor buzzer, dc motors, lights, fans and fan dc exhausting. Among these sensors is a PIR sensor to detect theft, sensor MQ6 to detect leakage of LPG gas and smoke from fires, sensor HC-SR04 ultrasonic for automatic garage doors, fire sensors to detect a fire, the sensor LM35 to detect the temperature of the room, when the room temperature is hot the fan will be on automatically, when the cold room temperature will shut off the fan and LDR sensor to detect the intensity of light during the day which turn the lights off automatically and vice versa, thus saving energy. Homeowners can also control lights and monitoring sensors with android phones that are connected with communication via Bluetooth HC-05 microcontroller arduino, and can receive GSM alarm application sensors such as calling and sms.</p><p>Test results are used UART communication data transmission between the microcontroller serial monitor monitor has an error of 0 % . HC - 05 Bluetooth can accept orders at the farthest distance of 11 meters . The fire sensor can work well when the fire was 1-10 cm . Sensor HC - SR04 is already working with an error rate of 0.3 %, so the accuracy of this tool by 100 % - 0.3 % = 99.7 % .</p><p><strong>Keywords :</strong> Security Door , Bluetooth HC - 05 , Microcontroller Arduino and Android , Application Control and Application GSM alarm.</p>

scholarly journals SISTEM MONITORING PENGONTROL SUHU DAN INTENSITAS CAHAYA PADA PENETAS TELUR PUYUH

2018 ◽  
Vol 6 (1) ◽  
Author(s):  
Ibrahim Rizki ◽  
Kustanto Kustanto ◽  
Sri Siswanti
Keyword(s):  
Automatic Control ◽  
Monitoring System ◽  
Room Temperature ◽  
Test Results ◽  
Climate Control ◽  
Egg Hatch ◽  
Temperature Conditions ◽  
Temperature And Humidity ◽  
The Creation ◽  
Hatching Eggs

Hatching egg is important in the creation of excellent seeds. The accuracy of care of room temperature conditions and microcontroller-based monitoring system is one of the first steps to meet the needs of quality quail seeds in the market. At the same time naturally, it is very difficult, because the parent quail is only able to incubate about 5 eggs. The use of automatic egg hatchery is one of the solutions. In this Scripsir research is made automatic quail egg machine based on microcontroller atmega328. The control is able to control the temperature and humidity needed in hatching eggs. From the control result using a microcontroller, lamp and fan can be adjusted according to the temperature of the room on the egg hatch is by automatic control of the lamp life and the fan. Test results showed that an increase in hatching eggs by 13%.Keywords: Hatching eggs, Monitoring system, Climate control, Microcontroller.

EVALUASI ANR PADA TRANSMISI DATA NETWORK TERHADAP WP-REST API DALAM APLIKASI ANDROID

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Agung Riyadi
Keyword(s):  
Large Data ◽  
Data Retrieval ◽  
Test Results ◽  
Android Application ◽  
Retrieval Process ◽  
Request Queue ◽  
Plant Data ◽  
Android Development ◽  
Rest Api ◽  
The One

The One of many way to connect to the database through the android application is using volleyball and RESTAPI. By using RestAPI, the android application does not directly connect to the database but there is an intermediary in the form of an API. In android development, Android-volley has the disadvantage of making requests from large and large data, so an evaluation is needed to test the capabilities of the Android volley. This research was conducted to test android-volley to retrieve data through RESTAPI presented in the form of an application to retrieve medicinal plant data. From the test results can be used by volley an error occurs when the back button is pressed, in this case another process is carried out if the previous volley has not been loaded. This error occurred on several android versions such as lollipops and marshmallows also on some brands of devices. So that in using android-volley developer need to check the request queue process that is carried out by the user, if the data retrieval process by volley has not been completed, it is necessary to stop the process to download data using volley so that there is no Android Not Responding (ANR) error.Keywords: Android, Volley, WP REST API, ANR Error

scholarly journals Enhanced preservation of vacuum-packaged Atlantic salmon by hyperbaric storage at room temperature versus refrigeration

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Liliana G. Fidalgo ◽  
Mário M. Q. Simões ◽  
Susana Casal ◽  
José A. Lopes-da-Silva ◽  
Ivonne Delgadillo ◽  
...  
Keyword(s):  
Atlantic Salmon ◽  
Microbial Activity ◽  
Room Temperature ◽  
Energy Savings ◽  
Textural Properties ◽  
Storage Conditions ◽  
Volatile Profile ◽  
Fragmentation Index ◽  
C 30 ◽  
Water Holding

AbstractHyperbaric storage at room temperature (HS/RT: 75 MPa/25 °C) of vacuum-packaged fresh Atlantic salmon (Salmo salar) loins was studied for 30 days and compared to atmospheric pressure at refrigerated temperatures (AP/5 °C, 30 days) and RT (AP/25 °C, 5 days). Most of the fatty acids were not affected by storage conditions, with only a slight decrease of docosahexaenoic acid (DHA) content (n-3 polyunsaturated fatty acid) for AP samples, reflected in the lower polyene index values obtained and higher oxidation extent. For HS, a lower lipid oxidation extension and a slower increase of myofibrillar fragmentation index values were observed, when compared to AP samples. The volatile profile was similar for the HS and fresh samples, with the HS samples retaining fresh-like alcohols and aldehydes components, which disappeared in AP samples, mainly in AP/25 °C samples. The volatile profile for AP samples (5 and 25 °C) revealed mostly spoilage-like compounds due to microbial activity. Drip loss increased progressively during the 30 days of storage under HS, while a slight decrease of water holding capacity after 5 days was observed, increasing further after 30 days. Regarding textural properties, only resilience was affected by HS, decreasing after 30 days. So, HS/RT could represent an interesting extended preservation methodology of fresh salmon loins, since allows retaining important physicochemical properties for at least 15 days, while refrigeration after 5 days showed already volatile spoilage-like compounds due to microbial activity. Furthermore, this methodology allows additional considerable energy savings when compared to refrigeration.

Evaluation methods of the daylight performance and potential energy saving of tubular daylight guide systems: A review

2021 ◽  
pp. 1420326X2199241
Author(s):  
Hanlin Li ◽  
Dan Wu ◽  
Yanping Yuan ◽  
Lijun Zuo
Keyword(s):  
Potential Energy ◽  
Energy Saving ◽  
Energy Savings ◽  
Performance Metrics ◽  
Field Measurements ◽  
Building Design ◽  
Estimation Methods ◽  
The Past ◽  
Potential Energy Saving ◽  
Daylight Performance

In the past 30 years, tubular daylight guide systems (TDGSs) have become one of the most popular ways to transport outdoor natural light into the inner space in building design. However, tubular daylight guide systems are not widely used because of the lack of methods to evaluate methods on the suitability of the TDGSs. This study therefore summarizes the daylight performance metrics of TDGSs and presents the estimation methods in terms of field measurements, simulation and empirical formulae. This study focuses on the daylight performance and potential energy savings of TDGSs. Moreover, this study will be helpful for building designers to build healthy, comfortable and energy-saving indoor environment.

Laboratory formation of border ice and frazil slush

1977 ◽  
Vol 4 (2) ◽  
pp. 153-160 ◽  
Author(s):  
T. O'D. Hanley ◽  
B. Michel
Keyword(s):  
Room Temperature ◽  
Variable Speed ◽  
Water Ice ◽  
Air Temperatures ◽  
Cold Room ◽  
Rate Of Increase ◽  
Steel Tank ◽  
Cylindrical Steel ◽  
Variable Speed Motor ◽  
Water Speed

Ice formation under controlled conditions was studied in a cold room using a cylindrical steel tank 120 cm in diameter and 76 cm deep. Paddles turned by a variable speed motor moved the water about the axis of the tank. Twenty-one thermistors were used to record temperatures above and below the surface of the water. Ice was allowed to form with the cold room temperature held at −2 °C, −5 °C, −10 °C, and −20 °C and with water speeds (measured 4 cm from the tank wall) from 0 to 73 cm/s.At zero water speed ice formed first as needles randomly oriented over the surface. With flowing water, border ice width increased linearly with time, but independently of water speed. The rate of increase of the border width w fits the equation dw/dt = (4/9)|Ta|0.68 where Ta is the Celsius air temperature.Frazil was never observed at water speeds less than 24 cm/s, but was always formed at this or greater speeds, regardless of cold room temperature. The volume of slush accumulated was greater at greater water speeds and at colder air temperatures. Observed slush volumes are compared with semiempirical values of the ice mass obtained from theoretical equations. The data suggest that growth of ice crystals began when the water was supercooled by approximately 0.02 °C.

scholarly journals Effect of Substrate Plate Heating on the Microstructure and Properties of Selective Laser Melted Al-20Si-5Fe-3Cu-1Mg Alloy

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 330
Author(s):  
Pan Ma ◽  
Pengcheng Ji ◽  
Yandong Jia ◽  
Xuerong Shi ◽  
Zhishui Yu ◽  
...  
Keyword(s):  
Room Temperature ◽  
Internal Stresses ◽  
Test Results ◽  
Laser Melting ◽  
Microstructure And Properties ◽  
Uniform Microstructure ◽  
Heat Treated ◽  
Fine Microstructure ◽  
Plate Heating ◽  
Substrate Plate

The Al-20Si-5Fe-3Cu-1Mg alloy was fabricated using selective laser melting (SLM). The microstructure and properties of the as-prepared SLM, post-treated SLM, and SLM with substrate plate heating are studied. The as-prepared SLM sample shows a non-uniform microstructure with four different phases: fcc-αAl, eutectic Al-Si, Al2MgSi, and δ-Al4FeSi2. With thermal treatment, the phases become coarser and the δ-Al4FeSi2 phase transforms partially to β-Al5FeSi. The sample produced with SLM substrate plate heating shows a relatively uniform microstructure without a distinct difference between hatch overlaps and track cores. Room temperature compression test results show that an as-prepared SLM sample reaches a maximum strength (862 MPa) compared to the heat-treated (524 MPa) and substrate plate heated samples (474 MPa) due to the presence of fine microstructure and the internal stresses. The reduction in strength of the sample produced with substrate plate heating is due to the coarsening of the microstructure, but the plastic deformation shows an improvement (20%). The present observations suggest that substrate plate heating can be effectively employed not only to minimize the internal stresses (by impacting the cooling rate of the process) but can also be used to modulate the mechanical properties in a controlled fashion.

Cryogenic Interlaminar Properties of PBO Fiber/Epoxy Composites

2011 ◽  
Vol 391-392 ◽  
pp. 1445-1449
Author(s):  
Chun Hua Zhang ◽  
Shi Lin Luan ◽  
Xiu Song Qian ◽  
Bao Hua Sun ◽  
Wen Sheng Zhang
Keyword(s):  
Liquid Nitrogen ◽  
Room Temperature ◽  
Liquid Nitrogen Temperature ◽  
Epoxy Composites ◽  
Bending Test ◽  
Test Results ◽  
Sem Images ◽  
Three Point Bending ◽  
Pbo Fiber ◽  
Interlaminar Shear

The influences of low temperature on the interlaminar properties for PBO fiber/epoxy composites have been studied at liquid nitrogen temperature (77 K) in terms of three point bending test. Results showed that the interlaminar shear strength at 77 K were significantly higher than those at room temperature (RT). For the analysis of the test results, the tensile behaviors of epoxy resin at both room temperature and liquid nitrogen temperature were investigated. The interface between fiber and matrix was observed using SEM images.

Effects of B Vitamins, Liver and Yeast on Growth under Cold Room and Room Temperature Conditions

1948 ◽  
Vol 35 (1) ◽  
pp. 39-48 ◽  
Author(s):  
E. D. Smith ◽  
B. H. Ershoff ◽  
R. J. Winzler ◽  
H. J. Deuel
Keyword(s):  
Room Temperature ◽  
B Vitamins ◽  
Temperature Conditions ◽  
Cold Room

The Application and Design of the Smart Home Wireless Bus Protocol Based on the NRF24L01

2011 ◽  
Vol 271-273 ◽  
pp. 991-994
Author(s):  
Qing Fu Huang ◽  
Jian Wu Yang ◽  
Zhi Cheng Chen
Keyword(s):  
Data Transmission ◽  
Wireless Lan ◽  
Smart Home ◽  
Transmission Mechanism ◽  
Wireless Technology ◽  
Technology And Society ◽  
Modbus Protocol

With the development of the technology and society, the resolution of the wireless LAN would be the direction which is leading the smart home LAN’s construction, the IR, RF, Bluetooth, Zigbee, GPRS, and others wireless methods have been applied in the smart home smoothly, like the control, security, data transmission, now it is time to specified the rules for the wireless technology in the smart home, this paper introduces a kind of the smart home wireless bus protocol that based on the Modbus protocol, and the hardware and PC software have been designed for it, the project achieved the operation and communication among the nodes, the test realizes that it has the better data transmission mechanism when adopting the wireless bus protocol, and make sure the reliability of the data transmission between the nodes in the smart home.

Sign in / Sign up

Export Citation Format

Share Document